aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-06-18ARM: rmobile: Increase PHY auto-negotiation timeout to 20sMarek Vasut1-0/+3
The ethernet PHY on all known Gen3 boards takes a while to come out of reset, increase the auto-negotiation timeout to prevent it from timing out in case the ethernet is used right after the board was reset. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-06-18colibri_imx6: fix video stdout in default environmentAnatolij Gustschin1-1/+2
After migration to DM 'vga' name is not longer supported, change it to 'vidconsole' in the default environment. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-06-18apalis_imx6: fix video stdout in default environmentAnatolij Gustschin1-1/+2
After migration to DM 'vga' name is not longer supported, change it to 'vidconsole' in the default environment. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-06-18cm_fx6: fix video stdout in default environmentAnatolij Gustschin1-2/+2
After migration to DM 'vga' name is not longer supported, change it to 'vidconsole' in the default environment. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Nikita Kiryanov <nikita@compulab.co.il>
2020-06-18Merge tag 'u-boot-amlogic-20200618' of ↵Tom Rini47-1967/+2134
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - move amlogic board documentation into doc/board in RsT format
2020-06-18board: amlogic: add board doc files to MAINTAINERSNeil Armstrong10-0/+18
Add the recently added reStructuredText board documentation in the appropriate MAINTAINERS files. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-06-18board: amlogic: move boards doc into doc/board/amlogicNeil Armstrong37-1967/+2116
Move the natural text Amlogic board README files to doc/board/amlogic into reStructuredText and : - add reStructuredText markup for bash code - fix secondary titles markup - move board support into global support matrix Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-06-16Merge tag 'u-boot-stm32-20200616' of ↵Tom Rini5-15/+38
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - fix boot with OP-TEE for stm32mp15 boards
2020-06-16dts: ARM: stm32mp15: add OP-TEE node in u-boot DTSIEtienne Carriere4-10/+29
Add OP-TEE firmware node in stm32mp15 U-Boot DTSI. This node is needed since commit [1] that changed U-Boot/stm32mp15 to detect OP-TEE availability by probing the resource instead of relying on U-Boot configuration. The software sequence implemented by [1] is fine but U-Boot DTS/DTSI files were not updated accordingly since, hence OP-TEE presence is never detected by U-Boot, preventing Linux kernel from using OP-TEE resources. For consistency and to synchronize stm32mp15 DTSI files (excluding U-Boot specific DTSI files) with the Linux kernel ones, this change also moves the OP-TEE reserved memory nodes from board generic DTSI files to U-Boot specific board DTSI files. Link: [1] commit 43df0a159df6 ("stm32mp1: dynamically detect op-tee presence") Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-06-16board: stm32mp1: fix handling of DT OP-TEE reserved memory nodesEtienne Carriere1-5/+9
Fix the sequence in stm32mp1 fdt.c that disables OP-TEE resources defined in FDT when U-boot detects OP-TEE firmware is not present. Before this change, helper function stm32_fdt_disable_optee() set property status to "disabled" for the OP-TEE reserved memory nodes but this has no impact since Linux kernel does not consider the status property for reserved-memory subnodes. This change make U-Boot to attempt to delete the node instead. Fixes: 4a1b975dac02 ("board: stm32mp1: reserve memory for OP-TEE in device tree") Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-06-15Merge tag 'efi-2020-07-rc5' of ↵Tom Rini6-12/+41
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-07-rc5 Use correct printf code in efi_image_parse(). Add random number generation to HTML documentation.
2020-06-15regulator: fix: enable gpio when requestedMark Kettenis2-3/+2
The fix in commit b7adcdd073c0 has the side-effect that the regulator will be disabled when requesting the relevant gpio in regulator_common_ofdata_to_platdata() and enabled in regulator_pre_probe() when the regulator was already enabled. This leads to a short interruption in the 3.3V power to the PCIe slot on the firefly-rk3399 which makes an ADATA SX8000NP NVMe SSD unhappy. Fix this by setting the GPIOD_IS_OUT_ACTIVE flag again when the 'regulator-boot-on' property is set, but check for this property explicitly instead of relying on the "boot_on" member of the uclass platdata. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Tested-by: Patrice Chotard <patrice.chotard@st.com>
2020-06-15Merge branch '2020-06-15-misc-bugfixes'Tom Rini6-25/+8
- Assorted bug fixes
2020-06-15env: Kconfig: cosmetics: update comment for SYS_RELOC_GD_ENV_ADDRPatrick Delaunay1-1/+1
Update the comment for SYS_RELOC_GD_ENV_ADDR as gd->env_addr is updated in board_r.c::initr_reloc_global_data() under the compilation flags CONFIG_SYS_RELOC_GD_ENV_ADDR Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-06-15config: qemu: increase SYS_MALLOC_F_LENHeinrich Schuchardt1-1/+1
Several configutation options require additional memory before relocation: * CONSOLE_RECORD * LOG * RSA The current default of 0x400 is too small to encompass them all. Increase the value of SYS_MALLOC_F_LEN to 0x2000 for ARCH_QEMU. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-06-15Revert "lib: Improve _parse_integer_fixup_radix base 16 detection"Sean Anderson1-17/+1
This reverts commit 0486497e2b5f4d36fa968a1a60fea358cbf70b65. The strtoul has well-defined semantics. It is defined by the C standard and POSIX. To quote the relevant section of the man pages, > If base is zero or 16, the string may then include a "0x" prefix, and the > number will be read in base 16; otherwise, a zero base is taken as 10 > (decimal) unless the next character is '0', in which case it is taken as > 8 (octal). Keeping these semantics is important for several reasons. First, it is very surprising for standard library functions to behave differently than usual. Every other implementation of strtoul has different semantics than the implementation in U-Boot at the moment. Second, it can result in very surprising results from small changes. For example, changing the string "1f" to "20" causes the parsed value to *decrease*. Forcing use of the "0x" prefix to specify hexidecimal numbers is a feature, not a bug. Lastly, this is slightly less performant, since the entire number is parsed twice. This fixes the str_simple_strtoul test failing with test/str_ut.c:29, run_strtoul(): expect_val == val: Expected 0x44b (1099), got 0x1099ab (1087915) test/str_ut.c:46, str_simple_strtoul(): 0 == run_strtoul(uts, str2, 0, 1099, 4): Expected 0x0 (0), got 0x1 (1) Signed-off-by: Sean Anderson <seanga2@gmail.com> CC: Michal Simek <michal.simek@xilinx.com> CC: Shiril Tichkule <shirilt@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-06-15trivial: Fix booot occurencesMichal Simek2-2/+2
s/booot/boot/g The first ase is booot instead of boot and second u-booot instead of u-boot. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-06-15optee: fix copy of optee reserved-memory nodeEtienne Carriere1-4/+3
Fix the loop that parses FDT for a reserved memory node named "optee". Before this change, if at least one subnode was found in the reserved-memory node, the function endlessly looped since instruction continue returned back in the loop without updating variable subnode. This change fixes the issue by using a for loop. Fixes: 6ccb05eae01b ("image: fdt: copy possible optee nodes to a loaded devicetree") Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-06-15Merge tag 'mmc-2020-6-15' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini6-34/+74
- fsl_esdhc sdr104 and hs200 fix and error path fix - fsl_esdhc workaround 3.3v io issue - ca_dw_mmc cleanup - presidio-asic emmc DT update.
2020-06-15mmc: fsl_esdhc: Gracefully fail on unsupported voltage switchMarek Vasut1-2/+3
Unsupported voltage on voltage switch is not an error, do not print error message in such a case. This happens e.g. if the eMMC is already in 1V8 mode or when testing 1V2 mode operation on systems which only do 3V3/1V8 switching. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-06-15mmc: fsl_esdhc: Fix SDR104 and HS200 supportMarek Vasut1-0/+1
The 3V3/1V8 switching could never have worked on any of the iMXes ever since 51313b49f2 ("mmc: fsl_esdhc: support SDR104 and HS200"), because that commit uses priv->vqmmc_dev when switching voltages on mode switch, while local vqmmc_dev in probe to store the regulator pointer. Those are two different variables with the same name. So the priv->vqmmc_dev was always NULL and thus voltage switch between modes never really suceeded. Fix this by assigning priv->vqmmc_dev with value of the vqmmc_dev in probe. Fixes: 51313b49f2 ("mmc: fsl_esdhc: support SDR104 and HS200") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-06-15board: presidio-asic: update eMMC DT informationAlex Nemirovsky1-3/+1
Change DT compatibility name to match change in driver's name. Remove unused io_ds and fifo_mode fields from DT. Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Peng Fan <peng.fan@nxp.com> CC: Jaehoon Chung <jh80.chung@samsung.com> CC: Tom Rini <trini@konsulko.com>
2020-06-15mmc: ca_dw_mmc: Misc cleanup of driverArthur Li1-22/+12
- Rename DT compatible name - Remove uneccessary if-statement to support 8-bit buswidth - Remove redundant error msg - Use symbolic constants in switch statement Signed-off-by: Arthur Li <arthur.li@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Peng Fan <peng.fan@nxp.com> CC: Jaehoon Chung <jh80.chung@samsung.com> CC: Tom Rini <trini@konsulko.com>
2020-06-15mmc: fsl_esdhc: workaround for hardware 3.3v IO reliability issueYangbo Lu3-2/+53
When eSDHC operates at 3.3v, damage can accumulate in an internal level shifter at a higher than expected rate. The faster the interface runs, the more damage accumulates. This issue now is found on LX2160A eSDHC1 for only SD card. The hardware workaround is recommended to use an on-board level shifter that is 1.8v on SoC side and 3.3v on SD card side. For boards without hardware workaround, this option could be enabled, ensuring 1.8v IO voltage and disabling eSDHC if no card. This option assumes no hotplug, and u-boot has to make all the way to to linux to use 1.8v UHS-I speed mode if has card. If you do not want the workaround for better user experience, of course you can choose to not select it running eSDHC in unsafe mode. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2020-06-15mmc: fsl_esdhc: read register once for card inserted statusYangbo Lu1-5/+4
No need to poll register for card inserted status. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2020-06-14efi_loader: printf code in efi_image_parse()Heinrich Schuchardt1-1/+1
For size_t we have to use %zu for printing not %lu. Fixes: 4540dabdcaca ("efi_loader: image_loader: support image authentication") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-06-14doc: random number generationHeinrich Schuchardt5-11/+40
Add random number generation APIs to the HTML documentation. Fix style issues. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-06-14Merge https://gitlab.denx.de/u-boot/custodians/u-boot-usbTom Rini2-224/+265
- eth/r8152: update the firmware
2020-06-14Merge https://gitlab.denx.de/u-boot/custodians/u-boot-socfpgaTom Rini1-0/+4
- cyclone5 bugfix
2020-06-14arm: dts: socfpga: cyclone5: Update i2c-scl-falling-time-nsLey Foon Tan1-0/+4
Commit e71b6f6622d6 ("i2c: designware_i2c: Rewrite timing calculation") change the hcnt and lcnt timing calculation. New timing calculation is based on calculation from Designware i2c databook. After this new timing calculation, hcnt will have negative value with i2c-scl-falling-time-ns 5000 that set in socfpga_cyclone5_socdk.dts. This patch overwrite i2c-scl-falling-time-ns to 300ns (default SCL fall time used in Designware i2c driver) for Uboot. Before the fix: => i2c dev 0 Setting bus to 0 Failure changing bus number (-22) After the fix: => i2c dev 0 Setting bus to 0 => i2c probe Valid chip addresses: 17 51 55 5B 5C 5E 66 68 70 Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-06-14eth/r8152: update the firmwareHayes Wang2-224/+265
Update the firmware to improve compatibility for none-intel USB host controller. The more information is as following. The device has auto-installed driver feature - via switch CD-ROM/NIC mode. But in some corner cases, it would switch to CD-ROM unexpected. This issue results in Lan Function Disabled. While USB PHY transits to P3 from P0 due to the absent of transmitter control, it would issues undefined signal to its link partner. Some Down Stream Port misidentify the undefined signal as wakeup signal. So the link state will not keep in suspend even the system is idle. Signed-off-by: Hayes Wang <hayeswang@realtek.com>
2020-06-12Merge https://gitlab.denx.de/u-boot/custodians/u-boot-spiTom Rini35-2212/+130
- Drop davinci, mxs spi nondm code - Zap nondm soft_spi - Switch few board to DM_SPI - Drop omap3_pandora, pcm051 boards
2020-06-11am335x: sl50: Enable DM_SPIJagan Teki1-0/+1
Enable DM_SPI for am355x sl50 board. Build is fine, but not tested. Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-06-11configs: igep00x0: Enable DM_SPIJagan Teki1-0/+1
Enable DM_SPI for igep00x0 board. Build is fine, but not tested. Cc: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-06-11arm: Remove pcm051 boardJagan Teki10-691/+0
OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Acked-by: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-11arm: Remove omap3_pandora_defconfig boardJagan Teki9-669/+0
OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Acked-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-11spi: davinci: Drop non-dm codeJagan Teki3-172/+6
Now all boards which are using davinci SPI driver have moved to SPL_DM so drop the unneeded non-dm code. Cc: Adam Ford <aford173@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
2020-06-11ks2_evm: Switch to DM_SPL, SPL_OF_CONTROLJagan Teki5-8/+8
This would make SPL build to DM_SPL, SPL_OF_CONTROL. Build fine with but not tested. Cc: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-11spi: atmel: Drop atmel_spi.hJagan Teki1-3/+85
atmel_spi.h has register offsets, and atmel_spi_slave structure, move it into .c file for better readability and drop atmel_spi.h Cc: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-11spi: atmel: Remove nondm codeJagan Teki2-209/+0
atmel spi driver now accessible only when DM_SPI enabled. So, remove nondm code. Cc: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-11spi: atmel: Drop CONFIG_SYS_SPI_WRITE_TOUTJagan Teki2-5/+0
Drop CONFIG_SYS_SPI_WRITE_TOUT there is no code usage. Cc: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-11spi: fsl_dspi: Drop nondm codeJagan Teki1-132/+0
Drop the nondm code from fsl_dspi.c since there is no board or any other code using for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-11spi: Zap SOFT_SPI (non-dm)Jagan Teki3-176/+6
- Deadline for DM migration already passed by months. - Sent couple of zap patches and - No response on dm conversation hence removed the driver. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-06-11spi: mxs: Code cleanupJagan Teki1-19/+18
Order the macros, private structures and simple functions in a proper way to have more code readability. No functionality changed. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-11spi: mxs: Drop nondm codeJagan Teki2-129/+6
Deadline for DM migration already passed by months and no response on full dm conversation hence removed the nondm code. Note: Look like there is no user for nondm code for this driver. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2020-06-09Merge tag 'u-boot-imx-20200609' of ↵Tom Rini20-71/+132
https://gitlab.denx.de/u-boot/custodians/u-boot-imx Fixes for 2020.07 ----------------- - mx53: mx53menlo Convert to DM_ETH, fix fail boot - imx8mp_evk: fix boot issue - MX6, display5: fix environment - drop warnings (watchdog) for i.MX8mm i.mx8mp - enable bootaux for i.MX8M Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/695929999
2020-06-09Revert "imx: rom api: fix image offset computation"Stefano Babic1-1/+6
This reverts commit 1f63ee656698724bcdc4e711b4ccd267f6bf64ab. As reported by Ye Li on ML: 1. Removing the image_offset will break secondary (redundant) boot support for sd and emmc. 2. When booting from emmc boot partition, the image_offset is 0. But the flash.bin generated by mkimage with imximage-8mp-lpddr4.cfg is for sd. It expects to be burn at 32KB offset. The fit offset 0x60000 has already included the 32KB offset. So when you burn this flash.bin to emmc boot partition at offset 0, the fit offset should subtract the 32KB (0x60000 - 0x8000). Signed-off-by: Stefano Babic <sbabic@denx.de>
2020-06-08Prepare v2020.07-rc4v2020.07-rc4Tom Rini1-1/+1
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-06-08cmd: Correct the 'md.q' commandSimon Glass1-0/+1
This displays incorrect data at present due to a missing header file in display_options. Fix it. Fixes: 09140113108 ("command: Remove the cmd_tbl_t typedef") Signed-off-by: Simon Glass <sjg@chromium.org>
2020-06-08Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xxTom Rini87-86/+3111
- DM_ETH support for P2041RDB, T1024RDB, P5040DS, P3041DS, P4080DS, bug fixes - Add TBI PHY access through MII - DDR: Rework errata workaround for A008109, A008378, 009942
generated by cgit v1.1 at 2024-07-14 06:37:33 +0000