aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-04-21usb: dwc3-of-simple: Add support for DRA7/AM57 platforms.Jean-Jacques Hiblot2-0/+2
Add the compatibility with "ti,dwc3" and enable it by default if DM_USB is enabled. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-04-21usb: dwc3-of-simple: Fix dependenciesJean-Jacques Hiblot1-1/+1
This simple glue layer does not require CONFIG_MISC, but it does require CONFIG_DM_USB. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2018-04-18Merge git://git.denx.de/u-boot-uniphierTom Rini27-206/+936
2018-04-18Merge git://git.denx.de/u-boot-shTom Rini23-191/+647
2018-04-18reset: uniphier: add ethernet reset control supportKunihiko Hayashi1-0/+5
Add reset lines for ethernet controller on each SoC. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-18clk: uniphier: add ethernet clock control supportKunihiko Hayashi1-0/+6
Add clock control for ethernet controller on each SoC. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-18ARM: dts: uniphier: sync DT with Linux 4.17-rc1Masahiro Yamada25-206/+925
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-04-17Merge git://git.denx.de/u-boot-socfpgaTom Rini25-0/+802
2018-04-17Merge tag 'arc-for-2018.05-rc3' of git://git.denx.de/u-boot-arcTom Rini5-3/+5
Subtle ARC fixes for v2018.05-RC3 These are only very subtle clean-ups here and there including: * Correctly specified CPU freq for HSDK (production boards are all shipped with 500MHZ as opposed to early batch running at 1GHz) * Addition of SNPS internal group email to MAINTAINERS file * Switch to Hush shell on AXS10x boards
2018-04-17reset: fix bulk API when DM_RESET is disabledNeil Armstrong1-2/+3
In the commit "reset: Add get/assert/deassert/release for bulk of reset signals" the disabled reset_release_bulk() and reset_get_bulk() used the wrong struct clk_bulk instead of struct reset_ctl_bulk. Fixes: 0c28233903b5 ("reset: Add get/assert/deassert/release for bulk of reset signals") Reported-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-17bootm: Align cache flush begin addressBryan O'Donoghue1-1/+7
commit b4d956f6bc0f ("bootm: Align cache flush end address correctly") aligns the end address of the cache flush operation to a cache-line size to ensure lower-layers in the code accept the range provided and flush. A similar action should be taken for the begin address of a cache flush operation. The load address may not be aligned to a cache-line boundary, so ensure the passed address is aligned. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reported-by: Breno Matheus Lima <brenomatheus@gmail.com> Suggested-by: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Tested-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-17clk: fix clk_get_bulk when phandle errorNeil Armstrong1-2/+2
This fixes the Coverity Defect CID 175347 when dev_count_phandle_with_args() returns a negative value. Fixes: a855be87da49 ("clk: Add get/enable/disable/release for a bulk of clocks") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-04-17reset: fix reset_get_bulk when phandle errorNeil Armstrong1-2/+2
This fixes the Coverity Defect CID 175348 when dev_count_phandle_with_args() returns a negative value. Fixes: 0c28233903b5 ("reset: Add get/assert/deassert/release for bulk of reset signals") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-04-17ARM: rmobile: Update M2 KoelschMarek Vasut7-185/+532
The M2 Koelsch port was broken since some time. This patch updates the M2 Koelsch port to use modern frameworks, DM, DT probing, SPL for the preloading and puts it on par with the M2 Porter board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-17ARC: Remove unused DECLARE_GLOBAL_DATA_PTR from init_helpers.cEugeniy Paltsev1-2/+0
"Global data" structure "gd" is not used in init_helpers.c thus DECLARE_GLOBAL_DATA_PTR might be safely removed. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-04-17ARC: Update ARC architecture maintainersEugeniy Paltsev1-0/+2
Update ARC architecture maintainers and add uboot-snps-arc@synopsys.com mailing list. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-04-17ARC: AXS10x: Enable hush shellEugeniy Paltsev2-0/+2
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-04-17ARC: HSDK: Fix CPU frequency valueEugeniy Paltsev1-1/+1
CPU on HSDK board runs at 500MHz after preloader so fix wrong CPU frequency value in hsdk_defconfig. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-04-17configs: Resync with savedefconfigTom Rini276-752/+24
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-17Merge git://git.denx.de/u-boot-marvellTom Rini1-1/+1
2018-04-17configs: socfpga: disable EFI and ISO partition typesDinh Nguyen13-0/+26
None of the SoCFPGA platforms will support EFI/ISO partition types that is needed for DISTRO_DEFAULTS. SoCFPGA bootroom will only support 0xa2 partition type. This is needed to help limit the size of the SPL to within the 64k limit that is required for SoCFPGA. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-04-17configs: socfpga: add DM_RESETDinh Nguyen12-0/+12
Add the DM reset driver to socfpga defconfigs. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-04-17i2c: designware: add reset ctrl to driverDinh Nguyen1-0/+10
Add code to look for a reset manager property. Specifically, look for the reset-names of 'i2c'. A reset property is an optional feature, so only print out a warning and do not fail if a reset property is not present. If a reset property is discovered, then use it to deassert, thus bringing the IP out of reset. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-04-17arm: dts: socfpga: add reset propertyDinh Nguyen1-0/+8
Add reset dts property to the i2c nodes. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-04-17arm: dts: socfpga: enables i2c0 in socfpga_de0_nanoDinh Nguyen2-0/+16
Add all the appropriate i2c alias in the base socfpga dtsi and enables the i2c node on the DE0 NANO board. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-04-17configs: socfpga: convert i2c to dmDinh Nguyen12-0/+13
Enable DM I2C driver on SoCFPGA platforms. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-04-17reset: socfpga: add reset driver for SoCFPGA platformDinh Nguyen3-0/+113
Add a DM compatible reset driver for the SoCFPGA platform. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-04-17ARM: dts: stratix10: Add base dtsi and devkit dtsDinh Nguyen3-0/+474
From the Linux v4.16-rc4, add the base dtsi and devkit dts files for the Stratix10 SoCFPGA platform. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-04-17ARM64: stratix10: add reset manager includesDinh Nguyen1-0/+97
Pulled from linux v4.16-rc4. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-04-17arm: socfpga: stratix10: Add base address map for Statix10 SoCChin Liang See1-0/+33
Add the base address map for Stratix10 SoC Signed-off-by: Chin Liang See <chin.liang.see@intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2018-04-17ARM: rmobile: Ignore U-Boot env when started via JTAG on PorterMarek Vasut1-0/+16
When U-Boot is started via JTAG, ignore the installed environment as it may interfere with the recovery of the board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-17ARM: rmobile: Ignore U-Boot env when started via JTAG on StoutMarek Vasut1-0/+15
When U-Boot is started via JTAG, ignore the installed environment as it may interfere with the recovery of the board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-17ARM: rmobile: Enable fitImage support on Gen3Marek Vasut7-0/+7
Enable fitImage support to be on the right side of the millenium. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-17ARM: rmobile: Disable SDHI on R8A77970 V3M EagleMarek Vasut1-6/+2
The SDHI is not routed to a slot on the Eagle, so disable it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-17ARM: rmobile: Enable RPC QSPI on R8A77970 V3M EagleMarek Vasut3-0/+35
Enable the RPC QSPI driver on R8A77970 V3M Eagle and configure the environment layout to match that used by old U-Boot. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-17ARM: rmobile: Add Renesas RPC HF/QSPI DT nodesMarek Vasut5-0/+40
Add device tree nodes for the Renesas RPC HF/QSPI controller. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-04-17mmc: mv_sdhci: zero out sdhci_host structureMatt Pelland1-1/+1
The mv_sdhci driver was not zeroing the sdhci_host structure it allocates causing random access violations in parts of the mmc core where the "ops" member pointers are checked and called if not NULL. Signed-off-by: Matt Pelland <mpelland@starry.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2018-04-16Prepare v2018.05-rc2v2018.05-rc2Tom Rini1-1/+1
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-16serial: Remove duplicated line in MakefilePatrice Chotard1-1/+0
The line "-obj-$(CONFIG_STM32_SERIAL) += serial_stm32.o" is found twice in Makefile. Fixes: ae74de0dfd45 ("serial: stm32: Rename serial_stm32x7.c to serial_stm32.c" Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Vikas Manocha <vikas.manocha@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-16doc: Update git-mailrc entry for lukma (lukma@denx.de)Lukasz Majewski1-1/+1
Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-04-16env: mmc/fat/ext4: undefined reference to `mmc_initialize'Heinrich Schuchardt2-0/+4
For CONFIG_ENV_FAT_INTERFACE != 'mmc' a link error env/fat.c:93: undefined reference to `mmc_initialize' occurs if CONFIG_MMC_SUPPORT is not enabled. Fixes: 26862b4a40c3 ("env: mmc/fat/ext4: make sure that the MMC sub-system is initialized before using it") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-04-16env: Relocate env drivers if manual reloc is requiredSiva Durga Prasad Paladugu3-0/+27
Relocate env drivers if manual relocation is enabled. This patch fixes the issue of u-boot hang incase if env is present in any of the flash devices. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-04-16Kconfig: Enlarge default SYS_MALLOC_F_LEN for AM33XXSjoerd Simons1-0/+1
Since commit 8e14ba7bd524 ("gpio: omap_gpio: Add DM_FLAG_PRE_RELOC flag") omap GPIO gets bound before relocation. Unfortunately due to this, on at least the beaglebone black, the pre-relocation memory pool gets exhausted before probing the serial port. This then causes u-boot to panic as CONFIG_REQUIRE_SERIAL_CONSOLE is set... Resolve this by resizing the default size of the pre-relocation malloc pool for AM335X platforms. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
2018-04-16part: Disable CONFIG_SPL_ISO_PARTITION by defaultAlexander Graf179-179/+0
We enabled CONFIG_ISO_PARTITION by default for distro boot, so that U-Boot could load distro images that usually get shipped as iso images. These images usually come with a board agnostic boot environment. However, there is very little point in having ISO support enabled (for anyone really) in SPL, as the whole idea of SPL is to load U-Boot proper which again is board specific. So the fact that we enable ISO support in U-Boot proper does not mean at all that we want ISO support in U-Boot SPL. Hence, let's remove the Kconfig dependency. Along the way, let's also clean up all those default configs that disabled SPL ISO support. Signed-off-by: Alexander Graf <agraf@suse.de>
2018-04-16Merge git://git.denx.de/u-boot-x86Tom Rini26-298/+465
2018-04-16x86: Rename coreboot-x86 to corebootSimon Glass3-2/+2
We only use coreboot as a target on x86 platforms, since on ARM platforms U-Boot always runs as the primary boot loader. Rename the coreboot-x86 platform to reflect this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-04-16doc: vxworks: Update x86 specific instructionsBin Meng1-2/+19
This updates the doc of booting VxWorks, like loading an x64 kernel, and how to make VxWorks graphics console driver work. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2018-04-16bootvx: x86: Assign bootaddr based on kernel memory baseBin Meng2-41/+49
On VxWorks x86 its bootline address is at a pre-defined offset @ 0x1200. If 'bootaddr' is not passed via environment variable, we assign its value based on the kernel memory base address. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2018-04-16bootvx: Exit if bootline address is not specifiedBin Meng1-56/+53
Exit the 'bootvx' command if bootline address is not specified. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2018-04-16bootvx: Refactor the bootline copy codes a little bitBin Meng1-10/+5
There is a small duplication in do_bootvx() that does the bootline copy. Refactor this a little bit to make it simpler. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-07-15 18:10:27 +0000