aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-02-08block: Migrate SystemACE chip to KconfigTom Rini4-16/+21
Migrate the base and sub-options to Kconfig. Note that we only enable this in the base sandbox config now. Cc: Alexey Brodkin <alexey.brodkin@gmail.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Tom Rini <trini@konsulko.com> --- Is this driver still used anywhere? It's fishy that it's only enabled in sandbox anymore.
2018-02-08Convert LIB_UUID to KconfigAdam Ford5-10/+8
config_fallback.h has some logic that checks a variety of options and selects LIB_UUID if it hasn't already been selected. This will all LIB_UUID in Kconfig and select this option for the list of options to allow us to remove the logic from fallbacks Signed-off-by: Adam Ford <aford173@gmail.com>
2018-02-08Convert CONFIG LIB_HW_RAND to KconfigAdam Ford13-20/+19
config_fallbacks.h had some logic to automatically select LIB_RAND if RANDOM_UUID or CMD_UUID were set if LIB_HW_RAND wasn't already selected. By migrating LIB_HW_RAND to Kconfig, we can remove this check from config_fallbacks.h and put it into Kconfig Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> [trini: Turn into a choice, add NET_RANDOM_ETHADDR] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-08Convert CONFIG_APBH_DMA et al to KconfigAdam Ford18-44/+22
This converts the following to Kconfig: CONFIG_APBH_DMA CONFIG_APBH_DMA_BURST CONFIG_APBH_DMA_BURST8 Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Stefan Agner <stefan.agner@toradex.com> [trini: Add in MMC as well] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-08Kconfig: Select networking commands only when NET is enabledMichal Simek1-4/+4
There is no reason to unconditially select network commands as distro defaults without networking enable. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-02-08Kconfig: net: phylib: Phylib should depends on NETMichal Simek1-0/+1
There is no value to enable phylib without networking support. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-02-08omap4: sdp4430: Enable CONFIG_NET for this platformMichal Simek1-0/+5
Distro default configuration contains also dhcp and pxe setting which can't working without enabling CONFIG_NET. EFI is not required that's why it is not enabled. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-02-08configs: stm32: Enable CONFIG_ENV_VARS_UBOOT_CONFIGPatrice Chotard6-0/+8
Enable CONFIG_ENV_VARS_UBOOT_CONFIG for all STM32 boards It allows to retrieve the SoC name into the "soc" environment variable. Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2018-02-08Convert CONFIG_NAND_MXS to KconfigStefan Agner32-40/+42
This converts CONFIG_NAND_MXS to Kconfig. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-02-08spl: use ARCH_MX23/28 to specify SPL_LDSCRIPTStefan Agner1-1/+1
Simplify SPL_LDSCRIPT config by using the new arch Kconfig configurations ARCH_MX23 and ARCH_MX28. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-02-08arm: imx: mx28: Move MX28 selection to KconfigStefan Agner18-63/+67
The motivation for moving MX28 selection to Kconfig is to be able to better handle NAND MXS selection through Kconfig. This selection method also aligns with the way other i.MX SoCs are selected in U-Boot. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-02-08arm: imx: mx23: Move MX23 selection to KconfigStefan Agner11-42/+50
The motivation for moving MX23 selection to Kconfig is to be able to better handle NAND MXS selection through Kconfig. This selection method also aligns with the way other i.MX SoCs are selected in U-Boot. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-02-08Convert CONFIG_MXC_GPIO to KconfigAdam Ford41-55/+20
This converts the following to Kconfig: CONFIG_MXC_GPIO Signed-off-by: Adam Ford <aford173@gmail.com>
2018-02-08configs: imx6q_logic: Move CONFIG_PHY_SMSC to defconfigAdam Ford2-1/+1
Since CONFIG_PHY_SMSC was already in Kconfig, move this from header file to defconfig Signed-off-by: Adam Ford <aford173@gmail.com>
2018-02-08configs: imx6q_logic: Move CONFIG_MXC_UART to KconfigAdam Ford2-2/+1
Since CONFIG_MXC_UART is already in Kconfig, move this from the header to imx6q_logic_defconfig Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2018-02-07doc: watchdog: Remove Blackfin related documentation entryLukasz Majewski1-3/+0
This commit cleans up the README.watchdog by removing the reminescent of ADI's Blackfin architecture removed some time ago. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-02-07ARM: omap3: evm: Remove CONFIG_SYS_NS16550_REG_SIZE undefineDerald D. Woods1-3/+0
This commit removes an attempt to workaround a previous compilation warning that is is now fixed in "include/configs/ti_omap3_common.h". Signed-off-by: Derald D. Woods <woods.technical@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-02-07ARM: omap3: ti_omap3_common: Fix CONFIG_SYS_NS16550_REG_SIZE compiler warningDerald D. Woods1-4/+6
This commit fixes the following compiler warnings when DM_SERIAL is enabled. ---8<------------------------------------------------------------------- ... CC spl/board/ti/evm/evm.o In file included from /solution/scm/u-boot-master/board/ti/evm/evm.c:16:0: /solution/scm/u-boot-master/include/ns16550.h:31:0: warning: "CONFIG_SYS_NS16550_REG_SIZE" redefined #define CONFIG_SYS_NS16550_REG_SIZE (-1) In file included from /solution/scm/u-boot-master/include/configs/omap3_evm.h:22:0, from include/config.h:5, from /solution/scm/u-boot-master/include/common.h:21, from /solution/scm/u-boot-master/board/ti/evm/evm.c:14: /solution/scm/u-boot-master/include/configs/ti_omap3_common.h:33:0: note: this is the location of the previous definition # define CONFIG_SYS_NS16550_REG_SIZE (-4) LD spl/board/ti/evm/built-in.o ... CC spl/drivers/serial/ns16550.o In file included from /solution/scm/u-boot-master/drivers/serial/ns16550.c:11:0: /solution/scm/u-boot-master/include/ns16550.h:31:0: warning: "CONFIG_SYS_NS16550_REG_SIZE" redefined #define CONFIG_SYS_NS16550_REG_SIZE (-1) In file included from /solution/scm/u-boot-master/include/configs/omap3_evm.h:22:0, from include/config.h:5, from /solution/scm/u-boot-master/include/common.h:21, from /solution/scm/u-boot-master/drivers/serial/ns16550.c:7: /solution/scm/u-boot-master/include/configs/ti_omap3_common.h:33:0: note: this is the location of the previous definition # define CONFIG_SYS_NS16550_REG_SIZE (-4) LD spl/drivers/serial/built-in.o ... ---8<------------------------------------------------------------------- Signed-off-by: Derald D. Woods <woods.technical@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-02-07spl: eMMC/SD: Provide one __weak spl_boot_mode() functionLukasz Majewski16-163/+11
The goal of this patch is to clean up the code related to choosing SPL MMC boot mode. The spl_boot_mode() now is called only in spl_mmc_load_image() function, which is only compiled in if CONFIG_SPL_MMC_SUPPORT is enabled. To achieve the goal, all per mach/arch implementations eligible for unification has been replaced with one __weak implementation. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de> Acked-by: Michal Simek <michal.simek@xilinx.com> (For ZynqMP) Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-02-07ARM: dts: keystone-k2g-ice: Add support for QSPIVignesh R1-0/+48
K2G ICE has a s25fl256s1 QSPI NOR flash connected to QSPI at CS0. Add DT entries for the same. Signed-off-by: Vignesh R <vigneshr@ti.com>
2018-02-07ARM: k2g: Add pinmux data for QSPI on K2G ICEVignesh R1-0/+9
Add pinmux for QSPI pins on K2G ICE board. Signed-off-by: Vignesh R <vigneshr@ti.com>
2018-02-07atcspi200: avoid possible NULL dereferenceHeinrich Schuchardt1-2/+2
Check if ns before and not after dereferencing it. Indicated by cppcheck. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-02-07part: Allocate only one legacy_mbr bufferAlexey Brodkin1-1/+1
Commit ff98cb90514d ("part: extract MBR signature from partitions") blindly switched allocated by ALLOC_CACHE_ALIGN_BUFFER buffer type from "unsigned char" to "legacy_mbr" which caused allocation of size = (typeof(legacy_mbr) * dev_desc->blksize) instead of just space enough for "legacy_mbr" structure. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Peter Jones <pjones@redhat.com> Cc: Alexander Graf <agraf@suse.de> Cc: Tom Rini <trini@konsulko.com>
2018-02-07move booti_setup to arch/arm/lig/image.cBin Chen4-80/+100
Follow bootz's pattern by moving the booti_setup to arch/arm/lib. This allows to use booti_setup in other paths, e.g booting an Android image containing Image format. Note that kernel relocation is move out of booti_setup and it is the caller's responsibility to do it and allows them do it differently. say, cmd/booti.c just do a manually, while in the bootm path, we can use bootm_load_os(with some changes). Signed-off-by: Bin Chen <bin.chen@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-02-07parse the second area of android imageBin Chen2-0/+21
The second area of android image was intended to put a 2nd stage bootloader but in practice were rarely used (in my knowledge). An proposal was made to the AOSP to (re)use the second area as the dtb[1], This patch itself doesn't depend on that proposal being accepted but it won't be that helpful as well if that proposal won't be accepted. But don't do any harm as well. [1] https://android-review.googlesource.com/#/c/417447/ Signed-off-by: Bin Chen <bin.chen@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2018-02-06Merge git://git.denx.de/u-boot-ubiTom Rini1-5/+0
2018-02-06Merge git://git.denx.de/u-boot-i2cTom Rini4-104/+311
2018-02-06ubi: Ensure no fastmap flush after uif_closeMartin Townsend1-5/+0
On detach UBI attempts to update fastmap after closing user interfaces but at this point UBI volumes have already been free()'ed and fastmap can no longer access these data structures. Signed-off-by: Martin Townsend <mtownsend1973@gmail.com> Cc: hs@denx.de Cc: kmpark@infradead.org Cc: richard@sigma-star.at
2018-02-06i2c: mvtwsi.c: Avoid NULL dereferenceHeinrich Schuchardt1-1/+2
For '#ifndef CONFIG_DM_I2C' twsi_i2c_init() passes NULL as 4th parameter to __twsi_i2c_init(). Identified with cppcheck. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-02-06i2c: ihs_i2c: Factor out send_buffer methodMario Six1-24/+26
Simplify the driver logic by extracting a common send_buffer method. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-02-06i2c: ihs_i2c: Make DM compatibleMario Six2-3/+199
Make the ihs_i2c driver DM-compatible; for legacy boards, the old functions are retained within #ifdefs. No board uses the new DM driver yet; this patch only lays the foundation for future support. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-02-06i2c: ihs_i2c: Prepare DM conversionMario Six1-29/+40
Prepare the function interface of the ihs_i2c driver for DM conversion in a future patch. While we're at it, fix some style violations, and make the code more readable. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-02-06i2c: fsl_i2c: Make live-tree compatibleMario Six1-10/+6
Make the fsl_i2c driver compatible with a live device tree. Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-02-06i2c: fsl_i2c: Remove inline declarationsMario Six1-7/+7
Some functions in the fsl_i2c driver are declared as inline, even though they are quite large, which needlessly increases the size of the resulting binary. This patch removes the inline declarations. Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-02-06i2c: fsl_i2c: Fix style violationsMario Six1-55/+56
Fix some style violations in the fsl_i2c I2C driver, and use shorter type names for variables in some cases. Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-02-05usb: ulpi: kconfig: Remove meaningless choice defaultUlf Magnusson1-1/+0
'default' on a choice refers to the symbol selected by default, not to the choice mode, so 'default n' is meaningless. No functional changes. Optional choices implicitly default to n mode (and there is no way to make them default to another mode). Discovered in Kconfiglib (https://github.com/ulfalizer/Kconfiglib), which prints the following warning: warning: the default selection n (undefined) of <choice> (defined at drivers/usb/ulpi/Kconfig:3) is not contained in the choice I've added a corresponding warning to the C tools too, which is currently in linux-next: https://patchwork.kernel.org/patch/9983667/ Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-02-05am335x, shc: kconfig: Fix misspelled choice defaultUlf Magnusson1-1/+1
There is no EMMC symbol in the "enable different boot versions for the shc board" choice. SHC_EMMC was probably intended. No functional changes. Kconfig choices fall back on using the first (visible) symbol in the choice as the default if the default symbol is not visible. Discovered in Kconfiglib (https://github.com/ulfalizer/Kconfiglib), which prints the following warning: warning: the default selection EMMC (undefined) of <choice> (defined at board/bosch/shc/Kconfig:15) is not contained in the choice I've added a corresponding warning to the C tools too, which is currently in linux-next: https://patchwork.kernel.org/patch/9983667/ Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
2018-02-05Fix FreeBSD endian checksJustin Hibbits1-0/+3
FreeBSD, like OpenBSD, uses BIG_ENDIAN, LITTLE_ENDIAN, and BYTE_ORDER, whereas Linux and compatibles use __-prefixed names. Define the names the same as the OpenBSD block below it.
2018-02-05cmd: Make CONFIG_CMD_FPGA depend on CONFIG_FPGATuomas Tynkkynen357-357/+1
cmd/Makefile has: ifdef CONFIG_FPGA obj-$(CONFIG_CMD_FPGA) += fpga.o endif which means that if CONFIG_FPGA is not set, CONFIG_CMD_FPGA silently does nothing. Let's remove that Makefile conditional and instead express this equivalent dependency in Kconfig, so a lot of redundant # CONFIG_CMD_FPGA is not set can be removed from board defconfigs that don't actually have an FPGA. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-02-05fpga: Resync various CONFIG_FPGA_* symbolsTuomas Tynkkynen9-11/+5
These are declared in Kconfig, but some #defines have crept in. CONFIG_FPGA CONFIG_FPGA_ALTERA CONFIG_FPGA_CYCLON2 CONFIG_FPGA_SOCFPGA CONFIG_FPGA_XILINX CONFIG_FPGA_ZYNQMPPL Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-02-05usb: dwc2: make casts of ep->dma_buf consistentTom Rini1-1/+1
In most places in the code we cast this to an unsigned long, but in one place we cast to an unsigned int. For consistency and to fix a warning on 64bit targets, always cast this to unsigned long. For the long term we should however change the declaration of dma_buf. Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Lukasz Majewski <lukma@denx.de> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-04MAINTAINERS: board: qcom: db410c, db820c: update email.Jorge Ramirez-Ortiz2-2/+2
Update email address. Signed-off-by: Jorge Ramirez-Ortiz <jramirez@baylibre.com>
2018-02-04travis.yml: run buildman with option -EDaniel Schwierzeck1-1/+1
This forces all compiler warnings to be treated as errors. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-02-04travis.yml: fix 'set +e' in build scriptDaniel Schwierzeck1-3/+2
The build script should not manipulate shell flags (especially '-e'). A non-zero exit value can also be catched with 'cmd || ret=$?'. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-02-04buildman: add option -E for treating compiler warnings as errorsDaniel Schwierzeck4-2/+10
Add a new option '-E' for treating all compiler warnings as errors. Eventually this will pass 'KCFLAGS=-Werror' to Kbuild. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-02-04README: add doc for how to supply user specific compiler flags to KbuildDaniel Schwierzeck1-0/+5
Probably not all users are aware of this possibility, thus add a pointer to the README. Also add a useful example. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2018-02-04MAINTAINERS: Update email address for Maxime RipardMaxime Ripard2-4/+4
Free Electrons is no more and is now known as Bootlin, change my email address accordingly. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-02-04Merge git://git.denx.de/u-boot-dmTom Rini12-6/+351
2018-02-04Merge git://git.denx.de/u-boot-imxTom Rini86-969/+8262
2018-02-04imx: mx7: run sec_init for CAAM RNGBryan O'Donoghue1-0/+5
This patch adds a sec_init call into arch_misc_init(). Doing so in conjunction with the patch "drivers/crypto/fsl: assign job-rings to non-TrustZone" enables use of the CAAM in Linux when OPTEE/TrustZone is active. u-boot will initialise the RNG and assign ownership of the job-ring registers to a non-TrustZone context. With recent changes by Lukas Auer to fully initialize the RNG in sec_init() this means that u-boot will hand-off the CAAM in a state that Linux then can use the CAAM without touching the reserved DECO registers. This change is safe both for the OPTEE/TrustZone boot path and the regular non-OPTEE/TrustZone boot path. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Marco Franchi <marco.franchi@nxp.com> Cc: Vanessa Maegima <vanessa.maegima@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Tested-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
generated by cgit v1.1 at 2024-07-16 14:43:46 +0000