aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-03-11Prepare v2024.04-rc4v2024.04-rc4Tom Rini2-2/+2
Signed-off-by: Tom Rini <trini@konsulko.com>
2024-03-11Merge tag 'u-boot-imx-master-20240311' of ↵WIP/11Mar2024Tom Rini9-15/+345
https://gitlab.denx.de/u-boot/custodians/u-boot-imx - Use TF-A on imx8mp_beacon to fix boot regression. - Use latest 6.8 dts for imx8mp_beacon. - Fix the RAM initialization for phycore_imx8mp PCL-070 rev 1. - Describe the 0087 i.mx8m mini product variant in tdx-cfg-block.
2024-03-11configs: Resync with savedefconfigTom Rini6-14/+14
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2024-03-11arm: dts: imx8mp-beacon-kit: Resync DTS with Linux 6.8Adam Ford3-6/+321
The device tree has evolved over time, so re-sync. This also partial reverts one change on the PCIe, because U-Boot doesn't have a proper driver. However, since the clock is configured to generate a 100MHz reference clock by default, a proper driver isn't really necessary. Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2024-03-11toradex: tdx-cfg-block: add 0087 i.mx8m mini product variantJoao Paulo Goncalves2-0/+2
Add new product id 0087 Verdin iMX8M Mini Quad 2GB IT. Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
2024-03-11configs: imx8mp_beacon: Fall back to using TF-AAdam Ford1-7/+0
When the board was originally added, it enabled some features which allowed it to bypass Trusted Firmware, but as the feature set of Linux grew and more features became available, the U-Boot config options which bypassed TF-A caused issues, so it needs to return to the standard operating mode of using TF-A or the system no longer boots. Fixes: ab53bd43dbde ("arm64: imx: Add support for imx8mp-beacon-kit") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2024-03-11board: phycore_imx8mp: Use 2GHz RAM timings for PCL-070 from pcb_rev 1Benjamin Hahn1-2/+4
We need to differ between PCL-070 and PCM-070. PCL-070 supports 2GHz RAM timings from pcb rev 1 or newer. PCM-070 supports 2GHz RAM timings from pcb rev 3 or newer. Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
2024-03-11board: phytec: common: phytec_som_detection: Add phytec_get_som_typeBenjamin Hahn2-0/+18
Add a function that gets the som_type from the EEPROM. Add an enum for the som_type. Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
2024-03-09Merge https://source.denx.de/u-boot/custodians/u-boot-usbTom Rini1-1/+1
- Singular quirk DT property rename.
2024-03-09net: phy: Use PHY MDIO address from DT if availableWIP/09Mar2024Marek Vasut1-0/+3
In case the PHY is fully described in DT, use PHY MDIO address from DT directly instead of always using auto-detection. This also fixes the behavior of 'mdio list' in such DT setup, which now prints the PHY connected to the MAC correctly. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
2024-03-05Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-marvellWIP/05Mar2024Tom Rini9-1/+202
- net: mv88e6xxx: fix missing SMI address initialization (Marek) - mvebu: turris_omnia: Enable networking via ethernet switch (Marek) - mvebu: helios-4: add config fragment for spi booting et al (Josua) - rng: Add Turris Mox rTWM RNG driver (Max)
2024-03-05Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxiTom Rini10-20/+100
One fix makes the reboot more robust on some older board, another one stabilises the initial clock setup on the A10/A20. Two patches make sure our DRAM init does not actually change the content of the DRAM array, which allows to use DRAM for Linux' pstore functionality. We get SPI support for U-Boot proper for one more SoC, that patch was lingering around for a while, and should not affect other SoCs, so I am merging this now. As an added bonus, we get the defconfig file for a new board, the DT was already synced from the kernel tree. The CI looked happy with changes, and I tested them on five different boards with different SoCs.
2024-03-05rng: Add Turris Mox rTWM RNG driverMax Resch3-0/+132
A RNG driver for Armada 3720 boards running the Turris Mox rWTM firmware from CZ.NIC in the secure processor. Signed-off-by: Max Resch <resch.max@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2024-03-05board: helios-4: add config fragment for spi bootingJosua Mayer1-0/+4
Add a config fragment with required differences for booting from spi flash instead of sd-card (default). Settings for environment location are based on vendor u-boot: https://github.com/kobol-io/u-boot/blob/helios4/include/configs/helios4.h#L59 The fragment can be applied on top of helios4_defconfig by make: make helios4_defconfig spiboot.config Signed-off-by: Josua Mayer <josua@solid-run.com>
2024-03-05arm: mvebu: helios4_defconfig: enable setexpr commandJosua Mayer1-1/+0
Update the helios4 defconfig to enable the 'setexpr' command, which is a default and useful for various complex boot-scripts. Signed-off-by: Josua Mayer <josua@solid-run.com>
2024-03-05arm: dts: armada-38x-solidrun-microsom: configure i2c0 busJosua Mayer1-0/+5
SolidRun Armada-388 SoM has an i2c bus supporting on-som eeprom, and peripherals on a carrier. armada-38x.dtsi disables this bus by default, it should be enabled by som or carrier dts. Linux has moved i2c0 from helios-4 board dts to som dtsi, including status, pinctrl and clock speed. Copy these settings from mainline. This fixes accessing i2c bus from u-boot commandline. Signed-off-by: Josua Mayer <josua@solid-run.com>
2024-03-05arm: mvebu: turris_omnia: Enable networking via ethernet switchMarek Mojík2-0/+53
The Turris Omnia contains the Marvell 88E6176 ethernet switch. Add config options and device tree to enable the support. Signed-off-by: Marek Mojík <marek.mojik@nic.cz> Signed-off-by: Marek Behún <kabel@kernel.org>
2024-03-05net: mv88e6xxx: fix missing SMI address initializationMarek Mojík1-0/+8
The mv88e6xxx driver does not currently initialize the smi_addr field, but instead keeps the default zero value. This leads to driver being unusable on devices where the switch is not on address zero of the mdio bus. Fix this problem by reading the SMI address from device tree. Signed-off-by: Marek Mojík <marek.mojik@nic.cz> Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2024-03-05sunxi: restore modified memoryAndrey Skvortsov1-2/+14
Current sunxi DRAM initialisation code does several test accesses to the DRAM array to detect aliasing effects and so determine the correct row/column configuration. This changes the DRAM content, which breaks use cases like soft reset and Linux's ramoops mechanism. Fix this problem by saving and restoring the content of the DRAM cells that is used for the test writes. Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2024-03-05sunxi: reorganize mctl_mem_matches_* functionsAndrey Skvortsov3-19/+15
mctl_mem_matches and mctl_mem_matches_base identical functions. To avoid code duplication move them to dram_helpers and make mctl_mem_matches use generic mctl_mem_matches_base. Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2024-03-05usb: xhci-dwc3: Fix support for dis_enblslpm_quirkJonas Karlman1-1/+1
No device tree in U-Boot or linux use the wrong spelling used in code. Use correct property name as defined in dwc3 bindings. Fixes: 062790f46131 ("usb: xhci-dwc3: Add USB2 PHY configuration") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Marek Vasut <marex@denx.de>
2024-03-04Merge tag 'u-boot-imx-master-20240304' of ↵WIP/04Mar2024Tom Rini13-25/+59
https://gitlab.denx.de/u-boot/custodians/u-boot-imx CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/19817 - Fix i.MX93 OP-TEE support. - Use the container image for i.MX93 revision A1. - Fix display regression on opos6uldev.
2024-03-04video: mxsfb: add back imx6ul/imx6ull supportSébastien Szymanski1-0/+1
Because of commit bf947d2a4b15 ("imx6ul: synchronise device tree with linux"), the compatible property of lcdif in imx6ul.dtsi went from compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif"; to compatible = "fsl,imx6ul-lcdif", "fsl,imx6sx-lcdif"; without updating the mxsfb driver to match that change. Add "fsl,imx6sx-lcdif" as a compatible id to fix that. Fixes: bf947d2a4b15 ("imx6ul: synchronise device tree with linux") Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2024-03-04opos6uldev: make the LCD work againSébastien Szymanski3-10/+22
Commit 5d7a95f49999 ("imx6ul/imx6ull: synchronise device trees with linux") removed the display timings from the board device tree whereas they are still needed by the mxsfb driver. Add the timings back (the correct ones) in the imx6ul-opos6uldev-u-boot.dtsi file and remove them from the opos6uldev.env file. Update the opos6uldev_defconfig file so that the LCD turns on at boot. Fixes: 5d7a95f49999 ("imx6ul/imx6ull: synchronise device trees with linux") Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
2024-03-04imx9: Update to mx93 A1 chip revision.Mathieu Othacehe4-13/+13
Use the latest, mx93a1-ahab-container.img that is compatible with the i.MX93 A1 revision. Using mx93a1-ahab-container.img on an A0 chip and conversely causes a boot failure without any traces on the UART. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
2024-03-04tools: imx9_image: Reword warning message.Mathieu Othacehe1-1/+1
If the optional `tee.bin` OP-TEE binary is missing, the image will still be functional. Adapt the warning message accordingly. Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
2024-03-04imx9: Fix OP-TEE supportMathieu Othacehe4-1/+22
This fixes OP-TEE support by: - Adding tee.bin to container.cfg - Starting ELE RNG in SPL Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
2024-03-03sunxi: H616: Add OrangePi Zero 2W board supportAndre Przywara3-0/+36
The OrangePi Zero 2W is a tiny development board featuring the Allwinner H618 SoC, shipping with up to 4GB of LPDDR4 DRAM, a mini-HDMI connector, two USB Type-C sockets and a 16MB SPI NOR flash. There is an FPC connector to connect an expansion board, which sports two more USB Type-A sockets and a 100MBit Ethernet port. Support for the expansion board is not in the DT yet, probably a DT overlay would cover this in the future. Add a defconfig file selecting the right drivers and DRAM options. Since the .dts file was synced from the Linux kernel repo already, we just need to add one line to the Makefile to actually build the .dtb. The DRAM parameters were derived from the values found in the BSP DRAM drivers on the SPI NOR flash. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2024-03-03sunxi: sun4i: add missing sdelay() to clock_init_safe()Ludwig Kormann1-0/+2
This delay is required after switching the clock source. See “A20 Reference manual v1.4” Page 50 / section “1.5.4.16. CPU/AHB/APB0 CLOCK RATIO”: “If the clock source is changed, at most to wait for 8 present running clock cycles.” This is already implemented in clock_set_pll1(), but was still missing in clock_init_safe(). Signed-off-by: Ludwig Kormann <ludwig.kormann@ict42.de> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2024-03-03arm: sunxi: Reduce inrush current on Olimex A20-OLinuXino_MICRO configsPhilippe Coval2-0/+2
This change fix reboot, both configurations were tested on my Olimex A20 Micro Rev E with debian-12. This issue was also present and fixed on A20 Lime2 (in 8311e84b18), quoting Olliver Schinagl: The lime2 features a too large capacitor on the LDO3 output, which causes the PMIC to shutdown when enabling power. To be able to still boot up however, we must gradually enable power on LDO3 for this board. We do this by enabling both the inrush quirk and the maximum slope the AXP209 supports. Link: https://bugs.debian.org/1060752 Cc: Olliver Schinagl <oliver@schinagl.nl> Cc: Priit Laes <plaes@plaes.org> Cc: Maxime Ripard <mripard@kernel.org> Signed-off-by: Philippe Coval <rzr@users.sf.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2024-03-03spi: sunxi: Add support for R329/D1/R528/T113 SPI controllerMaksim Kiselev1-1/+33
These SoCs have two SPI controllers that are quite similar to the SPI on previous Allwinner SoCs. The main difference is that new SoCs don't have a clock divider (SPI_CCR register) inside SPI IP. Instead SPI sample mode should be configured depending on the input clock. For now SPI input clock source selection is not supported by this driver, and only HOSC@24MHz can be used as input clock. Therefore, according to the, manual we could change the SPI sample mode from delay half cycle(default) to normal. This patch adds a quirk for this kind of SPI controllers Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com> Tested-by: Sam Edwards <CFSworks@gmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2024-03-02Merge patch series "ARM: renesas: Rename R-Mobile to Renesas"WIP/02Mar2024Tom Rini147-4355/+439
Marek Vasut <marek.vasut+renesas@mailbox.org> says: Rename R-Mobile to Renesas all over the place because the chips are made by Renesas, while only a subset of them is from the R-Mobile line.
2024-03-02git-mailrc: Add renesas entry and update rmobile entryMarek Vasut1-1/+2
Add new renesas entry and update rmobile entry to match. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
2024-03-02mmc: renesas-sdhi: Rename rmobile_is_gen3_mmc0() to rcar_is_gen3_mmc0()Marek Vasut1-4/+4
Rename rmobile_is_gen3_mmc0() to rcar_is_gen3_mmc0() because this particular function is specific to Renesas R-Car Gen3. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
2024-03-02ARM: renesas: Post rename fix upsMarek Vasut3-3/+3
Fix up remains of rename from rmobile to renesas, namely file paths and remaining RMOBILE strings. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
2024-03-02ARM: renesas: Rename arch-/mach-rmobile to arch-/mach-renesasMarek Vasut55-37/+37
Rename arch-rmobile to arch-renesas and mach-rmobile to mach-renesas because all the chips are made by Renesas, while only a subset of them is from the R-Mobile line. Use the following command to perform the rename, with manual move of the directories using git mv and manual fix up to arch/arm/Makefile: " $ git grep -l '\<\(arch\|mach\)-rmobile\>' | \ xargs -I {} sed -i 's@\<\(arch\|mach\)-rmobile\>@\1-renesas@g' {} $ sed -i 's@rmobile@renesas@' board/*/*/Kconfig " Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
2024-03-02ARM: renesas: Rename ARCH_RMOBILE to ARCH_RENESASMarek Vasut41-49/+49
Rename ARCH_RMOBILE to ARCH_RENESAS because all the chips are made by Renesas, while only a subset of them is from the R-Mobile line. Use the following command to perform the rename: " $ git grep -l 'ARCH_RMOBILE' | xargs -I {} sed -i 's@ARCH_RMOBILE@ARCH_RENESAS@g' {} " Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
2024-03-02ARM: renesas: Rename rmobile.h to renesas.hMarek Vasut40-39/+39
Rename rmobile.h to renesas.h because all the chips are made by Renesas, while only a subset of them is from the R-Mobile line. Use the following command to perform the rename: " $ git grep -l 'include.*rmobile.h' | \ xargs -I {} sed -i '/include.*rmobile.h/ s@rmobile.h@renesas.h@g' {} " Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
2024-03-02ARM: renesas: Rename CONFIG_ARCH_RMOBILE_EXTRAM_BOOT to ↵Marek Vasut9-25/+25
CONFIG_RENESAS_EXTRAM_BOOT Rename CONFIG_ARCH_RMOBILE_EXTRAM_BOOT to CONFIG_RMOBILE_EXTRAM_BOOT because the former symbol does not exist and it is only incorrectly converted CONFIG_RMOBILE_EXTRAM_BOOT which does exist. Replace the RMOBILE with RENESAS because all the chips are made by Renesas, while only a subset of them is from the R-Mobile line. Use the following command to perform the rename with manual Kconfig.32 fix: " $ sed -i 's@CONFIG_ARCH_RMOBILE_EXTRAM_BOOT@CONFIG_RMOBILE_EXTRAM_BOOT@g' board/renesas/*/* $ sed -i 's@CONFIG_RMOBILE_EXTRAM_BOOT@CONFIG_RENESAS_EXTRAM_BOOT@g' board/renesas/*/* " Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
2024-03-02ARM: renesas: Rename ARCH_RMOBILE_BOARD_STRING to ARCH_RENESAS_BOARD_STRINGMarek Vasut10-11/+11
Rename ARCH_RMOBILE_BOARD_STRING to ARCH_RENESAS_BOARD_STRING because all the chips are made by Renesas, while only a subset of them is from the R-Mobile line. Use the following command to perform the rename: " $ git grep -l 'ARCH_RMOBILE_BOARD_STRING' | \ xargs -I {} sed -i 's@ARCH_RMOBILE_BOARD_STRING@ARCH_RENESAS_BOARD_STRING@g' {} " Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
2024-03-02ARM: renesas: Rename rmobile_get_prr() to renesas_get_prr()Marek Vasut1-4/+4
Rename rmobile_get_prr() to renesas_get_prr() because all the chips are made by Renesas, while only a subset of them is from the R-Mobile line. Use the following command to perform the rename: " $ git grep -l '\<rmobile_get_prr\>' | \ xargs -I {} sed -i 's@\<rmobile_get_prr\>@renesas_get_prr@g' {} " Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
2024-03-02ARM: renesas: Simplify weak symbolsMarek Vasut1-9/+3
Simplify the weak symbols use in cpu_info.c by using the __weak macro. The result is identical, but the syntax is much simpler. Furthermore, drop three more rmobile* symbols which are now unused. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
2024-03-02ARM: renesas: Rename rmobile_cpuinfo[] to renesas_cpuinfo[]Marek Vasut1-6/+6
Rename rmobile_cpuinfo[] to renesas_cpuinfo[] because all the chips are made by Renesas, while only a subset of them is from the R-Mobile line. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
2024-03-02ARM: renesas: Rename rmobile_cpuinfo_idx() to renesas_cpuinfo_idx()Marek Vasut1-3/+3
Rename rmobile_cpuinfo_idx() to renesas_cpuinfo_idx() because all the chips are made by Renesas, while only a subset of them is from the R-Mobile line. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
2024-03-02ARM: renesas: Rename RMOBILE_CPU_TYPE_* to RENESAS_CPU_TYPE_*Marek Vasut8-65/+65
Rename RMOBILE_CPU_TYPE_* to RENESAS_CPU_TYPE_* because all the chips are made by Renesas, while only a subset of them is from the R-Mobile line. Use the following command to perform the rename: " $ git grep -l '\<RMOBILE_CPU_TYPE_[A-Z0-9]\+\>' | \ xargs -I {} sed -i 's@\<RMOBILE\(_CPU_TYPE_[A-Z0-9]\+\)\>@RENESAS\1@g' {} " Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
2024-03-02ARM: renesas: Rename rmobile_get_cpu_rev_*() to renesas_get_cpu_rev_*()Marek Vasut16-41/+41
Rename rmobile_get_cpu_rev_*() to renesas_get_cpu_rev_*() because all the chips are made by Renesas, while only a subset of them is from the R-Mobile line. Use the following command to perform the rename: " $ git grep -l '\<rmobile_get_cpu_rev_\(integer\|fraction\)\>' | \ xargs -I {} sed -i 's@\<rmobile_get_cpu_rev_\(integer\|fraction\)\>@renesas_get_cpu_rev_\1@g' {} " Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
2024-03-02ARM: renesas: Rename rmobile_get_cpu_type() to renesas_get_cpu_type()Marek Vasut10-28/+28
Rename rmobile_get_cpu_type() to renesas_get_cpu_type() because all the chips are made by Renesas, while only a subset of them is from the R-Mobile line. Use the following command to perform the rename: " $ git grep -l '\<rmobile_get_cpu_type\>' | \ xargs -I {} sed -i 's@\<rmobile_get_cpu_type\>@renesas_get_cpu_type@g' {} " Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
2024-03-02ARM: renesas: Drop unused pfc-r8a7790.hMarek Vasut1-139/+0
This file is no longer used, the PFC pin controller driver is superseded by drivers/pinctrl/renesas/pfc-r8a7790.c which includes all the details of the hardware. Remove this file. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
2024-03-02ARM: renesas: Drop unused mmc.hMarek Vasut6-18/+0
This file is no longer used, the MMCIF controller driver is superseded by drivers/mmc/sh_mmcif.c which includes all the details of the hardware. Remove this file include from all board files and remove the file itself. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
2024-03-02ARM: renesas: Drop unused sh_sdhi.hMarek Vasut12-181/+0
This file is no longer used, the SDHI controller driver is long superseded by drivers/mmc/renesas-sdhi.c which includes all the details of the hardware. Remove this file include from all board files and remove the file itself. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
generated by cgit v1.1 at 2024-11-05 16:38:10 +0000