aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-12-22pylibfdt: Fix version normalization warningWIP/2022-12-22-assorted-important-fixesMarek Vasut1-0/+4
Fix the following version normalization warning: " /usr/lib/python3/dist-packages/setuptools/dist.py:530: UserWarning: Normalizing '2023.01' to '2023.1' " Using suggestion from Richard Jones: https://github.com/pypa/setuptools/issues/308#issuecomment-405817468 Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-22net: nuvoton: fix build broken for use phy_get_interface_by_nameJim Liu1-4/+4
The original patch is use phy_get_interface_by_name to set interface. The new patch is use dev_read_phy_mode to replace it. Signed-off-by: Jim Liu <JJLIU0@nuvoton.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2022-12-22powerpc/mpc85xx: Disable AltiVec and VSX instructionsPali Rohár1-0/+4
All vector instructions on powerpc mpc85xx must not be used because U-Boot does not enable them. Usage cause random crashes. SPE vector instructions are already disabled by compiler flags, so disable also AltiVec and VSX vector instructions. Linux kernel disables AltiVec and VSX instructions too. Signed-off-by: Pali Rohár <pali@kernel.org>
2022-12-22powerpc/mpc85xx: Improve disabling of SPE instructionsPali Rohár1-3/+4
Specifying -mspe=no also disables usage of SPE instructions. It is documented in "[PATCH,rs6000] make -mno-spe work as expected" email: http://gcc.gnu.org/ml/gcc-patches/2008-04/msg00311.html So replace -mspe=yes by -mspe=no, so make it clear that u-boot has to be compiled without SPE instructions. Linux kernel contains following Makefile code to achieve it: # No SPE instruction when building kernel # (We use all available options to help semi-broken compilers) KBUILD_CFLAGS += $(call cc-option,-mno-spe) KBUILD_CFLAGS += $(call cc-option,-mspe=no) Do same for U-Boot. Signed-off-by: Pali Rohár <pali@kernel.org>
2022-12-22powerpc/mpc85xx: Pass correct cpu compiler flagsPali Rohár1-1/+11
When gcc's default cpu (selected by --with-cpu= during gcc's configure phase) does not match target U-Boot board cpu then U-Boot binary does not have to be compiled correctly. Lot of distributions sets gcc's default cpu to generic powerpc variant which works fine. U-Boot already pass -Wa,-me500 flag to gcc which instructs GNU AS to accept e500 specific instructions when processing assembler source files (.S). This affects also assembly files generated by gcc from C source files. And because gcc for generic powerpc cpu puts '.machine ppc' at the beginning of the generated assembly file, it basically overwrites -me500 flag by which was GNU AS invoked (from U-boot build system). It started to be an issue since binutils 2.38 which does not keep enabled extra functional units selected by previous cpu. Hence issuing directive '.machine ppc' (generated by gcc for generic powerpc) after '.machine e500' (specifying at command line) disables usage of e500 specific instructions. And compiling arch/powerpc/cpu/mpc85xx/tlb.c code throws following assembler errors: {standard input}: Assembler messages: {standard input}:127: Error: unrecognized opcode: `tlbre' {standard input}:418: Error: unrecognized opcode: `tlbre' {standard input}:821: Error: unrecognized opcode: `msync' {standard input}:821: Error: unrecognized opcode: `tlbwe' {standard input}:884: Error: unrecognized opcode: `tlbsx' This issue was already hit by Debian people and is reported in bug tracker: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1003490 Calling gcc with -mcpu=8540 flag fixes this issue because -mcpu=8540 tells gcc to compile code for e500 core/cpu (overwriting gcc's default cpu) and does not put '.machine ppc' directive into assembly anymore. Also if gcc is invoked with -mcpu=8540 then it pass -me500 flag to GNU AS. So it is unnecessary to manually specify -Wa,-me500 flag because it is implicitly added. Fix this issue properly by specifying correct -mcpu compiler flag for all supported powerpc cores in U-Boot mpc85xx platform, which are: e500v1, e500v2, e500mc, e5500 and e6500. For specifying e500v1 and e500v2 cores, gcc has unintuitive -mcpu=8540 and -mcpu=8548 flag names, for other cores -mcpu matches core name. The only difference between gcc's -mcpu=8540 and -mcpu=8548 flags is support for double precision floating point SPE instructions. As U-Boot does not use floating point, it is fine to use -mcpu=8540 for both e500v1 and e500v2 cores. Moreover gcc 9 completely removed e500 floating point support, so since gcc 9 -mcpu=8548 is just alias to -mcpu=8540. Note that U-Boot's CONFIG_E500 option is set also for other cpus, not only for e500v1 and e500v2. So do not check for CONFIG_E500 and rather set e500 as last fallback value when no other mpc85xx cpu matches. Signed-off-by: Pali Rohár <pali@kernel.org>
2022-12-22net: don't memcpy to NULLHeinrich Schuchardt1-1/+1
In ndisc_receive() 7 bytes are copied from a buffer of size 6 to NULL. net_nd_packet_mac is a pointer. If it is NULL, we should set it to the address of the buffer with the MAC address. Addresses-Coverity-ID: 430974 ("Out-of-bounds access") Fixes: c6610e1d90ea ("net: ipv6: Add Neighbor Discovery Protocol (NDP)") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com>
2022-12-22net: ipv6: Add missing break into IPv6 protocol handlerViacheslav Mitrofanov1-0/+1
IPv6 protocol handler is not terminated with a break statment. It can lead to running unexpected code. Signed-off-by: Viacheslav Mitrofanov <v.v.mitrofanov@yadro.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2022-12-22spl: Kconfig: Fix SPL_OPTEE_IMAGE dependencyJagan Teki1-0/+1
fdt_addr will build as part of SPL_LOAD_FIT or SPL_LOAD_FIT_FULL which is indeed required to build optee image support in SPL. common/spl/spl.c: In function ‘jump_to_image_optee’: common/spl/spl.c:220:46: error: ‘struct spl_image_info’ has no member named ‘fdt_addr’ 220 | spl_optee_entry(NULL, NULL, spl_image->fdt_addr, Fix the dependency support. Signed-off-by: Jagan Teki <jagan@edgeble.ai>
2022-12-22CI: Reduce aarch64 catchall job matchesTom Rini1-3/+5
The aarch64 catch-all job is getting close to the hard time limit in Azure for the free tier. Move i.MX9 boards to the i.MX8 job and move amlogic entirely to its own job. This brings us down from 85 boards to 51 boards and so should be safe for a while. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-20Merge tag 'efi-2023-01-rc5' of ↵WIP/20Dec2022Tom Rini11-84/+225
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2023-01-rc5 UEFI: * Improve parameter checking in efi_get_next_variable_name_mem() * Fix a bugs in management of security database via the eficonfig command Other: * Allow sound command to play multiple sounds
2022-12-20Merge tag 'tpm-20122022' of https://source.denx.de/u-boot/custodians/u-boot-tpmTom Rini1-0/+1
fTPM privileged login
2022-12-20eficonfig: EFI_VARIABLE_APPEND_WRITE is not set for null keyMasahisa Kojima1-2/+36
The signed null key with authenticated header is used to clear the PK, KEK, db and dbx. When CONFIG_EFI_MM_COMM_TEE is enabled (StMM and OP-TEE based RPMB storage is used as the EFI variable storage), clearing KEK, db and dbx by enrolling a signed null key does not work as expected if EFI_VARIABLE_APPEND_WRITE attritube is set. This commit checks the selected file is null key, then EFI_VARIABLE_APPEND_WRITE attibute will not be used for the null key. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-12-20efi_selftest: conformance test for GetNextVariableNameHeinrich Schuchardt1-0/+35
Test that GetNextVariableName() checks the parameters. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-12-20efi_loader: fix efi_get_next_variable_name_mem()Heinrich Schuchardt2-4/+5
The VariableNameSize parameter is in bytes but u16_strnlen() counts u16. Fix the parameter check for null termination. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-12-20eficonfig: avoid SetVariable between GetNextVariableName callsMasahisa Kojima1-16/+38
The current code calls efi_set_variable_int() to delete the invalid boot option between calls to efi_get_next_variable_name_int(), it may produce unpredictable results. This commit moves removal of the invalid boot option outside of the efi_get_next_variable_name_int() calls. EFI_NOT_FOUND returned from efi_get_next_variable_name_int() indicates we retrieved all EFI variables, it should be treated as EFI_SUCEESS. To address the checkpatch warning of too many leading tabs, combine two if statement into one. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-12-20eficonfig: carve out efi_get_next_variable_name_int callsMasahisa Kojima3-47/+51
To retrieve the EFI variable name by efi_get_next_variable_name_int(), the sequence of alloc -> efi_get_next_variable_name_int -> realloc -> efi_get_next_variable_name_int is required. In current code, this sequence repeatedly appears in the several functions. It should be curved out a common function. This commit also fixes the missing free() of var_name16 in eficonfig_delete_invalid_boot_option(). Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-12-20test: add unit test for u16_strnlen()Heinrich Schuchardt1-0/+11
Add the missing unit test. It can be executed with: ut unicode u16_strnlen Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-12-20doc: correct heading level in printenv man-pageHeinrich Schuchardt1-1/+1
The 'Configuration' heading should be on level 2, not on level 1. Fixes: eaa268589e9c ("doc: man-page for the printenv command") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-12-20cmd: allow sound command to play multiple soundsHeinrich Schuchardt2-15/+49
Currently the sound command accepts only one value each for duration and frequency. Allowing more duration and frequency arguments enables playing a tune. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-20tpm2: ftpm: open session with privileged ree loginEtienne Carriere1-0/+1
Opens the fTPM session with TEE_LOGIN_REE_KERNEL as fTPM may restrict access to that login when Linux based OS is running as applications are expected to got through the Linux TPMv2 driver. Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2022-12-19Prepare v2023.01-rc4v2023.01-rc4Tom Rini2-2/+2
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-19Merge tag 'u-boot-rockchip-20221219' of ↵Tom Rini19-208/+549
https://source.denx.de/u-boot/custodians/u-boot-rockchip - Only call binman when TPL available; - rk3128 DTS fix; - Fix GPT table corruption for rk3399 puma ; - Fix i2c for rk3399 Pinebookpro; - Enable UEFI capsule update for RockPi4;
2022-12-19rockpi4: capsule: Enable UEFI capsule update on RockPi4 boardsSughosh Ganu2-0/+16
Enable the UEFI capsule update functionality on the RockPi4B and RockPi4C boards. Support is being enabled for updating the idbloader and u-boot firmware images residing on GPT partitioned uSD card storage device. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19rockpi4: board: Add firmware image information for capsule updatesSughosh Ganu3-1/+71
Add information that will be needed for enabling the UEFI capsule update feature on the RockPi4 boards. With the feature enabled, it would be possible to update the idbloader and u-boot.itb images on the RockPi4B and RockPi4C variants. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19rockchip: capsule: Add functions for supporting capsule updatesSughosh Ganu2-0/+154
Add functions needed to support the UEFI capsule update feature on rockchip boards. Currently, the feature is being enabled on the RockPi4 boards with firmware images residing on GPT partitioned storage media. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19phy: rockchip: handle clock without enable functionJohn Keeping1-1/+1
If a clock doesn't supply the enable hook, clk_enable() will return -ENOSYS. In this case the clock is always enabled so there is no error and the phy initialisation should continue. Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19rockchip: Pinebook Pro: Do not initialize i2c before relocationMichal Suchanek1-8/+0
The i2c locks up when initialized before relocation, and it stays broken in Linux as well breaking the ability to boot Linux. The i2c bus and pmic was not actually used in pre-reloc before commit ad607512f575 ("power: pmic: rk8xx: Support sysreset shutdown method") The cause is not known. This is board-specific, other boards that do not add the option to include the i2c bus in pre-reloc DT are not affected. Signed-off-by: Michal Suchanek <msuchanek@suse.de> Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19rockchip: puma: fix GPT table corruption when saving U-Boot environmentQuentin Schulz2-1/+2
The GPT table is taking the first 34 sectors, which amounts to 0x4400 bytes. Saving the environment below this address in storage will corrupt the GPT table. While technically the table ends at 0x4400, some tools (e.g. bmaptool) are rounding everything to the logical block size (0x1000), so it is safer to make it point to 0x5000 so that the environment could still persist when flashing a sparse image with bmaptool or similar tools. Obviously, the default 0x4000 environment size does not work anymore, so let's set it to 0x3000 so it does fill the gap between the GPT table (rounded to 0x1000) and the start of the idbloader.img. Fixes: 56f580d3eb8d ("rockchip: dts: rk3399-puma: put environment (in MMC/SD configurations) before SPL") Cc: Quentin Schulz <foss+uboot@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19arm: dts: rockchip: enable ums/rockusb command for ROCK Pi 4FUKAUMI Naoki2-0/+6
this patch add USB mass storage function and Rockusb function for Radxa ROCK Pi 4 series. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19configs:rockchip:roc-rk3399-pc:Enable more configsManoj Sai1-0/+8
This patch enables the following: 1) use preboot configuration to enable usb devices. 2) Enable USB configs so keyboards and other USB devices work, update the number of ports of the usb root hub. - with this addition the updated USB device Tree: 1 Hub (12 Mb/s, 0mA) U-Boot Root Hub 1 Hub (12 Mb/s, 0mA) | U-Boot Root Hub | +-2 Hub (12 Mb/s, 100mA) USB 2.0 Hub [MTT] 1 Hub (5 Gb/s, 0mA) U-Boot XHCI Host Controller 3) enable crypto RNG support. 4) Change SPI speed and frequency: - increase the maximum SPI slave device speed, SPI flash max frequency for the environment from 10Mhz to 30MHz. - performance stats for speed update from 10MHz to 30MHz: with 10Mhz speed update: => sf update 0x300000 0x800000 0x400000 4194304 bytes written, 0 bytes skipped in 36.819s, speed 119837 B/s with 30Mhz speed update: => sf update 0x300000 0x800000 0x400000 4194304 bytes written, 0 bytes skipped in 20.319s, speed 220752 B/s Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com> Signed-off-by: Da Xue <da.xue@libretech.co> Signed-off-by: dsx724 <da@lessconfused.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19arm: dts: rockchip: rk3128: fix clocks, compatible and physJohan Jonker1-27/+19
Fix rk3128 clocks, compatible and phys, so that they match the bindings. Signed-off-by: Johan Jonker <jbx6244@gmail.com>
2022-12-19arm: dts: rockchip: rk3128: fix DT node namesJohan Jonker2-34/+33
The rk3128 DT node names should be generic. Rename them to the pattern defined in the DT bindings. Signed-off-by: Johan Jonker <jbx6244@gmail.com>
2022-12-19arm: dts: rockchip: move all rk3128 u-boot specific properties in separate ↵Johan Jonker4-14/+31
dtsi files Move all rk3128 u-boot specific properties in separate dtsi files. Sort emmc node. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19arm: dts: rockchip: rk3128: bulk convert gpios to their constant counterpartsJohan Jonker2-45/+45
Bulk convert rk3128 DT gpios to their constant counterparts. sed -i -f script.sed rk3128.dtsi sed -i -f script.sed rk3128-evb.dts ================================ /rockchip,pins *=/bcheck b # to end of script :append-next-line N :check /^[^;]*$/bappend-next-line s/<RK_GPIO\([0-9]\) /<\1 /g s/<\([^ ][^ ]* *\)0 /<\1RK_PA0 /g s/<\([^ ][^ ]* *\)1 /<\1RK_PA1 /g s/<\([^ ][^ ]* *\)2 /<\1RK_PA2 /g s/<\([^ ][^ ]* *\)3 /<\1RK_PA3 /g s/<\([^ ][^ ]* *\)4 /<\1RK_PA4 /g s/<\([^ ][^ ]* *\)5 /<\1RK_PA5 /g s/<\([^ ][^ ]* *\)6 /<\1RK_PA6 /g s/<\([^ ][^ ]* *\)7 /<\1RK_PA7 /g s/<\([^ ][^ ]* *\)8 /<\1RK_PB0 /g s/<\([^ ][^ ]* *\)9 /<\1RK_PB1 /g s/<\([^ ][^ ]* *\)10 /<\1RK_PB2 /g s/<\([^ ][^ ]* *\)11 /<\1RK_PB3 /g s/<\([^ ][^ ]* *\)12 /<\1RK_PB4 /g s/<\([^ ][^ ]* *\)13 /<\1RK_PB5 /g s/<\([^ ][^ ]* *\)14 /<\1RK_PB6 /g s/<\([^ ][^ ]* *\)15 /<\1RK_PB7 /g s/<\([^ ][^ ]* *\)16 /<\1RK_PC0 /g s/<\([^ ][^ ]* *\)17 /<\1RK_PC1 /g s/<\([^ ][^ ]* *\)18 /<\1RK_PC2 /g s/<\([^ ][^ ]* *\)19 /<\1RK_PC3 /g s/<\([^ ][^ ]* *\)20 /<\1RK_PC4 /g s/<\([^ ][^ ]* *\)21 /<\1RK_PC5 /g s/<\([^ ][^ ]* *\)22 /<\1RK_PC6 /g s/<\([^ ][^ ]* *\)23 /<\1RK_PC7 /g s/<\([^ ][^ ]* *\)24 /<\1RK_PD0 /g s/<\([^ ][^ ]* *\)25 /<\1RK_PD1 /g s/<\([^ ][^ ]* *\)26 /<\1RK_PD2 /g s/<\([^ ][^ ]* *\)27 /<\1RK_PD3 /g s/<\([^ ][^ ]* *\)28 /<\1RK_PD4 /g s/<\([^ ][^ ]* *\)29 /<\1RK_PD5 /g s/<\([^ ][^ ]* *\)30 /<\1RK_PD6 /g s/<\([^ ][^ ]* *\)31 /<\1RK_PD7 /g s/<\([^ ][^ ]* *[^ ][^ ]* *\)0 /<\1RK_FUNC_GPIO /g s/<\([^ ][^ ]* *[^ ][^ ]* *\)RK_FUNC_\([1-9]\) /<\1\2 /g Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19rockchip: rk3128-cru: sync the clock dt-binding header from LinuxJohan Jonker3-76/+160
In order to update the DT for rk3128 sync the clock dt-binding header. This is the state as of v6.0 in Linux. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19rockchip: enable fdt overlays for ROCK Pi 4 seriesFUKAUMI Naoki2-0/+2
add CONFIG_OF_LIBFDT_OVERLAY=y to support fdt overlays. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2022-12-19rockchip: Only call binman when TPL availableKever Yang1-1/+1
Rockchip platform use TPL to do the DRAM initialize for all the SoCs, if TPL is not available, means no available DRAM init program, and the u-boot-rockchip.bin is not functionable. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Change-Id: I2299f1eddce5aa7d5fb1a3fb4d8aeaa995b397fa
2022-12-18Makefile: With BINMAN_ALLOW_MISSING=1 don't error on missingTom Rini1-1/+1
When the user builds with BINMAN_ALLOW_MISSING=1 they're explicitly setting the flag to allow for additional binaries to be missing and so have acknowledged the output might not work. In this case we want to default to not passing a non-zero exit code. Cc: Simon Glass <sjg@chromium.org> Reported-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-18Merge tag 'efi-2023-01-rc4' of ↵WIP/18Dec2022Tom Rini9-33/+33
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2023-01-rc4 Documentation: * Fix htmldoc build dependency UEFI: * Adjust EBBR version for compatibility table
2022-12-18Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxiTom Rini168-184/+26
This cleans up each board's defconfig, and fixes the serial console on some Olimex board. Also we lose another legacy config variable. The rest are minor cleanups, that actually shouldn't change anything in the build. Passed the gitlab CI, plus briefly tested on Pine64-LTS, LicheePi Nano, and BananaPi M1.
2022-12-17doc: update Sphinx requirements for certifiHeinrich Schuchardt1-1/+1
Upgrade to version 2022.12.7. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-12-17efi: adjust ebbr to v2.1 in conformance profileVincent Stehlé5-14/+14
The EFI Conformance Profile Table entry for EBBR appears in v2.1.0 of the EBBR specification[1]. Update naming accordingly. While at it, update the EBBR version referenced in the documentation. [1]: https://github.com/ARM-software/ebbr/releases/tag/v2.1.0 Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-12-17doc: fix typosMaxim Cournoyer3-18/+18
Fix a few typos spot during a first read of the contribution process. Signed-off-by: Maxim Cournoyer <maxim.cournoyer@savoirfairelinux.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-12-15Merge https://source.denx.de/u-boot/custodians/u-boot-x86WIP/15Dec2022Tom Rini11-12/+12
- Adjust CONFIG_TEXT_BASE for BayTrail based platforms - 2 cosmetic issue fixes
2022-12-14sunxi: board: annotate #endif linesAndre Przywara3-12/+11
The legacy Allwinner code is cluttered with #ifdef's, some of them even nested, which makes the code hard to read and error prone. Eventually we will get rid of most of them, but for now let's at least annotate the #endif lines with the corresponding symbol the bracket started with. Reviewed-by: Samuel Holland <samuel@sholland.org> Tested-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-12-14sunxi: remove bogus mmc_pinmux_setup() prototypeAndre Przywara1-4/+0
Since all callers of mmc_pinmux_setup() are located after the definition of that function, there is no need for a forward declaration (anymore?). Remove the prototype along with its #ifdef guards. Reviewed-by: Samuel Holland <samuel@sholland.org> Tested-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-12-14sunxi: remove unused CONFIG_MMC_SUNXI_SLOTAndre Przywara3-6/+7
There is a CONFIG_MMC_SUNXI_SLOT definition in our sunxi_common.h config header, which was used to note the first MMC controller to initialise. The definition in that header was always set to 0, with no easy way of overriding this, and certainly none of the existing boards made any use of that (non-)feature. Remove that definition and replace it with a constant 0 in the only user, in board.c. It turns out that this is safe, as this is only used in the SPL, and the BROM also unconditionally initialises MMC0. This also removes the last legacy config symbol with SUN*I in it from the whitelist. Reviewed-by: Samuel Holland <samuel@sholland.org> Tested-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-12-14x86: cosmetic: Fix a typo in the reserve_arch() commentsBin Meng1-1/+1
It should be fsp_continue(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-14x86: som-db5800-som-6867: Adjust CONFIG_TEXT_BASEBin Meng1-1/+1
At present U-Boot no longer builds as a complete rom for som-db5800-som-6867. BINMAN .binman_stamp Wrote map file './rom.map' to show errors binman: Section '/binman/rom': contents size 0x80302c (8400940) exceeds section size 0x800000 (8388608) Checking rom.map we see 'intel-vga' section is overlapped with other sections: <none> fff00000 0009f7c8 u-boot-with-ucode-ptr <none> fff90000 00010000 intel-vga <none> fff9f7c8 00001aae u-boot-dtb-with-ucode Let's adjust CONFIG_TEXT_BASE to allow more space for U-Boot codes. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2022-12-14x86: dfi-bt700: Adjust CONFIG_TEXT_BASEBin Meng2-2/+2
At present U-Boot no longer builds as a complete rom for all the configs of dfi-bt700. BINMAN .binman_stamp Wrote map file './rom.map' to show errors binman: Section '/binman/rom': contents size 0x80e836 (8448054) exceeds section size 0x800000 (8388608) Checking rom.map we see 'intel-vga' section is overlapped with other sections: <none> fff00000 000aac90 u-boot-with-ucode-ptr <none> fffa0000 00010000 intel-vga <none> fffaac90 00001df0 u-boot-dtb-with-ucode <none> fffaca80 00019800 u-boot-ucode Let's adjust CONFIG_TEXT_BASE to allow more space for U-Boot codes. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
generated by cgit v1.1 at 2024-08-05 16:31:38 +0000