aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-11-10Merge tag 'u-boot-stm32-20211110' of ↵WIP/10Nov2021Tom Rini43-304/+226
https://source.denx.de/u-boot/custodians/u-boot-stm - DHSOM update: - Remove nWP GPIO hog - Increase SF bus frequency to 50Mhz and enable SFDP - Disable video output for DHSOM - Disable EFI - Enable DFU_MTD support - Create include file for STM32 gpio driver private data - Split board and SOC STM32MP15 configuration - Device tree alignement with v5.15-rc6 for STM32MP15 - Add binman support for STM32MP15x - Normalise newlines for stm32prog - Update OTP shadow registers in SPL
2021-11-10stm32mp15: tidy up #ifdefs in cpu.cPatrick Delaunay1-19/+15
We should avoid #ifdef in C modules and the unused functions are eliminated by the linker. Use the more readable IS_ENABLE() instead. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10stm32mp15: replace CONFIG_TFABOOT when it is possiblePatrick Delaunay6-30/+25
In some part of STM32MP15 support the CONFIG_TFABOOT can be replaced by other config: CONFIG_ARMV7_PSCI and CONFIG_ARM_SMCCC. This patch also simplifies the code in cpu.c, stm32mp1_ram.c and clk_stml32mp1.c as execution of U-Boot in sysram (boot without SPL and without TFA) is not supported: the associated initialization code is present only in SPL. This cleanup patch is a preliminary step to support SPL load of OP-TEE in secure world, with SPL in secure world and U-Boot in no-secure world. Reported-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10stm32mp15: remove configs dependency on CONFIG_TFABOOTPatrick Delaunay10-6/+15
Remove the dependency on CONFIG_TFABOOT in stm32mp Kconfig - always activate the ARCH config: CONFIG_ARCH_SUPPORT_PSCI and CONFIG_CPU_V7_HAS_NONSEC - CONFIG_ARMV7_NONSEC is deactivated in trusted defconfig - the correct sysreset driver is activated in each defconfig: CONFIG_SYSRESET_PSCI or SYSRESET_SYSCON Reported-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10arm: stm32mp: bsec: Update OTP shadow registers in SPLPatrick Delaunay2-3/+10
Currently the upper OTP (after 57) are shadowed in U-Boot proper, when TFABOOT is not used. This choice cause an issue when U-Boot is not executed after SPL, so this BSEC initialization is moved in SPL and no more executed in U-Boot, so it is still executed only one time. After this patch this BSEC initialization is done in FSBL: SPL or TF-A. To force this initialization in all the case, the probe of the BSEC driver is forced in SPL in the arch st32mp function: spl_board_init(). Even if today BSEC driver is already probed in STM32MP15x clock driver clk_stm32mp1.c because get_cpu_type() is called in stm32mp1_get_max_opp_freq() function. Reported-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10ARM: stm32: Align mtdparts with SPI NOR layout on DHSOMMarek Vasut3-2/+4
The DHSOM uses different SPI NOR layout than the ST devkit, stop pulling in the ST specific runtime mtdparts settings and adjust the mtdparts accordingly. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10ARM: stm32: Disable video output on DHSOMMarek Vasut2-26/+2
The video output support is unused and disabling it saves about 20 kiB of space. In case video output support is required, it can be re-enabled. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10ARM: stm32: Disable EFI on DHSOMMarek Vasut2-0/+8
The EFI support is unused and disabling it saves about 70 kiB of space. In case EFI support is required, it can be re-enabled. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10ARM: stm32: Increase default SF bus frequency to 50 MHz and enable SFDPMarek Vasut2-2/+6
Increase default SPI NOR bus frequency from 1 MHz to 50 MHz and enable SFDP parsing to obtain more accurate SPI NOR configuration. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10ARM: dts: stm32: Drop nWP GPIO hog on DHSOMMarek Vasut2-18/+0
The nWP GPIO hog was used to unlock the SPI NOR write protect when U-Boot used to operate the SPI NOR in 1-1-1 mode. Now that the SPI NOR is operated in 1-1-4 mode, the hog has adverse effects and causes transfer corruption, since the hogged pin is also the IO2 pin. Remove the hogs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10ARM: stm32: Enable DFU MTD support on DHSOMMarek Vasut2-0/+4
All the STM32MP1 based DHSOM have SPI NOR from which they boot, enable DFU_MTD support to make it possible to expose that SPI NOR via the DFU. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10gpio: stm32: create include file for driver private dataPatrick Delaunay12-137/+7
The stm32 gpio driver private data are not needed in arch include files, they are not used by code except for stm32 gpio and pincontrol drivers, using the same IP; the defines for this IP is moved in a new file "stm32_gpio_priv.h" in driver/gpio. This patch avoids to have duplicated file gpio.h for each SOC in MPU directory mach-stm32mp and in each MCU directory arch-stm32* and allows to remove CONFIG_GPIO_EXTRA_HEADER for all STM32. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-11-10board: stmp32mp1: split board and SOC STM32MP15 configurationPatrick Delaunay8-27/+87
Add a configuration file "stm32mp15_st_common.h" to handle the STMicroelectronics boards configuration and rename stm32mp1.h to "stm32mp15_common.h" to handle the generic STM32MP15x series configuration. The configuration file "dh_stm32mp1.h" is also renamed to "stm32mp15_dh_dhcom" for the configuration of board based on the dhelectronics STM32MP15x SOM. In the STMicroelectronics board configuration the default bootcmd "bootcmd_stm32mp" is updated to only select the extlinux file found on SD-Card on STM32MP15x EV1 for boot from NOR device. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-11-10arm: dts: stm32mp15: alignment with v5.15-rc6Patrick Delaunay2-8/+8
Device tree alignment with Linux kernel v5.15-rc6 - Set {bitclock,frame}-master phandles on ST DKx - Add coprocessor detach mbox on stm32mp15x-dkx boards - Add coprocessor detach mbox on stm32mp157c-ed1 board Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-11-10Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini4-114/+200
- Minor kwboot improvements (Pali) - Misc kwbimage improvements (Pali) - pci_mvebu: Use global MBUS_PCI_MEM_SIZE macro (Pali)
2021-11-10stm32mp: add binman support for STM32MP15xPatrick Delaunay12-29/+39
Use binman to add the stm32image header on SPL binary for basic boot or on U-Boot binary when it is required, i.e. for TF-A boot without FIP support, when CONFIG_STM32MP15x_STM32IMAGE is activated. The "binman" tool is the recommended tool for specific image generation. This patch allows to suppress the config.mk file and it is a preliminary step to manage FIT generation with binman. The init_r parsing of U-Boot device tree to search the binman information is not required for STM32MP15, so the binman library can be removed in U-Boot (CONFIG_BINMAN_FDT is deactivated). Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-11-10stm32mp: stm32prog: Normalise newlinesWilliam Grant1-2/+1
The missing trailing newline could confuse check-config.sh if the definition of an option was on the first line of the next file that find(1) happened to return. Signed-off-by: William Grant <wgrant@ubuntu.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-11-10tools: kwbimage: Properly set srcaddr in kwbimage v0Pali Rohár1-0/+22
Field srcaddr in kwbimage v0 needs to be adjusted similarly like in v1. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-10tools: kwbimage: Properly calculate and align kwbimage v0 header sizePali Rohár1-8/+16
Kwbimage v0 has similar alignment requirements as v1. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-10tools: kwbimage: Fill the real header size into the main headerPali Rohár1-0/+9
Fill the real header size without padding into the main header This allows to reduce final image when converting image to another format which does not need additional padding. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-10tools: kwbimage: Align kwbimage header to proper sizePali Rohár1-5/+22
Currently kwbimage header is always aligned to 4096 bytes. But it does not have to be aligned to such a high value. The header needs to be just 4-byte aligned, while some image types have additional alignment restrictions. This change reduces size of kwbimage binaries by removing extra padding between header and data part. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-10tools: kwbimage: Do not put final image padding to the image data sizePali Rohár1-9/+21
This change allows to convert image from one format to another without need to include unnecessary padding (e.g. when target image format has smaller alignment requirement as source image format). Do it by storing real image data size without padding to the kwbimage header. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-10tools: kwbimage: Align final UART image to 128 bytesPali Rohár1-0/+3
xmodem block size is 128 bytes, therefore it is possible to transfer only images with size multiple of 128 bytes. kwboot automatically pads image with zero bytes at the end to align it to 128 bytes boundary. Do this padding when generating image to allow uploading with other xmodem tools or older kwboot versions. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-10tools: kwbimage: Remove unused enums and prototypesPali Rohár2-23/+1
There are more unused enums and function prototypes. Remove them. The function kwbimage_check_params() does not return enum kwbimage_cmd_types, but a boolean value returned as int. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-10tools: kwbimage: Fix validation of kwbimage v0Pali Rohár1-37/+43
kwbimage v0 sldo has 32-bit data checksum at the end like kwbimage v1. Use same data checksum validation for both v0 and v1 image types. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-10tools: kwbimage: Set BOOT_FROM by default to SPIPali Rohár1-17/+15
kwbimage must have valid blockid member instead of zero value. Thus if config file does not contain BOOT_FROM command, use by default the value for SPI booting (which is probably the most common). Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-10tools: kwbimage: Explicitly set version also for kwbimage v0Pali Rohár2-1/+3
For documentation purposes update struct main_hdr_v0 to include information where version of the image must be stored. For kwbimage v0 it obviously must be 0. By default all image header memory is initialized to zero, therefore this change has no functional effect. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-10tools: kwbimage: Add support for new commands UART_PORT and UART_MPPPali Rohár1-1/+19
These two commands allow to specify custom setting of UART port used for printing BootROM messages. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-10pci: pci_mvebu: Use global MBUS_PCI_MEM_SIZE macroPali Rohár1-6/+5
Header file mach/cpu.h already defines MBUS_PCI_MEM_SIZE macro which defines size of MBUS_PCI_MEM_BASE window. So use global MBUS_PCI_MEM_SIZE macro instead of locally defined PCIE_MEM_SIZE macro. Both macros have same definition. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-10tools: kwboot: Always print kwboot versionPali Rohár1-1/+2
It is useful to see kwboot version in the boot log output for debugging purposes. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-10tools: kwboot: Fix sending Kirkwood v0 imagesPali Rohár1-6/+19
Properly calculate and align image header size to xmodem block size. Kirkwood v0 images do not have stored total size of header in header structure itself like it is for v1 images. So kwbheader_size() calculates size by traversing image structure itself. Aligning is done in kwboot by putting zero padding bytes between the header and data part. Signed-off-by: Pali Rohár <pali@kernel.org> Tested-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-11-09Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxiTom Rini1-0/+1
- watchdog: don't autostart watchdog on Sunxi boards
2021-11-10watchdog: don't autostart watchdog on Sunxi boardsHeinrich Schuchardt1-0/+1
The Sunxi boards only support a 16 second watchdog timeout. This is too short to boot Linux. The UEFI specification requires 300 seconds as default timeout. Change the default for CONFIG_WATCHDOG_AUTOSTART for ARCH_SUNXI. Fixes: b147bd3607f8 ("sunxi: Enable watchdog timer support by default") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-11-09Merge https://source.denx.de/u-boot/custodians/u-boot-samsungTom Rini5-13/+20
[trini: Migrate CONFIG_EXYNOS7420 as part of merging, so espresso7420 still builds] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-09exynos: mmu: use CONFIG_IS_ENABLEDMinkyu Kang1-5/+6
to fix following checkpatch warnings. Use 'if (IS_ENABLED(CONFIG...))' instead of '#if or #ifdef' where possible Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Cc: Dzmitry Sankouski <dsankouski@gmail.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-11-09exynos78x0: pinctrl: set const to structsMinkyu Kang1-7/+7
to fix following checkpatch warings. WARNING: struct should normally be const Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Cc: Dzmitry Sankouski <dsankouski@gmail.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-11-09exynos: pwm: Deal with a PWM at 100%Simon Glass1-0/+4
At present the counter never hits the comparitor in this case. Add a special case. This ensures that the snow backlight works when at full brightness. Fixes: 76c2ff3e5fd video: backlight: fix pwm's duty cycle calculation Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2021-11-08Merge https://source.denx.de/u-boot/custodians/u-boot-riscvWIP/08Nov2021Tom Rini6-11/+45
2021-11-08Fix syntax errorLeo Yu-Chi Liang1-1/+1
This statement has an unmatched parentheses, fix it. Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-11-08riscv: ae350: Use #if defined instead of CONFIG_IS_ENABLEDLeo Yu-Chi Liang1-2/+2
According to ./include/linux/kconfig.h, CONFIG_IS_ENABLED(OF_BOARD) expands to 0 when CONFIG_SPL_BUILD is defined because there is no CONFIG_SPL_OF_BOARD. Use #if defined instead. Fixes: 2e8d2f88439d ("riscv: Remove OF_PRIOR_STAGE from RISC-V boards") Signed-off-by: Leo Yu-Chi Liang <ycliang@andestech.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-11-08riscv: add #define in asm/io.h for some device driversWei Fu1-0/+4
This patch adds memcpy_fromio and memcpy_toio definitions for some device drivers which have these definitions, like cadence_qspi_apb.c Signed-off-by: Wei Fu <wefu@redhat.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-11-08cmd: sbi: show SBI implementation versionHeinrich Schuchardt1-8/+18
Let the sbi command show the SBI implementation version Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-11-08riscv: function to retrieve SBI implementation versionHeinrich Schuchardt2-0/+20
Provide function sbi_get_impl_version() to retrieve the SBI implementation version. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> Reviewed-by: Rick Chen <rick@andestech.com>
2021-11-07Merge tag 'efi-2022-01-rc2' of ↵Tom Rini39-183/+2582
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2022-01-rc2 Documentation: * improve description of mmc rescan * remove obsolete PPC documenation UEFI * Provide unit test for the EFI_TCG2_PROTOCOL * Implement add EFI_TCG2_PROTOCOL.SubmitCommand * Start the implementation of a 64 bit EFI app * Reduce rcar3_salvator-x image size
2021-11-07dfu: newline after updatingHeinrich Schuchardt1-0/+1
Currently output of dfu commands ends on a line with leading hash signs ('#'). The succeeding output should be placed on a new line. After writing updates via dfu print a new line. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-11-07ARM: renesas: reduce rcar3_salvator-x image sizeHeinrich Schuchardt1-0/+1
rcar3_salvator-x u-boot.img is very close to the 0x100000 size limit. Disable support for Unicode capitalization. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-11-07efi_selftest: add selftest for EFI_TCG2_PROTOCOL and Measured BootMasahisa Kojima7-1/+2023
This commit adds the missing EFI_TCG2_PROTOCOL selftest and Measured Boot selftest in lib/efi_selftest. This selftest includes PE/COFF image measurement test, some PCR values are different in each architecture. With that, this commit also adds pre-built versions of lib/efi_selftest/efi_miniapp_file_image_exit.c for PE/COFF image measurement test for 32-bit arm, arm64, ia32, x86_64, riscv32 and riscv64. Prebuilding avoids the problem of reproducible builds. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Make the test 'onrequest'. Add code comments to the includes with the binaries. Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-11-07efi: Add video support to the appSimon Glass6-13/+50
The current EFI video driver only works when running in the stub. In that case the stub calls boot services (before jumping to U-Boot proper) and copies the graphics info over to the efi table. This is necessary because the stub exits boot services before jumping to U-Boot. The app maintains access to boot services throughout its life, so does not need to do this. Update the driver to support calling boot services directly. Enable video output for the app. Note that this uses the EFI_GRAPHICS_OUTPUT_PROTOCOL protocol, even though it mentions vesa. A sample qemu command-line for this case is: qemu-system-x86_64 -bios /usr/share/edk2.git/ovmf-ia32/OVMF-pure-efi.fd -drive id=disk,file=try.img,if=none,format=raw -nic none -device ahci,id=ahci -device ide-hd,drive=disk,bus=ahci.0 Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-11-07efi: Add a way to obtain boot services in the appSimon Glass2-1/+17
Add a function to return this information along with a stub for the efi_info_get() function, since calling it otherwise hangs U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-11-07x86: Don't duplicate global_ptr in 64-bit EFI appSimon Glass3-14/+26
This variable is already defined by the EFI code. Drop the duplicate definition when building a 64-bit EFI app. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
generated by cgit v1.1 at 2024-10-12 03:01:51 +0000