aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-06-19corstone1000: add nvmxip, fwu-mdata and gpt optionsWIP/2023-06-19-corstone1000-fwu-updatesRui Miguel Silva3-10/+14
Enable the newest features: nvmxip, fwu-metadata and gpt. Commands to print the partition info, gpt info and fwu metadata will be available. Adjust also env boot script the address of the bootbank with the new gpt layout, and also remove the not needed kernel address bank0 and bank1 and retrieve function that would test the bank flag before and now we are getting the info from the fwu metadata. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
2023-06-19corstone1000: set kernel_addr based on boot_idxRui Miguel Silva2-1/+56
We need to distinguish between boot banks and from which partition to load the kernel+initramfs to memory. For that, fetch the boot index, fetch the correspondent partition, calculate the correct kernel address and then set the env variable kernel_addr with that value. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
2023-06-19corstone1000: add boot indexRui Miguel Silva1-1/+17
it is expected that the firmware that runs before u-boot somehow provide the information of the bank for now we will fetch the info from the metadata since the Secure enclave is the one responsible for this information. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
2023-06-19corstone1000: add fwu-metadata store infoRui Miguel Silva1-1/+6
Add fwu-mdata node and handle for the reference nvmxip-qspi. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
2023-06-19nvmxip: move header to includeRui Miguel Silva2-1/+1
Move header to include to allow external code to get the internal bdev structures to access block device operations. as at it, just add the UCLASS_NVMXIP string so we get the correct output in partitions listing. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
2023-06-19fwu_metadata: make sure structures are packedRui Miguel Silva1-3/+4
The fwu metadata in the metadata partitions should/are packed to guarantee that the info is correct in all platforms. Also the size of them are used to calculate the crc32 and that is important to get it right. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-06-16Merge tag 'u-boot-stm32-20230616' of ↵WIP/16Jun2023-nextTom Rini51-430/+2031
https://source.denx.de/u-boot/custodians/u-boot-stm into next serial: stm32: Fixes to avoid suprious characters Use U-Boot device tree to configure MTD partitions stm32mp13 and stm32mp15 boards stm32mp: stm32prog: Add support of ENV partition type config: stm32mp15: remove CONFIG_FASTBOOT_USB_DEV and CONFIG_FASTBOOT_CMD_OEM_FORMAT stm32: Add IWDG handling into PSCI suspend code stm32: Fix OF_LIST on DHCOR stm32: Add missing header for save_boot_params stm32: Use __section(".data") with dot in the section name on DHSOM stm32mp: soome changes and fixes for STM32MP13 and STM32MP15 boards dts: stm32mp: alignment with v6.3 dts: stm32f769-disco: remove the dsi_host node configs: stm32f746-disco: remove a useless comment
2023-06-16serial: stm32: BRR must be set only when usart is disablePatrice Chotard1-0/+6
To avoid spurious chars, BRR register must only be written when USART is disabled. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-06-16serial: stm32: Wait TC bit before performing initializationPatrice Chotard2-0/+16
In case there is still chars from previous bootstage to transmit, wait for TC (Transmission Complete) bit to be set which ensure that the last data written in the USART_TDR has been transmitted out of the shift register. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-06-16configs: stm32f746-disco: remove a useless commentDario Binacchi1-2/+0
Commit 8fc78fc73b7f9d ("configs: migrate CONFIG_BMP_16/24/32BPP to defconfigs") made the comment useless. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-06-16ARM: dts: stm32f769-disco: remove the dsi_host nodeDario Binacchi1-5/+0
The node has become useless, as described in the commit 754815b854258 ("video: stm32: remove the compatible "synopsys, dw-mipi-dsi" support") Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-06-16ARM: dts: stm32mp: alignment with v6.3Patrick Delaunay12-38/+1459
Device tree alignment with Linux kernel v6.3: - f5a058023239 - ARM: dts: stm32: add i2c nodes into stm32mp131.dtsi - 8539ebb435a5 - ARM: dts: stm32: enable i2c1 and i2c5 on stm32mp135f-dk.dts - 8539ebb435a5 - ARM: dts: stm32: add spi nodes into stm32mp131.dtsi - 15f72e0da4da - ARM: dts: stm32: add pinctrl and disabled spi5 node in stm32mp135f-dk - ea99a5a02ebc - ARM: dts: stm32: Create separate pinmux for qspi cs pin in stm32mp15-pinctrl.dtsi - a306d8962a24 - ARM: dts: stm32: Rename mdio0 to mdio - 0a5ebb1f3367 - ARM: dts: stm32: Replace SAI format with dai-format DT property - ccdab19738a6 - ARM: dts: stm32: add adc support to stm32mp13 - 022932ab55fd - ARM: dts: stm32: add adc pins muxing on stm32mp135f-dk - ab2806ddad9d - ARM: dts: stm32: add dummy vdd_adc regulator on stm32mp135f-dk - e46a180c060f - ARM: dts: stm32: add adc support on stm32mp135f-dk - 9ebf215fbae1 - ARM: dts: stm32: add PWR fixed regulators on stm32mp131 - 16f4ff60519a - ARM: dts: stm32: add USBPHYC and dual USB HS PHY support on stm32mp131 - 4a47f0f3e936 - ARM: dts: stm32: add UBSH EHCI and OHCI support on stm32mp131 - 2a46bb66c47f - ARM: dts: stm32: add USB OTG HS support on stm32mp131 - 9ebf215fbae1 - ARM: dts: stm32: add fixed regulators to support usb on stm32mp135f-dk - 16f4ff60519a - ARM: dts: stm32: enable USB HS phys on stm32mp135f-dk - c4e7254cf6dc - ARM: dts: stm32: enable USB Host EHCI on stm32mp135f-dk - 44978e135916 - ARM: dts: stm32: add pins for stm32g0 typec controller on stm32mp13 - 4f532403b1e5 - ARM: dts: stm32: enable USB OTG in dual role mode on stm32mp135f-dk - e1f15571c96c - ARM: dts: stm32: add mcp23017 pinctrl entry for stm32mp13 - 6cc71374002e - ARM: dts: stm32: add mcp23017 IO expander on I2C1 on stm32mp135f-dk - 7ffd2266bd32 - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcor-som - 21d83512bf2b - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcom-som - 732dbcf52f74 - ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp151a-prtt1l - 003b7c6b24f4 - ARM: dts: stm32: remove sai kernel clock on stm32mp15xx-dkx - f2b17b39bfff - ARM: dts: stm32: rename sound card on stm32mp15xx-dkx - dee3cb759d3d - ARM: dts: stm32: Remove the pins-are-numbered property - ae8cf3b48727 - ARM: dts: stm32: add i2s nodes on stm32mp131 - 619746a27bd0 - ARM: dts: stm32: add sai nodes on stm32mp131 - c5e05d08ef90 - ARM: dts: stm32: add spdifrx node on stm32mp131 - 0a5afd3ee0d0 - ARM: dts: stm32: add dfsdm node on stm32mp131 - bf9d876bea2e - ARM: dts: stm32: add timers support on stm32mp131 - a3183748371d - ARM: dts: stm32: add timer pins muxing for stm32mp135f-dk - a9060c1326bc - ARM: dts: stm32: add timers support on stm32mp135f-dk - a12154058f75 - ARM: dts: stm32: Fix User button on stm32mp135f-dk - 2f33df889e99 - ARM: dts: stm32: Use new media bus type macros - 366384e49551 - ARM: dts: stm32: Update part number NVMEM description on stm32mp131 Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16media: dt-bindings: media: Add macros for video interface bus typesPatrick Delaunay1-0/+16
Add a new dt-bindings/media/video-interfaces.h header that defines macros corresponding to the bus types from media/video-interfaces.yaml. This allows avoiding hardcoded constants in device tree sources. Based on linux commit f7eeb0084593 ("media: dt-bindings: media: Add macros for video interface bus types") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16pmic: stpmic1: support new prefix node name for regulatorPatrick Delaunay1-0/+2
The '_' character is discouraged in the node name, this patch adds the new prefix of regulator subnode, with the '-' character, in STM32MP1 driver to support the new naming rule in Linux kernel device trees. It is a preliminary patch before Linux device tree synchronization for STMicroelectronics boards. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16stm32mp: stm32prog: use the decimal format by default for offset parsingPatrick Delaunay1-1/+1
Change the default base for offset parsing with simple_strtoull(), so offset in flashlayout is coded in base 10 by default, even if string start with '0'. The Octal encoding is not supported. The base 16 is still supported when the '0x' header is detected. This patch solves an unexpected parsing result when the address, provided by decimal value is starting by 0, for example 0x4400 = 00017408 is a invalid with current code. ... P 0x04 fsbl1 Binary mmc0 00017408 tf-a.stm32 .... Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16stm32mp: stm32prog: fix OTP read/write error managementPatrick Delaunay1-1/+8
Avoid to ignore the OTP read/write error and transmits the error to STM32CubeProgrammer. Today the error is only displayed in log error: so the user on HOST thinks the OTP operation is performed. Reported-by: Mickael GARDET <m.gardet@overkiz.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Fixes: 75ea9e75931c ("stm32mp: stm32prog: add TEE support in stm32prog command") Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16configs: stm32mp1: reduce DDR_CACHEABLE_SIZE to supported 256MB DDRPatrick Delaunay2-2/+2
Reduces the CONFIG_DDR_CACHEABLE_SIZE, the size of DDR mapped cacheable before relocation, to support DDR with only 256MB because the OP-TEE reserved memory is located at end of the DDR. By default the new size of 128MB cacheable memory is enough in dram_bank_mmu_setup() for early_enable_caches() in arch_cpu_init() and is correct for DDR size = 256MB. After relocation the real size of DDR, excluding the no-map reserved memory, is used after the U-Boot device tree parsing. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16stm32mp: bsec: add check on null size in misc opsPatrick Delaunay1-2/+2
Add a protection in misc bsec ops for request with null size. For example OP-TEE error occurs when get_eth_nb() return 0 in setup_mac_address() for unknown part number because U-Boot read 0 OTPs. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16stm32mp: add support of STM32MP15x Rev.YPatrick Delaunay2-1/+5
Add support of STM32MP15x Rev.Y for the Silicon revision REV_ID = 0x2003. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16ARM: stm32: Use __section(".data") with dot in the section name on DHSOMMarek Vasut1-3/+3
The correct specifier of the section is ".data" and not "data", use the former to place the variables in ".data" section. Fixes: 731fd50e27f ("ARM: stm32: Implement board coding on AV96") Fixes: 92ca0f7446c ("ARM: dts: stm32: Synchronize DDR setttings on DH SoMs") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-06-16ARM: stm32: Add missing header for save_boot_paramsMarek Vasut1-0/+1
The get_stm32mp_rom_api_table() function is defined in sys_params.h , add the missing header to avoid compiler warning. Fixes: dbeaca79b79 ("ARM: stm32: Factor out save_boot_params") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-06-16ARM: stm32: Fix OF_LIST on DHCORTom Rini1-0/+1
The ITS file used to build the images here lists three dtb files as being used. Today, these are built by the logic that will over-build dtb files based on SOC/etc symbols being set. To future proof this platform and be generally correct, we list all 3 of the device trees used here in OF_LIST. Cc: Marek Vasut <marex@denx.de> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-06-16ARM: stm32: Add IWDG handling into PSCI suspend codeMarek Vasut2-5/+70
In case the IWDG is enabled by either U-Boot or Linux, the IWDG can never be disabled again. That includes low power states, which means that if the IWDG is enabled, the SoC would reset itself after a while in suspend via the IWDG. This is not desired behavior. It is possible to enable IWDG pre-timeout IRQ which is routed into the EXTI, and use that IRQ to wake the CPU up before the IWDG timeout is reached and reset is triggered. This pre-timeout IRQ can be used to reload the WDT and then suspend the CPU again every once in a while. Implement this functionality for both IWDG1 and IWDG2 by reading out all the unmasked IRQs, comparing the list with currently pending IRQs in GICv3: - If any IRQ is pending and it is NOT IWDG1 or IWDG2 pre-timeout IRQ, wake up and let OS handle the IRQs - If IWDG1 or IWDG2 IRQ is pending and no other IRQ is pending, ping the respective IWDG and suspend again This does not seem to have any adverse impact on power consumption in suspend. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2023-06-16config: stm32mp15: remove CONFIG_FASTBOOT_CMD_OEM_FORMATPatrick Delaunay5-18/+0
Remove the support of the fastboot "oem format" command for STM32MP15x boards and removed the associated env variable "partitions". This command is not required; with fastboot tool, the GPT partition can be handle with "flash" command in "gpt" target (=CONFIG_FASTBOOT_GPT_NAME), for example: fastboot flash gpt gpt.bin This patch avoids to define the GPT partitioning in U-Boot environment, which is incompatible with planned modifications, for example to support TF-A firmware update. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16config: stm32mp15: remove CONFIG_FASTBOOT_USB_DEVPatrick Delaunay3-3/+0
The CONFIG_FASTBOOT_USB_DEV is used to select USB OTG controller other than 0 but it is not the case for STM32MP15 boards; it can be removed to simplify the STM32MP15 defconfig files. On STM32MP15x boards, we have only one USB device with instance 0, so the device is hardcoded arch/arm/mach-stm32mp/cpu.c with the command "fastboot 0" and this define is not used in config files (include/configs/stm32mp15_st_common.h). Fixes: 4633fd51c5d7 ("stm32mp1: activate FASTBOOT on eMMC") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16stm32mp: stm32prog: Add support of FWU_MDATA partition typePatrick Delaunay2-0/+12
Add support of "FWU_MDATA" partition type in flashlayout to select the TF-A firmware update metadata partition type guid, associated to U-Boot "system" partition type guid, FWU_MDATA_GUID introduced by commit 2eaedc95164f ("FWU: Add FWU metadata structure and driver for accessing metadata") and used in gpt_get_mdata_partitions() for commit 554b38f7a532 ("FWU: Add FWU metadata access driver for GPT partitioned block devices") See also recommendation in FWU-PSA-A_DEN0118_1.0ALP3.pdf 4.1.2 Metadata integration with GPT When embedded in a GPT, each metadata replica occupies a single partition with PartitionTypeGUID = metadata_uuid. UUID = 8a7a84a0-8387-40f6-ab41-a8b9a5a60d23 Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16stm32mp: stm32prog: Add support of ESP partition typePatrick Delaunay2-2/+14
Add support of "ESP" partition type in flashlayout to select the "EFI System Partition", associated to U-Boot "system" partition type guid, PARTITION_SYSTEM_GUID = C12A7328-F81F-11d2-BA4B-00A0C93EC93B. This partition is the bootable partition for efi boot. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16stm32mp: stm32prog: Add support of ENV partition typePatrick Delaunay2-0/+6
Add support of "ENV" partition type in flashlayout to select the "u-boot-env" GUID, with PARTITION_U_BOOT_ENVIRONMENT = 3de21764-95bd-54bd-a5c3-4abe786f38a8, that mean a partition holding a U-Boot environment introduced by commit c0364ce1c695 ("doc/README.gpt: define partition type GUID for U-Boot environment")' Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16arm: dts: stm32: Add partitions in flash0 and nand node for ↵Patrick Delaunay4-6/+54
stm32mp15xx-dhcom/dhcor Add partitions subnode in flash0 for stm32mp157xx-dhcom/dhcor boards. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16configs: stm32mp1: disable CMD_MTDPARTSPatrice Chotard4-4/+0
Disable CMD_MTDPARTS as it's no more needed and it is strongly encouraged to avoid using this command anymore. (see comments in ./cmd/Kconfig:2422). Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16stm32mp: stm32prog: Remove tee_detected from stm32prog_data structPatrice Chotard4-27/+0
As stm32prog_get_tee_partitions() is no more used, remove tee_detected boolean from stm32prog_data struct and all code using it. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16board: st: remove board_mtdparts_defaultPatrick Delaunay3-244/+0
Remove the function board_mtdparts_default and the associated file or configs, only used by the CONFIG_SYS_MTDPARTS_RUNTIME now removed. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16board: stm32mp1: use fdt_copy_fixed_partitionsPatrick Delaunay5-19/+1
Copy the fixed partition nodes from U-Boot device tree to Linux kernel device tree to dynamically configure the MTD partitions. fdt_copy_fixed_partitions is only based on device tree and replace the function fdt_fixup_mtdparts based on mtdparts variable; the variable mtdid and mtdparts are not more required. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16configs: stm32mp: Disable SYS_MTDPARTS_RUNTIME for stm32mp15 and stm32mp13Patrice Chotard4-4/+0
As we don't use anymore MTDPARTS_xx Kconfig variables (MTDPARTS_NAND0_BOOT, MTDPARTS_NOR0_BOOT...), disable SYS_MTDPARTS_RUNTIME. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16arm: dts: stm32: Add partitions in flash0 and nand node for stm32mp15xx-ev1Patrice Chotard3-3/+184
Add partitions subnode in flash0 and nand nodes for all stm32mp157xx-ev1 boards. Update only the file stm32mp157c-ev1-*u-boot.dtsi, included by other files stm32mp15*-ev1-*-u-boot.dtsi. For SCMI variant of device tree used with stm32mp15_defconfig add partitions needed by TF-A firmware update: - metadata to save the TF-A information: 2 copy - fip-a / fip-b: two FIP slots, used for system A/B (seamless) update - the previous "fsbl" partition with 2 copy of TFA is replaced by 2 partitions (only one copy in each MTD partition) to simplify the update: no need to managed this copy on update, need to update the two partition (skip bad block for NAND) The offset for ENV partition are also updated in stm32mp15_defconfig Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16arm: dts: stm32: Align stm32mp15xx-*-scmi-u-boot.dtsi filePatrick Delaunay3-0/+48
Update "secure" version of STM32 boards based on SCMI when RCC_TZCR.TZEN=1 stm32mp15xx-*-scmi-u-boot.dtsi with latest patches on files stm32mp15xx-*-u-boot.dtsi. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16stm32mp: stm32prog: Remove usage of "mtdparts" functionPatrice Chotard1-23/+19
Motivation for this patch is to remove usage of function define in cmd/mtdparts.c interface, based on env variables mtdids and mtdparts: mtdparts_init() and find_dev_and_part(). See commit 938db6fe5da3 ("cmd: mtdparts: describe as legacy") Now, all MTD devices are populated with their partition's information found in DT, accessible in MTD devices. Use these information to find the wanted partitions, no more need of find_dev_and_part() usage. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16dfu: mtd: remove direct call of mtdparts_init functionPatrick Delaunay2-16/+19
With MTD support in driver model, the direct call of mtdparts_init should be avoided and replaced by mtd_probe_devices. With the modificaton when MTDIDS/MTDPARTS are empty the OF fallback with partition describe in device tree is correctly performed, introduced by commit dc339bf784f0 ("mtd: add support for parsing partitions defined in OF"). With this patch the dependency with CONFIG_CMD_MTDPARTS is removed. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16fdt_support: add fdt_copy_fixed_partitions functionPatrick Delaunay2-0/+81
Add a new function fdt_copy_fixed_partitions to copy the fixed partition nodes from U-Boot device tree to Linux kernel device tree and to dynamically configure the MTD partitions. This function fdt_copy_fixed_partitions is only based on device tree with livetree compatible function and replace the function fdt_fixup_mtdparts based on mtdparts variable. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2023-06-16fdt_support: include dm/ofnode.hPatrick Delaunay1-1/+1
This patch is a preliminary patch to use ofnode function is fdt_support to read the U-Boot device tree with livetree compatible functions. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-06-15Merge tag 'fsl-qoriq-2023-6-15' of ↵WIP/15Jun2023-nextTom Rini31-3558/+2593
https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq into next DM_MDIO/CMD for ls1046afrwy sync APIs for fsl-mc ldpaa_eth update lx2160ardb recv support. net: dsa fix of fallback lookup
2023-06-15configs: ls1046afrwy: enable DM_MDIO and DM_CMDCamelia Groza2-0/+4
With DM_ETH configured by default, complete the Ethernet enablement for LS1046AFRWY by activating DM_MDIO. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-15board: freescale: ls1046afrwy: enumerate PCI devicesCamelia Groza1-0/+3
Call pci_init() from board_init() to force PCI enumeration at probe time. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-15arm: dts: ls1046afrwy: add the FMan Ethernet nodesCamelia Groza1-1/+47
Describe the FMan Ethernet interfaces present on the board. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-15net: fsl-mc: sync remaining MC commandsIoana Ciornei5-51/+35
This patch targets the last remaining commands left to sync to their latest form - mainly the mc_get_version() API. Besides this, remove any macro which is now of no help. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-15net: fsl-mc: sync DPIO MC APIsIoana Ciornei2-210/+220
Sync the Data Path IO APIs to their latest form, this means the layout of each command is created based on structures which clearly describe the endianness of each field rather than some macros. The command version is kept in place, meaning that the minimum MC version accepted is not changed in any way. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-15net: fsl-mc: sync DPSPARSER MC APIsIoana Ciornei2-137/+126
Sync the Data Path Soft Parser APIs to their latest form, this means the layout of each command is created based on structures which clearly describe the endianness of each field rather than some macros. The command version is kept in place, meaning that the minimum MC version accepted is not changed in any way. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-15net: fsl-mc: sync DPNI MC APIsIoana Ciornei4-729/+990
Sync the Data Path Network Interface APIs to their latest form, this means the layout of each command is created based on structures which clearly describe the endianness of each field rather than some macros. The command version is kept in place, meaning that the minimum MC version accepted is not changed in any way. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-15net: fsl-mc: sync DPRC MC APIsIoana Ciornei2-376/+280
Sync the Data Resource Container APIs to their latest form, this means the layout of each command is created based on structures which clearly describe the endianness of each field rather than some macros. The command version is kept in place, meaning that the minimum MC version accepted is not changed in any way. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-06-15net: fsl-mc: sync DPMAC MC APIsIoana Ciornei2-210/+215
Sync the Data Path MAC APIs to their latest form, this means the layout of each command is created based on structures which clearly describe the endianness of each field rather than some macros. The command version is kept in place, meaning that the minimum MC version accepted is not changed in any way. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
generated by cgit v1.1 at 2024-08-05 16:58:31 +0000