aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-09-22binman: Use pkg_resources to find resourcesSimon Glass1-2/+4
At present we look for resources based on the path of the Python module that wants them. Instead we should use Python's pkg_resources feature which is designed for this purpose. Update binman to use this. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-09-22binman: Build FIT image subentries with the section etypeAlper Nebi Yasak4-17/+169
When reading subentries of each image, the FIT entry type directly concatenates their contents without padding them according to their offset, size, align, align-size, align-end, pad-before, pad-after properties. This patch makes sure these properties are respected by offloading this image-data building to the section etype, where each subnode of the "images" node is processed as a section. Alignments and offsets are respective to the beginning of each image. For example, the following fragment can end up having "u-boot-spl" start at 0x88 within the final FIT binary, while "u-boot" would then end up starting at e.g. 0x20088. fit { description = "example"; images { kernel-1 { description = "U-Boot with SPL"; type = "kernel"; arch = "arm64"; os = "linux"; compression = "none"; u-boot-spl { }; u-boot { align = <0x10000>; }; }; }; } Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reinstate check in testPadInSections(), squash in "binman: Allow FIT binaries to have missing external blobs" Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2020-09-22binman: Respect pad-before property of section subentriesAlper Nebi Yasak3-1/+35
Other relevant properties (pad-after, offset, size, align, align-size, align-end) already work since Pack() sets correct ranges for subentries' data (.offset, .size variables), but some padding here is necessary to align the data within this range to match the pad-before property. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-22binman: Ignore hash*, signature* nodes in sectionsAlper Nebi Yasak3-1/+47
Switch to str.startswith for matching like the FIT etype does since the current version doesn't ignore 'hash-1', 'hash-2', etc. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-21Merge branch '2020-09-14-generic-phy-error-trace' into nextTom Rini7-24/+59
- Add error tracing messages to the generic PHY infrastructure
2020-09-21Merge branch 'master' into nextTom Rini89-187/+529
Merge in v2020.10-rc5
2020-09-21Prepare v2020.10-rc5v2020.10-rc5Tom Rini1-1/+1
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-09-21configs: Resync with savedefconfigTom Rini4-6/+6
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-09-21Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini8-16/+19
- Several ACPI bug fixes - Intel edison: Move config SYS_MALLOC_LEN to Kconfig - Use "emmc" in ApolloLake FSP devicetree bindings
2020-09-21x86: acpi: Add memset to initialize SPCR tableWolfgang Wallner1-0/+2
Add a missing memset to acpi_create_spcr(). The other acpi_create_xxxx() functions perform a memset on their structures, acpi_create_spcr() does not and as a result the contents of this table are partly uninitialized (and thus random after every reset). Fixes: b288cd960072 ("x86: acpi: Generate SPCR table") Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: fix the tags format in the commit message] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-21x86: acpi: Fix calculation of DSDT lengthWolfgang Wallner1-1/+3
Currently, the calculation for the length of the DSDT table includes any bytes that are added for alignment, but those bytes are not initialized. This is because the DSDT length is calculated after a call to acpi_inc_align(). Split this up into the following sequence: * acpi_inc() * Calculate DSDT length * acpi_align() Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-21x86: fsp: Replace e-mmc with emmc in devicetree bindingsWolfgang Wallner3-5/+5
The term eMMC is used inconsistently within the FSP devicetree bindings (e-mmc and emmc), especially for "emmc-host-max-speed" documentation and code disagree. Change all eMMC instances within the FSP bindings to consistently use "emmc". The term "emmc" is already used a lot within U-Boot, while "e-mmc" is only used in the FSP bindings. Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: correct one typo in the commit message] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-21cmd: acpi: Print revisions in hex formatAndy Shevchenko2-6/+6
The revisions are usually dates in hex-decimal format representing YYYYmmdd. Print them in hex to see this clearly. Before: ... FACP 000e5420 0000f4 (v06 U-BOOT U-BOOTBL 538970376 INTL 0) DSDT 000e4780 000ba0 (v02 U-BOOT U-BOOTBL 65536 INTL 538968870) ... After: ... FACP 000e5420 0000f4 (v06 U-BOOT U-BOOTBL 20200908 INTL 0) DSDT 000e4780 000ba0 (v02 U-BOOT U-BOOTBL 10000 INTL 20200326) ... Fixes: 0b885bcfd9b0 ("acpi: Add an acpi command") Cc: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-21x86: edison: Move config SYS_MALLOC_LEN to KconfigAndy Shevchenko2-4/+3
This patch moves the the config SYS_MALLOC_LEN to Kconfig as it is already done for zynq arch in commit 01aa5b8f0503 ("Kconfig: Move config SYS_MALLOC_LEN to Kconfig for zynq"). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-19Merge tag 'efi-2020-10-rc5-2' of ↵Tom Rini4-18/+60
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-10-rc5 (2) The following bugs are fixed: * incorrect online help for setenv and env * description of function efi_mem_carve_out() * replace printf() by log_err() in stm32mp1_rng driver A unit test is provided to check that the boot hart id is provided in the RISC-V device-tree.
2020-09-19Merge branch '2020-09-18-assorted-bugfixes'Tom Rini7-15/+48
- SquashFS Coverity fixes - bitflip fix in the alternate memtest command - Disable networking on bcmstb boards where we didn't have any network drivers enabled.
2020-09-19Merge branch '2020-09-18-improve-ipq40xx-support' into nextTom Rini13-3/+529
- Assorted improvements to the Qualcomm IPQ40XX SoC
2020-09-18efi: change 'env -e -i' usage syntaxMaxim Uvarov1-2/+2
'env -e -i' syntax was changed from "," to ":". Account for this also in the documentation. Fixes: 2b3fbcb59f41 ("efi_loader: use ':' as separator for setenv -i") Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Correct the usage description for setenv -e too. Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-18efi_selftest: check for RISC-V boot-hartid in FDTHeinrich Schuchardt1-0/+15
On RISC-V check that the /chosen node has a boot-hartid property. To run the test configure with CONFIG_CMD_BOOTEFI_SELFTEST=y and issue setenv efi_selftest device tree setenv serial# myserial bootefi selftest If the test succeeds, it reports the boot-hartid, e.g. boot-hartid: 1 Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-18efi_selftest: rework device tree testHeinrich Schuchardt1-14/+39
Allow specifying the node on which a property is searched. Test the device tree consistency more rigorously. Some efi_st_printf() calls have been converted to efi_st_error(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-18efi_memory: refine overlap_only_ram descriptionMaxim Uvarov1-1/+1
Refine text for overlap_only_ram description to match to what exactly flag does and aling description with other functions. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-18rng: stm32mp1: use log() instead of printf()Heinrich Schuchardt1-1/+3
The logging system provides flexible filtering and enhanced output. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Sughosh Ganu <sughosh.ganu@linaro.org>
2020-09-18IPQ40xx: Add USB nodesRobert Marko1-0/+76
There are drivers to support built in USB controller and PHY-s now, so lets add the USB nodes to DTSI. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-09-18usb: dwc3: Add Qualcomm DWC3 compatible stringRobert Marko1-0/+1
Lot of Qualcomm SoC-s use DWC3 controller for both USB2.0 and USB3.0 ports. Qualcomm has some custom config registers on top of the generic ones, but for host mode these are not needed. So lets add the neccessary compatible string. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-09-18phy: add driver for Qualcomm IPQ40xx USB PHYRobert Marko4-0/+153
Add a driver to setup the USB PHY-s on Qualcomm IPQ40xx series SoCs. The driver sets up HS and SS phys. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-09-18IPQ40xx: Add reset controller supportRobert Marko2-0/+10
Since we have a driver for the reset controller, lets add the necessary node. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-09-18reset: Add IPQ40xx reset controller driverRobert Marko5-0/+276
On Qualcomm IPQ40xx SoC series, GCC clock IP also handles the resets. So since this will be needed by further drivers, lets add a driver for the reset controller. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-09-18IPQ40xx: Add SMEM supportRobert Marko3-1/+8
There is already existing driver for SMEM so lets enable it for IPQ40xx as well. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-09-18IPQ40xx: clk: Use dt-bindings instead of hardcodingRobert Marko2-2/+5
Its common to use dt-bindings instead of hard-coding clocks or resets. So lets use the imported Linux GCC bindings on IPQ40xx target. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr>
2020-09-18cmd: mem: fix range of bitflip testRalph Siemsen2-5/+28
The bitflip test uses two equal sized memory buffers. This is achieved by splitting the range of memory into two pieces. The address of the second buffer, as well as the length of each buffer, were not correctly calculated. This caused bitflip test to access beyond the end of range. This patch fixes the pointer arithmetic problem. A second problem arises because u-boot "mtest" command expects the ending address to be inclusive. When computing (end - start) this results in missing 1 byte of the requested length. The bitflip test expects a count rather than an "ending" address. Thus it fails to test the last word of the requested range. Fixed by using (end - start + 1). Added Kconfig option to optionally disable the bitflip test, since it does add significantly to the time taken for "mtest". Fixes: 8e434cb705d463bc8cff935160e4fb4c77cb99ab ("cmd: mem: Add bitflip memory test to alternate mtest") Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org> Reviewed-by: Stefan Roese <sr@denx.de>
2020-09-18configs: bcmstb: Disable networking supportThomas Fitzsimmons2-0/+2
Silence the "Driver Model for Ethernet drivers" migration warning for the bcm7445 and bcm7260 ports, neither of which supports networking yet. Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-09-18fs/squashfs: Fix Coverity Scan defectsJoao Marcos Costa3-10/+18
Fix control flow issues and null pointer dereferences. Signed-off-by: Joao Marcos Costa <jmcosta944@gmail.com>
2020-09-18Merge tag 'u-boot-imx-20200918' of ↵Tom Rini33-74/+67
https://gitlab.denx.de/u-boot/custodians/u-boot-imx ---------------------------------------------------------------- Fixes for 2020.10 ----------------- - Toradex boards - mx6qsabrelite: fix env offset - esdhc_imx: waiting for clock instead of sleep - dyn RAM calibration for entry point i.MX6 Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/728274602
2020-09-18board: tbs2910: Disable CONFIG_ENV_VARS_UBOOT_CONFIG in defconfigSoeren Moch1-1/+0
This is not required for sysboot (we defined fdtfile), let's save a few bytes in the binary image without these variables. Signed-off-by: Soeren Moch <smoch@web.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-09-17Merge tag 'for-v2021.01-next' of ↵Tom Rini58-1145/+6827
https://gitlab.denx.de/u-boot/custodians/u-boot-i2c into next mpc83xx, keymile boards: enable DM_ETH and add DTS - mpc83xx: remove unneeded extern declaration in cpu_init - powerpc, qe: fix codingstyle issues for drivers/qe - powerpc, qe: add DTS support for parallel I/O ports - net, qe: add DM support for QE UEC ethernet - add DTS for all mpc83xx based boards from keymile mainly they are not mainlined to linux. - add u-boot specific dtsi - add stdout-path - add missing ucc4 par_io definitions, which were in board code, but not in linux DTS - remove not used ethernet nodes
2020-09-17Merge branch '2020-09-16-assorted-fixes'Tom Rini4-4/+16
- Assorted bug fixes
2020-09-17apalis-imx8qm: rename all occurences to apalis-imx8Philippe Schenker5-6/+6
The Toradex product is called apalis-imx8 consisting of SoM with i.MX8QM and i.MX8QP SoCs. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17colibri-imx8qxp: rename all occurences to colibri-imx8xPhilippe Schenker5-6/+6
The Toradex product is called colibri-imx8x consisting of SoM with i.MX8QXP and i.MX8DX SoCs. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17mmc: fsl_esdhc_imx: check the clock stable status after config the clock rate.Haibo Chen1-1/+6
Currently, after config the clock rate, delay 10ms, this is quite a rough method. Check the clock stable status in the present status register is enough. Tested-by: Ji Luo <ji.luo@nxp.com> Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
2020-09-17ARM: mx6: ddr: Add support for iMX6UL/ULL/SL/SDLMarek Vasut1-0/+15
This patch adds support for iMX6UL/ULL/SL/SDL MMDC into the DDR calibration code. The difference between MX6DQ and MX6UL/ULL/SL is that the later SoCs have 2 SDQS registers, just like MX6SX, while the MX6DQ/MX6SDL has 8. Fixes: 4f4c128c65 ("ARM: mx6: ddr: Add support for iMX6SX") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eric Nelson <eric@nelint.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-09-17mx6qsabrelite: increase the environment offsetDenis Pynkin1-1/+1
The size of the binary created with the default U-boot config is much greater than the default offset for environment `0x60000`. In case if that binary is used for booting via MMC it is overlapped with the environment stored on MMC. This leads to U-Boot corruption while saving environment with `saveenv` command and non-bootable SabreLite board. The offset for environment `CONFIG_ENV_OFFSET=0x60000` was added in commit a09fea1 but did not count in the change to `0xC0000` if option `CONFIG_ENV_IS_IN_MMC` is used. The offset is also used for variant with environment saving onto SPI NOR flash (with enabled option `CONFIG_ENV_IS_IN_SPI_FLASH`). In that case the U-Boot binary flashed on SPI NOR is also corrupted after environment saving with the original 0x60000 offset. Signed-off-by: Denis Pynkin <denis.pynkin@collabora.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-09-17imx8mp: Remove parts MIMX8ML7 and MIMX8ML5 supportPeng Fan4-18/+5
Latest datasheet revE has removed MIMX8ML7D/5D/7C/5C parts, so update u-boot to remove decoding and support for those parts. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-09-17imx8m: clock_imx8mm: add missed returnPeng Fan1-0/+1
Add missed return Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-09-17imx8mq: fix SSCG_PLL_REFCLK_SEL_xPeng Fan1-4/+4
Fix SSCG_PLL_REFCLK_SEL_x, the offset starts from 0, not 16 Reported-by: Coverity 3448860 Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com>
2020-09-17imx8mq: fix FRAC_PLL_REFCLK_SEL_MASKPeng Fan1-1/+1
Coverity reported dead code, however it is FRAC_PLL_REFCLK_SEL_MASK was wrongly set. Reported-by: Coverity 10045172 Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com>
2020-09-17imx7: ccm: correct target interface numPeng Fan1-1/+1
According to i.MX 7Dual Applications Processor Reference Manual, Rev. 1 The target interface CCM root index ranges [0,124], so the number should be 125. Reported-by: Coverity 18045 Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com>
2020-09-17apalis_imx6: provide fdtfile in env instead of setting it in runtimeIgor Opaniuk1-1/+2
Provide fdtfile value in default env instead of setting it dynamically in runtime. Fixes: 85cb2bc686("apalis/colibri imx6: provide proper fdtfile value") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17colibri_imx6: provide fdtfile in env instead of setting it in runtimeIgor Opaniuk1-1/+2
Provide fdtfile value in default env instead of setting it dynamically in runtime. Fixes: 85cb2bc686("apalis/colibri imx6: provide proper fdtfile value") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17colibri_imx7: use preboot for fdtfile evaluationIgor Opaniuk3-3/+5
Enable and set preboot var with fdtfile evaluation. preboot will be checked and run immediately before starting the CONFIG_BOOTDELAY countdown and/or running the auto-boot command resp. entering interactive mode. This provides possibility to use different boot cmds in interactive mode without manual setting fdtfile value, as it it's already evaluated before entering interactive mode. Fixes: a62c60610f("colibri_imx7_emmc: add Colibri iMX7D 1GB (eMMC) module support") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17colibri_vf: use preboot for fdtfile evaluationIgor Opaniuk2-2/+3
Enable and set preboot var with fdtfile evaluation. preboot will be checked and run immediately before starting the CONFIG_BOOTDELAY countdown and/or running the auto-boot command resp. entering interactive mode. This provides possibility to use different boot cmds in interactive mode without manual setting fdtfile value, as it it's already evaluated before entering interactive mode. Fixes: 304042c1f3("colibri_vf: set fdtfile for distroboot") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
generated by cgit v1.1 at 2024-08-13 04:37:29 +0000