aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-04-22arm: apple: Point stdout-path to framebuffer when keyboard presentWIP/2022-04-22-assorted-updatesMark Kettenis2-0/+41
Unless you have a spare Apple Silicon machine, getting access to the serial port on Apple Silicon machines requires special hardware. Given that most machines come with a built-in screen the framebuffer is likely to be the most convenient output device for most users. While U-Boot will output to both serial and framebuffer, OSes might not. Therefore set stdout-path to point at /chosen/framebuffer when a keyboard is connected to the machine. This behaviour can be overridden by setting the "stdout" variable in the U-Boot environment. I addition to that keep the serial console as the default when running under the m1n1 hypervisor. The m1n1 hypervisor virtualizes the serial port such that it can be easily accessed from any other machine with a USB port. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Janne Grunau <j@jannau.net> Tested-by: Janne Grunau <j@jannau.net>
2022-04-22arm: apple: Don't clear framebufferMark Kettenis1-0/+2
Enable CONFIG_NO_FB_CLEAR to preserve the Asahi logo. Since that logo is drawn on a black background also enable CONFIG_SYS_WHITE_ON_BLACK such that text printed by U-Boot is still visible. Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2022-04-22Allow colon in PXE bootfile URLsLyle Franklin1-2/+7
- U-boot's PXE flow supports prefixing your bootfile name with an IP address to fetch from a server other than the DHCP server, e.g. `hostIPaddr:bootfilename`: https://github.com/u-boot/u-boot/commit/a93907c43f847f076dd0e34ee3b69b5e8e6d0d29 - However, this breaks bootfile paths which contain a colon, e.g. `f0:ad:4e:10:1b:87/7/pxelinux.cfg/default` - This patch checks whether the `hostIPaddr` prefix is a valid IP address before overriding the serverIP otherwise the whole bootfile path is preserved Signed-off-by: Lyle Franklin <lylejfranklin@gmail.com>
2022-04-22fdt: Add -q option to fdt addr for distro_bootcmdPeter Hoyes2-10/+26
distro_bootcmd uses this construct a few times to test $fdt_addr_r, and fall back on $fdtcontroladdr if not set/invalid: if fdt addr ${fdt_addr_r}; then ... else ... fi If the `fdt addr` test fails, it prints the following message on the console, suggesting there is an error when there is not: libfdt fdt_check_header(): FDT_ERR_BADMAGIC To remove this potentially confusing error message, this patch adds -q as a 'quiet' option for fdt addr, and uses this flag in config_distro_bootcmd.h Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
2022-04-22cmd: adc: Add support for storing ADC result in env variableMarek Vasut1-4/+14
Add the ability to save ADC conversion result in an environment variable. This is useful for further arbitrary processing by the U-Boot scripts. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2022-04-22fdt: Fix TPL SEPARATE_BSS check when locating DTBAndrew Abbott1-1/+1
Commit 690af71850149bf242502f688eca80fb302d1f76 changed this condition from an explicit IS_ENABLED(CONFIG_SPL_SEPARATE_BSS) to CONFIG_IS_ENABLED(SEPARATE_BSS) The documentation for CONFIG_IS_ENABLED() in include/linux/kconfig.h implies that we will get the correct behaviour, but the actual behaviour differs such that this condition is now always false. This stopped TPL being able to load the device tree blob at least on the ROCKPro64 board (RK3399 SoC), since the wrong device tree location was chosen. The issues causing this behaviour with CONFIG_IS_ENABLED() are: 1. The documentation implies that CONFIG_SPL_BUILD => CONFIG_SPL_<option> is considered before the TPL equivalent. Actually, the TPL options have higher priority - see definition of _CONFIG_PREFIX. 2. The documentation implies a fallthrough, eg. if CONFIG_SPL_BUILD is defined but the CONFIG_SPL_<option> is not, then it will proceed to check if CONFIG_TPL_BUILD Actually, if CONFIG_TPL_BUILD is defined, then it stops there and CONFIG_SPL_BUILD is not considered - see definition of _CONFIG_PREFIX. During TPL build, at least for the ROCKPro64, both CONFIG_TPL_BUILD and CONFIG_SPL_BUILD are defined, but because of the above, only TPL options are considered. Since there is no CONFIG_TPL_SEPARATE_BSS, this fails. Fixes: 690af71850 ("fdt: Correct condition for SEPARATE_BSS") Signed-off-by: Andrew Abbott <andrew@mirx.dev>
2022-04-22Merge https://gitlab.denx.de/u-boot/custodians/u-boot-pmicWIP/22Apr2022Tom Rini1-1/+1
2022-04-22Merge https://gitlab.denx.de/u-boot/custodians/u-boot-usbTom Rini4-3/+23
2022-04-22configs: Resync with savedefconfigTom Rini84-125/+1
Resync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-22power-domain: Fix use of uninitialized value in dev_power_domain_ctrlSean Anderson1-1/+1
If dev_count_phandle_with_args returns 0 or another error, then pd will never have been initialized by power_domain_get_by_index. Avoid comparing against pd.dev in this situation. Fixes: 3e4fcfa4bc ("power-domain: fix hang in endless loop on i.MX8") Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-04-22Merge https://gitlab.denx.de/u-boot/custodians/u-boot-watchdogTom Rini4-0/+137
- device-tree-bindings: watchdog: document common properties (Philippe) - nuvoton: Add support for Nuvoton (Jim)
2022-04-22Merge tag 'u-boot-imx-20220422' of ↵Tom Rini184-3023/+6016
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20220422 ------------------- - Switch to DM_SERIAL - Drop MMCROOT - several cleanup CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/11815
2022-04-22Add support for TP-Link UE200 dongleOleksii Titov1-0/+2
Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Oleksii Titov <ootitov@gmail.com>
2022-04-22usb: dwc3: Add support for usb3-phy PHY configurationMichal Simek1-0/+18
When usb3-phy label is found, PHY driver is called and serdes line is initialized. This is preparation for serdes/psgtr driver to configure GT lines based on description in DT. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-04-22generic-phy: s/CONFIG_PHY/CONFIG_IS_ENABLED(PHY)/Michal Simek1-1/+1
Allow to disable PHY driver in SPL because it checks the CONFIG_SPL_PHY variable for SPL builds. The same change was done for usb by commit fd09c205fc57 ("usb: s/CONFIG_DM_USB/CONFIG_IS_ENABLED(DM_USB)/"). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2022-04-22usb: gadget: ci: Make various ops constAdam Ford1-2/+2
ci_udc_ops and ci_ep_ops do not change their operations. Mark them as const. Signed-off-by: Adam Ford <aford173@gmail.com>
2022-04-22wdt: nuvoton: Add support for NuvotonJim Liu3-0/+125
Add watchdog controller driver for NPCM7xx/npcm8xx the wdt design of npcm750 and npcm845 is the same. so the driver can work on npcm750 and npcm845. about npcm845 wdt dtsi i will followed kernel dts name to use nuvoton,npcm750-wdt. Signed-off-by: Jim Liu <JJLIU0@nuvoton.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-04-22doc: device-tree-bindings: watchdog: document common propertiesPhilippe Reynes1-0/+12
Adds simple documentation about common properties for watchdog in the device tree. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-04-21Merge branch '2022-04-21-further-cleanups'Tom Rini283-524/+374
- Fix SPL_SYS_MALLOC_SIMPLE and non-SPL_FRAMEWORK boards (a large number of PowerPC platforms) - Remove duplication of crc16 functionality - Migrate COUNTER_FREQUENCY to CONFIG_COUNTER_FREQUENCY and have it in Kconfig
2022-04-21ARM: imx: imx8mn-evk: change environment address variablesHeiko Thiery3-6/+14
Currently the space between kernel_addr_r and the fdt_addr_r is only 32MB. To have enough space to load kernel images bigger than 32MB change the variables to a feasible value. The new environment variables layout is based on the scheme from "include/configs/ti_armv7_common.h". The CONFIG_SYS_LOAD_ADDR value is set to 0x42000000. With that we have the same value as for the kernel_addr_r. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2022-04-21configs: imx: drop IMX_FEC_BASEPeng Fan17-18/+0
IMX_FEC_BASE is not used in these boards, so drop it. Reviewed-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-21imx8mm-cl-iot-gate: Remove redundant board_fix_fdt()Ying-Chun Liu (PaulLiu)1-5/+0
In arch/arm/mach-imx/imx8m/soc.c there's an implementation of board_fix_fdt() introduced by commit 35bb60787b88. Remove the redundant one to avoid failed to build from source when enabling CONFIG_OF_BOARD_FIXUP. Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: uboot-imx <uboot-imx@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-04-21arm: set cntfrq_el0 if CONFIG_COUNTER_FREQUENCY is validWIP/2022-04-21-further-cleanupsPeng Fan9-13/+13
Since COUNTER_FREQUENCY is obselete, so set cntfrq_el0 if CONFIG_COUNTER_FREQUENCY is valid Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
2022-04-21include/configs: drop COUNTER_FREQUENCYPeng Fan69-155/+2
Since we have CONFIG_COUNTER_FREQUENCY enabled, no need COUNTER_FREQUENCY Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-21configs: set CONFIG_COUNTER_FREQUENCYPeng Fan184-4/+184
Set CONFIG_COUNTER_FREQUENCY according to COUNTER_FREQUENCY in config header file. Signed-off-by: Peng Fan <peng.fan@nxp.com> [trini: Re-run migration]
2022-04-21arch: arm: Kconfig: set default COUNTER_FREQUENCYPeng Fan1-0/+5
Set default COUNTER_FREQUENCY according to config header file under include/configs/ i.MX6UL/ULL/7D/8QM/8QXP all has system counter frequency run at 8MHz, so set default value for them. SUNXI/EXYNOS/ROCKCHIP_RK3128/ROCKCHIP_RK3288/ROCKCHIP_RK322X/ROCKCHIP_RK3036 at 24MHz. ARCH_LX2160A at 25MHz ARCH_ZYNQMP at 100MHz
2022-04-21arch: arm: move COUNTER_FREQUENCY from versal to armPeng Fan2-6/+12
Make COUNTER_FREQUENCY usable to armv8 and armv7-a, not limited to versal. And update help message. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-21xilinx: versal: board: use CONFIG_COUNTER_FREQUENCYPeng Fan1-1/+1
Since versal has CONFIG_COUNTER_FREQUENCY, so use it. And COUNTER_FREQUENCY will be dropped. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2022-04-21misc: atsha204a: Remove duplicate CRC-16 implementationPali Rohár2-119/+4
ATSHA204A uses bit-reversed checksum of standard CRC-16 with polynomial x^16 + x^15 + x^2 + 1. This ATSHA204A specific checksum can be calculated just by using common U-Boot functions bitrev16() and crc16(). So replace custom driver CRC-16 implementation by common U-Boot functions. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-04-21fs: ext4: Use CRC-16 implementation from linux/crc16.hPali Rohár5-84/+6
Implementation in linux/crc16.h provides standard CRC-16 algorithm with polynomial x^16 + x^15 + x^2 + 1. Use it and remove duplicate ext4 CRC-16 specific code. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-04-21crc16: Move standard CRC-16 implementation from ubifs to libPali Rohár4-1/+5
This implementation provides standard CRC-16 algorithm with polynomial x^16 + x^15 + x^2 + 1. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-04-21crc16: Rename fs/ubifs/crc16.h to include/linux/crc16.hPali Rohár4-3/+3
File fs/ubifs/crc16.h is standard linux's crc16.h include file. So move it from fs/ubifs to include/linux where are also other linux include files. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-04-21crc16-ccitt: Rename file with CRC-16-CCITT implementation to crc16-ccitt.cPali Rohár4-7/+7
U-Boot CRC-16 implementation uses polynomial x^16 + x^12 + x^5 + 1 which is not standard CRC-16 algorithm, but it is known as CRC-16-CCITT. Rename file crc16.c to crc16-ccitt.c to reduce confusion. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-04-21SPL: Do not enable SPL_SYS_MALLOC_SIMPLE without SPL_FRAMEWORK by defaultPali Rohár1-0/+1
On P2020 board is SPL malloc simple always failing with error and loops: SD boot... alloc space exhausted Bad trap at PC: f8f8b5f0, SR: 21200, vector=d00 NIP: 00000000 XER: 00000000 LR: 00000000 REGS: f8f8b5f0 TRAP: 20000000 DAR: 00000000 MSR: 00021200 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00 GPR00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 GPR08: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 GPR24: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Call backtrace: Exception in kernel pc f8f8b5f0 signal 0 Inspection showed that gd->malloc_limit is zero. And it is because generally SPL_FRAMEWORK initialize SPL's gd->malloc_limit. But when SPL_FRAMEWORK is not enabled then in most cases nobody initialize gd->malloc_limit and so SPL malloc simple does not work. So disable SPL_SYS_MALLOC_SIMPLE by default when SPL_FRAMEWORK is not enabled. SPL_SYS_MALLOC_SIMPLE can be disabled only by setting SPL_SYS_MALLOC_F_LEN to zero. So do it. This change fixes SPL error "alloc space exhausted" on P2020 board. Signed-off-by: Pali Rohár <pali@kernel.org>
2022-04-21Merge https://source.denx.de/u-boot/custodians/u-boot-marvellWIP/21Apr2022Tom Rini33-432/+628
- mrvl_uart.sh: Remove script (Pali) - Fix Espressobin build for configs where ENV is not in SPI (Rogier) - mvebu: a37xx: Add support for reading OTP (Pali) - mvebu: uDPU: Ethernet fixes and misc DT and defconfig changes (Robert) - mvebu: Add support for reading LD0 and LD1 eFuse (Pali) - kwboot: Replace fstat()+st_size by lseek()+SEEK_END (Pali) - mvebu: turris_omnia: Enable CONFIG_CMD_FUSE (Pali) - arm: Add CONFIG_SPL_SYS_NO_VECTOR_TABLE used on 32bit MVEBU (Pali) - mvebu: a37xx: Add support for writing Security OTP values (Pali) - mvebu: turris: Misc enhancements and cleanups / fixes (Pali) - Sheevaplug : Use Marvell uclass mvgbe and PHY driver for Ethernet (Tony)
2022-04-21Merge branch '2022-04-21-assorted-improvements'Tom Rini25-249/+1359
- For the environment, add a arch_env_get_location hook and make use of it on some NXP platforms (so that boards can override SoCs). - Remove some unused squashfs code from SPL - Resync am335x beaglebone related DTS files - Enable SPL_SEPARATE_BSS if SPL_BSS_START_ADDR is used
2022-04-21imx: Fix build errorYe Li1-3/+1
Fix wrong environment.h and remove DECLARE_GLOBAL_DATA_PTR Fixes: 30e39ac7c9 (imx: imx7 Support for Manufacturing Protection) Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
2022-04-21imx: Update FSL_MFGPROT config for iMX8MYe Li2-1/+5
Update the Kconfig and Makefile to allow build for iMX8M and restrict the build only in u-boot. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
2022-04-21crypto/fsl: add invalidate_dcache_range for hash output bufferGaurav Jain1-6/+8
HW accelerated hash operations are giving incorrect hash output. so invalidate cache lines to avoid cache overwriting in DDR memory region. caam_hash() -moved address alignment check in the beginning of function. -added invalidate_dcache_range for pout buffer before running descriptor. Fixes: d7af2baa49 (crypto/fsl: Fix HW accelerated hash commands) Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-04-21doc: imx8mn_evk: Do not export ATF_LOAD_ADDRFabio Estevam1-1/+0
The imx8mn_evk target have been converted to use binman. With the binman approach the ATF load address is described via devicetree, so remove the now unneeded instruction of exporting ATF_LOAD_ADDR. Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-04-21imx8mn_evk: Enable cache in SPLFabio Estevam1-2/+0
There is no reason for disabling I-cache and D-cache in SPL. Remove the unneeded CONFIG_SPL_SYS_ICACHE_OFF and CONFIG_SPL_SYS_DCACHE_OFF options. Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-04-21board: bsh: imx8mn_bsh_smm_s2/s2pro: enable DM_SERIALMichael Trimarchi3-9/+4
Enable DM_SERIAL for both U_Boot and the SPL. The uart4 and its pinmux are already marked with u-boot,dm-spl but we need to move the call to preloader_console_init() after spl_init() to avoid a board hang as dm can't be used until after spl_init(). Remove the manual config of the UART pinmux now that it is no longer needed. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Cc: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Tested-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
2022-04-21arm: dts: imx8mp: add of-list support to common imx8mp-u-boot.dtsiTim Harvey1-5/+6
Add support for OF-LIST to common imx8mp-u-boot.dtsi so that it can be used with boards that have multiple DTB's. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Teresa Remmet <t.remmet@phytec.de> Cc: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-04-21crypto/fsl: Clear the memory when blob decapsulation failsGaurav Jain1-0/+4
issue: blob decapsulation operation store the decrypted data in memory even if ICV check failed. fix: clear the blob data output memory. Fixes: c5de15cbc8 (crypto/fsl: Add command for encapsulating/decapsulating blobs) Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com> Reviewed-by: Kshitiz Varshney <kshitiz.varshney@nxp.com> Tested-by: Kshitiz Varshney <kshitiz.varshney@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-04-21imx: imx8mq-evk: enable CONFIG_DM_SERIALPeng Fan2-0/+33
Marked related nodes as u-boot,dm-spl for serial driver model Enable CONFIG_DM_SERIAL Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-21imx: imx8mn_evk: enable CONFIG_DM_SERIALPeng Fan3-11/+3
Enable CONFIG_DM_SERIAL. uart2 and its pinmux was already marked with u-boot,dm-spl. move the preloader_console_init() call after spl_init() to avoid board hang Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-21imx: imx8mm_evk: enable CONFIG_DM_SERIALPeng Fan2-10/+3
Enable CONFIG_DM_SERIAL. uart2 and its pinmux was already marked with u-boot,dm-spl. move the preloader_console_init() call after spl_early_init() to avoid board hang Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-21imx: imx8mp_evk: enable CONFIG_DM_SERIALPeng Fan2-8/+1
Enable CONFIG_DM_SERIAL. uart2 and its pinmux was already marked with u-boot,dm-spl. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-21scripts: config_whitelist: drop CONFIG_MMCROOTPeng Fan1-1/+0
Drop CONFIG_MMCROOT, no users now. Reviewed-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-04-21configs: drop CONFIG_MMCROOTPeng Fan27-51/+23
CONFIG_MMCROOT is only used to set mmcroot, no need a dedicated macro. Script as below " for i in `ls include/configs/*.h` do mmcroot=`sed -n '/define.*MMCROOT/ p' $i | awk -F\" '{ print $2;}'` if [ ! -n "$mmcroot" ]; then continue fi sed -i '/define.*MMCROOT/ d' $i sed -i 's,\" CONFIG_MMCROOT \",'$mmcroot',g' $i done " Reviewed-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Peng Fan <peng.fan@nxp.com>
generated by cgit v1.1 at 2024-08-05 22:57:02 +0000