aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-03-18Convert CONFIG_ETHPRIME to KconfigTom Rini297-154/+458
This converts the following to Kconfig: CONFIG_ETHPRIME This is also done by adding a gating Kconfig option, CONFIG_USE_ETHPRIME similar to other options that are not always set and control environment variables. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18Remove CONFIG_HAS_ETH0 et al symbolsTom Rini16-52/+0
This converts removes the following symbols: CONFIG_HAS_ETH0 CONFIG_HAS_ETH1 CONFIG_HAS_ETH2 CONFIG_HAS_ETH3 This is because at this point, only the ids8313 platform was using the code which was controlled by these symbols. In turn, this code already performs error checking on being able to perform the device tree fixup. Rather than convert these to Kconfig for a single platform, update the code to not need these checks and remove them from all the platforms they were unused on. Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18Convert CONFIG_NFS_TIMEOUT to KconfigTom Rini5-16/+12
This converts the following to Kconfig: CONFIG_NFS_TIMEOUT Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18Convert CONFIG_BOOT_RETRY_TIME et al to KconfigTom Rini30-52/+90
This converts the following to Kconfig: CONFIG_BOOT_RETRY_TIME CONFIG_BOOT_RETRY_MIN CONFIG_RESET_TO_RETRY We also introduce CONFIG_BOOT_RETRY to gate these options, and clean up the associated Makefile entry and C code for picking default values of CONFIG_BOOT_RETRY_MIN. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18powerpc: Move CONFIG_BPTR_VIRT_ADDR out of CONFIG namespaceTom Rini2-6/+4
This is only used in one file, and is never overridden. Move this out of CONFIG namespace. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18Convert CONFIG_NET_RETRY_COUNT to KconfigTom Rini143-115/+117
This converts the following to Kconfig: CONFIG_NET_RETRY_COUNT Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18Convert CONFIG_ARP_TIMEOUT to KconfigTom Rini82-51/+61
This converts the following to Kconfig: CONFIG_ARP_TIMEOUT Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18Convert CONFIG_A008044_WORKAROUND to KconfigTom Rini3-10/+7
This converts the following to Kconfig: CONFIG_A008044_WORKAROUND Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18Convert CONFIG_A003399_NOR_WORKAROUND to KconfigTom Rini3-10/+7
This converts the following to Kconfig: CONFIG_A003399_NOR_WORKAROUND Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18Convert CONFIG_ARMV8_SWITCH_TO_EL1 to KconfigTom Rini3-4/+6
This converts the following to Kconfig: CONFIG_ARMV8_SWITCH_TO_EL1 Cc: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> Cc: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2022-03-18Convert CONFIG_ARMV7_SECURE_BASE et al to KconfigTom Rini24-54/+41
This converts the following to Kconfig: CONFIG_ARMV7_SECURE_BASE CONFIG_ARMV7_SECURE_MAX_SIZE CONFIG_ARMV7_SECURE_RESERVE_SIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18configs: Re-run migrationsTom Rini14-56/+15
As the CI test for stopping platforms from being merged that were defining symbols that had Kconfig entries, a small number of symbols needed to be migrated again. Do so, and catch two cases the README should also have been updated but was not. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18Revert "efi: Allow easy selection of serial-only operation"Tom Rini1-25/+0
This commit re-introduced a migrated CONFIG symbol to the board header file. These changes should likely be handled via documentation instead, as well. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-18sunxi: Do not define CONFIG_SPL_STACK_ADDR_RTom Rini1-11/+0
We cannot define a CONFIG value here to ensure that the Kconfig value isn't set wrong. Fixes: 2c699fe0d34d ("configs: sunxi: Add common SUNIV header") Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18CI: Fix unmigrated symbol testTom Rini2-2/+2
When calling comm to compare the CONFIG symbols a defconfig uses with the symbols that have been migrated, we need to suppress all output as the summary line will have everything we need. Failure to do this leads to the test blowing up, but in non-fatal ways. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-16Merge tag 'xilinx-for-v2022.07-rc1' of ↵WIP/16Mar2022-nextTom Rini47-124/+2410
https://source.denx.de/u-boot/custodians/u-boot-microblaze into next Xilinx changes for v2022.07-rc1 microblaze: - Add support for reserved memory xilinx: - Update FRU code with MAC reading zynqmp: - Remove double AMS setting - DT updates (mostly for SOMs) - Add support for zcu106 rev 1.0 zynq: - Update nand binding nand: - Aligned zynq_nand to upstream DT binding net: - Add support for ethernet-phy-id mmc: - Workaround CD in zynq_sdhci driver also for ZynqMP - Add support for dynamic/run-time SD config for SOMs gpio: - Add driver for slg7xl45106 firmware: - Add support for dynamic SD config power-domain: - Update zynqmp driver with the latest firmware video: - Add skeleton driver for DP and DPDMA i2c: - Fix i2c to work with QEMU pinctrl: - Add driver for zynqmp pinctrl driver
2022-03-16arm64: zynqmp: Add pinctrl emmc description to SM-K26Michal Simek1-0/+20
Production SOM has emmc on it and make sense to describe pin description to be able use EMMC if it is not configured via psu_init. (Still some regs are not handled but this is one step in that direction) Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/3545a0f08d342de98efc82b78f5725eda091555a.1647267969.git.michal.simek@xilinx.com
2022-03-16Merge branch '2022-03-15-add-erofs-support' into nextTom Rini28-218/+3272
- Add erofs support
2022-03-15test/py: Add tests for the erofsWIP/2022-03-15-add-erofs-supportHuang Jianan4-0/+214
Add Python scripts to test 'ls' and 'load' commands, as well as test related filesystem functions. Signed-off-by: Huang Jianan <jnhuang95@gmail.com>
2022-03-15fs/erofs: add filesystem commandsHuang Jianan4-0/+50
Add 'ls' and 'load' commands. Signed-off-by: Huang Jianan <jnhuang95@gmail.com>
2022-03-15fs/erofs: add lz4 decompression supportHuang Jianan7-3/+805
Support EROFS lz4 compressed files. Signed-off-by: Huang Jianan <jnhuang95@gmail.com>
2022-03-15lib/lz4: update LZ4 decompressor moduleHuang Jianan3-215/+536
Update the LZ4 compression module based on LZ4 v1.8.3 in order to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested. Signed-off-by: Huang Jianan <jnhuang95@gmail.com>
2022-03-15fs/erofs: add erofs filesystem supportHuang Jianan14-0/+1667
This patch mainly deals with uncompressed files. Signed-off-by: Huang Jianan <jnhuang95@gmail.com>
2022-03-15CI, Docker: Update to latest focal tagTom Rini3-3/+3
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-14Merge tag 'v2022.04-rc4' into nextTom Rini95-581/+2237
Prepare v2022.04-rc4
2022-03-14Prepare v2022.04-rc4v2022.04-rc4Tom Rini1-1/+1
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-14Merge branch '2022-03-14-regression-fixes'Tom Rini5-65/+101
- Regression fixes for RK3399 eMMC, j721e Sierra SerDes driver, vexpress64 autoboot and tbs2910 image size
2022-03-14board: tbs2910: Enable Link Time Optimizations in defconfigWIP/2022-03-14-regression-fixesSoeren Moch1-0/+1
This saves about 12 kBytes image size and helps to stay within the size limit. Suggested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Soeren Moch <smoch@web.de>
2022-03-14vexpress64: fvp: Fix automatic bootAndre Przywara1-1/+1
Commit 90f262a6951f ("vexpress64: Clean up BASE_FVP boot configuration") cleaned up the usage of default address variables, but missed to update the address for the kernel in the FVP's bootcmd definition. Change ${kernel_addr} to read ${kernel_addr_r} to bring back the automated boot for the fastmodel. Also use "setenv" instead of the potentially ambiguous "set" on the way. Fixes: 90f262a6951f ("vexpress64: Clean up BASE_FVP boot configuration") Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2022-03-14board: ti: j721e: evm.c: Fix the probing of in Sierra SerDes0Aswath Govindraju1-15/+13
Initialization and power on operations of links have been moved under the link device in the Sierra SerDes driver. Also, the UCLASS of sierra_phy_provider has been changed to UCLASS_MISC. Therefore, fix the probing of SerDes0 instance accordingly. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Reviewed-by: Georgi Vlaev <g-vlaev@ti.com>
2022-03-14phy: cadence: Sierra: Move the link operations from serdes phy to link deviceAswath Govindraju1-39/+20
In commit 6f46c7441a9f ("phy: cadence: Sierra: Add a UCLASS_PHY device for links"), a separate udevice of type UCLASS_PHY was created for each link. Therefore, move the corresponding link operations under the link device. Also, change the uclass of sierra phy to UCLASS_MISC as it is no longer the phy device. Fixes: 6f46c7441a9f ("phy: cadence: Sierra: Add a UCLASS_PHY device for links") Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Reviewed-by: Georgi Vlaev <g-vlaev@ti.com>
2022-03-14rockchip: sdhci: Fix RK3399 eMMC PHY power cyclingAlper Nebi Yasak1-10/+66
The Rockchip RK3399 eMMC PHY has to be power-cycled while changing its clock speed to some higher speeds. This is dependent on the desired SDHCI clock speed, and it looks like the PHY should be powered off while setting the SDHCI clock in these cases. Commit ac804143cfd1 ("mmc: rockchip_sdhci: add phy and clock config for rk3399") attempts to do this in the set_ios_post() hook by setting the SDHCI clock once more while the PHY is turned off/on as necessary, as the SDHCI framework does not provide a way to override how it sets its clock. However, the commit breaks reinitializing the eMMC on a few boards including chromebook_kevin and reportedly ROCKPro64. This patch reworks the power cycling to utilize the SDHCI framework slightly better (using the set_control_reg() hook to power off the PHY and set_ios_post() hook to power it back on) which happens to fix the issue, at least on a chromebook_kevin. Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-03-14Merge https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini3-6/+39
- kwboot: Misc minor improvement and fixes, e.g. mix of arguments (Pali) - PCI: a37xx: Remap IO space to bus address 0x0 (Pali)
2022-03-14Merge https://source.denx.de/u-boot/custodians/u-boot-x86Tom Rini2-3/+9
- Trivial fixes for x86
2022-03-14arm64: zynqmp: Fix i2c addresses for zynqmp-p-a2197Michal Simek1-4/+4
After double checking some i2c addresses are not correct. It is visible from i2c dump ZynqMP> i2c bus Bus 3: i2c@ff020000 74: i2c-mux@74, offset len 1, flags 0 Bus 5: i2c@ff020000->i2c-mux@74->i2c@0 Bus 6: i2c@ff020000->i2c-mux@74->i2c@2 Bus 7: i2c@ff020000->i2c-mux@74->i2c@1 Bus 8: i2c@ff020000->i2c-mux@74->i2c@3 Bus 4: i2c@ff030000 (active 4) 74: i2c-mux@74, offset len 1, flags 0 Bus 9: i2c@ff030000->i2c-mux@74->i2c@0 Bus 10: i2c@ff030000->i2c-mux@74->i2c@3 Bus 11: i2c@ff030000->i2c-mux@74->i2c@4 Bus 12: i2c@ff030000->i2c-mux@74->i2c@5 (active 12) 51: generic_51, offset len 1, flags 0 60: generic_60, offset len 1, flags 0 74: generic_74, offset len 1, flags 0 Bus 13: i2c@ff030000->i2c-mux@74->i2c@6 (active 13) 51: generic_51, offset len 1, flags 0 5d: generic_5d, offset len 1, flags 0 74: generic_74, offset len 1, flags 0 ZynqMP> i2c dev 4 Setting bus to 4 ZynqMP> i2c mw 74 0 18 ZynqMP> i2c probe Valid chip addresses: 18 36 37 50 51 60 74 ZynqMP> i2c mw 74 0 20 ZynqMP> i2c probe Valid chip addresses: 51 60 74 where it is clear that si570 (u5) is at 0x60 address and 8t49n240 (u39) is also at address 0x60 based on log above. i2c address 0x74 is i2c mux and 0x51 is eeprom. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/0a198e9d993411e41473d130d5a5c20b6dc83458.1646639616.git.michal.simek@xilinx.com
2022-03-14pinctrl: zynqmp: Add pinctrl driverAshok Reddy Soma5-0/+699
Add pinctrl driver for Xilinx ZynqMP SOC. This driver is compatible with linux device tree parameters for configuring pinmux and pinconf. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/2d7eefa83c8c0129f7243a25de56a289e948f6c6.1645626183.git.michal.simek@xilinx.com
2022-03-14pinctrl: Increase length of pinmux status bufferAshok Reddy Soma1-1/+1
Xilinx ZynqMP SOC can set 6 parameters for its pins. pinmux status command will print the status of these parameters for each pin. But current print buffer length is only 40 characters long, increase it to 80 to print all the parameters. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/3a6be84c8354f38754a9838670cc0319e84f29e8.1645626183.git.michal.simek@xilinx.com
2022-03-14cmd: test: pinmux: Do not check all empty spacesMichal Simek1-4/+4
There is really no value to check empty spaces. That's why use ut_assert_nextlinen() instead of ut_assert_nextline(). This change ensures that PINMUX_SIZE can be increased without changing tests. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/03aecf4c67ec8d72bf2a90baf1516fc5bd300fe0.1646668094.git.michal.simek@xilinx.com
2022-03-14Merge branch '2022-03-10-platform-updates' into nextTom Rini36-402/+962
- Assorted TI omap3, j7 platform updates - Phytium Pomelo board
2022-03-14arm: a37xx: Remap IO space to bus address 0x0Pali Rohár2-2/+7
Remap PCI I/O space to the bus address 0x0 in the Armada 37xx device-tree in order to support legacy I/O port based cards which have hardcoded I/O ports in low address space. Some legacy PCI I/O based cards do not support 32-bit I/O addressing. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-03-14tools: kwboot: Allow to mix positional arguments with option -bPali Rohár1-4/+14
Commit 9e6d71d2b55f ("tools: kwboot: Allow to use -b without image path as the last getopt() option") broke usage of kwboot with following arguments: kwboot -t -B 115200 /dev/ttyUSB0 -b u-boot-spl.kwb Fix parsing of option -b with optional argument again. Fixes: 9e6d71d2b55f ("tools: kwboot: Allow to use -b without image path as the last getopt() option") Signed-off-by: Pali Rohár <pali@kernel.org> Reported-by: Tony Dinh <mibodhi@gmail.com> Tested-by: Tony Dinh <mibodhi at gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-03-14tools: kwboot: Check if baudrate value is supported before sending imagePali Rohár1-1/+13
Call kwboot_open_tty() which baudrate value which was specified at the command line by option -B. This function returns error if baudrate is not supported by selected tty device. Initial baudrate for image transfer is always 115200, so call kwboot_tty_change_baudrate() with value 115200 immediately after kwboot_open_tty() if baudrate specified by option -B is different than 115200. This makes kwboot fail immediately, informing that baudrate is unsupported, instead of failing only after the first part of image is already sent. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-03-14tools: kwboot: Allow to specify custom baudrate only in supported operationsPali Rohár1-0/+6
Custom baudrate different than 115200 may be specified only when kwboot is not going to send boot/debug message pattern or when it is going to send boot message pattern with image file (in which case baudrate change happens after sending kwbimage header). BootROM detects boot/debug message pattern only at baudrate 115200. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-03-14x86: Correct the coreboot header file in MAINTAINERSSimon Glass1-2/+2
This board has its own config header file. Correct it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2022-03-14x86: Add an enum name for the GNVS firmware typeSimon Glass1-1/+7
This enum is currently anonymous. Add a name so it can be used in the code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2022-03-13Merge tag 'efi-2022-04-rc3-2' of ↵WIP/13Mar2022Tom Rini6-17/+24
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2022-04-rc3-2 Documentation: * Fix description for SiFive Unmatched * Add libgnutls28-dev to build dependencies UEFI * Avoid possibly invalid GUID pointers for protocol interfaces Other * Serial console support for cls command
2022-03-12Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-spiWIP/12Mar2022Tom Rini23-26/+662
- sunXi SPI fixups (Andre) - bcm iproc qspi (Rayagonda)
2022-03-12efi_loader: copy GUID in InstallProtocolInterface()Heinrich Schuchardt3-9/+9
InstallProtocolInterface() is called with a pointer to the protocol GUID. There is not guarantee that the memory used by the caller for the protocol GUID stays allocated. To play it safe the GUID should be copied to U-Boot's internal structures. Reported-by: Joerie de Gram <j.de.gram@gmail.com> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-12doc: add libgnutls28-dev to build dependenciesHeinrich Schuchardt1-5/+6
mkeficapsule requires package libgnutls28-dev for building Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2022-03-12doc: path to u-boot-spl.bin on SiFive Unmatched boardHeinrich Schuchardt1-1/+1
u-boot-spl.bin is built in spl/. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
generated by cgit v1.1 at 2024-07-13 01:45:09 +0000