aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-04-17arm: am57xx: cl-som-am57x: remove board supportUri Mashiach12-1685/+0
U-Boot support for the CL-SOM-AM57x module is no longer required. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
2019-04-17Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini53-956/+1493
- Convert DM_MMC and DM_SCSI - A20, R40, H6 Linux dts(i) sync - CLK, RESET support for sunxi, sun8_emac net drivers
2019-04-17Merge tag 'xilinx-for-v2019.07' of git://git.denx.de/u-boot-microblazeTom Rini16-82/+65
Xilinx/FPGA changes for v2019.07 fpga: - Add support for external data in FIT - Extend testing for external data case - Inform user about a need to run post config on Zynq arm: - Tune zynq command functions - Fix internal variable setting arm64: - Add support for zc39dr decoding - Disable WDT for zcu100 - Small changes in reset_reason() - Some DT changes (spi) - Tune qspi-mini configuration - Remove useless eeprom setting - Fix two sdhci boot case spi: - Fix tap delay programming clk: - Enable i2c in SPL net: - Fix gem phydev handling - Remove phy detection code from gem driver general: - Correct EXT_DTB usage for MULTI_DTB_FIT configuration
2019-04-17Merge tag 'uniphier-v2019.07' of git://git.denx.de/u-boot-uniphierTom Rini9-19/+161
UniPhier SoC updates for v2019.07 - Sync DT with Linux 5.1-rc4 - Enable CONFIG_SUPPORT_EMMC_RPMB for uniphier_v8_defconfig
2019-04-17sunxi: update SATA driver to always use DM_SCSIAndre Przywara6-20/+9
It seems like the Allwinner SATA driver is already quite capable of using the driver model, so we can force this on all boards and can remove support for a non-DM_SCSI build. This removes the warning about boards with SATA ports not being DM_SCSI compliant. It also takes the opportunity to move the driver out of the board/sunxi directory to join its siblings in drivers/ata, and to make it a proper Kconfig citizen. The board defconfigs stay untouched. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> [jagan: select DM_SCSI separately] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17arm: sunxi: Enable DM_MMC and DM_SCSIJagan Teki2-13/+2
- Enable DM_MMC if MMC defined - Enable DM_SCSI if SCSI defined globally through Allwinner platform, the effected SoC families and boards will make use of MMC and SCSI subsystems in driver-model. Tested DM_MMC in one board from A64, H6, H5, H3, R40, A83T, A20, A10 SoCs. Tested-by: Pablo Sebastián Greco <pgreco@centosproject.org> # BPI-M2-Ultra Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17ARM: dts: sun8i-r40-bananapi-m2-berry: Enable AHCIJagan Teki1-0/+18
Enable ahci node for BPI-M2-Berry, this would require since we have DM_SCSI enabled on the respective SoC. Unable to sync the same node from Linux, since the similar change is still in Linux ML. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17ARM: dts: a20-wits-pro-a20-dkt: Enable AHCIJagan Teki1-0/+10
Enable ahci node for a20-wits-pro-a20-dkt, this would require since we have DM_SCSI enabled on the respective SoC. Right now, ahci enabled in -u-boot.dtsi and will remove once same supported by Linux. Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17ARM: dts: a20-m5: Enable AHCIJagan Teki1-0/+4
Enable ahci node for sun7i-a20-m5.dts, this would require since we have DM_SCSI enabled on the respective SoC. No need to send patch to Linux for this change, since this dts is U-Boot specific. Cc: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17board: sunxi: Add R40 sata compatibleJagan Teki1-0/+1
Add sata compatible for R40. Cc: Pablo Sebastián Greco <pgreco@centosproject.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2Jagan Teki33-836/+369
Sync sun7i-a20 dts(i) files from Linux 5.1-rc2 Linux commit details about the sun7i-a20* sync: "ARM: dts: sun7i: bananapi: Add GPIO banks regulators" (sha1: 09c6572290f018d73ec2e812e28bada34d41815f) Here are U-Boot specific dts changes. - s/uart0_pins_a/uart0_pb_pins for sun7i-a20-ainol-aw1.dts sun7i-a20-m5.dts sun7i-a20-primo73.dts sun7i-a20-yones-toptech-bd1078.dts sunxi-itead-core-common.dtsi - s/gmac_pins_mii_a/gmac_rgmii_pins for sun7i-a20-m5.dts - drop i2c0, i2c1 pins from sunxi-itead-core-common.dtsi - drop mmc0 pins from sun7i-a20-primo73.dts Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17arm: allwinner: r40: Sync R40 dts(i) files from Linux 5.1-rc2Jagan Teki3-8/+449
Sync sun8i-r40 dts(i) files from Linux 5.1-rc2 Linux commit details about the sun8i-r40* sync: "ARM: dts: sun8i: r40: bananapi-m2-ultra: Add Bluetooth device node" (sha1: 1e5f1db4ccd8348a21da55bff82f4263000879ef) Linux commit details about the sun8i-v40* sync: "ARM: dts: sunxi: Fix I2C bus warnings" (sha1: 0729b4af5753b65aa031f58c435da53dbbf56d19) Cc: Pablo Sebastián Greco <pgreco@centosproject.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-17ARM: uniphier_v8: enable CONFIG_SUPPORT_EMMC_RPMBMasahiro Yamada1-0/+1
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-04-17ARM: dts: uniphier: sync with Linux 5.1-rc4Masahiro Yamada8-19/+160
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-04-16board: sunxi: gmac: Remove Ethernet clock and resetJagan Teki1-8/+0
Since Ethernet clock and reset is now handling via CLK and RESET frameworks via driver API's remove explicit ccm writes. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-16net: sun8i_emac: Add CLK and RESET supportJagan Teki1-15/+42
Add CLK and RESET support for sun8i_emac driver to enable TX clock and reset pins via CLK and RESET framework. Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Lothar Felten <lothar.felten@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-04-16net: sun8i_emac: Retrieve GMAC clock via 'syscon' phandleJagan Teki1-28/+27
Unlike other Allwinner SoC's R40 GMAC clock control register is locate in CCU, but rest located via syscon itself. Since the phandle property for current code look for 'syscon' and it will grab the respective ccu or syscon base address based on DT property defined in respective SoC dtsi. So, use the existing 'syscon' code even for R40 for retrieving GMAC clock via CCU and update the register directly in sun8i_emac_set_syscon instead of writing it separately using ccm base. Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Lothar Felten <lothar.felten@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-16net: sunxi_emac: Add CLK supportJagan Teki1-6/+22
Add CLk support for sunxi_emac to enable AHB_EMAC clock via CLK framework. Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-04-16clk: sunxi: r40: Fix GMAC reset reg offsetJagan Teki1-1/+2
GMAC reset reg offset added by below commit seems to assume it as EMAC but R40 indeed using GMAC. "clk: sunxi: Implement EMAC, GMAC clocks, resets" (sha1: 68620c9698f109c1f001f80d282138a5c67cabef) So, fix by updating the reg offset for RST_BUS_GMAC. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-16arm64: zynqmp: fix preprocessor check for SPL_ZYNQMP_TWO_SDHCILuca Ceresoli1-1/+1
A missing CONFIG_ prefix while checking for this Kconfig variable makes the check always fail. Fix it. While there also switch from the '#if defined' form to the '#ifdef' form as the other checks in this function. Fixes: 35e2b92344b1 ("arm64: zynqmp: Fix logic around CONFIG_ZYNQ_SDHCI") Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16arm64: zynqmp: Remove eeprom settingMichal Simek1-9/+0
By moving to DM_I2C there is no need to specify any eeprom configuration because it is read from DT. Reported-by: Sreeja Vadakattu <sreeja.vadakattu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16net: gem: Remove phy autodetection codeMichal Simek1-48/+0
There is no reason to detect phy when core is doing it for us. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16net: zynq_gem: Modify phy supported features after max-speed was setSiva Durga Prasad Paladugu1-2/+3
The phydev supported features were reset in phy_set_supported() so, move the setting of driver supported features after this so that it wont lost in phy_set_supported(). Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16Makefile: Prioritize external dtb if definedMichal Simek1-0/+5
Prioritize external dtb if its passed via EXT_DTB than the dtb that was built in the tree. With this patch it appends the specified external dtb to the u-boot image. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-16arm: zynq: Add an info message about post configSiva Durga Prasad Paladugu1-0/+2
Post configuration cant be run at u-boot as u-boot didn't has any info about the design.So,this patch adds an info message that post config was not run and needs to be run manually if needed. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16arm64: zynqmp: Add idcode for new RFSoC silicon ZU39DRSiva Durga Prasad Paladugu1-0/+4
This patch adds "zu39dr" to the list of zynqmp devices The zu39DR is the new RFSoC silicon with id value of 0x66. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16ARM: zynq: fix environment command syntaxMelin Tomas1-4/+4
Update EXTRA_ENV_SETTINGS and related commands to use 'setenv' instead of short name 'set' in commands. E.g. in case command setexpr is enabled the short form does not work properly as the name becomes ambigous. Fixes error messages like: U-Boot> set Unknown command 'set' - try 'help' Signed-off-by: Tomas Melin <tomas.melin@vaisala.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16ARM: zynq: Add missing i2c get_rate for fixing i2c SPLHannes Schmelzer1-0/+2
The commit 'f48ef0d81aa837a33020f8d61abb3929ba613774' did break I2C support because requesting the clock for the I2C ip-block isn't supported during SPL. To fixup this we add support requesting clocks for: - i2c0 - i2c1 Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16arm64: xilinx: zynqmp: Remove unneeded configsSiva Durga Prasad Paladugu1-0/+2
Remove unneeded configs from mini qspi configuration so that it saves space for this mini configuration. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16arm64: zynqmp: Define label for flash nodeSiva Durga Prasad Paladugu1-1/+1
Define a label for flash node so that it can be referenced easily as required. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16arm64: zynqmp: Add spi-flash compatible string to flash nodeSiva Durga Prasad Paladugu1-1/+1
spi-flash compatible string is needed for reading tx and rx bus widths, hence add this compatible string to flash node. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16arm64: zynqmp: Add debug message about clearing BSSMichal Simek1-0/+1
Just have better view on system. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16ARM: zynq: Check zynq aes & rsa command parameters countT Karthik Reddy1-1/+8
This patch checks for zynq aes & rsa commands max parameters count. Also checks minimum number of parameters count for aes command. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16arm64: zynqmp: Use zynqmp_mmio_read/write functionsT Karthik Reddy1-6/+10
Changed the return type of reset_reason() to int from u32, because zynqmp_mmio_read/write() returns signed value on error. Replaced readl and writel functions with zynqmp_mmio_read & zynqmp_mmio_write functions to access RESET_REASON(CRL_APB) registers. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16spi: zynqmp_gqspi: Fix tap delay values at 100MHz and 150MHzSiva Durga Prasad Paladugu1-2/+2
This patch fixes the tap delay values to be set at 100MHz and 150MHz as per TRM by fixing the if condition to use <= instead of <. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16arm64: zynqmp: Disable WDT for zcu100Michal Simek1-2/+0
Do not enable WDT by default on this target because distributions are not enabling watchdog driver to service it. Feature has been enabled by: "arm64: zynqmp: Enable cadence WDT for zcu100" (sha1: 767afebbcda59f3ccb04f6c94de8cab2fb7905b6) And WDT is still enabled in rebranded Avnet Ultra 96 board support. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16test: py: Extend fpga test with fit image with external dataMichal Simek1-0/+13
Images are created mkimage -f fit.its -E download-fit-external.ub and test expects these entries. env__fpga_under_test = { ... "mkimage_fit_external": download-fit-external.ub", "mkimage_fit_external_size": xxxxx, ... } Test download file and loads it to fpga. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-16fpga: Replace char * with const char * for filenameTien Fong Chee2-2/+3
Ensure the string for filename is always constant, otherwise it can be corrupted by the writing. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-16fpga: Add support for getting external data address and lengthTien Fong Chee1-3/+3
This function supports getting both data address and length for existing FPGA subimage and FPGA external data. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-04-15Merge tag 'u-boot-imx-20190415' of git://git.denx.de/u-boot-imxTom Rini159-2790/+4798
Move to DM ----------- - DM support in sata - Toradex Board to DM - wandboard to DM - tbs2910 to DM - GE boards to DM - VHybrid boards to DM - DM_VIDEO for i.MX
2019-04-15Merge tag 'efi-2019-07-rc1-2' of git://git.denx.de/u-boot-efiTom Rini14-95/+140
Pull request for UEFI sub-system for v2019.07-rc1 (2) In the aarch64 crash dump information about the loaded EFI images is added. In README.uefi the development target is for the UEFI subsystem is described as "Embedded Base Boot Requirements (EBBR) Specification" compliance. Several bug fixes are supplied.
2019-04-15Merge tag 'video-for-2019.07-rc1' of git://git.denx.de/u-boot-videoTom Rini9-24/+138
- optional backlight PWM polarity config via polarity cell - bug fix for ASCII characters > 127 - ANSI sequence handling extensions (implement clear line, reverse video and relative cursor movement commands) - preparation for doing character set translations - left/right and up/down arrow keys translation to ANSI control sequences for cursor movement to fix selection with an USB keyboard in bootmenu - CONFIG_SYS_WHITE_ON_BLACK font scheme configuration for sunxi boards
2019-04-14board: tbs2910: Remove CMD_FDT support in defconfig to reduce u-boot sizeSoeren Moch1-0/+1
This fixes the build failure "u-boot.imx exceeds file size limit". Signed-off-by: Soeren Moch <smoch@web.de>
2019-04-14arm64: allwinner: sun50i: Sync H6 dts(i) files from LinuxJagan Teki4-21/+538
Usually the Linux dts changes were synced in specific tags in Allwinner, to keep track for whats been synced so-far and plan for future syncs. But this patch sync sun50i-h6* dts(i) files from Linux w/o any specific tag since these dts(i) changes are required for new H6 boards support. Linux commit details about the sun50i-h6* sync: "arm64: dts: allwinner: h6: move MMC pinctrl to dtsi" (sha1: 6ba2e45d57afdfd982d12f168edd6a79a65075d8) Linux commit details about the sun8i-tcon-top.h sync: "dt-bindings: display: sunxi-drm: Add TCON TOP description" (sha1: 59a9c39544cd1e5952c2a33028d71aa8180648f8) Part of the sync initiated by 'Clément Péron'. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-04-14sunxi: allow boards to de-select SYS_WHITE_ON_BLACK font schemeAndre Przywara2-2/+1
In the sunxi-common.h config header we unconditionally define CONFIG_SYS_WHITE_ON_BLACK, although it's actually a Kconfig option which could be individually selected by a user. Remove this #define from the header and let it default to "y" on sunxi boards (like we do for other platforms). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-14usb: kbd: Properly translate up/down arrow keysAndre Przywara1-1/+23
So far arrows key pressed on an USB keyboard got translated to some low ASCII control sequences (Ctrl+N, Ctrl+P). Some programs understand these codes, but the standard for those keys is to use ANSI control sequences for cursor movement (ESC [ A). Our own boot menu is a victim of this, currently we cannot change the selection with an USB keyboard due to this. Since we already implement a queue for USB key codes, we can just insert the three character ANSI sequence into the key buffer. This fixes the bootmenu, and is more universal for other users (UEFI) as well. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-14video/console: Factor out actual character outputAndre Przywara1-15/+27
In preparation for doing character set translations, factor out the actual glyph display functionality into a separate function. This will be used in a subsequent patch. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-14video/console: Implement ANSI clear line commandAndre Przywara1-0/+19
There is a standard ANSI terminal escape sequence to clear a whole line of text. So far the DM_VIDEO console was missing this code. Detect the sequence and use vidconsole_set_row with the background colour to fix this omission. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-14video/console: Implement relative cursor movement ANSI handlingAndre Przywara1-0/+37
The ANSI terminal escapce sequence standard defines relative cursor movement commands (ESC [ A-F). So far the DM_VIDEO console code was ignoring them. Interpret those sequences and move the cursor by the requested amount of rows or columns in the right direction. This brings the code on par with the legacy video console driver (cfb_console). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-04-14video/console: Implement reverse video ANSI sequence for DM_VIDEOAndre Przywara3-2/+14
The video console for DM_VIDEO compliant drivers only understands a very small number of ANSI sequences. First and foremost it misses the "reverse video" command, which is used by our own bootmenu command to highlight the selected entry. To avoid forcing people to use their imagination when using the bootmenu, let's just implement the rather simple reverse effect. We need to store the background colour index for that, so that we can recalculate both the foreground and background colour pixel values. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> [agust: merged BG color escape seq change to fix "ut dm video_ansi" test] Signed-off-by: Anatolij Gustschin <agust@denx.de>
generated by cgit v1.1 at 2024-07-15 23:13:23 +0000