aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-10-08configs: apalis-tk1: Do not define CONFIG_SYS_BOOT_RAMDISK_HIGH againMichal Simek1-2/+0
CONFIG_SYS_BOOT_RAMDISK_HIGH is already defined in arch/arm/include/asm/config.h:10:#define CONFIG_SYS_BOOT_RAMDISK_HIGH that's why there is no reason to define it again in board file. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: zynqmp: Add a2197 memory board revAMichal Simek5-1/+580
Similar to processor board but i2c structure is completely different. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: zynqmp: Add System Controller for a2197-g/pMichal Simek8-0/+1087
Similar SCs but different wiring. - dc_i2c is connected to X-PRC cards that's why label is required to have an option to hook up some devices. - Exactly identify i2c devices on x-prc boards. In case of missing i2c connection devices won't be accessible. - USB 0 should be device mode with super speed. - USB 1 should be host mode. - Fix i2c mux reset pin entry - commented, not verified. - Fix i2c1 eeprom compatible string - it is an ST 128Kbit device. Need to use atmel fallback. - Fix si570 I2C slave address and add corresponding part numbers. - Enable AMS for system monitoring. - phy reset property should be commented because it will throw a warning dump when called from context that can sleep. No support for phys property (zynqmp phy driver) with SGMII. Add is-internal-pcspma property required by uboot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
2019-10-08arm64: zynqmp: Add generic a2197 system controller configMichal Simek4-0/+1378
Add generic configuration for a2197-p/-m/-g boards. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08net: xilinx_axiemac: Fill the phy node pointer in phydevSiva Durga Prasad Paladugu1-1/+6
This patch assings the phynode pointer to the phydev node as it is needed later in the corresponding phy driver to read phy properties from DT. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08gpio: zynq: fix issue in set gpio output directionAshok Reddy Soma1-1/+1
This patch fixes zynq_gpio_direction() to call driver specific zynq_gpio_set_value function rather than top level gpio_set_value. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: versal: Remove unneeded configs for mini configurationsSiva Durga Prasad Paladugu3-0/+6
The PSCI_RESET and EXPERT are not needed for mini configurations so remove them to save space. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: versal: mini_emmc: Enable fatwrite supportSiva Durga Prasad Paladugu2-0/+2
This patch enable fatwrite support for mini emmc configurations. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
2019-10-08env: Kconfig: Add environment default offset in versalT Karthik Reddy1-2/+3
This patch adds default offset & sector size values for environment variables to save in qspi/ospi flash for versal. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08drivers: usb: dwc3: setup phy before dwc3 core soft resetT Karthik Reddy1-2/+2
Phy setup should be done before dwc3 soft core reset as it is done in linux & this fixes unreliable detection of usb cable on host side. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: zynqmp: Enable 2 NAND chips support for zynqmp_mini_nandT Karthik Reddy1-0/+1
This patch enables 2 nand chips support for zynqmp mini nand Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08doc: README.xilinx: Add dt bindingsT Karthik Reddy2-0/+39
Devicetree bindings are already specified in Linux kernel documentation. Instead of maintaining same dt bindings in U-Boot doc specify path to dt bindings in Linux kernel & documenting specific changes that are in U-Boot. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08mmc: zynq_sdhci: Remove check for DM_MMC configSiva Durga Prasad Paladugu1-2/+2
The zynq_sdhci drivers depends on DM_MMC in Kconfig so no need to check for DM_MMC in the driver so this patch removes it. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: zynqmp: Switch spi-flash to jedec, spi-nor compatibleMichal Simek1-1/+1
Change has been done across the whole tree only zynqmp-mini-qspi hasn't been fixed. Origin changed done by commit ffd4c7c2ecb7 ("dts: switch spi-flash to jedec, spi-nor compatible") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08net: phy: Add gmiitorgmii converter supportSiva Durga Prasad Paladugu5-0/+200
This patch adds support for gmiitorgmii converter. This converter sits between the MAC and the external phy MAC <==> GMII2RGMII <==> RGMII_PHY. The ethernet driver probes this bridge and this bridge driver probes real phy driver and invokes the real phy functionalities as requested. This bridge just needs to be configured based on real phy negotiated speed and duplex. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08ARM: zynq: Remove all Xilinx private commandsMichal Simek1-51/+3
All platforms have been moved to distro boot that's why remove the rest of configurations to have unified boot flow. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08ARM: zynq: Use {} around variables for qspi and nand boot cmdsMichal Simek1-2/+2
Follow conventions and used {} around variables. Fixes: 90e97ab31e02 ("arm: zynq: Define distro boot commnads for qspi, nand and nor") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08ARM: zynq: Fix NOR boot modeMichal Simek1-2/+2
There are two typos in this command that's why it couldn't work properly. This bootmode is almost unused from the beggining on this SoC. Fixes: 90e97ab31e02 ("arm: zynq: Define distro boot commnads for qspi, nand and nor") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08ARM: zynq: Enable USB1 as secondary boot deviceMichal Simek1-1/+1
Xilinx Zynq SoC has two usb controllers and both could be used as secondary boot method. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08ARM: zynq: Specify MMC controller number for boot sequenceMichal Simek2-2/+2
Xilinx Zynq SoC has two sdhci controllers but boot is only possible from the first one. That's why there is a need to specify controller number. mmc1 is supposed to be secondary boot device and should be also listed in distribution boot. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08net: phy: Define init routine and register generic phy driverSiva Durga Prasad Paladugu1-0/+7
This patch define init routine for generic phy driver and registers it using phy_register as this generic phy driver also needs to be relocated incase of manual reloc. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08ARM: zynq: dts: Added alias for usb nodeVipul Kumar1-0/+1
This patch added alias for usb node in dts file. Signed-off-by: Vipul Kumar <vipul.kumar@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08ARM: zynq: Align model name with DTMichal Simek1-0/+4
Use model property to distinguish different configurations. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: zynqmp: Add idcodes for new RFSoC silicons ZU48DR and ZU49DRSiva Durga Prasad Paladugu1-0/+8
Add zu48dr and zu49dr to the list of zynqmp devices. The zu48dr and zu49dr are the new RFSoC silicons with id values of 0x7b and 0x7e. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: versal: Fix for OCM overwriting issueAshok Reddy Soma1-0/+3
This patch reduces the console buffer size from 2048 to 1024, thus fixes OCM overwriting issue. Differences are in bss section as is shown from output: xilinx_versal_mini: all -2056 bss -2048 text -8 u-boot: add: 0/0, grow: 0/-3 bytes: 0/-2056 (-2056) function old new delta cli_simple_run_command 340 332 -8 static.lastcommand 2049 1025 -1024 console_buffer 2049 1025 -1024 Better would be to use PPU RAM but this change is also aligned with changes done in ZynqMP mini configurations. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08ARM: zynq: Increase input buffer console size to 2kMichal Simek1-0/+1
ZynqMP and Versal is using 2k that's why aligned all platform together to be able to use the same scripts. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08ARM: zynq: Increase init ram size by 4KSiva Durga Prasad Paladugu1-1/+1
Increase init ram size by 4K such that more stack space will be available during initialization as the present stackspace is not sufficient if DEBUG option is enabled and causes system hang. Increasing init ram size provides sufficient stack space during init even if DEBUG enabled and solves the hang issue. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08ARM: zynq: Do not enable NETBSD support by defaultMichal Simek1-0/+2
This option is disable in Xilinx tree for quite a long time that's why let's disable it in mainline. If there is anybody who requires this options then it should be moved to Kconfig first and should be removed from this config. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08fpga: zynqmp: Fix second local variable declarationMichal Simek1-1/+1
No reason to define new_buf again. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08mmc: sdhci: Move ZYNQ_HISPD_BROKEN to KconfigSiva Durga Prasad Paladugu2-1/+6
This patch moves CONFIG_ZYNQ_HISPD_BROKEN to Kconfig Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08net: zynq_gem: Remove check for VersalSiva Durga Prasad Paladugu1-4/+0
This patch removes check for Versal platform in gem driver as it now supports clock setting through clock framework. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08clk: versal: Add clock driver supportSiva Durga Prasad Paladugu6-0/+841
This patch adds clock driver support for Versal platform. The clock driver queries and performs clock operations using PLM firmware by communicating with it using SMC calls. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08net: zynq_gem: Add new versal compatible stringSiva Durga Prasad Paladugu1-0/+1
This patch adds new versal compatible string to GEM driver for Versal platform. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08net: gem: Remove DECLARE_GLOBAL_DATA_PTR from gem driverMichal Simek1-2/+0
GD is not used anywhere that's why there is no reason to have this macro in the driver. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: zynqmp: Add new jtag distro boot commandSiva Durga Prasad Paladugu2-1/+10
This patch adds new jtag distro boot command to look for bootscript file in DDR and execute it first incase of jtag bootmode. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: zynqmp: Update scriptaddr value to 512MBSiva Durga Prasad Paladugu1-1/+1
This patch updates scriptaddr value to 512MB as having it at 32MB has high chance of script corruption incase of bigger kernel. Be aware that 512MB is used for SPL malloc area that's why images should be loaded after SPL (the best after u-boot relocation). Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: versal: Change boot script offset address in versalT Karthik Reddy1-1/+1
With the current boot script offset address in qspi is being overlaped by BOOT.BIN as it is over 90MB with fpga included. So moving the script offset address to end of flash after "bootenv" mtd partition. Here we are considering qspi flash size >= 128Mbytes on versal and left 512Kbytes space to save boot.scr script. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: versal: Add new dfu usb distro boot commandT Karthik Reddy2-0/+15
This patch adds new dfu usb distro boot command to look for bootscript from dfu-util and runs it. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
2019-10-08arm64: versal: Add new jtag distro boot commandSiva Durga Prasad Paladugu2-2/+11
This patch adds new jtag distro boot command to look for bootscript file in DDR and execute it first incase of jtag bootmode. This patch also updates scriptaddr to 512MB as there is high of script corruption incase of bigger kernel image. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: versal: Define configs related to USB DFU functionalitySiva Durga Prasad Paladugu1-1/+24
This patch defines macros required for DFU functionality for Xilinx Versal platform. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08zynqmp: firmware: Add Xilinx ZynqMP firmware driverRajan Vaja5-0/+28
Add simple ZynqMP firmware drive to populate child nodes under zynqmp_firmware DT node. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: zynqmp: Provide a Kconfig option to disable OCM and TCM MMU mappingMichal Simek2-8/+24
This patch provides an option to enable/disable OCM and TCM memory into MMU table with corresponding memory attributes. The same change was done for ZynqMP by commit 189bec47ab1f ("arm64: zynqmp: Provide a Kconfig option to define OCM and TCM in MMU") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: versal: Enable memory mapping via DTMichal Simek3-11/+35
Code reads DT and setup MMU table based on memory node. This will ensure that only DT needs to be changed. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: zynqmp: Set initrd_high to as high as possibleT Karthik Reddy3-3/+8
This patch is setting up the initrd_high to as high as possible by leaving max stack size for u-boot so that bigger rootfs can also be loaded by u-boot for booting kernel. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: versal: Set initrd_high to as high as possibleSiva Durga Prasad Paladugu3-1/+22
This patch is setting up the initrd_high to as high as possible by leaving max stack size for u-boot so that bigger rootfs can also be loaded by u-boot for booting kernel. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: versal: fpga: Add PL bit stream load supportSiva Durga Prasad Paladugu7-1/+100
This patch adds PL bitstream load support for Versal platform. The PL bitstream is loaded by making an SMC to ATF which in turn communicates with platform firmware which configures and loads PL bitstream on to PL. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: versal: Also record versal name to versal fragmentMichal Simek1-0/+1
Just to make sure that also drivers with versal name are assigned to proper fragment. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: versal: Define board_late_init for versalSiva Durga Prasad Paladugu7-0/+139
Define board_late_init which performs bootmode detection and prepares corresponding distro boot commaand sequence. Also disable it for mini platforms because simply there is no need to have it enabled. But also disable it for virtual platform because Qemu is not modelling this register space that's why travis testing would fail. This configuration should be reverted when mainline Qemu is updated. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: zynqmp: Enable SPI support in SPL for zcu104Michal Simek1-0/+3
It is enabling this mode but full boot is not validated yet. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-08arm64: zynqmp: Add u-boot,dm-pre-reloc to clk300 nodeMichal Simek1-0/+1
This node is used by qspi driver for supporting qspi boot mode in SPL. Similar changes have beeen done by commit a9022b017a90 ("ARM64: zynqmp: Add u-boot,dm-pre-reloc to clk nodes") Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit v1.1 at 2024-08-14 07:03:47 +0000