aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-07-19Merge https://source.denx.de/u-boot/custodians/u-boot-marvellWIP/19Jul2021Tom Rini14-37/+548
- Marvell SheevaPlug: Convert Ethernet and SATA to Driver Model (Tony) - Zyxel NSA310S NAS: Convert to Driver Model (Tony) - Turris_omnia: Add `u-boot-env` NOR partition (Marek) - Turris_omnia: Fixup MTD partitions in Linux' DTB (Marek) - Espressobin: Enable 'mtd' command and define SPI NOR partitions (Pali)
2021-07-19Merge tag 'ti-v2021.10-rc1' of ↵Tom Rini67-609/+2466
https://source.denx.de/u-boot/custodians/u-boot-ti - Enabled distro boot for all TI platforms. - Cleanup for AM335x Guardian Board - PRUSS rproc on AM65 platform. - Add PMIC support for J7200 - Misc fixes for Nokia RX-51 # Conflicts: # arch/arm/mach-omap2/am33xx/Kconfig
2021-07-19arm: mvebu: Espressobin: Enable 'mtd' command and define SPI NOR partitionsPali Rohár3-5/+21
U-Boot now supports parsing SPI NOR partitions from Device Tree. So enable 'mtd' command support for Espressobin board and define partition layout in U-Boot Espressobin DTS file. Access to SPI NOR via 'sf' command is old method and 'mtd' command is now preferred variant. From include file remove '#define CONFIG_MTD_PARTITIONS' as this option is now defined and enabled in defconfig file. This change is required to fix compile error: CC arch/arm/lib/asm-offsets.s In file included from include/config.h:4, from include/common.h:16, from lib/asm-offsets.c:14: include/configs/mvebu_armada-37xx.h:63: warning: "CONFIG_MTD_PARTITIONS" redefined #define CONFIG_MTD_PARTITIONS /* required for UBI partition support */ In file included from ././include/linux/kconfig.h:4, from <command-line>: include/generated/autoconf.h:44: note: this is the location of the previous definition #define CONFIG_MTD_PARTITIONS 1 After enabling support for mtd command, output from 'mtd list' on Espressobin board is: => mtd list List of MTD devices: * w25q32dw - device: spi-flash@0 - parent: spi@10600 - driver: jedec_spi_nor - path: /soc/internal-regs/spi@10600/spi-flash@0 - type: NOR flash - block size: 0x1000 bytes - min I/O: 0x1 bytes - 0x000000000000-0x000000400000 : "w25q32dw" - 0x000000000000-0x0000003f0000 : "firmware" - 0x0000003f0000-0x000000400000 : "u-boot-env" => Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-19arm: mvebu: turris_omnia: fixup MTD partitions in Linux' DTBMarek Behún2-0/+91
Fixup SPI NOR partition nodes in Linux' device tree prior booting Linux. Linux' devicetree does not contain "u-boot-env" partition and we do not want to add it there because the address is different between stock U-Boot and current upstream U-Boot. Instead we add code that recreates partition nodes from scratch according to how U-Boot sees them (which is defined in U-Boot's device tree). Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-19ARM: dts: armada-385-turris-omnia: add `u-boot-env` NOR partitionMarek Behún1-0/+11
Specify a separate partition `u-boot-env` for U-Boot's env settings for the Turris Omnia board. Do this only in U-Boot's specific DTS. We do not want to do this in Linux' official DTS, because Omnia's stock U-Boot stores env at a different address, and there are still boards with stock U-Boot. In a subsequent patch will add board code that fixes Linux's DTB before booting Linux. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-19arm: kirkwood: Marvell Sheevaplug: Use Ethernet PHY name and address from ↵Tony Dinh1-12/+42
device tree - In DM Ethernet, the old "egiga0" name is no longer valid, so replace it with Ethernet PHY name from device tree. Also, Ethernet PHY address is available so read it from device tree. Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2021-07-19arm: kirkwood: Marvell Sheevaplug: Add DM SATA and remove IDE configsTony Dinh1-5/+4
Enable DM SATA, removed IDE driver, and add SATA MV driver. Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2021-07-19arm: kirkwood: Marvell Sheevaplug: Add DM Ethernet and DM SATA configsTony Dinh1-1/+5
Add DM_ETH, SATA_MV and associated configs to sheevaplug_defconfig Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2021-07-19arm: kirkwood: NSA310S: Use Ethernet PHY name from device treeTony Dinh1-8/+39
In DM Ethernet, the old "egiga0" name is no longer valid, so replace it with Ethernet PHY name from device tree. Also, Ethernet PHY address is available so read it from device tree. Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2021-07-19arm: kirkwood: NSA310S: Add DM SATA configsTony Dinh1-5/+5
Enable DM SATA, removed IDE driver, and add SATA MV driver. Signed-off-by: Tony Dinh <mibodhi@gmail.com>
2021-07-19arm: kirkwood: NSA310S: Add DM USB, DM Ethernet, and DM SATA configsTony Dinh1-1/+11
Convert to Driver Model. - Add DM USB, DM Ethernet, and DM SATA configs to nsa310s_defconfig - Add CONFIG_DEFAULT_DEVICE_TREE to nsa310s_defconfig - Move CONFIG_ENV_SECT_SIZE from board file to nsa310s_defconfig - Add CONFIG_IDENT_STRING, and CONFIG_NET_RANDOM_ETHADDR to nsa310s_defconfig Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-19arm: kirkwood: NSA310S: Add device tree DTS for Zyxel NSA310S boardTony Dinh2-0/+319
Add device tree kirkwood-nsa310s.dts for Zyxel NSA310S board to convert to Driver Model. Signed-off-by: Tony Dinh <mibodhi@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-18Merge branch '2021-07-18-finalize-migrations'Tom Rini114-7615/+75
- With the deadline for DM_USB (host controller support), DM_VIDEO, DM_SPI_FLASH and DM_PCI now at 2 years past the release where their migration deadline was given, finish removing platforms and enforcing the switch.
2021-07-18Makefile: Remove DM_VIDEO and DM_SPI_FLASH checksWIP/2021-07-18-finalize-migrationsTom Rini1-4/+0
As we have now completed the DM_VIDEO and DM_SPI_FLASH migrations we can remove the checks. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18pci: Require DM_PCITom Rini5-984/+5
As the migration deadline has passed, require that DM_PCI be used. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18usb: Enforce DM_USB migration for USB_HOST devices.Tom Rini28-45/+51
As the deadline for migration to DM_USB, when using a USB host controller has now gone two years past the deadline, enforce migration. This is done by: - Ensuring that all host controller options (other than the very legacy old MUSB ones) now select USB_HOST. USB_HOST now enforces DM_USB and OF_CONTROL. - Remove other parts of Kconfig logic that had platforms pick DM_USB. - To keep Kconfig happy, have some select statements test for USB_HOST as well. - Re-order some Kconfig entries and menus so that we can cleanly pick host or gadget roles. For the various HCD options that have platform glue options, group them together and update dependencies in some cases. - As SPL_DM_USB is not required, on platforms that had not yet enabled it, disable it. Cc: Marek Vasut <marex@denx.de> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Samuel Holland <samuel@sholland.org> Cc: FUKAUMI Naoki <naobsd@gmail.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18treewide: Test on CONFIG_USB_HOST (or CONFIG_CMD_USB) not CONFIG_USBTom Rini7-7/+7
As the logic here is only used when we have a USB host controller, test on CONFIG_USB_HOST rather than CONFIG_USB in general. This lets us move towards using CONFIG_USB only as a menu symbol to say that we have some form of USB, and then USB_HOST or USB_GADGET depending on the role that USB plays within the build. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18tegra: Test on CONFIG_CMD_USB being enabled for distro bootcmdTom Rini1-1/+8
Reuse the common logic to allow for BOOT_TARGET_DEVICES to list USB as a possibility if we're building for a platform that will have USB but not if we don't, so that we don't hit the link-time check for trying to have USB boot on a non-USB system. Acked-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18ge_bx50v3: Remove unused USB related definesTom Rini1-11/+0
These USB defines do not change the build as there is no USB support enabled currently. Cc: Ian Ray <ian.ray@ge.com> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-07-18m68k: Remove M52277EVB boardTom Rini17-1581/+1
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. As this is also the last in family remove the related support as well. Cc: Angelo Durgehello <angelo.dureghello@timesys.com> Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18m68k: Remove M54451EVB boardTom Rini23-2254/+1
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. As this is also the last in family remove the related support as well. Cc: Angelo Durgehello <angelo.dureghello@timesys.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18m68k: Remove M54418TWR boardTom Rini21-1185/+0
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Angelo Durgehello <angelo.dureghello@timesys.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18m68k: Remove M54455EVB boardTom Rini21-1544/+2
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Angelo Durgehello <angelo.dureghello@timesys.com> Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18vinco: Enable DM_USB and DM_SPI_FLASH supportTom Rini1-1/+2
As this platform already enables CONFIG_DM and CONFIG_OF_CONTROL, migrating to DM_USB and DM_SPI_FLASH is just a matter of enabling the correct options. Cc: Gregory CLEMENT <gregory.clement@bootlin.com> u-boot@lists.denx.de (open list) Reported-by: Marek Behun <marek.behun@nic.cz> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18Merge tag 'mips-pull-2021-07-18' of ↵WIP/18Jul2021Tom Rini8-7/+284
https://source.denx.de/u-boot/custodians/u-boot-mips - mips: gardena-smart-gateway: adjust config to new production values - mips: malta: convert to PCI DM and ETH DM
2021-07-18MIPS: malta: enable PCI driver modelDaniel Schwierzeck1-0/+4
Enable DM_PCI and DM_ETH on MIPS Malta. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-07-18MIPS: malta: add support for PCI driver modelDaniel Schwierzeck1-1/+79
As almost all peripherals are connected via PCI dependent on the used core card, PCI setup is always required. Thus run pci_init() including PCI scanning and probing and core card specific setups in board_early_init_r(). Also prepare support for dynamically managing the status of the different PCI DT nodes dependent on used core card via option CONFIG_OF_BOARD_FIXUP. Before this feature can be enabled, the call order of the fix_fdt() init hook in board_init_f needs to be changed. Otherwise rw_fdt_blob points to a read-only NOR flash address. Thus this options needs to stay disabled until the board_init_f problem could be solved. This breaks running the default U-Boot image on real HW using the FPGA core card but Qemu emulation still works. Currently Qemu is more important as MIPS CI tests depend on Malta and the deadline for PCI DM conversion will be enforced soon. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-07-18MIPS: malta: add DT bindings for PCI host controllerDaniel Schwierzeck1-0/+28
Add DT binding for GT64120 and MSC01 PCI controllers. Only GT64120 is enabled by default to support Qemu. The MSC01 node will be dynamically enabled by Malta board code dependent on the plugged core card. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-07-18pci: msc01: convert to driver modelDaniel Schwierzeck1-1/+71
This driver is currently only used on MIPS Malta boards. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-18pci: gt64120: convert to driver modelDaniel Schwierzeck1-1/+73
This driver is currently only used on MIPS Malta boards. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-18dm: pci: add option to map virtual system memory base addressDaniel Schwierzeck2-3/+19
On MIPS the DRAM start address respectively CONFIG_SYS_SDRAM_BASE is still used as a virtual, CPU-mapped address instead of being used as physical address. Converting all MIPS boards and generic MIPS code to fix that is not trivial. Due to the approaching deadline for PCI DM conversion, this workaround is required for MIPS boards with PCI support until the CONFIG_SYS_SDRAM_BASE issue could be solved. Add a compile-time option to let the PCI uclass core optionally map the DRAM address to a physical address when adding the PCI region of type PCI_REGION_SYS_MEMORY. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-18mips: mt7688: gardena-smart-gateway: Adjust to production valuesReto Schneider1-1/+10
This commit updates the default config with the values that will be used soon on the MediaTek MT7688 based GARDENA smart gateway. CONFIG_SPL_SYS_MALLOC_F_LEN had to be increased due to the more demanding new configuration. Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-18Merge tag 'efi-2021-10-rc1-2' of ↵Tom Rini11-480/+192
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2021-10-rc1-2 * Correct device path nodes for GUID partitions * Embed keys to check update capsules instead of providing then in DTB * Increase event log buffer size for measured boot.
2021-07-18doc: Update CapsuleUpdate READMEsIlias Apalodimas2-203/+125
Since we removed embeddingg the capsule key into a .dtb and fixed authenticated capsule updates for all boards, move the relevant documentation in the efi file and update it accordingly Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-07-18mkeficapsule: Remove dtb related optionsIlias Apalodimas1-222/+7
commit 322c813f4bec ("mkeficapsule: Add support for embedding public key in a dtb") added a bunch of options enabling the addition of the capsule public key in a dtb. Since now we embedded the key in U-Boot's .rodata we don't this this functionality anymore Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-07-18efi_capsule: Move signature from DTB to .rodataIlias Apalodimas7-47/+49
The capsule signature is now part of our DTB. This is problematic when a user is allowed to change/fixup that DTB from U-Boots command line since he can overwrite the signature as well. So Instead of adding the key on the DTB, embed it in the u-boot binary it self as part of it's .rodata. This assumes that the U-Boot binary we load is authenticated by a previous boot stage loader. Reviewed-by: Masami Hiramatsu <masami.hiramatsu@linaro.org> Tested-by: Masami Hiramatsu <masami.hiramatsu@linaro.org> Tested-by: Sughosh Ganu <sughosh.ganu@linaro.org> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-07-18efi_loader: increase eventlog buffer sizeMasahisa Kojima1-1/+1
TCG PC Client PFP spec says "The Log Area Minimum Length for the TCG event log MUST be at least 64KB." in ACPI chapter. This commit increase the buffer size to 64KB. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-07-18efi_loader: Use %pD to log device-path instead of local efi_dp_str()Masami Hiramatsu1-5/+1
Use %pD to log device-path instead of using efi_dp_str() and efi_free_pool() locally in find_boot_device(). This is a cleanup patch, no feature update nor fix. Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-07-18efi_loader: set partition GUID in device path for SIG_TYPE_GUIDAlfonso Sánchez-Beato2-2/+9
Previously, the GPT device GUID was being used instead of the partition, which was incorrect. Signed-off-by: Alfonso Sánchez-Beato <alfonso.sanchez-beato@canonical.com> Let EFI_LOADER select CONFIG_PARTITION_UUIDS. Use log_warning() instead of printf() for warning. Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-07-17Merge branch '2021-07-16-cleanup-image-support'Tom Rini31-236/+259
- A large rework of the logic around supporting various image types/formats and sharing between the host and target.
2021-07-17Merge tag 'u-boot-imx-20210717' of ↵WIP/17Jul2021Tom Rini55-290/+2826
https://gitlab.denx.de/u-boot/custodians/u-boot-imx i.MX ---- - mx7ulp : fix WDOG - imx8 : Phytec - USB3 support for i.MX8 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/8277
2021-07-17mx7ulp: wdog: Wait for WDOG unlock and reconfiguration to completeBreno Lima1-14/+25
According to i.MX7ULP Reference Manual we should wait for WDOG unlock and reconfiguration to complete. Section "59.5.3 Configure Watchdog" provides the following example: DisableInterrupts; //disable global interrupt WDOG_CNT = 0xD928C520; //unlock watchdog while(WDOG_CS[ULK]==0); //wait until registers are unlocked WDOG_TOVAL = 256; //set timeout value WDOG_CS = WDOG_CS_EN(1) | WDOG_CS_CLK(1) | WDOG_CS_INT(1) | WDOG_CS_WIN(0) | WDOG_CS_UPDATE(1); while(WDOG_CS[RCS]==0); //wait until new configuration takes effect EnableInterrupts; //enable global interrupt Update U-Boot WDOG driver to align with i.MX7ULP reference manual. Use 32 bits accessing to CS register. According to RM, the bits in this register only can write once after unlock. So using 8 bits access will cause problem. Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Breno Lima <breno.lima@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-07-17mx7ulp: Update unlock and refresh sequences in sWDOG driverBreno Lima1-6/+12
According to i.MX7ULP Reference Manual the second word write for both UNLOCK and REFRESH operations must occur in maximum 16 bus clock. The current code is using writel() function which has a DMB barrier to order the memory access. The DMB between two words write may introduce some delay in certain circumstance, causing a WDOG timeout due to 16 bus clock window requirement. Replace writel() function by __raw_writel() to achieve a faster memory access and avoid such issue. Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Breno Lima <breno.lima@nxp.com>
2021-07-17imx8mq_evk: Enable the USB3.0 host portYe Li2-0/+13
Setup USB clock in board codes, and enable the DWC3 XHCI and PHY drivers to make USB3.0 host port working on i.MX8MQ EVK. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Patrick Wildt <patrick@blueri.se>
2021-07-17arm: imx8mq: Add USB clock init functionYe Li2-0/+23
Add clock function to setup relevant clocks for USB3.0 controllers and PHYs on i.MX8MQ Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Patrick Wildt <patrick@blueri.se> Tested-by: Patrick Wildt <patrick@blueri.se>
2021-07-17arm: dts: imx8mq: Add alias for two usb controllersYe Li1-0/+2
Add alias for two DWC3 usb controllers to fix the seq index. Signed-off-by: Ye Li <ye.li@nxp.com> Tested-by: Patrick Wildt <patrick@blueri.se>
2021-07-17phy: phy-imx8mq-usb: Add USB PHY driver for i.MX8MQYe Li3-0/+205
Add the USB PHY driver for i.MX8MQ to work with DWC3 USB controller. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Patrick Wildt <patrick@blueri.se> Tested-by: Patrick Wildt <patrick@blueri.se>
2021-07-16tools: Use a single target-independent config to enable OpenSSLAlexandru Gagniuc2-17/+42
Host tool features, such as mkimage's ability to sign FIT images were enabled or disabled based on the target configuration. However, this misses the point of a target-agnostic host tool. A target's ability to verify FIT signatures is independent of mkimage's ability to create those signatures. In fact, u-boot's build system doesn't sign images. The target code can be successfully built without relying on any ability to sign such code. Conversely, mkimage's ability to sign images does not require that those images will only work on targets which support FIT verification. Linking mkimage cryptographic features to target support for FIT verification is misguided. Without loss of generality, we can say that host features are and should be independent of target features. While we prefer that a host tool always supports the same feature set, we recognize the following - some users prefer to build u-boot without a dependency on OpenSSL. - some distros prefer to ship mkimage without linking to OpenSSL To allow these use cases, introduce a host-only Kconfig which is used to select or deselect libcrypto support. Some mkimage features or some host tools might not be available, but this shouldn't affect the u-boot build. I also considered setting the default of this config based on FIT_SIGNATURE. While it would preserve the old behaviour it's also contrary to the goals of this change. I decided to enable it by default, so that the default build yields the most feature-complete mkimage. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-07-16image: Add support for relocating crypto_algos in linker listsAlexandru Gagniuc1-0/+13
Function pointers from crypto_algos array are relocated, when NEEDS_MANUAL_RELOC is set. This relocation doesn't happen if the algo is placed in a linker list. Implement this relocation. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Michal Simek <michal.simek@xilinx.com>
2021-07-16image: Eliminate IMAGE_ENABLE_VERIFY_ECDSA macroAlexandru Gagniuc1-3/+0
This macro is no longer needed for code flow or #ifdefs. Remove it. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-09-11 07:48:17 +0000