aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-11-19dm: usb: Avoid time delays in sandbox testsSimon Glass3-1/+14
Currently the USB tests take around two seconds to run. Remove these unnecessary time delays so that the tests run quickly. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19sandbox: Add a way to skip time delaysSimon Glass3-1/+37
Some tests are slow due to delays which are unnecessary on sandbox. The worst offender is USB where we lose two seconds. Add a way to disable time delays. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19sandbox: cros_ec: fix uninitialized use of lenDaniel Schwierzeck1-0/+1
Building with gcc-5.2 raises this warning: drivers/misc/cros_ec_sandbox.c: In function cros_ec_sandbox_packet: drivers/misc/cros_ec_sandbox.c:483:5: warning: len may be used uninitialized in this function [-Wmaybe-uninitialized] if (len < 0) ^ If the function process_cmd() is called with req_hdr->command == EC_CMD_ENTERING_MODE, the value of len will be returned uninitialized. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-11-19x86: qemu: Convert to use driver model keyboardBin Meng3-1/+3
Convert to use driver model keyboard on QEMU. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-11-19x86: crownbay: Convert to use driver model keyboardBin Meng2-1/+2
Convert to use driver model keyboard on Intel Crown Bay. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-11-19input: Ban digit numbers if 'Num Lock' is not onBin Meng1-0/+6
When 'Num Lock' is not on, we should not send these digit numbers (0-9 and dot) to the output buffer. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-11-19input: Change LED state bits to conform i8042 compatible keyboardBin Meng2-5/+5
When sending LED update command to an i8042 compatible keyboard, bit1 is 'Num Lock' and bit2 is 'Caps Lock' in the data byte. But input library defines bit1 as 'Caps Lock' and bit2 as 'Num Lock'. This causes a wrong LED to be set on an i8042 compatible keyboard. Change the LED state bits to be i8042 compatible, and change the keyboard flags as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-11-19input: Call keyboard's update_leds() method when the LEDs changeBin Meng1-0/+15
We should request keyboard to turn on/off its LED when detecting any changes on the LEDs. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Minor changes to allow this to build without CONFIG_DM_KEYBOARD: Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19input: Save keyboard's LED state to correct placeBin Meng1-1/+1
Currently keyboard's LED state is wrongly saved to config->leds in process_modifier(). It should really be config->flags. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-11-19input: Convert 'keyboard' driver to use input librarySimon Glass2-252/+43
This has duplicated scan code tables and logic. We can use the input library to implement most of the features here. This needs testing. The only supported board appears to be TQM5200. Unfortunately no maintainer is listed for this board. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19video: input: Clean up after i8042 conversionSimon Glass2-33/+16
Now that i8042 uses driver model, adjust other mentions of it and remove old code that is no-longer used. Update the README and unify the keyboard text into one place. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-19i8042: Handle a duplicate power-on-reset responseSimon Glass1-2/+19
Sometimes we seem to get 0xaa twice which causes the config read to fail. This causes chromebook_link to fail to set up the keyboard. Add a check for this and read the config again when detected. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-19input: Convert i8042 to driver modelSimon Glass3-41/+76
Adjust this driver to support driver model. The only users are x86 boards so this should be safe. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-19Drop CONFIG_ISA_KEYBOARDSimon Glass4-19/+0
This option is mentioned but does not do anything. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-19x86: Add an i8042 device for boards that have itSimon Glass10-8/+29
Some boards have an i8042 device. Enable the driver for all x86 boards, and add a device tree node for those which may have this keyboard. Also adjust the configuration so that i8042 is always separate from the VGA, and rename the stdin driver accordingly. With this commit the keyboard will not work, but it is fixed in the next commit. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-19input: Add a Kconfig option for the i8042 keyboardSimon Glass1-0/+10
Add a new option CONFIG_I8042_KEYB which will replace the current CONFIG_I8042_KBD. This new name fits better with existing drivers. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-19input: i8042: Convert to use the input librarySimon Glass1-424/+69
At present the i8042 driver has its own logic and keymaps. In an effort to unify the code, move it over to use the input library. This changes most of the keycode-processing logic since it is now in that library. The main responsibilities of the driver are now to handle the LEDs, deal with the PS/2 extended keycodes and initialise the the keyboard. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-19input: Allow updating of keyboard LEDsSimon Glass2-1/+22
Add a function which returns a new keyboard LED value when the LEDs need updating. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-19input: Handle caps lockSimon Glass1-5/+8
When caps lock is enabled we should convert lower case to upper case. Add this to the input key processing so that caps lock works correctly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-19input: Adjust structure of code in process_modifier()Simon Glass1-13/+14
Move all the '!release' code into one block so that it is clear that it only applies on key release. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-19input: Support the German keymapSimon Glass5-16/+102
Add support for the German keymap, taken from i8042.c. This can be selected when the input library it initialised. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-19sandbox: add a sandbox timer and basic testThomas Chou10-0/+106
Add a sandbox timer which get time from host os and a basic test. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-11-19common/board_f.c: move mark_bootstage after arch_cpu_init_dmThomas Chou1-1/+1
As mark_bootstage() uses timer, it should go after driver model is initialized. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-11-19input: Allow repeat filtering to be disabledSimon Glass2-2/+26
Generally the input library handles processing of a list of scanned keys. Repeated keys need to be generated based on a timer in this case, since all that is provided is a list of keys current depressed. Keyboards which do their own scanning will resend codes when they want to inject a repeating key. Provide a function which tells the input library to accept repeating keys and not to try to second-guess the caller. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-19input: Add a function to add a keycode to the existing setSimon Glass2-4/+62
Most keyboards can be scanned to produce a list of the keycodes which are depressed. With the i8042 keyboard this scanning is done internally and only the processed results are returned. In this case, when a key is pressed, a 'make' code is sent. When the key is released a 'break' code is sent. This means that the driver needs to keep track of which keys are pressed. It also means that any protocol error can lead to stuck keys. In order to support this type of keyboard, add a function when can be used to provide a single keycode and either add it to the list of what is pressed or remove it from the list. Then the normal input_send_keycodes() function can be used to actually do the decoding work. Add debugging to display the ASCII characters written to the input queue also. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-19input: Add a few more keyboard keycodesSimon Glass1-3/+3
The slash and * are missing from the keycode tables. Add these so that these keypad keys can be used. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19input: Correct keycode for Ctrl-YSimon Glass1-1/+1
This code is currently incorrect, perhaps due to a typo. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19i8042: Adjust keyboard init to assume successSimon Glass1-10/+9
Modify i8042_kbd_init() so that the normal pass is sucessful init and failure exits early. This will make the code easier to extend and is easier to read. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-19i8042: Adjust kbd_reset() to collect all failuresSimon Glass1-5/+8
Rather than lots of 'return' statements, use goto to a single return. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-19i8042: Use functions to handle register accessSimon Glass1-31/+44
At present the register access in kbd_reset() is quite primitive. This makes it hard to follow. Create functions to read and write data, both to a single register, and via the command/data approach. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-on: Intel Crown Bay and QEMU Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-19video: Drop unused console functionsSimon Glass7-87/+9
CONFIG_CONSOLE_CURSOR, CONFIG_SYS_CONSOLE_BLINK_COUNT and CONFIG_CONSOLE_TIME are not used by any board. The implementation is not great and stands in the way of a refactor of i8042. Drop these for now. They can be re-introduced quite easily later, perhaps with driver-model real-time-clock (RTC) support. When reintroducing, it might be useful to make a few changes: - Blink time would be more useful than blink count - The confusing #ifdefs should be avoided - The time functions should support driver model - It would be best keyed off console_tstc() or some similar idle loop rather than a particular input driver (i8042 in this case) Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-19dm: cros_ec: Convert cros_ec keyboard driver to driver modelSimon Glass4-95/+62
Adjust the cros_ec keyboard driver to support driver model. Make this the default for all Exynos boards so that those that use a keyboard will build correctly with this driver. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19dm: tegra: Convert keyboard driver to driver modelSimon Glass4-134/+112
Adjust the tegra keyboard driver to support driver model, using the new uclass. Make this the default for all Tegra boards so that those that use a keyboard will build correctly with this driver. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19dm: stdio: Plumb in the new keyboard uclassSimon Glass1-1/+30
When driver model is used for keyboards we must scan the available keyboards and register them with stdio. Add code to do this. At some point (once LCD/video is converted) we should be able to convert stdio to driver model and avoid these dual data structures. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-19cros_ec: Use udevice instead of cros_ec_dev for keyboard functionsSimon Glass3-9/+13
In preparation for converting the cros_ec keyboard driver to driver model, adjust the cros_ec functions it will use to use a normal struct udevice. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19input: Add the keycode translation tables separatelySimon Glass5-9/+30
Require the caller to add the keycode translation tables separately so that it can select which ones to use. In a later patch we will add the option to add German tables. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-19input: Return -ENOSPC when there is not spaceSimon Glass1-1/+2
Return a useful error instead of -1 when something goes wrong. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-19input: Add a device pointer to the input configSimon Glass1-0/+1
The read_keys() method in input is passed a struct input_config. Add a device pointer there so that we can find out the device that is referred to with driver model. Once all drivers are converted we can update the input structure to use driver model instead. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-19dm: input: Create a keyboard uclassSimon Glass5-6/+181
Add a uclass for keyboard input, mirroring the existing stdio methods. This is enabled by a new CONFIG_DM_KEYBOARD option. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-19dm: usb: Add support for USB keyboards with driver modelSimon Glass3-8/+57
Switch USB keyboards over to use driver model instead of scanning with the horrible usb_get_dev_index() function. This involves creating a new uclass for keyboards, although so far there is no API. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-11-19rockchip: Turn on CONFIG_DEBUG_UART_NS16550 in defconfigsAriel D'Alessandro2-0/+2
No UART driver was specified in defconfig, thus DEBUG_UART_ALTERA_JTAGUART was incorrectly selected by default since commit 220e8021af96741bd7149ca9895e1f0c8a38d0bb added a new Altera UART driver. Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar> Acked-by: Simon Glass <sjg@chromium.org>
2015-11-19Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini8-121/+25
2015-11-19Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblazeTom Rini17-39/+638
2015-11-19Merge branch 'master' of git://www.denx.de/git/u-boot-microblazeTom Rini5-43/+73
2015-11-19common: mii: Do not allow to exceed max phy limitMichal Simek1-0/+5
Phy can have addresses 0-31. Check this boundary to ensure that user can't call commands on phy address 32 and more. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-19zynq: sdhci: Define max clock by macroMichal Simek4-1/+6
zc1571 with silicon can operate on 200MHz maximum frequency. Setup this frequency by default and fix setting for ep108. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-19net: zynq: Fix MDC setting for zynqMichal Simek1-1/+1
Based on spec: "MDC must not exceed 2.5 MHz (MDC is only active during MDIO read and write operations)" Zynq is running on 111MHz. Current setting is 32 which is 111/32=3.47 which is above of 2.5MHz. Using 48 divider will give us correct setting according spec (111/48=2.31). Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-11-19net: zynq: Remove unused MDCCLKDIV2 macroMichal Simek1-1/+0
Driver cleanup. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-11-19net: zynq: Fix mdc clock division setting for 100Mbit/sMichal Simek1-2/+2
Using set and clear macro is incorrect because it is not overwritting origin mdc clock division setup. For example origin setup is 8(0b001) and new setup is 64(0b100) which means 0b101 is setup which is 96 divider. Using writel to rewrite all setting like for 1000Mbit/s case. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-11-19net: zynq: Wait till packet is sentMichal Simek1-1/+32
Wait till BD is processed to ensure that packet was sent successfully. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit v1.1 at 2024-08-14 01:16:49 +0000