aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-07-18Merge tag 'mips-pull-2021-07-18' of ↵WIP/18Jul2021Tom Rini8-7/+284
https://source.denx.de/u-boot/custodians/u-boot-mips - mips: gardena-smart-gateway: adjust config to new production values - mips: malta: convert to PCI DM and ETH DM
2021-07-18MIPS: malta: enable PCI driver modelDaniel Schwierzeck1-0/+4
Enable DM_PCI and DM_ETH on MIPS Malta. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-07-18MIPS: malta: add support for PCI driver modelDaniel Schwierzeck1-1/+79
As almost all peripherals are connected via PCI dependent on the used core card, PCI setup is always required. Thus run pci_init() including PCI scanning and probing and core card specific setups in board_early_init_r(). Also prepare support for dynamically managing the status of the different PCI DT nodes dependent on used core card via option CONFIG_OF_BOARD_FIXUP. Before this feature can be enabled, the call order of the fix_fdt() init hook in board_init_f needs to be changed. Otherwise rw_fdt_blob points to a read-only NOR flash address. Thus this options needs to stay disabled until the board_init_f problem could be solved. This breaks running the default U-Boot image on real HW using the FPGA core card but Qemu emulation still works. Currently Qemu is more important as MIPS CI tests depend on Malta and the deadline for PCI DM conversion will be enforced soon. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-07-18MIPS: malta: add DT bindings for PCI host controllerDaniel Schwierzeck1-0/+28
Add DT binding for GT64120 and MSC01 PCI controllers. Only GT64120 is enabled by default to support Qemu. The MSC01 node will be dynamically enabled by Malta board code dependent on the plugged core card. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-07-18pci: msc01: convert to driver modelDaniel Schwierzeck1-1/+71
This driver is currently only used on MIPS Malta boards. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-18pci: gt64120: convert to driver modelDaniel Schwierzeck1-1/+73
This driver is currently only used on MIPS Malta boards. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-18dm: pci: add option to map virtual system memory base addressDaniel Schwierzeck2-3/+19
On MIPS the DRAM start address respectively CONFIG_SYS_SDRAM_BASE is still used as a virtual, CPU-mapped address instead of being used as physical address. Converting all MIPS boards and generic MIPS code to fix that is not trivial. Due to the approaching deadline for PCI DM conversion, this workaround is required for MIPS boards with PCI support until the CONFIG_SYS_SDRAM_BASE issue could be solved. Add a compile-time option to let the PCI uclass core optionally map the DRAM address to a physical address when adding the PCI region of type PCI_REGION_SYS_MEMORY. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-18mips: mt7688: gardena-smart-gateway: Adjust to production valuesReto Schneider1-1/+10
This commit updates the default config with the values that will be used soon on the MediaTek MT7688 based GARDENA smart gateway. CONFIG_SPL_SYS_MALLOC_F_LEN had to be increased due to the more demanding new configuration. Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-18Merge tag 'efi-2021-10-rc1-2' of ↵Tom Rini11-480/+192
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2021-10-rc1-2 * Correct device path nodes for GUID partitions * Embed keys to check update capsules instead of providing then in DTB * Increase event log buffer size for measured boot.
2021-07-18doc: Update CapsuleUpdate READMEsIlias Apalodimas2-203/+125
Since we removed embeddingg the capsule key into a .dtb and fixed authenticated capsule updates for all boards, move the relevant documentation in the efi file and update it accordingly Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-07-18mkeficapsule: Remove dtb related optionsIlias Apalodimas1-222/+7
commit 322c813f4bec ("mkeficapsule: Add support for embedding public key in a dtb") added a bunch of options enabling the addition of the capsule public key in a dtb. Since now we embedded the key in U-Boot's .rodata we don't this this functionality anymore Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-07-18efi_capsule: Move signature from DTB to .rodataIlias Apalodimas7-47/+49
The capsule signature is now part of our DTB. This is problematic when a user is allowed to change/fixup that DTB from U-Boots command line since he can overwrite the signature as well. So Instead of adding the key on the DTB, embed it in the u-boot binary it self as part of it's .rodata. This assumes that the U-Boot binary we load is authenticated by a previous boot stage loader. Reviewed-by: Masami Hiramatsu <masami.hiramatsu@linaro.org> Tested-by: Masami Hiramatsu <masami.hiramatsu@linaro.org> Tested-by: Sughosh Ganu <sughosh.ganu@linaro.org> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-07-18efi_loader: increase eventlog buffer sizeMasahisa Kojima1-1/+1
TCG PC Client PFP spec says "The Log Area Minimum Length for the TCG event log MUST be at least 64KB." in ACPI chapter. This commit increase the buffer size to 64KB. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-07-18efi_loader: Use %pD to log device-path instead of local efi_dp_str()Masami Hiramatsu1-5/+1
Use %pD to log device-path instead of using efi_dp_str() and efi_free_pool() locally in find_boot_device(). This is a cleanup patch, no feature update nor fix. Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-07-18efi_loader: set partition GUID in device path for SIG_TYPE_GUIDAlfonso Sánchez-Beato2-2/+9
Previously, the GPT device GUID was being used instead of the partition, which was incorrect. Signed-off-by: Alfonso Sánchez-Beato <alfonso.sanchez-beato@canonical.com> Let EFI_LOADER select CONFIG_PARTITION_UUIDS. Use log_warning() instead of printf() for warning. Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-07-17Merge branch '2021-07-16-cleanup-image-support'Tom Rini31-236/+259
- A large rework of the logic around supporting various image types/formats and sharing between the host and target.
2021-07-17Merge tag 'u-boot-imx-20210717' of ↵WIP/17Jul2021Tom Rini55-290/+2826
https://gitlab.denx.de/u-boot/custodians/u-boot-imx i.MX ---- - mx7ulp : fix WDOG - imx8 : Phytec - USB3 support for i.MX8 CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/8277
2021-07-17mx7ulp: wdog: Wait for WDOG unlock and reconfiguration to completeBreno Lima1-14/+25
According to i.MX7ULP Reference Manual we should wait for WDOG unlock and reconfiguration to complete. Section "59.5.3 Configure Watchdog" provides the following example: DisableInterrupts; //disable global interrupt WDOG_CNT = 0xD928C520; //unlock watchdog while(WDOG_CS[ULK]==0); //wait until registers are unlocked WDOG_TOVAL = 256; //set timeout value WDOG_CS = WDOG_CS_EN(1) | WDOG_CS_CLK(1) | WDOG_CS_INT(1) | WDOG_CS_WIN(0) | WDOG_CS_UPDATE(1); while(WDOG_CS[RCS]==0); //wait until new configuration takes effect EnableInterrupts; //enable global interrupt Update U-Boot WDOG driver to align with i.MX7ULP reference manual. Use 32 bits accessing to CS register. According to RM, the bits in this register only can write once after unlock. So using 8 bits access will cause problem. Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Breno Lima <breno.lima@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-07-17mx7ulp: Update unlock and refresh sequences in sWDOG driverBreno Lima1-6/+12
According to i.MX7ULP Reference Manual the second word write for both UNLOCK and REFRESH operations must occur in maximum 16 bus clock. The current code is using writel() function which has a DMB barrier to order the memory access. The DMB between two words write may introduce some delay in certain circumstance, causing a WDOG timeout due to 16 bus clock window requirement. Replace writel() function by __raw_writel() to achieve a faster memory access and avoid such issue. Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Breno Lima <breno.lima@nxp.com>
2021-07-17imx8mq_evk: Enable the USB3.0 host portYe Li2-0/+13
Setup USB clock in board codes, and enable the DWC3 XHCI and PHY drivers to make USB3.0 host port working on i.MX8MQ EVK. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Patrick Wildt <patrick@blueri.se>
2021-07-17arm: imx8mq: Add USB clock init functionYe Li2-0/+23
Add clock function to setup relevant clocks for USB3.0 controllers and PHYs on i.MX8MQ Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Patrick Wildt <patrick@blueri.se> Tested-by: Patrick Wildt <patrick@blueri.se>
2021-07-17arm: dts: imx8mq: Add alias for two usb controllersYe Li1-0/+2
Add alias for two DWC3 usb controllers to fix the seq index. Signed-off-by: Ye Li <ye.li@nxp.com> Tested-by: Patrick Wildt <patrick@blueri.se>
2021-07-17phy: phy-imx8mq-usb: Add USB PHY driver for i.MX8MQYe Li3-0/+205
Add the USB PHY driver for i.MX8MQ to work with DWC3 USB controller. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Patrick Wildt <patrick@blueri.se> Tested-by: Patrick Wildt <patrick@blueri.se>
2021-07-16tools: Use a single target-independent config to enable OpenSSLAlexandru Gagniuc2-17/+42
Host tool features, such as mkimage's ability to sign FIT images were enabled or disabled based on the target configuration. However, this misses the point of a target-agnostic host tool. A target's ability to verify FIT signatures is independent of mkimage's ability to create those signatures. In fact, u-boot's build system doesn't sign images. The target code can be successfully built without relying on any ability to sign such code. Conversely, mkimage's ability to sign images does not require that those images will only work on targets which support FIT verification. Linking mkimage cryptographic features to target support for FIT verification is misguided. Without loss of generality, we can say that host features are and should be independent of target features. While we prefer that a host tool always supports the same feature set, we recognize the following - some users prefer to build u-boot without a dependency on OpenSSL. - some distros prefer to ship mkimage without linking to OpenSSL To allow these use cases, introduce a host-only Kconfig which is used to select or deselect libcrypto support. Some mkimage features or some host tools might not be available, but this shouldn't affect the u-boot build. I also considered setting the default of this config based on FIT_SIGNATURE. While it would preserve the old behaviour it's also contrary to the goals of this change. I decided to enable it by default, so that the default build yields the most feature-complete mkimage. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-07-16image: Add support for relocating crypto_algos in linker listsAlexandru Gagniuc1-0/+13
Function pointers from crypto_algos array are relocated, when NEEDS_MANUAL_RELOC is set. This relocation doesn't happen if the algo is placed in a linker list. Implement this relocation. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Michal Simek <michal.simek@xilinx.com>
2021-07-16image: Eliminate IMAGE_ENABLE_VERIFY_ECDSA macroAlexandru Gagniuc1-3/+0
This macro is no longer needed for code flow or #ifdefs. Remove it. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-16image: Eliminate IMAGE_ENABLE_VERIFY macroAlexandru Gagniuc1-4/+1
This macro is no longer needed for code flow or #ifdefs. Remove it. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-16lib: rsa: Remove #ifdefs from rsa.hAlexandru Gagniuc1-47/+0
It is no longer necessary to implement rsa_() functions as no-ops depending on config options. It is merely sufficient to provide the prototypes, as the rsa code is no longer linked when unused. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-16lib: ecdsa: Remove #ifdefs from ecdsa.hAlexandru Gagniuc1-25/+0
It is no longer necessary to implement ecdsa_() functions as no-ops depending on config options. It is merely sufficient to provide the prototypes, as the ecdsa code is no longer linked when unused. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-16image: image-sig.c: Remove crypto_algos arrayAlexandru Gagniuc1-21/+0
Crytographic algorithms (currently RSA), are stored in linker lists. The crypto_algos array is unused, so remove it, and any logic associated with it. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-16image: rsa: Move verification algorithm to a linker listAlexandru Gagniuc2-10/+16
Move the RSA verification crytpo_algo structure out of the crypto_algos array, and into a linker list. Although it appears we are adding an #ifdef to rsa-verify.c, the gains outweigh this small inconvenience. This is because rsa_verify() is defined differently based on #ifdefs. This change allows us to have a single definition of rsa_verify(). Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-16image: Add support for placing crypto_algo in linker listsAlexandru Gagniuc2-0/+14
The purpose of this change is to enable crypto algorithms to be placed in linker lists, rather than be declared as a static array. The goal is to remove the crypto_algos array in a subsequent patch. Create a new linker list named "cryptos", and search it when image_get_crypto_algo() is invoked. NOTE that adding support for manual relocation of crypto_algos within linker lists is beyond the scope of this patch. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-16common: image-sig.c: Remove host-specific logic and #ifdefsAlexandru Gagniuc1-37/+2
Remove any ifdefs in image-sig.c that were previously used to differentiate from the host code. Note that all code dedicated to relocating ->sign() and ->add_verify_data)_ can be safely removed, as signing is not supported target-side. NOTE that although it appears we are removing ecdsa256 support, this is intentional. ecdsa_verify() is a no-op on the target, and is currently only used by host code. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-16common: Move host-only logic in image-sig.c to separate fileAlexandru Gagniuc2-1/+134
image-sig.c is used to map a hash or crypto algorithm name to a handler of that algorithm. There is some similarity between the host and target variants, with the differences worked out by #ifdefs. The purpose of this change is to remove those ifdefs. First, copy the file to a host-only version, and remove target specific code. Although it looks like we are duplicating code, subsequent patches will change the way target algorithms are searched. Besides we are only duplicating three string to struct mapping functions. This isn't something to fuss about. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-07-16image: Drop IMAGE_ENABLE_BEST_MATCHSimon Glass2-6/+1
This is not needed with Kconfig, since we can use IS_ENABLED() easily enough. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-07-16image: Drop IMAGE_ENABLE_SHAxxxSimon Glass2-24/+3
We already have a host Kconfig for these SHA options. Use CONFIG_IS_ENABLED(SHAxxx) directly in the code shared with the host build, so we can drop the unnecessary indirections. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-07-16image: Drop IMAGE_ENABLE_SHA1Simon Glass2-9/+1
We already have a host Kconfig for SHA1. Use CONFIG_IS_ENABLED(SHA1) directly in the code shared with the host build, so we can drop the unnecessary indirection. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-07-16Kconfig: Rename SPL_MD5_SUPPORT to SPL_MD5Simon Glass2-2/+2
Drop the _SUPPORT suffix so we can use CONFIG_IS_ENABLED() with this option. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-07-16Kconfig: Rename SPL_CRC32_SUPPORT to SPL_CRC32Simon Glass18-19/+19
Drop the _SUPPORT suffix so we can use CONFIG_IS_ENABLED() with this option. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-07-16image: Rename CONFIG_FIT_ENABLE_RSASSA_PSS_SUPPORTSimon Glass8-13/+13
Drop the ENABLE and SUPPORT parts of this, which are redundant. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-07-16image: Rename SPL_SHAxxx_SUPPORT to SPL_FIT_SHAxxxSimon Glass2-8/+8
These option are named inconsistently with other SPL options, thus making them incompatible with the CONFIG_IS_ENABLED() macro. Rename them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-07-16image: Shorten FIT_ENABLE_SHAxxx_SUPPORTSimon Glass3-10/+10
The ENABLE part of this name is redundant, since all boolean Kconfig options serve to enable something. The SUPPORT part is also redundant since Kconfigs can be assumed to enable support for something. Together they just serve to make these options overly long and inconsistent with other options. Rename FIT_ENABLE_SHAxxx_SUPPORT to FIT_SHAxxx Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-07-16Merge branch '2021-07-15-assorted-fixes'Tom Rini17-41/+77
- Large number of Coverity reported issues addressed - m41t62 bugfix - Support more Android image compression formats - FIT + DTO bugfix
2021-07-16Merge https://source.denx.de/u-boot/custodians/u-boot-marvellWIP/16Jul2021Tom Rini3-5/+17
- designware_wdt: reset watchdog in designware_wdt_stop() function (Meng) - socfpga_stratix10: enable wdt command (Meng) - wdt-uclass: Use IS_ENABLED for WATCHDOG_AUTOSTART (Teresa)
2021-07-16Merge tag 'u-boot-stm32-20210715' of ↵Tom Rini18-76/+369
https://source.denx.de/u-boot/custodians/u-boot-stm - DTS: alignment with Linux kernel v5.13 for stm32mp15 boards - STM32MP1: update the stm32key command - STM32MP1: activate the rng command - STM32MP1: fix the stm32prog command (help, parttition size) - STM32MP1: add fdtoverlay_addr_r variable - STM32MP1: correctly managed SYSCON/SYSCFG clock - STM32MP1: remove mmc alias and directly use device instance in boot_instance variable
2021-07-16drivers: watchdog: wdt-uclass: Use IS_ENABLED for WATCHDOG_AUTOSTARTTeresa Remmet1-1/+1
There is no separate SPL/TPL config for WATCHDOG_AUTOSTART. So use IS_ENABLED instead of CONFIG_IS_ENABLED to make watchdog working in SPL again. Fixes: 830d29ac3721 ("watchdog: Allow to use CONFIG_WDT without starting watchdog") Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Reviewed-by: Stefan Roese <sr@denx.de>
2021-07-16arm: socfpga: socfpga_stratix10: enable wdt command by defaultMengLi1-0/+1
In latest u-boot code, watchdog feature is implemented, so enable wdt command by default. Signed-off-by: Meng Li <Meng.Li@windriver.com>
2021-07-16driver: watchdog: reset watchdog in designware_wdt_stop() functionMengLi1-4/+15
In uboot command line environment, watchdog is not able to be stopped with below commands: SOCFPGA_STRATIX10 # wdt dev watchdog@ffd00200 SOCFPGA_STRATIX10 # wdt stop Refer to watchdog driver in linux kernel, it is also need to reset watchdog after disable it so that the disable action takes effect. Signed-off-by: Meng Li <Meng.Li@windriver.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Sean Anderson <sean.anderson@seco.com>
2021-07-16ARM: dts: stm32mp15: remove mmc aliasPatrick Delaunay2-3/+0
Remove the mmc alias no more required as the sequence number of mmc device is used for boot_instance. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
2021-07-16stm32mp: use device sequence number in boot_instance variablePatrick Delaunay3-9/+46
Use the device sequence number in boot_instance variable and no more the SDMMC instance provided by ROM code/TF-A. After this patch we don't need to define the mmc alias in device tree, for example: mmc0 = &sdmmc1; mmc1 = &sdmmc2; mmc2 = &sdmmc3; to have a correct mapping between the ROM code boot device = "${boot_device}${boot_instance}" and the MMC device in U-Boot. With this patch the 'mmc0' device (used in mmc commands) is always used when only one instance sdmmc is activated in device tree, even if it is only the sdmmc2 or sdmmc3. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
generated by cgit v1.1 at 2024-08-05 15:08:00 +0000