aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-04-10Merge https://source.denx.de/u-boot/custodians/u-boot-mmcWIP/10Apr2023Tom Rini10-73/+63
2023-04-10cmd: mmc: Return CMD_RET_* from commandsPali Rohár1-5/+13
Numeric return values may cause strange errors line: exit not allowed from main input shell. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-10mmc: Use EXT_CSD_EXTRACT_BOOT_PART() macro for extracting boot partPali Rohár3-4/+3
Mask macro PART_ACCESS_MASK filter out access bits of emmc register and macro EXT_CSD_EXTRACT_BOOT_PART() extracts boot part bits of emmc register. So use EXT_CSD_EXTRACT_BOOT_PART() when extracting boot partition. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-10mmc: mv_sdhci: Depend on DM_MMCStefan Roese2-32/+8
All build targets using this driver already use DM_MMC. So let's depend this driver on this Kconfig symbol and remove the non-DM driver part. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2023-04-10mmc: mv_sdhci: Remove CONFIG_MMC_SDHCI_IO_ACCESSORS supportStefan Roese1-8/+0
CONFIG_MMC_SDHCI_IO_ACCESSORS is not supported and/or used by this driver so let's remove these unused parts completely. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2023-04-10mmc: mv_sdhci: Simplify call to sdhci_mvebu_mbus_config()Stefan Roese1-8/+4
This driver already depends on CONFIG_ARCH_MVEBU, so there is no need to have some checks for this Kconfig symbol in the driver itself. Let's remove these superfluous checks. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2023-04-10test: dm: mmc: Check block erasing boundariesLoic Poulain1-7/+7
Verify that erasing blocks does not impact adjacent ones. - Write four blocks [0 1 2 3] - Erase two blocks [ 1 2 ] - Verify [0 1 2 3 ] Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
2023-04-10mmc: erase: Use TRIM erase when availableLoic Poulain1-11/+23
The default erase command applies on erase group unit, and simply round down to erase group size. When the start block is not aligned to erase group size (e.g. erasing partition) it causes unwanted erasing of the previous blocks, part of the same erase group (e.g. owned by other logical partition, or by the partition table itself). To prevent this issue, a simple solution is to use TRIM as argument of the Erase command, which is usually supported with eMMC > 4.0, and allow to apply erase operation to write blocks instead of erase group Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-10mmc: Check support for TRIM operationsLoic Poulain2-0/+7
When secure/insecure TRIM operations are supported. When used as erase command argument it applies the erase operation to write blocks instead of erase groups. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2023-04-09Merge tag 'efi-2023-07-rc1' of ↵WIP/09Apr2023Tom Rini15-27/+149
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2023-07-rc1 Documentation: * man-page for coninfo command * documentation style * switch settings for boot modes on AM62 SK UEFI: * avoid using deprecated HandleProtocol() * set static attribute for non-exported functions and variables
2023-04-08Merge branch 'master_regulator/fixes' of ↵WIP/08Apr2023Tom Rini6-11/+11
https://source.denx.de/u-boot/custodians/u-boot-sh - Fix usage of CONFIG_IS_ENABLED and DM_REGULATOR
2023-04-08Merge tag 'video-20230407' of ↵Tom Rini15-49/+1484
https://source.denx.de/u-boot/custodians/u-boot-video - fix building sandbox without SDL - improve tegra DC driver to work with panel ops and implement native 180 degree panel rotation support - add T30 support to tegra DC driver - add DSI driver (based on mainline Linux one with minor adjustments, only T30 tested) - add get_display_timing ops to simple panel driver - extend simple panel driver to use it for MIPI DSI panels which do not require additional DSI commands for setup
2023-04-08cmd: consider multiplexing in coninfoHeinrich Schuchardt1-2/+9
If console multiplexing in enabled (CONFIG_CONSOLE_MUX=y), the output of the coninfo command should show the file association (stdin, stderr, stdout) for all devices not only the default ones. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-08efi: loader: Make efi_runtime_mmio staticBin Meng1-1/+1
efi_runtime_mmio is only referenced in efi_boottime.c Signed-off-by: Bin Meng <bmeng@tinylab.org>
2023-04-08efi: loader: Make efi_mem staticBin Meng1-1/+1
efi_mem is only referenced in efi_memory.c Signed-off-by: Bin Meng <bmeng@tinylab.org>
2023-04-08efi: loader: Make efi_event_queue and efi_register_notify_events staticBin Meng2-5/+2
efi_event_queue and efi_register_notify_events are only referenced in efi_boottime.c Signed-off-by: Bin Meng <bmeng@tinylab.org>
2023-04-08efi: selftest: Make load_file() and load_file2() staticBin Meng1-10/+10
load_file() and load_file2() are only referenced in efi_selftest_load_file.c Signed-off-by: Bin Meng <bmeng@tinylab.org>
2023-04-08efi: selftest: Make record staticBin Meng1-1/+1
record is only referenced in efi_selftest_exitbootservices.c Signed-off-by: Bin Meng <bmeng@tinylab.org>
2023-04-08efi_loader: avoid using HandleProtocol in initrddump.efiHeinrich Schuchardt1-2/+3
HandleProtocol() is deprecated and leaves an OpenedProtocolInformation behind. Use OpenProtocol(GET_PROTOCOL) instead. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-04-08efi_loader: avoid using HandleProtocol in helloworld.efiHeinrich Schuchardt1-5/+8
HandleProtocol() is deprecated and leaves an OpenedProtocolInformation behind. Use OpenProtocol(GET_PROTOCOL) instead. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-04-08doc: coninfo man-pageHeinrich Schuchardt2-0/+56
Provide a man-page for the coninfo command. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-04-08doc: mention usage of .readthedocs.ymlHeinrich Schuchardt1-0/+3
Mention that HTML pages are published at https://u-boot.readthedocs.io/ and that the file .readthedocs.yml controls the build process. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-08doc: ti: Add switch setting for boot modes on AM62 SKJudith Mendez1-0/+25
List some common boot modes and their corresponding switch settings for AM62 SK. Signed-off-by: Judith Mendez <jm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-04-08doc: describe our documentation styleHeinrich Schuchardt2-0/+30
Provide a reference document for the U-Boot documentation style. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-08video: tl070wsh30: Fix use of CONFIG_IS_ENABLED on DM_REGULATORMarek Vasut1-2/+2
The DM_REGULATOR symbol has SPL counterpart in: drivers/power/regulator/Kconfig:config SPL_DM_REGULATOR Use CONFIG_IS_ENABLED() macro to match on the correct variant depending on the build stage. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-08video: simple-panel: Fix use of CONFIG_IS_ENABLED on DM_REGULATORMarek Vasut1-2/+2
The DM_REGULATOR symbol has SPL counterpart in: drivers/power/regulator/Kconfig:config SPL_DM_REGULATOR Use CONFIG_IS_ENABLED() macro to match on the correct variant depending on the build stage. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-08video: rm68200: Fix use of CONFIG_IS_ENABLED on DM_REGULATORMarek Vasut1-2/+2
The DM_REGULATOR symbol has SPL counterpart in: drivers/power/regulator/Kconfig:config SPL_DM_REGULATOR Use CONFIG_IS_ENABLED() macro to match on the correct variant depending on the build stage. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-08video: otm8009a: Fix use of CONFIG_IS_ENABLED on DM_REGULATORMarek Vasut1-2/+2
The DM_REGULATOR symbol has SPL counterpart in: drivers/power/regulator/Kconfig:config SPL_DM_REGULATOR Use CONFIG_IS_ENABLED() macro to match on the correct variant depending on the build stage. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-08mmc: npcm_sdhci: Fix use of CONFIG_IS_ENABLED on DM_REGULATORMarek Vasut1-1/+1
The DM_REGULATOR symbol has SPL counterpart in: drivers/power/regulator/Kconfig:config SPL_DM_REGULATOR Use CONFIG_IS_ENABLED() macro to match on the correct variant depending on the build stage. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-08misc: ub251xb: Fix use of CONFIG_IS_ENABLED on DM_REGULATORMarek Vasut1-2/+2
The DM_REGULATOR symbol has SPL counterpart in: drivers/power/regulator/Kconfig:config SPL_DM_REGULATOR Use CONFIG_IS_ENABLED() macro to match on the correct variant depending on the build stage. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-04-07Merge branch 'master_sh/gen4/initial' of ↵WIP/07Apr2023Tom Rini72-136/+11402
https://source.denx.de/u-boot/custodians/u-boot-sh - Initial R-Car Generation 4 support
2023-04-07simple_panel: support simple MIPI DSI panelsSvyatoslav Ryhel1-4/+33
Re-use simple panel driver for MIPI DSI panels which do not require additional DSI commands for setup. Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20 Tested-by: Nicolas Chauvet <kwizart@gmail.com> # Paz00 Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF700T T30 Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-04-07simple_panel: add support for get_display_timingSvyatoslav Ryhel1-0/+10
Some cases may require passing display timings from panel driver. To handle such cases support parsing device tree panel node for timing subnode. Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20 Tested-by: Nicolas Chauvet <kwizart@gmail.com> # Paz00 Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # Google Nexus 7 2012 Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-04-07video: tegra20: add DSI controller driverSvyatoslav Ryhel6-0/+1273
Adds support for both DSI outputs found on Tegra. Only very minimal functionality is implemented, so advanced features like ganged mode won't work. Driver is heavily based on mainline Tegra DSI and re-uses much of its features. Only T30 is supported for now but T20 support can be added if any supported devices will be found. Driver is wrapped as panel driver since Tegra DC driver supports only panel drivers calls. Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF600T T30 Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # HTC One X T30 Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-04-07video: tegra-dc: pass DC regmap to internal devicesSvyatoslav Ryhel2-0/+16
Internal video devices like DSI and HDMI controllers require sending commands into DC register field. To make this available, lets create platform data, which is restricted to pass DC regmap only to pre-defined devices. Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30 Tested-by: Nicolas Chauvet <kwizart@gmail.com> # Paz00 Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20 Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # HTC One X T30 Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-04-07video: tegra-dc: add panel_set_backlight callSvyatoslav Ryhel1-0/+7
Tegra DC driver does not call panel_set_backlight, which can result in absence of backlight on device. Fix this by calling panel_set_backlight with BACKLIGHT_DEFAULT just after panel_enable_backlight. Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20 Tested-by: Nicolas Chauvet <kwizart@gmail.com> # Paz00 Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30 Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895 T30 Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-04-07video: tegra-dc: add 180 degree panel rotationSvyatoslav Ryhel1-4/+19
Unlike 90 and 270 degree rotation, 180 degree rotation is more common and does not require scaling. Implement it for correct grouper support. Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # Google Nexus 7 2012 Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # Google Nexus 7 2012 Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-04-07video: tegra-dc: assign regmap directlySvyatoslav Ryhel1-11/+8
Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20 Tested-by: Nicolas Chauvet <kwizart@gmail.com> # Paz00 Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30 Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895 T30 Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-04-07video: tegra-dc: request timings from panel driver firstSvyatoslav Ryhel1-12/+17
Check if panel driver has display timings and get those. If panel driver does not pass timing, try to find timing under rgb node for backwards compatibility. Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20 Tested-by: Nicolas Chauvet <kwizart@gmail.com> # Paz00 Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30 Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895 T30 Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-04-07video: tegra-dc: get clocks from device treeSvyatoslav Ryhel1-8/+23
DISP1 clock may use PLLP, PLLC and PLLD as parents. Instead of hardcoding, lets pass clock and its parent from device tree. Default parent is PLLP. Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20 Tested-by: Nicolas Chauvet <kwizart@gmail.com> # Paz00 Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30 Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # HTC One X T30 Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-04-07video: move tegra dc driver into own folderSvyatoslav Ryhel5-10/+14
Move tegra dc driver to tegra20 directory and also mention T30 in description of the driver's config option. Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> [agust: add commit description] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2023-04-07tegra: lcd: video: integrate display driver for t30Marcel Ziswiler4-2/+58
On popular request make the display driver from T20 work on T30 as well. Turned out to be quite straight forward. However a few notes about some things encountered during porting: Of course the T30 device tree was completely missing host1x as well as PWM support but it turns out this can simply be copied from T20. The only trouble compiling the Tegra video driver for T30 had to do with some hard-coded PWM pin muxing for T20 which is quite ugly anyway. On T30 this gets handled by a board specific complete pin muxing table. The older Chromium U-Boot 2011.06 which to my knowledge was the only prior attempt at enabling a display driver for T30 for whatever reason got some clocking stuff mixed up. Turns out at least for a single display controller T20 and T30 can be clocked quite similar. Enjoy. Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF T30 Tested-by: Jonas Schwöbel <jonasschwoebel@yahoo.de> # Surface RT T30 Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895 T30 Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
2023-04-07sandbox: video: Fix building without SDLSimon Glass1-0/+8
This is currently broken. If SDL is not installed, SANDBOX_SDL becomes false and build errors are generated, e.g.: test/dm/video.c:424: undefined reference to `sandbox_sdl_set_bpp' Fix it by making the function return an error in this case. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-04-07ARM: renesas: Add R8A779G0 V4H White Hawk board codeHai Pham8-1/+235
Add board code for R8A779G0 V4H White Hawk board. Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [Marek: Synchronize configuration symbols which are now switched to Kconfig Mallocate gd->bd->bi_boot_params, i.e. drop the assignment Sort headers, use clrbits_le32(), use BIT macros where appropriate Use CONFIG_SYS_CLK_FREQ for counter frequency instead of custom macro]
2023-04-07ARM: renesas: Add R8A779G0 V4H Kconfig entry and PRR IDHai Pham3-0/+8
Add Kconfig entry and PRR ID to support R8A779G0 V4H SoC. Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [Marek: Update commit message]
2023-04-07ARM: dts: renesas: Add R8A779G0 V4H White Hawk DTsTho Vu4-0/+431
Add DTs for R8A779G0 V4H White Hawk CPU and BreakOut boards. Based on Linux next 20230228 DTs up to commit 058f4df42121 ("Add linux-next specific files for 20230228") Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Tho Vu <tho.vu.wh@renesas.com> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [Marek: Sync with Linux next 20230228, update commit message Rename DTs to match Linux, which has dash between white-hawk]
2023-04-07ARM: dts: renesas: Add R8A779G0 V4H DT extrasHai Pham1-0/+28
Add R8A779G0 V4H DT extras for U-Boot. Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [Marek: Update compatible string to match latest upstream]
2023-04-07ARM: dts: renesas: Add R8A779G0 V4H DTPhong Hoang1-0/+1355
Add initial DT support for R8A779G0 (R-Car V4H). Based on Linux next commit 058f4df42121 ("Add linux-next specific files for 20230228") Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [Marek: Sync with Linux next 20230228, update commit message]
2023-04-07pinctrl: renesas: Add R8A779G0 V4H PFC tablesHai Pham5-2/+4291
Add pinctrl tables for R8A779G0 V4H SoC. Based on Linux next 20230228 PFC tables tables up to commit 058f4df42121 ("Add linux-next specific files for 20230228") Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [Marek: Sync with Linux next 20230228, sort sh_pfc_pinconf_set voltage args]
2023-04-07clk: renesas: Add R8A779G0 V4H clock tablesHai Pham3-0/+319
Add clock tables for R8A779G0 V4H SoC from Linux next commit 058f4df42121 ("Add linux-next specific files for 20230228") There is an adjustment to the clock tables to make them easier suitable for U-Boot, PLL2 is not treated as GEN4 PLL type PLL2_VAR, but rather a plain PLL2. This should be sufficient until PLL2_VAR is implemented in the clock core. Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> [Marek: Sync with Linux next 20230228 . Update from CLK to CPG core driver Treat PLL2 as non-PLL2_VAR for now]
generated by cgit v1.1 at 2024-08-05 16:34:36 +0000