aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-07-21Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscvWIP/21Jul2021Tom Rini8-1569/+81
2021-07-21board: sifive: unmatched: reset USB hub, PCIe-USB bridge, and ULPI device in SPLVincent Chen1-0/+36
Ensure USB hub, PCIe-USB bridge, and ULPI device to be reset even if the rebooting is without power-cycling. Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-07-21board: sifive: unmatched: refine GEMGXL initialized function in SPLVincent Chen1-19/+39
Create a new function spl_reset_device_by_gpio to reset the device whose reset pin is connected to the GPIO. Then, using this function to initialize GEMGXL. Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-07-21board: sifive: drop stuff related to unmatched revision 1Zong Li6-1531/+3
This patch reverts the following commits: - 4b4159d0f3 ("riscv: dts: add dts for unmatched rev1") - ffe9a394df ("board: sifive: support spl multi-dtb on unmatched board") We won't plan to support unmatched that the revision below 3 in u-boot, so they can be dropped because they might be useless. Changed in v2: - rebase codebase to the latest master branch Signed-off-by: Zong Li <zong.li@sifive.com> Suggested-by: David Abdurachmanov <david.abdurachmanov@sifive.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-07-21riscv: booti: do not force relocation if force_reloc is not setVitaly Wool1-1/+6
If force_reloc flag is not set and booti is called for an address ouside RAM (i. e. QSPI NOR flash), we should honor that and not try to force relocation in a bogus fashion. Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-07-21board: sifive: remove the command for setting serial numberZong Li1-22/+1
We wouldn't like to allow user to change the serial number, so remove the command for changing serial number in EEPROM. Signed-off-by: Zong Li <zong.li@sifive.com> Suggested-by: David Abdurachmanov <david.abdurachmanov@sifive.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-07-20Merge branch 'master' of git://source.denx.de/u-boot-shTom Rini18-9/+378
- R-Car3 updates
2021-07-20ARM: dts: rmobile: Remove multiple unused DT properties on R-Car Gen3Marek Vasut6-0/+12
Filter out dmas dma-names interrupt-parent interrupts interrupts-extended interrupt-names interrupt-map interrupt-map-mask iommus DT properties on R-Car Gen3, since they are not used by U-Boot and only take space. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-07-20ARM: dts: rmobile: Disable RPC HF by defaultMarek Vasut8-8/+8
The RPC HF might be locked by ATF, and any access to its register space would result in complete hang. Disable the RPC HF by default. The ATF should be patched to set RPC node status = "okay" in the DT fragment it passes to U-Boot in case the RPC HF access is unlocked, and that way U-Boot could access the RPC HF safely. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-07-20ARM: rmobile: Align CPU: print with other printsMarek Vasut1-1/+1
The CPU: print only has one space after it, while the other prints from U-Boot align the value to offset 7. Align the CPU: print too. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-07-20ARM: rmobile: Enable sysinfo on R-Car Gen3Marek Vasut3-0/+3
Enable support for sysinfo on supported R-Car Gen3 boards. The sysinfo is used e.g. to access and decode board-specific information and then in turn used by board-info to print those information. On R-Car Gen3 the sysinfo rcar3 driver is used to parse the board ID EEPROM, obtain board type and revision from it, and let board-info print this information on boot. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-07-20ARM: rmobile: Enable I2C EEPROM support on R-Car Gen3Marek Vasut3-0/+21
Enable support for I2C EEPROM driver on supported Renesas R-Car Gen3 boards. This is useful for accessing the board ID EEPROM. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-07-20ARM: dts: rmobile: Add sysinfo extras on R-Car Gen3Marek Vasut7-0/+128
Add sysinfo node and phandle to the board ID EEPROM on all boards where this functionality is described in DT, which is Salvator-X(S), ULCB and Ebisu. The u-boot,dm-pre-reloc is necessary here, since the sysinfo must be available early during boot. The V3M and V3H boards currently do not describe this board ID EEPROM in upstream DT, but that could be easily added later, once the DTs contain the necessary nodes. ULCB and Ebisu needs the full EEPROM node in the u-boot extras DT, since the EEPROM node is still missing in the upstream DTs. Ebisu also needs extra compatible string override for the i2c_dvfs. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2021-07-20sysinfo: rcar3: Add Renesas R-Car Gen3 sysinfo driverMarek Vasut3-0/+205
The Renesas R-Car Gen3 development kits contain board ID EEPROM. This driver parses out the board ID and revision out of that EEPROM and exports it e.g. for the board-info print on boot. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Sean Anderson <sean.anderson@seco.com> Cc: Simon Glass <sjg@chromium.org>
2021-07-19Merge https://source.denx.de/u-boot/custodians/u-boot-marvellWIP/19Jul2021Tom Rini14-37/+548
- Marvell SheevaPlug: Convert Ethernet and SATA to Driver Model (Tony) - Zyxel NSA310S NAS: Convert to Driver Model (Tony) - Turris_omnia: Add `u-boot-env` NOR partition (Marek) - Turris_omnia: Fixup MTD partitions in Linux' DTB (Marek) - Espressobin: Enable 'mtd' command and define SPI NOR partitions (Pali)
2021-07-19Merge tag 'ti-v2021.10-rc1' of ↵Tom Rini67-609/+2466
https://source.denx.de/u-boot/custodians/u-boot-ti - Enabled distro boot for all TI platforms. - Cleanup for AM335x Guardian Board - PRUSS rproc on AM65 platform. - Add PMIC support for J7200 - Misc fixes for Nokia RX-51 # Conflicts: # arch/arm/mach-omap2/am33xx/Kconfig
2021-07-19arm: mvebu: Espressobin: Enable 'mtd' command and define SPI NOR partitionsPali Rohár3-5/+21
U-Boot now supports parsing SPI NOR partitions from Device Tree. So enable 'mtd' command support for Espressobin board and define partition layout in U-Boot Espressobin DTS file. Access to SPI NOR via 'sf' command is old method and 'mtd' command is now preferred variant. From include file remove '#define CONFIG_MTD_PARTITIONS' as this option is now defined and enabled in defconfig file. This change is required to fix compile error: CC arch/arm/lib/asm-offsets.s In file included from include/config.h:4, from include/common.h:16, from lib/asm-offsets.c:14: include/configs/mvebu_armada-37xx.h:63: warning: "CONFIG_MTD_PARTITIONS" redefined #define CONFIG_MTD_PARTITIONS /* required for UBI partition support */ In file included from ././include/linux/kconfig.h:4, from <command-line>: include/generated/autoconf.h:44: note: this is the location of the previous definition #define CONFIG_MTD_PARTITIONS 1 After enabling support for mtd command, output from 'mtd list' on Espressobin board is: => mtd list List of MTD devices: * w25q32dw - device: spi-flash@0 - parent: spi@10600 - driver: jedec_spi_nor - path: /soc/internal-regs/spi@10600/spi-flash@0 - type: NOR flash - block size: 0x1000 bytes - min I/O: 0x1 bytes - 0x000000000000-0x000000400000 : "w25q32dw" - 0x000000000000-0x0000003f0000 : "firmware" - 0x0000003f0000-0x000000400000 : "u-boot-env" => Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-19arm: mvebu: turris_omnia: fixup MTD partitions in Linux' DTBMarek Behún2-0/+91
Fixup SPI NOR partition nodes in Linux' device tree prior booting Linux. Linux' devicetree does not contain "u-boot-env" partition and we do not want to add it there because the address is different between stock U-Boot and current upstream U-Boot. Instead we add code that recreates partition nodes from scratch according to how U-Boot sees them (which is defined in U-Boot's device tree). Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-19ARM: dts: armada-385-turris-omnia: add `u-boot-env` NOR partitionMarek Behún1-0/+11
Specify a separate partition `u-boot-env` for U-Boot's env settings for the Turris Omnia board. Do this only in U-Boot's specific DTS. We do not want to do this in Linux' official DTS, because Omnia's stock U-Boot stores env at a different address, and there are still boards with stock U-Boot. In a subsequent patch will add board code that fixes Linux's DTB before booting Linux. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-19arm: kirkwood: Marvell Sheevaplug: Use Ethernet PHY name and address from ↵Tony Dinh1-12/+42
device tree - In DM Ethernet, the old "egiga0" name is no longer valid, so replace it with Ethernet PHY name from device tree. Also, Ethernet PHY address is available so read it from device tree. Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2021-07-19arm: kirkwood: Marvell Sheevaplug: Add DM SATA and remove IDE configsTony Dinh1-5/+4
Enable DM SATA, removed IDE driver, and add SATA MV driver. Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2021-07-19arm: kirkwood: Marvell Sheevaplug: Add DM Ethernet and DM SATA configsTony Dinh1-1/+5
Add DM_ETH, SATA_MV and associated configs to sheevaplug_defconfig Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2021-07-19arm: kirkwood: NSA310S: Use Ethernet PHY name from device treeTony Dinh1-8/+39
In DM Ethernet, the old "egiga0" name is no longer valid, so replace it with Ethernet PHY name from device tree. Also, Ethernet PHY address is available so read it from device tree. Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2021-07-19arm: kirkwood: NSA310S: Add DM SATA configsTony Dinh1-5/+5
Enable DM SATA, removed IDE driver, and add SATA MV driver. Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2021-07-19arm: kirkwood: NSA310S: Add DM USB, DM Ethernet, and DM SATA configsTony Dinh1-1/+11
Convert to Driver Model. - Add DM USB, DM Ethernet, and DM SATA configs to nsa310s_defconfig - Add CONFIG_DEFAULT_DEVICE_TREE to nsa310s_defconfig - Move CONFIG_ENV_SECT_SIZE from board file to nsa310s_defconfig - Add CONFIG_IDENT_STRING, and CONFIG_NET_RANDOM_ETHADDR to nsa310s_defconfig Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-19arm: kirkwood: NSA310S: Add device tree DTS for Zyxel NSA310S boardTony Dinh2-0/+319
Add device tree kirkwood-nsa310s.dts for Zyxel NSA310S board to convert to Driver Model. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-18Merge branch '2021-07-18-finalize-migrations'Tom Rini114-7615/+75
- With the deadline for DM_USB (host controller support), DM_VIDEO, DM_SPI_FLASH and DM_PCI now at 2 years past the release where their migration deadline was given, finish removing platforms and enforcing the switch.
2021-07-18Makefile: Remove DM_VIDEO and DM_SPI_FLASH checksWIP/2021-07-18-finalize-migrationsTom Rini1-4/+0
As we have now completed the DM_VIDEO and DM_SPI_FLASH migrations we can remove the checks. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18pci: Require DM_PCITom Rini5-984/+5
As the migration deadline has passed, require that DM_PCI be used. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18usb: Enforce DM_USB migration for USB_HOST devices.Tom Rini28-45/+51
As the deadline for migration to DM_USB, when using a USB host controller has now gone two years past the deadline, enforce migration. This is done by: - Ensuring that all host controller options (other than the very legacy old MUSB ones) now select USB_HOST. USB_HOST now enforces DM_USB and OF_CONTROL. - Remove other parts of Kconfig logic that had platforms pick DM_USB. - To keep Kconfig happy, have some select statements test for USB_HOST as well. - Re-order some Kconfig entries and menus so that we can cleanly pick host or gadget roles. For the various HCD options that have platform glue options, group them together and update dependencies in some cases. - As SPL_DM_USB is not required, on platforms that had not yet enabled it, disable it. Cc: Marek Vasut <marex@denx.de> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Samuel Holland <samuel@sholland.org> Cc: FUKAUMI Naoki <naobsd@gmail.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18treewide: Test on CONFIG_USB_HOST (or CONFIG_CMD_USB) not CONFIG_USBTom Rini7-7/+7
As the logic here is only used when we have a USB host controller, test on CONFIG_USB_HOST rather than CONFIG_USB in general. This lets us move towards using CONFIG_USB only as a menu symbol to say that we have some form of USB, and then USB_HOST or USB_GADGET depending on the role that USB plays within the build. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18tegra: Test on CONFIG_CMD_USB being enabled for distro bootcmdTom Rini1-1/+8
Reuse the common logic to allow for BOOT_TARGET_DEVICES to list USB as a possibility if we're building for a platform that will have USB but not if we don't, so that we don't hit the link-time check for trying to have USB boot on a non-USB system. Acked-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18ge_bx50v3: Remove unused USB related definesTom Rini1-11/+0
These USB defines do not change the build as there is no USB support enabled currently. Cc: Ian Ray <ian.ray@ge.com> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-07-18m68k: Remove M52277EVB boardTom Rini17-1581/+1
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. As this is also the last in family remove the related support as well. Cc: Angelo Durgehello <angelo.dureghello@timesys.com> Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18m68k: Remove M54451EVB boardTom Rini23-2254/+1
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. As this is also the last in family remove the related support as well. Cc: Angelo Durgehello <angelo.dureghello@timesys.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18m68k: Remove M54418TWR boardTom Rini21-1185/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Angelo Durgehello <angelo.dureghello@timesys.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18m68k: Remove M54455EVB boardTom Rini21-1544/+2
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Angelo Durgehello <angelo.dureghello@timesys.com> Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18vinco: Enable DM_USB and DM_SPI_FLASH supportTom Rini1-1/+2
As this platform already enables CONFIG_DM and CONFIG_OF_CONTROL, migrating to DM_USB and DM_SPI_FLASH is just a matter of enabling the correct options. Cc: Gregory CLEMENT <gregory.clement@bootlin.com> u-boot@lists.denx.de (open list) Reported-by: Marek Behun <marek.behun@nic.cz> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18Merge tag 'mips-pull-2021-07-18' of ↵WIP/18Jul2021Tom Rini8-7/+284
https://source.denx.de/u-boot/custodians/u-boot-mips - mips: gardena-smart-gateway: adjust config to new production values - mips: malta: convert to PCI DM and ETH DM
2021-07-18MIPS: malta: enable PCI driver modelDaniel Schwierzeck1-0/+4
Enable DM_PCI and DM_ETH on MIPS Malta. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-07-18MIPS: malta: add support for PCI driver modelDaniel Schwierzeck1-1/+79
As almost all peripherals are connected via PCI dependent on the used core card, PCI setup is always required. Thus run pci_init() including PCI scanning and probing and core card specific setups in board_early_init_r(). Also prepare support for dynamically managing the status of the different PCI DT nodes dependent on used core card via option CONFIG_OF_BOARD_FIXUP. Before this feature can be enabled, the call order of the fix_fdt() init hook in board_init_f needs to be changed. Otherwise rw_fdt_blob points to a read-only NOR flash address. Thus this options needs to stay disabled until the board_init_f problem could be solved. This breaks running the default U-Boot image on real HW using the FPGA core card but Qemu emulation still works. Currently Qemu is more important as MIPS CI tests depend on Malta and the deadline for PCI DM conversion will be enforced soon. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-07-18MIPS: malta: add DT bindings for PCI host controllerDaniel Schwierzeck1-0/+28
Add DT binding for GT64120 and MSC01 PCI controllers. Only GT64120 is enabled by default to support Qemu. The MSC01 node will be dynamically enabled by Malta board code dependent on the plugged core card. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-07-18pci: msc01: convert to driver modelDaniel Schwierzeck1-1/+71
This driver is currently only used on MIPS Malta boards. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-18pci: gt64120: convert to driver modelDaniel Schwierzeck1-1/+73
This driver is currently only used on MIPS Malta boards. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-18dm: pci: add option to map virtual system memory base addressDaniel Schwierzeck2-3/+19
On MIPS the DRAM start address respectively CONFIG_SYS_SDRAM_BASE is still used as a virtual, CPU-mapped address instead of being used as physical address. Converting all MIPS boards and generic MIPS code to fix that is not trivial. Due to the approaching deadline for PCI DM conversion, this workaround is required for MIPS boards with PCI support until the CONFIG_SYS_SDRAM_BASE issue could be solved. Add a compile-time option to let the PCI uclass core optionally map the DRAM address to a physical address when adding the PCI region of type PCI_REGION_SYS_MEMORY. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-18mips: mt7688: gardena-smart-gateway: Adjust to production valuesReto Schneider1-1/+10
This commit updates the default config with the values that will be used soon on the MediaTek MT7688 based GARDENA smart gateway. CONFIG_SPL_SYS_MALLOC_F_LEN had to be increased due to the more demanding new configuration. Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-18Merge tag 'efi-2021-10-rc1-2' of ↵Tom Rini11-480/+192
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2021-10-rc1-2 * Correct device path nodes for GUID partitions * Embed keys to check update capsules instead of providing then in DTB * Increase event log buffer size for measured boot.
2021-07-18doc: Update CapsuleUpdate READMEsIlias Apalodimas2-203/+125
Since we removed embeddingg the capsule key into a .dtb and fixed authenticated capsule updates for all boards, move the relevant documentation in the efi file and update it accordingly Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-07-18mkeficapsule: Remove dtb related optionsIlias Apalodimas1-222/+7
commit 322c813f4bec ("mkeficapsule: Add support for embedding public key in a dtb") added a bunch of options enabling the addition of the capsule public key in a dtb. Since now we embedded the key in U-Boot's .rodata we don't this this functionality anymore Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-07-18efi_capsule: Move signature from DTB to .rodataIlias Apalodimas7-47/+49
The capsule signature is now part of our DTB. This is problematic when a user is allowed to change/fixup that DTB from U-Boots command line since he can overwrite the signature as well. So Instead of adding the key on the DTB, embed it in the u-boot binary it self as part of it's .rodata. This assumes that the U-Boot binary we load is authenticated by a previous boot stage loader. Reviewed-by: Masami Hiramatsu <masami.hiramatsu@linaro.org> Tested-by: Masami Hiramatsu <masami.hiramatsu@linaro.org> Tested-by: Sughosh Ganu <sughosh.ganu@linaro.org> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
generated by cgit v1.1 at 2024-10-13 13:49:03 +0000