aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-02-07board: toradex: add verdin imx8m plus supportMarcel Ziswiler15-0/+3696
This adds initial support for the Toradex Verdin iMX8M Plus Quad 4GB WB IT V1.0B module. They are strapped to boot from eFuses which are factory fused to properly boot from their on-module eMMC. U-Boot supports booting from the on-module eMMC only, SDP support is disabled for now due to missing i.MX 8M Plus USB support. Functionality wise the following is known to be working: - eMMC, 8-bit and 4-bit MMC/SD card slots - Ethernet both on-module eQoS and FEC (requires PHY on carrier board) - GPIOs - I2C Boot sequence is: SPL ---> ATF (TF-A) ---> U-boot proper ATF, U-boot proper and u-boot.dtb images are packed into a FIT image, loaded by SPL. Boot: U-Boot SPL 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) Quad die, dual rank failed, attempting dual die, single rank configuration. Normal Boot WDT: Started watchdog@30280000 with servicing (60s timeout) Trying to boot from BOOTROM Find img info 0x&48025a00, size 872 Need continue download 1024 Download 779264, Total size 780424 NOTICE: BL31: v2.2(release):rel_imx_5.4.70_2.3.2_rc1-5-g835a8f67b NOTICE: BL31: Built : 16:52:37, Aug 26 2021 U-Boot 2022.04-rc1-00164-g21a0312611-dirty (Feb 07 2022 - 11:34:04 +0100) CPU: Freescale i.MX8MP[8] rev1.1 at 1200 MHz Reset cause: POR DRAM: 8 GiB Core: 78 devices, 18 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial Out: serial Err: serial Model: Toradex Verdin iMX8M Plus Quad 4GB Wi-Fi / BT IT V1.0B, Serial# 06817281 Carrier: Toradex Verdin Development Board V1.1A, Serial# 10807609 Setting variant to wifi Net: Hard-coding pdata->enetaddr eth1: ethernet@30be0000, eth0: ethernet@30bf0000 [PRIME] Hit any key to stop autoboot: 0 Verdin iMX8MP # Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05ARM: imx6: dh-imx6: Add update_sf script to install U-Boot into SFMarek Vasut1-0/+4
Add script to read U-Boot from SD card and write it to matching locations in the SPI NOR, thus making the SPI NOR bootable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05board: kontron: pitx-imx8m: Add Kontron pitx-imx8m board supportHeiko Thiery17-1/+5143
The Kontron pitx-imx8m is an NXP i.MX8MQ based board in the pITX form factor. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
2022-02-05mach-imx: iomux-v3: add a define for the SION bitAngus Ainslie1-0/+1
SION (Software Input On Field) - force the select mode input path Signed-off-by: Angus Ainslie <angus@akkea.ca>
2022-02-05arm: dts: imx8mq kernel dts updatesAngus Ainslie2-13/+238
Update to the 5.16 imx8mq dts files and dt bindings Changes since v1: Dropped rfkill.h that is not in linux mainline yet. Signed-off-by: Angus Ainslie <angus@akkea.ca> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05mx6: crm_regs: drop BM_ANADIG_ANA_MISC0_REFTOP_VBGADJDario Binacchi1-1/+0
Commit 97c16dc8bf098 ("imx: mx6ull: update the REFTOP_VBGADJ setting") made this macro unused. Then remove it. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05imx: mx6ull: fix REFTOP_VBGADJ settingDario Binacchi1-1/+3
The previous code wrote the contents of the fuse as is in the REFTOP_VBGADJ[2:0], but this was wrong if you consider the contents of the table in the code comment. This table is also different from the table in the commit description. But then, which of the two is correct? If it is assumed that an unprogrammed fuse has a value of 0 then for backward compatibility of the code REFTOP_VBGADJ[2:0] must be set to 6 (b'110). Therefore, the table in the code comment can be considered correct as well as this patch. Fixes: 97c16dc8bf098 ("imx: mx6ull: update the REFTOP_VBGADJ setting") Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
2022-02-05configs/*imxrt10*: remove [SPL_]CLK_COMPOSITE_CCFHeiko Thiery2-4/+0
This option is selected implicitly when [SPL_]CLK_IMXRT10{20|50} is selected. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2022-02-05clk: imx: select [SPL_]CLK_COMPOSITE_CCF for imxrt10{20|50}Heiko Thiery1-0/+4
The clock composite is required when using the clock framework. So select it automatically. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2022-02-05arm64: dts: imx8mm: Add the pcie supportRichard Zhu1-1/+32
Add the PCIe support on i.MX8MM platforms. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Marek Vasut <marex@denx.de> # Pick from Linux 854a4766ac12 ("arm64: dts: imx8mm: Add the pcie support")
2022-02-05arm64: dts: imx8mm: Add the pcie phy supportRichard Zhu1-0/+13
Add the PCIe PHY support on iMX8MM platforms. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Marek Vasut <marex@denx.de> # Pick from Linux b9ec888f636f ("arm64: dts: imx8mm: Add the pcie phy support")
2022-02-05dt-bindings: phy: phy-imx8-pcie: Add binding for the pad modes of imx8 pcie phyRichard Zhu1-0/+14
Add binding for reference clock PAD modes of the i.MX8 PCIe PHY. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1638432158-4119-2-git-send-email-hongxing.zhu@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Marek Vasut <marex@denx.de> # Pick from Linux f6f787874aa5 ("dt-bindings: phy: phy-imx8-pcie: Add binding for the pad modes of imx8 pcie phy")
2022-02-05imx: imx8mn_beacon: Remove redundant codeAdam Ford1-5/+0
The function to return the default MMC device for the environment already has a __weak instance doing exactly the same thing. Remove the superfluous one. Signed-off-by: Adam Ford <aford173@gmail.com>
2022-02-05imx: imx8mm_beacon: Remove redundant codeAdam Ford1-5/+0
The function to return the default MMC device for the environment already has a __weak instance doing exactly the same thing. Remove the superfluous one. Signed-off-by: Adam Ford <aford173@gmail.com>
2022-02-05imx: imx8qm_rm7720: adjust fdt_addrOliver Graute1-1/+1
The Linux Kernel Image size for arm64 is still growing. A Kernel with 54 MB at load address 0x80280000 overlaps with fdt_addr at 0x83000000. So let's increase it to 0x84000000 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
2022-02-05imx: imx8qm_rom7720: Increase CONFIG_SYS_BOOTM_LEN to 64MBOliver Graute1-0/+2
Increase CONFIG_SYS_BOOTM_LEN to 64MB Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
2022-02-05imx: imx8mn_beacon: Fix USB bootingAdam Ford2-0/+2
The i.MX8M Nano can boot over USB using the boot ROM instead of adding extra code to SPL to support USB drivers, etc. However, when booting from USB, the environment doesnt' know where to load and causes a hang. Fix this hang by supporting CONFIG_ENV_IS_NOWHERE=y. It only falls back to this condition when booting from USB, so it does not impact MMC booting. Suggested-by: Michael Nazzareno Trimarchi <michael@amarulasolutions.com> Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05arm: dts: add imx8mp-rsb3720-a1 dts fileYing-Chun Liu (PaulLiu)2-0/+966
Add board dts for Advantech's imx8mp-rsb3720-a1 Signed-off-by: Darren Huang <darren.huang@advantech.com.tw> Signed-off-by: Kevin12.Chen <Kevin12.Chen@advantech.com.tw> Signed-off-by: Phill.Liu <Phill.Liu@advantech.com.tw> Signed-off-by: Tim Liang <tim.liang@advantech.com.tw> Signed-off-by: wei.zeng <wei.zeng@advantech.com.cn> Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: uboot-imx <uboot-imx@nxp.com>
2022-02-05arm64: dts: imx8mm: Add missing MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_BMarek Vasut1-0/+1
The i.MX8M Mini Application Processor Reference Manual, Rev. 3, 11/2020 documents AF MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B , add it into the pinmux tables. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05arm64: dts: imx8mm/q: Fix pad control of SD1_DATA0Oliver Stäbler2-2/+2
Fix address of the pad control register (IOMUXC_SW_PAD_CTL_PAD_SD1_DATA0) for SD1_DATA0_GPIO2_IO2. This seems to be a typo but it leads to an exception when pinctrl is applied due to wrong memory address access. Signed-off-by: Oliver Stäbler <oliver.staebler@bytesatwork.ch> Reviewed-by: Fabio Estevam <festevam@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Fixes: c1c9d41319c3 ("dt-bindings: imx: Add pinctrl binding doc for imx8mm") Fixes: 748f908cc882 ("arm64: add basic DTS for i.MX8MQ") Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Marek Vasut <marex@denx.de> # Picked from Linux 5cfad4f45806f ("arm64: dts: imx8mm/q: Fix pad control of SD1_DATA0")
2022-02-05ARM: imx: imx8m: Add PLL 1.4 GHz, 1.5 GHz, 1.6 GHz, 1.8 GHz optionsMarek Vasut1-0/+20
Add PLL 1.4 GHz, 1.5 GHz, 1.6 GHz, 1.8 GHz options for iMX8M SoCs in case they should be operated faster, e.g. to improve boot time. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-02-05ARM: imx: imx8m: Align PLL 1.2 GHz option with LinuxMarek Vasut1-3/+3
Linux uses slightly different divider settings for the 1.2 GHz PLL configuration, adjust the coefficients to match Linux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2022-02-05regulator: bd718x7: Bypass bogus warningsMarek Vasut1-33/+36
When regulator consumer attempts to set enabled DVS regulator voltage, the driver aborts with "Only DVS bucks can be changed when enabled". In case the regulator is already set to specified voltage, do nothing instead of failing outright. When regulator consumer attempts to set enables regulator which cannot be controlled because it is already always enabled, the driver aborts with -EINVAL. Again, do nothing in such case and return 0, because the request is really fulfilled, the regulator is enabled. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
2022-02-05imx8m: lock id_swap_bypass bit in tzc380 enableAndrey Zhizhikin2-3/+18
According to TRM for i.MX8M Nano and Plus, GPR10 register contains lock bit for TZASC_ID_SWAP_BYPASS bit. This bit is required to be set in order to avoid AXI bus errors when GPU is enabled on the platform. TZASC_ID_SWAP_BYPASS bit is alread set for all imx8m applicable derivatives, but is missing a lock settings to be applied. Set the TZASC_ID_SWAP_BYPASS_LOCK bit for those derivatives which have it implemented. Since we're here, provide also names to bits from TRM instead of using BIT() macro in the code. Fixes: deca6cfbf5d7 ("imx8mn: set BYPASS ID SWAP to avoid AXI bus errors") Fixes: a07c7181296f ("imx8mp: set BYPASS ID SWAP to avoid AXI bus errors") Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Cc: Peng Fan <peng.fan@nxp.com>
2022-02-05imx: imx8mn_beacon: Enable TrustZoneAdam Ford1-0/+2
When the board was added, enabling tzc380 was left off by mistake. Signed-off-by: Adam Ford <aford173@gmail.com>
2022-02-05imx: imx8mm_beacon: Enable USBAdam Ford2-0/+17
With the updated device tree's having USB support, enable in U-Boot. This also requires the addition of the imx8m power domain, since the USB is gated by the power domain controller. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05arm: dts: imx8mm-beacon: Resync dtsi with Kernel 5.17-rc1Adam Ford2-4/+39
Resync the SOM and baseboar files with the device trees that will be included in 5.17-RC1 when it's cut. This will improve pinmuxing for USDHC1 and add USB functionality. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05smegw01: Update DDR initializationFabio Estevam1-16/+39
Sync with the latest DDR initialization from Phytec, which uses version 1.2 of NXP's i.MX7D DRAM Register Programming Aid spreadsheet. This updated DDR initialization fixes occasional system freeze. Signed-off-by: Fabio Estevam <festevam@denx.de>
2022-02-05imx8mn-ddr4-evk: generate single bootable imageAndrey Zhizhikin3-3/+19
As suggested in commit 028abfd9b157 ("imx8mm-evk: Generate a single bootable flash.bin again") for imx8mm_evk, it is possible to produce single bootable image via binman. This restores the original behavior in distros, where only one boot container is used to create target image. Perform similar adaptions in order to provide single bootable image for imx8mn-ddr4-evk derivate. Update documentation to drop additional step of copying u-boot.itb Fixes: 353dfe4b4359 ("imx8mn-ddr4-evk: switch to use binman") Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05imx: ventana: correct splashimage load addressAndrey Zhizhikin1-1/+1
Commit 72d81360aabd ("global: Convert CONFIG_LOADADDR to CONFIG_SYS_LOADADDR") dropped the usage of LOADADDR and replaced it with SYS_LOADADDR. Use the correct macro in environment by replacing CONFIG_LOADADDR with CONFIG_SYS_LOADADDR. Fixes: d75ebf3482c3 ("imx: ventana: fix splash logo drawing") Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Cc: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Acked-By: Tim Harvey <tharvey@gateworks.com>
2022-02-05imx8mq_evk: configs: add/cleanup variables for distro bootAndrey Zhizhikin1-4/+4
Add fdt_addr_r fdtfile which used by distro boot, and cleanup legacy environment variables. Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
2022-02-05arm64: dts: imx8mq-u-boot.dtsi: improve odd blob-ext namingPatrick Wildt1-13/+21
Rather than using odd implicit blob-ext naming, explicitly specify the type to be of blob-ext and therefore also simplify the node naming. Signed-off-by: Patrick Wildt <patrick@blueri.se> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-02-05arm64: dts: imx8mm-u-boot.dtsi: use dash for node namesPatrick Wildt1-6/+6
Some of the nodes were named using a underscore, so rectify this and consistenly use dashes. Signed-off-by: Patrick Wildt <patrick@blueri.se> Reviewed-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
2022-02-05arm64: dts: imx8mq-u-boot.dtsi: explicitly add spl filenamePatrick Wildt1-0/+1
Explicitly add SPL aka u-boot-spl.bin filename. Signed-off-by: Patrick Wildt <patrick@blueri.se> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-02-05arm64: dts: imx8mq-u-boot.dtsi: alphabetically re-order propertiesPatrick Wildt1-12/+12
Alphabetically re-order properties. Signed-off-by: Patrick Wildt <patrick@blueri.se> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-02-05doc: verdin-imx8mm: Remove ATF_LOAD_ADDR exportFabio Estevam1-1/+0
imx8mm-u-boot.dtsi passes the ATF load address via the 'entry' and 'load' properties. Remove the step that performs the ATF_LOAD_ADDR export, which is now unneeded. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Patrick Wildt <patrick@blueri.se>
2022-02-05doc: sl-mx8mm: Remove ATF_LOAD_ADDR exportFabio Estevam1-1/+0
imx8mm-u-boot.dtsi passes the ATF load address via the 'entry' and 'load' properties. Remove the step that performs the ATF_LOAD_ADDR export, which is now unneeded. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Patrick Wildt <patrick@blueri.se>
2022-02-05doc: imx8mm_evk: Remove ATF_LOAD_ADDR exportFabio Estevam1-1/+0
imx8mm-u-boot.dtsi passes the ATF load address via the 'entry' and 'load' properties. Remove the step that performs the ATF_LOAD_ADDR export, which is now unneeded. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Patrick Wildt <patrick@blueri.se>
2022-02-05imx: imx8mm: imx8mm-kontron-n801x-s: add common board u-boot.dtsiHeiko Thiery3-123/+135
When using a board variant that selects the lvds specific dtb the *.u-boot.dtsi file will not be included. To have a lvds dtb specific u-boot.dtsi file move this part to a common board u-boot.dtsi file and include this in the board base u-boot.dtsi and create an additional one for the lvds variant. Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2022-02-05imx: imx8mm: imx8mm-kontron-n801x-s: convert options to KconfigHeiko Thiery1-0/+2
CONFIG_SPL_MMC and CONFIG_SPL_SERIAL Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2022-02-05cmd: bcb: fix bcb struct alignment issueGary Bisson1-1/+2
Without this patch the bcb struct could be located at an odd address which resulted in data not being copied to the buffer. Here was the repro steps (from Mattijs): => mmc dev 1 => bcb load 1 misc => bcb dump command 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 => part start mmc 1 misc misc_start => mmc read ${loadaddr} ${misc_start} 4 => bcb load 1 misc => bcb dump command 00000000: 62 6f 6f 74 6f 6e 63 65 2d 62 6f 6f 74 6c 6f 61 00000010: 64 65 72 00 00 00 00 00 00 00 00 00 00 00 00 00 This behavior was observed on an Amlogic A311D (ARM64) platform with a recent GCC toolchain (11.2.0) but is most likely affecting other platforms. To avoid issues the structure is aligned on DMA minimum alignment value as it is passed directly to the read function. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # on khadas vim3
2022-02-05configs: imx8mm-cl-iot-gate: update dfu_alt_info for single flash.binYing-Chun Liu (PaulLiu)1-2/+1
We changed to single flash.bin now. So dfu_alt_info should be modified to reflect this change. Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05cmd_nandbcb: Support secondary boot address of imx8mnMichael Trimarchi1-2/+38
Add support of secondary boot address for imx8mn. The secondary boot address is hardcoded in the fuse. The value is calculated from there according to the following description: The fuse IMG_CNTN_SET1_OFFSET (0x490[22:19]) is defined as follows: - Secondary boot is disabled if fuse value is bigger than 10, n = fuse value bigger than 10. - n == 0: Offset = 4MB - n == 2: Offset = 1MB - Others & n <= 10 : Offset = 1MB*2^n - For FlexSPI boot, the valid values are: 0, 1, 2, 3, 4, 5, 6, and 7. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
2022-02-05imx: Enable ACTLR.SMP in SPL for i.MX6/7Sven Schwermer5-1/+14
Similar to what has been done before with c5437e5b for u-boot proper, we enable the SMP bit for SPL as well. This is necessary when SDP booting straight into Linux, i.e. falcon boot. When SDP boot mode is active, the ROM code does not set this bit which makes the caches not work once activated in Linux. On an i.MX6ULL (528MHz), this reduces a minimal kernel's boot time into an initramfs shell from ~6.1s down to ~1.2s. Signed-off-by: Sven Schwermer <sven@svenschwermer.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05Makefile: imx: Do not call arch/arm/mach-imx flash.bin generation if BINMAN ↵Marek Vasut1-1/+0
enabled Skip running arch/arm/mach-imx flash.bin generation in case BINMAN is enabled, otherwise the target in arch/arm/mach-imx/Makefile regenerates the flash.bin again and produces corrupted result. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Peng Fan <peng.fan@oss.nxp.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-02-05ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12Marek Vasut4-79/+1078
Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12"). There is no functional change to the resulting DTs. The imx6qdl-dhcom-pdk2.dtsi had to be adjusted with additional headers, gpio.h, pwm.h, input.h, else the DT cannot be compiled, the same change is likely necessary in Linux. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05ARM: dts: imx: Add labels to remaining anatop regulatorsMarek Vasut1-3/+3
Add labels to remaining anatop regulators, so their supplies can be assigned in board DTs. This is similar to Linux kernel commit 93385546ba369 ("ARM: dts: imx6qdl-sabresd: Assign corresponding power supply for LDOs") except it does not contain the unrelated sabresd changes. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2022-02-05arm: dts: Enable support for USB on XEA (imx28) boardLukasz Majewski1-0/+18
This change enables the support for USB with DM on the XEA (imx28) board. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2022-02-05arm: xea: config: Provide special defconfig for a single binary u-bootLukasz Majewski2-0/+113
The new configs/imx28_xea_sb_defconfig is introduced to facilitate building the single binary u-boot.sb fox XEA board. The biggest distinction from "normal" XEA imx28_xea_sb_defconfig is support for USB mass storage devices (pen drives). To achieve that, the CONFIG_DM_USB is enabled and supported. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2022-02-05xea: dts: Update the SPI-NOR flash memory partitions descriptionLukasz Majewski1-21/+34
Now the dts information corresponds to the one available in the kernel. With this patch applied the 'mtd list' shows proper names and offsets for MTD partitions. Signed-off-by: Lukasz Majewski <lukma@denx.de>
generated by cgit v1.1 at 2024-07-14 06:29:46 +0000