aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-05-10Merge patch series "Add AM64x Support to PRUSS and PRU_RPROC driver"WIP/10May2024-nextTom Rini2-2/+8
MD Danish Anwar <danishanwar@ti.com> says: This series adds AM64x related compatibles to PRUSS and PRU_RPROC drivers. This series is a prerequisite for ICSSG Ethernet driver. Once Support for AM64x is added to PRUSS and PRU_RPROC driver, I'll send another series to enable ICSSG Ethernet driver for AM64x as well.
2024-05-10soc: ti: pruss: Add support for AM64xMD Danish Anwar1-0/+1
Add support for AM64x by adding it's compatible in pruss driver. Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org>
2024-05-10remoteproc: pru: Add support for AM64x PRU / RTU coresMD Danish Anwar1-2/+7
Add support for AM64x PRU cores by adding compatibles for AM64x. Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org>
2024-05-10Merge patch series "Generate all SR boot binaries"Tom Rini2-2/+183
Neha Malcom Francis <n-francis@ti.com> says: Add support for missing HS SRs in the build for J721E and J7200. Boot logs (updated for v2): https://gist.github.com/nehamalcom/e652752623537aced8cf31308015d7c9
2024-05-10arm: dts: k3-j7200-binman: Add support for HSSE1.0 and HSFS1.0Neha Malcom Francis1-1/+94
J7200 has SR1.0 and SR2.0 having three variants of each GP, HS-FS and HS-SE. Current build does not generate HS-SE SR1.0 and HS-FS SR1.0 so add support for them. Reported-by: Suman Anna <s-anna@ti.com> Reported-by: Aniket Limaye <a-limaye@ti.com> Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Andrew Davis <afd@ti.com>
2024-05-10arm: dts: k3-j721e-binman: Add support for HSFS1.1Neha Malcom Francis1-1/+89
J721E has SR1.1 and SR2.0 having three variants of each GP, HS-FS and HS-SE. Current build does not generate HS-FS SR1.1 so add support for them. Reported-by: Suman Anna <s-anna@ti.com> Signed-off-by: Neha Malcom Francis <n-francis@ti.com> Reviewed-by: Andrew Davis <afd@ti.com>
2024-05-10Merge patch series "*** Commonize board code for K3 based SoMs ***"Tom Rini5-67/+78
Wadim Egorov <w.egorov@phytec.de> says: Factor out code that we can reuse across all our K3 based SoMs. 2nd patch of this series require patch [1] to be applied first. [1] https://lists.denx.de/pipermail/u-boot/2024-April/552021.html
2024-05-10phycore_am64x_a53_defconfig: Enable CONFIG_BOARD_LATE_INITWadim Egorov1-0/+1
Enable CONFIG_BOARD_LATE_INIT to use PHYTECs common board_late_init() to set handy environment variables for u-boot. Also, resync after savedefconfig. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
2024-05-10board: phytec: Commonize board code for K3 based SoMsWadim Egorov4-67/+77
Environment handling code can be reused across all our K3 based SoMs. Instead of adding the same code for every new SoM, move it to a common board.c file. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
2024-05-10arm: mach-k3: am642: Provide a way to obtain boot device for non SPLsWadim Egorov4-91/+109
Let's provide get_boot_device() for AM64, similar to what we did in commit 2f9095e2bf59 ("arm: mach-k3: am625: Provide a way to obtain boot device for non SPLs") for AM62. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
2024-05-10Merge patch series "binman: ti: create binman nodes for EFI capsules"Tom Rini10-0/+291
Jonathan Humphreys <j-humphreys@ti.com> says: Add binman nodes for EFI capsules of firmware components so that capsules are automatically created during the UBoot builds. This is enabled for several TI SoC based platforms: AM64, AM62, AM62p, BeaglePlay, J7, and BeagleboneAI.
2024-05-10dts: beagleboneai64: binman: Include firmware capsules binman nodesJonathan Humphreys2-0/+52
Fill in the BeagleBoneAI64's capsule GUID properties of the base binman capsule nodes. Also add it's SYSFW binman capsule node. Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
2024-05-10dts: am62x: binman: Include firmware capsules binman nodesJonathan Humphreys1-0/+30
Fill in the am62x SK's capsule GUID properties of the base binman capsule nodes. Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
2024-05-10dts: am62px: binman: Include firmware capsules binman nodesJonathan Humphreys1-0/+29
Fill in the am62px SK's capsule GUID properties of the base binman capsule nodes. Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
2024-05-10dts: beagleplay: binman: Include firmware capsules binman nodesJonathan Humphreys2-0/+42
Fill in the BeaglePlay's capsule GUID properties of the base binman capsule nodes. Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
2024-05-10dts: j721e: binman: Include firmware capsules binman nodesJonathan Humphreys1-0/+49
Fill in the J721e SK's capsule GUID properties of the base binman capsule nodes. Also add it's SYSFW binman capsule node. Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
2024-05-10dts: am64x: binman: Include firmware capsules binman nodesJonathan Humphreys1-0/+30
Fill in the am64x SK's capsule GUID properties of the base binman capsule nodes. Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
2024-05-10dts: ti: binman: Add base K3 firmware capsule nodesJonathan Humphreys2-0/+59
Create capsule files for tiboot3.bin, tispl.bin, and u-boot.img. Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
2024-05-08test/py: Make the number of SPL banners seen a variableWIP/08May2024-nextTom Rini1-11/+4
Currently we have the option to tell the console code that we should ignore the SPL banner. We also have an option to say that we can see it a second time, and ignore it. However, some platforms such as TI AM64x will have us see the SPL banner three times. Rather than add an "spl3_skipped" option, rework the code. By default we expect to see the banner once, but boards can specify seeing it as many times as they expect to. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-08net: Add drivers for Sysnopsys Ethernet 10G deviceBoon Khai Ng5-0/+1709
This driver support the Synopsys Designware Ethernet 10G IP block refer from the driver dwc_eth_qos. The driver MAC register mapping is different between Synopsys QoS IP and Synopsys 10G IP, and thus new file is created meant for Sysnopsys 10G IP. The dwc_eth_xgmac_socfpga.c is specific to a device family, the driver support the specific configuration used in Intel SoC FPGA Agilex5. This driver is extensible for other device family to use. Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
2024-05-07Merge patch series "arm: Add Analog Devices SC5xx Machine Type"WIP/07May2024-nextTom Rini43-0/+5027
Greg Malysa <greg.malysa@timesys.com> says: This series adds support for the ADI SC5xx machine type and includes two core drivers that are required for being able to boot any board--a UART driver, the gptimer driver which is used as a clock reference (CNTVCNT is not supported on the armv7 sc5xx SoCs) and the clock tree driver. Our corresponding Linux support relies on u-boot configuring the clocks correctly before booting, so it is not possible to boot any board without the CGU/CDU configuration happening here. There are also no board files, device trees, or defconfigs included here, but some common definitions that will be used to build board files currently are. The sc5xx SoCs themselves include many armv7 families (sc57x, sc58x, and sc594) all using an ARM Cortex-A5, and one armv8 family (sc598) indended to be a drop-in replacement for the SC594 in terms of peripherals, with a Cortex-A55 instead. Some of the configuration code in dmcinit and clkinit is quite scary and causes a lot of checkpatch violations. It is modified from code initially provided by ADI, but it has not been fully rewritten. There's a question of how important it is to clean up this code--it has some quality violations, but it has been in use (including in production) for over two years and is known to work for performing the low level SoC initialization, while a rewrite might introduce timing or sequence bugs that could take a significant amount of time to detect in the future.
2024-05-07drivers: timer: Add in driver support for ADI SC5XX-family GP timer peripheralGreg Malysa4-0/+155
Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Co-developed-by: Angelo Dureghello <angelo.dureghello@timesys.com> Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com> Co-developed-by: Ian Roberts <ian.roberts@timesys.com> Signed-off-by: Ian Roberts <ian.roberts@timesys.com> Signed-off-by: Greg Malysa <greg.malysa@timesys.com>
2024-05-07drivers: serial: Add in UART for ADI SC5XX-family processorsNathan Barrett-Morrison3-0/+227
Co-developed-by: Greg Malysa <greg.malysa@timesys.com> Signed-off-by: Greg Malysa <greg.malysa@timesys.com> Co-developed-by: Ian Roberts <ian.roberts@timesys.com> Signed-off-by: Ian Roberts <ian.roberts@timesys.com> Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas@analog.com> Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com> Signed-off-by: Arturs Artamonovs <arturs.artamonovs@analog.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
2024-05-07drivers: clk: adi: Add in SC5XX-family clock driverNathan Barrett-Morrison13-0/+1604
This adds support for the SC5XX clock trees which are required for reading clock speeds on the SoCs. This is largely a port of the same support for Linux, which has not yet been submitted upstream. Co-developed-by: Greg Malysa <greg.malysa@timesys.com> Signed-off-by: Greg Malysa <greg.malysa@timesys.com> Co-developed-by: Ian Roberts <ian.roberts@timesys.com> Signed-off-by: Ian Roberts <ian.roberts@timesys.com> Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas@analog.com> Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com> Signed-off-by: Arturs Artamonovs <arturs.artamonovs@analog.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
2024-05-07arch: arm: Add Analog Devices SC5xx machine typeNathan Barrett-Morrison26-0/+3041
Add support for the SC5xx machine type from Analog Devices. This includes support for the SC57x, SC58x, SC59x, and SC59x-64 SoCs, which have many common features such as common ADI IP blocks, and SHARC DSP cores. This commit introduces core functionality required for all boards using an SC5xx SoC, such as: - SPL configuration - Required CPU hooks such as reset - Boot ROM interaction to load the stage 2 bootloader in the reference configuration. Other options are possible but not officially supported at this time - SoC-common configuration expected to be reused by all boards - Early initialization for system clocks and DDR controller Co-developed-by: Greg Malysa <greg.malysa@timesys.com> Signed-off-by: Greg Malysa <greg.malysa@timesys.com> Co-developed-by: Ian Roberts <ian.roberts@timesys.com> Signed-off-by: Ian Roberts <ian.roberts@timesys.com> Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas@analog.com> Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com> Signed-off-by: Arturs Artamonovs <arturs.artamonovs@analog.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
2024-05-07Merge branch '2024-05-06-remove-include-common_h' into nextTom Rini4204-4307/+1245
- Merge the four series that I made to finally remove include/common.h. For the most part, this is just removing <common.h> entirely. In a few cases we needed to add <linux/types.h> or <time.h>. In the case of PowerPC related code, we instead need to bring in <asm/ppc.h>.
2024-05-07common.h: Remove this file and all referencesTom Rini7-49/+5
With all files that had included this file directly having been updated, we can now remove this file. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07api: Remove <common.h> and add needed includesTom Rini11-10/+8
Remove <common.h> from here and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07xen: Remove <common.h> and add needed includesTom Rini6-5/+1
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07watchdog: Remove <common.h> and add needed includesTom Rini29-29/+1
Remove <common.h> from this driver directory and when needed add missing include files directly. Acked-by: Angelo Dureghello <angelo@kernel-space.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07w1-eeprom: Remove <common.h> and add needed includesTom Rini4-4/+0
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07w1: Remove <common.h> and add needed includesTom Rini3-3/+0
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07virtio: Remove <common.h> and add needed includesTom Rini10-9/+1
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07video: Remove <common.h> and add needed includesTom Rini111-110/+10
Remove <common.h> from this driver directory and when needed add missing include files directly. Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07usb: Remove <common.h> and add needed includesTom Rini118-118/+3
Remove <common.h> from this driver directory and when needed add missing include files directly. Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07ufs: Remove <common.h> and add needed includesTom Rini6-5/+1
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07tpm: Remove <common.h> and add needed includesTom Rini15-15/+6
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07timer: Remove <common.h> and add needed includesTom Rini31-31/+7
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07thermal: Remove <common.h> and add needed includesTom Rini5-5/+0
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07sysreset: Remove <common.h> and add needed includesTom Rini21-21/+1
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07sysinfo: Remove <common.h> and add needed includesTom Rini6-6/+0
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07spmi: Remove <common.h> and add needed includesTom Rini3-3/+0
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07spi: Remove <common.h> and add needed includesTom Rini67-67/+5
Remove <common.h> from this driver directory and when needed add missing include files directly. Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07sound: Remove <common.h> and add needed includesTom Rini25-25/+3
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07soc: Remove <common.h> and add needed includesTom Rini9-9/+0
Remove <common.h> from this driver directory and when needed add missing include files directly. Reviewed-by: Bryan Brattlof <bb@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07smem: Remove <common.h> and add needed includesTom Rini3-3/+0
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07sm: Remove <common.h> and add needed includesTom Rini3-3/+0
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07serial: Remove <common.h> and add needed includesTom Rini46-46/+6
Remove <common.h> from this driver directory and when needed add missing include files directly. Reviewed-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07scsi: Remove <common.h> and add needed includesTom Rini5-5/+0
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07rtc: Remove <common.h> and add needed includesTom Rini30-30/+9
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.1 at 2024-11-17 11:42:54 +0000