aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-10-08arm: rmobile: bugfix: wrong register saving in lowlevel_initTetsuyuki Kobayashi1-11/+1
lowlevel_init() of rmobile badly assumed that ip register holds return address. The commit "63ee53a7 armv7 cpu_init_crit: Simplify code" breaks this assumption. This patch removes this bad assumption and simplify code. Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
2012-10-08ide: Correct IDE_BUS(dev) macroLuka Perkov1-1/+1
The IDE_BUS(dev) macro was previously doing dev >> 1. This however is a mis-match of the usage in common/cmd_ide.c and would cause boards with multiple ports / devices to not correctly detect all devices. For more details please see: http://lists.denx.de/pipermail/u-boot/2012-April/122525.html [Tom Rini: Reword commit message only] Tested-by: Luka Perkov <uboot@lukaperkov.net> Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Tom Rini <trini@ti.com>
2012-10-08GPIO: pca953x: fix error reportingLaurence Withers1-14/+35
Use the standard CMD_RET_* constants to clearly report errors from the pca953x command. In addition, print error messages when I2C communication fails. Signed-off-by: Laurence Withers <lwithers@guralp.com>
2012-10-08GPIO: pca953x: fix spelling in helpLaurence Withers1-1/+1
Signed-off-by: Laurence Withers <lwithers@guralp.com>
2012-10-08ml507: Fix Xilinx uartlite driver hangRommel Custodio1-1/+1
The default configuration for ml507 will generate a hang() in the Xilinx uartlite driver. userial_ports[] in drivers/serial/serial_xuartlite.c does not get initialized properly. CONFIG_SERIAL_BASE is unused. XILINX_UARTLITE_BASEADDR is used instead. Signed-off-by: Rommel Custodio <sessyargc+uboot@gmail.com>
2012-10-05Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2-0/+3
2012-10-05arm: armv7: temporarily set -mno-unaligned-accessAlbert ARIBAUD1-0/+2
This patch aims at ensuring that the 2012.10 release works out-of-the-box on as many targets as possible, by reinstating commit 5347560f5427bcdd48a563b62180481606ac8044, which adds option -mno-unaligned-access to armv7 builds. This patch will be overriden immediately after release of 2012.10.
2012-10-05MAINTAINERS: Add Tetsuyuki Kobayshi for kzm9gTetsuyuki Kobayashi1-0/+1
Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
2012-10-05env: fix crash using default -f -aGerlando Falauto1-0/+3
env default -a -f calls env_check_apply on all existing environment variables with a NULL value for "newval" as a way of cleaning up. This causes string manipulation functions to crash on most architectures. So replace a NULL argument with an empty string. Reported-By: Stefano Babic <sbabic@denx.de> Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Tested-by: Stefano Babic <sbabic@denx.de>
2012-10-05Improve license declaration for cmd_ini.hJoe Hershberger1-2/+30
Instead of referenceing the source webpage (which can change) include the license in the source file. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reported-by: Igor Grinberg <grinberg@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Acked-by: Wolfgang Denk <wd@denx.de>
2012-10-05MPC85xx: remove support for TQM85xx boardsWolfgang Denk11-2590/+8
Due to grown code sizes the TQM85xx boards don't build any more with some older tool chains (like ELDK 4.2). As these boards have long reached EOL it seems a waste of effort trying to fix them. The vendor has agreed to drop support for them, too. So let's get rid of them. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> cc: Kim Phillips <kim.phillips@freescale.com> Acked-by: Stefan Roese <sr@denx.de>
2012-10-05sh: ap_sh4a_4a: Fixed initialization value of DDR memoryNobuhiro Iwamatsu1-1/+1
The wrong value was set as value of column of DDR memory for ap_sh4a_4a. 10 is the right value. This fixed this problem. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2012-10-04Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini150-179/+13849
2012-10-04ARM: Add Altera SOCFPGA Cyclone5Dinh Nguyen16-0/+901
Add minimal support for Altera's SOCFPGA Cyclone 5 hardware. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: Chin Liang See <clsee@altera.com> Signed-off-by: Pavel Machek <pavel@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Tom Trini <trini@ti.com> Cc: Wolfgang Denx <wd@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Stefan Roese <sr@denx.de> ---- v8: Remove no_return attribute for reset_cpu Based on v2012.10-rc2
2012-10-04snowball: Clear UART RX FIFORamesh Chandrasekaran1-0/+4
Without usb-serial cable plugged at this stage, some garbage is seen in UART RX FIFO, which blocks autoboot progress. The fix makes sure to empty the RX FIFO, before we wait for user input to interrupt autoboot. Signed-off-by: Ramesh Chandrasekaran <ramesh.chandrasekaran@stericsson.com>
2012-10-04xilinx: Add new Zynq boardMichal Simek5-0/+225
Add support for Xilinx Zynq board. Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Marek Vasut <marex@denx.de> CC: Joe Hershberger <joe.hershberger@gmail.com>
2012-10-04arm: Support new Xilinx Zynq platformMichal Simek3-0/+232
Add timer driver. Signed-off-by: Michal Simek <monstr@monstr.eu> CC: Joe Hershberger <joe.hershberger@gmail.com> CC: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de>
2012-10-04serial: Add Zynq serial driverMichal Simek4-0/+261
The driver is used on Xilinx Zynq platform. Signed-off-by: Michal Simek <monstr@monstr.eu> CC: Joe Hershberger <joe.hershberger@gmail.com> CC: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de>
2012-10-04arm: Fixed the offset for the no relocation.Zhong Hongbo12-0/+12
When the u-boot address of destination equal to __start, no relocation. relocation offset(r9) = 0. Signed-off-by: Zhong Hongbo <bocui107@gmail.com> Tested-by: Stefano Babic <sbabic@denx.de>
2012-10-04arm: Add CONFIG_OF_BOARD_SETUP support to bootmJoe Hershberger1-0/+3
ARM boards need to change device tree settings as well Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-04arm: Remove additional config flagsMichal Simek2-10/+0
These options are just duplicated from arch/arm/cpu/armv7/config.mk Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-10-04armv7 cpu_init_crit: Simplify codeBenoît Thébaudeau1-4/+1
We don't need to return to cpu_init_crit after calling lowlevel_init, so lowlevel_init can directly return to the caller of cpu_init_crit. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
2012-10-04arm: work around assembler bugAllen Martin1-0/+18
Disable sibling call optimization based on binutils version. This is to work around a bug in the assember in binutils versions < 2.22. Branches to weak symbols can be incorrectly optimized in thumb mode to a short branch (b.n instruction) that won't reach when the symbol gets preempted. http://sourceware.org/bugzilla/show_bug.cgi?id=12532 Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Tom Rini <trini@ti.com>
2012-10-04tools, config.mk: add binutils-versionAllen Martin2-0/+21
Modeled after gcc-version, add function to get binutils version. Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Wolfgang Denk <wd@denx.de>
2012-10-04ARM: increase lmb stack space reservation to 4KBRob Herring1-2/+2
The bootm initrd image copy to ram can collide with the stack in cases where the print buffer size is large (i.e. 1K). The result is intermittent initrd decompression errors depending on the initrd size MOD 4KB since the initrd start address is 4KB aligned. Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-10-04ARM: Add X600 board support (SPEAr600 based)Stefan Roese7-0/+816
This patch adds support for the X600 SPEAr600 based board. Its also the first SPEAr600 board that uses the newly introduced SPEAr600 SPL support. Xloader is not necessary any more. By using the new "u-boot.spr" make target, one image will generated containing both, U-Boot SPL (with mkimage header as needed by the SPEAr BootROM, and the main U-Boot with mkimage header. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Amit Virdi <amit.virdi@st.com> Cc: Vipin Kumar <vipin.kumar@st.com>
2012-10-03ext4: Rename block group descriptor table from gd to bgdSimon Glass3-91/+95
On x86 machines gd is unfortunately a #define, so we should avoid using gd for anything. This patch changes uses of gd to bgd so that ext4fs can be used on x86. A better fix would be to remove the #define in x86, but I'm not sure how to do that. Signed-off-by: Simon Glass <sjg@chromium.org>
2012-10-03Output strings from echo with puts where easyJoe Hershberger1-7/+21
Change echo to puts characters together where it knows about them together. This improves netconsole performance by greatly reducing the number of packets that are sent. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Add a command to access the system timerJoe Hershberger2-1/+29
Two sub-commands... start and get. * start sets the reference. * get prints out the time since the last start (in "<sec>.<msec>" format). If get is called without start, returns time since boot. Simple way to benchmark an operation: "timer start;<commands-to-measure>;timer get" Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Add a new "ini" commandJoe Hershberger3-0/+249
This allows you to read ini-formatted data from anywhere and then import one of the sections into the environment This is based on rev 16 at http://code.google.com/p/inih/ Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Cleanup cache command printsJoe Hershberger1-1/+1
Only print when queried, not every time the setting is changed. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Fix checkpatch.pl complaints in cmd_cache.cJoe Hershberger1-21/+26
Old code that is not compliant. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03net: fix netconsole filteringJoe Hershberger1-1/+1
Adjustment of Michael Walle's fix patch Commit 8a0eccb1056b313b45ab62e3aac400f339aa71b4 breaks netconsole. src_ip must not be converted to host byte order, because nc_ip is already stored in network byte order (see string_to_ip(), called by getenv_IPaddr()). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Add parameter to md5sum to save the md5 sumJoe Hershberger1-4/+37
Add a parameter that allows you to store the md5 sum to either a memory location or a variable. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Implement verify option for md5sum commandJoe Hershberger1-0/+105
Loosely based on CONFIG_CRC32_VERIFY. The sum to verify against can be in memory, in a variable, or the last parameter to the function directly. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Add parameter to sha1sum to save the SHA1 sumJoe Hershberger1-4/+37
Add a parameter that allows you to store the SHA1 sum to either a memory location or a variable. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Implement verify option for sha1sum commandJoe Hershberger1-0/+105
Loosely based on CONFIG_CRC32_VERIFY. The sum to verify against can be in memory, in a variable, or the last parameter to the function directly. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Change dead code in "test" cmd to debug outputJoe Hershberger1-3/+3
Improve debug output for test by indicating the number of parameters and quoting the parameters to make it clear exactly what each contains Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Allow runtime configuration of "zero-delay" checkJoe Hershberger2-2/+5
Define the new "-2" value for bootdelay to mean autoboot with no delay and don't check for an abort key (while "0" value means do check). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-10-03Merge remote-tracking branch 'u-boot-marvell/master'Albert ARIBAUD22-21/+862
2012-10-03lsxl: also turn off fan in power down modeMichael Walle1-1/+5
If while booting the power switch is in OFF position, turn off the fan, too. Signed-off-by: Michael Walle <michael@walle.cc> Cc: Prafulla Wadaskar <prafulla@marvell.com>
2012-10-03km_kirkwood: enable MV88E6352_SWITCH support for kmnusaValentin Longchamp1-0/+2
This is required to configure the external 88e6352 switch on nusa. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Holger Brunck <holger.brunck@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> Acked-by: Prafulla Wadaskar <Prafulla@marvell.com>
2012-10-03arm/km: add mv88e6352 configuration for kmnusaValentin Longchamp1-0/+65
The kmnusa board uses a mv88e6352 switch that is connected to the main eth interface of the kirkwood. Therefore the switch must be configured so that the kirkwood's egiga eth inferface can be used. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Cc: Holger Brunck <holger.brunck@keymile.com> Cc: Prafulla Wadaskar <prafulla@marvell.com> Acked-By: Prafulla Wadaskar <prafulla@marvell.com>
2012-10-03edminiv2: increase malloc len to 256KAlbert ARIBAUD1-1/+1
Malloc len of 128K caused a warning from ehci_hcd asking for more. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
2012-10-03ARM: kirkwood/orion5x: Use reset_cpu definition in include/common.hDinh Nguyen2-2/+0
include/common.h has the reset_cpu defined already. No need to re-define here. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: Pavel Machek <pavel@denx.de> Acked-By: Prafulla Wadaskar <Prafulla@marvell.com>
2012-10-03kirkwood: ib62x0: Invert SATA activity LEDsSimon Baatz2-0/+7
The hardware design of the IB-NAS62x0 causes the SATA activity LEDs to be on when idle by default. Reverse the polarity of the activity LEDs in early init. Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Cc: Luka Perkov <uboot@lukaperkov.net> Cc: Prafulla Wadaskar <prafulla@marvell.com> Acked-by: Luka Perkov <uboot@lukaperkov.net>
2012-10-03arm/km: use kw_sdram_size_adjust to adjust SDRAM sizeHolger Brunck1-1/+2
Some boards may differ only in the SDRAM size. This function allows to fix the size accordingly and we can use the same u-boot binary for both boards. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com>
2012-10-03kirkwood: implement kw_sdram_size_adjustGerlando Falauto2-0/+12
Size of the SDRAM chips might differ between any two (otherwise identical) instances of the same board. So add a function kw_sdram_size_adjust() which reads out the current ram size for a given bank, and adjusts the Kirkwood's SDRAM window size register accordingly. Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com>
2012-10-03kirkwood: implement kw_sdram_bs_set()Gerlando Falauto1-0/+24
Some boards might be equipped with different SDRAM configurations. When that is the case, CPU CS Window Size Register (CS[0]n Size) should be set to the biggest value through board.cfg file; then its value can be fixed at runtime according to the detected SDRAM size. Therefore, implement kw_sdram_bs_set(). Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Marek Vasut <marex@denx.de> Acked-by: Prafulla Wadaskar <Prafulla@marvell.com>
2012-10-03kirkwood: use c-struct for access to SDRAM addr decode registersHolger Brunck1-6/+17
Remove the defines and do this with a C-struct. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Gerlando Falauto <gerlando.falauto@keymile.com> cc: Marek Vasut <marex@denx.de> Acked-By: Prafulla Wadaskar <Prafulla@marvell.com>
generated by cgit v1.1 at 2024-10-07 06:39:54 +0000