aboutsummaryrefslogtreecommitdiff
AgeCommit message (Expand)AuthorFilesLines
2017-03-17arm: imx6: tqma6: use CONFIG_TQM6x for SOM specific settingsMarkus Niebel2-10/+11
2017-03-17i.MX6Q: isiot: Switch the mmc env based on devnoJagan Teki1-0/+6
2017-03-17i.MX6Q: icorem6_rqs: Add mmc_late_initJagan Teki2-2/+22
2017-03-17i.MX6Q: icorem6_rqs: Add modeboot env via board_late_initJagan Teki4-16/+36
2017-03-17imx6: icorem6_rqs: Add eMMC boot supportJagan Teki2-3/+23
2017-03-17mx6: tqma6: clear enet clk sel for mba6Markus Niebel1-0/+5
2017-03-17imx6: tqma6: adjust ethernet phy reset delayMarkus Niebel1-2/+2
2017-03-17imx6: tqma6: disable spi CS unused in U-BootMarkus Niebel1-22/+0
2017-03-17imx6: tqma6: use lower driver stength for I2C pinsMarkus Niebel2-2/+2
2017-03-17imx6: tqma6: implement power_init_boardMarkus Niebel1-10/+12
2017-03-17imx6: icorem6_rqs: Update SPL board boot order for eMMCJagan Teki1-0/+26
2017-03-17arm: dts: imx6qdl-icore-rqs: Add eMMC nodeJagan Teki1-0/+22
2017-03-17i.MX6UL: isiot: Switch the mmc env based on devnoJagan Teki1-0/+6
2017-03-17i.MX6UL: isiot: Add mmc_late_initJagan Teki2-2/+22
2017-03-17i.MX6UL: isiot: Add modeboot env via board_late_initJagan Teki5-20/+40
2017-03-17i.MX6UL: isiot: Add eMMC boot supportJagan Teki6-2/+145
2017-03-17imx6: isiotmx6ul: Update SPL board boot order for eMMCJagan Teki1-0/+26
2017-03-17imx6: Add src_base structure define macroJagan Teki4-9/+6
2017-03-17imx: Use IMX6_BMODE_* macros instead of numericalsJagan Teki2-15/+60
2017-03-17imx: spl: Update NAND bootmode detection bitJagan Teki1-2/+2
2017-03-17imx6: Add imx6_src_get_boot_modeJagan Teki3-2/+28
2017-03-17i.MX6: engicam: Include dts files under MAINTAINERSJagan Teki3-0/+7
2017-03-17imx6ul: isiotmx6ul: Enable I2C supportJagan Teki1-0/+2
2017-03-17imx6: isiotmx6ul: Add nandboot env supportJagan Teki2-1/+32
2017-03-17imx6: isiotmx6ul: Add NAND supportJagan Teki6-2/+186
2017-03-17imx6: isiotmx6ul: Add FEC supportJagan Teki3-0/+14
2017-03-17arm: dts: imx6ul-isiot: Add FEC nodeJagan Teki1-0/+22
2017-03-17imx6: isiotmx6ul: Add I2C supportJagan Teki2-0/+3
2017-03-17arm: dts: imx6ul-isiot: Add I2C nodesJagan Teki1-0/+28
2017-03-17arm: imx6ul: Add Engicam Is.IoT MX6UL Starter Kit initial supportJagan Teki11-1/+632
2017-03-17configs: imx6: Don't define USDHC2_BASE_ADDRJagan Teki2-2/+2
2017-03-17imx: mx7ulp_evk: enable mmc/regulator supportPeng Fan3-1/+106
2017-03-17imx: imx7ulp: add EVK board supportPeng Fan13-0/+1064
2017-03-17mmc: fsl_esdhc: support i.MX7ULPPeng Fan1-0/+8
2017-03-17arm: dts: add i.MX7ULP dtsi filePeng Fan3-0/+1641
2017-03-17mx7ulp: Add HAB boot supportPeng Fan4-1/+21
2017-03-17serial: lpuart: add i.MX7ULP supportPeng Fan2-9/+176
2017-03-17serial: lpuart: restructure lpuart driverPeng Fan6-235/+148
2017-03-17i2c: lpi2c: add lpi2c driver for i.MX7ULPPeng Fan4-0/+989
2017-03-17pinctrl: Add i.MX7ULP pinctrl driverPeng Fan5-4/+65
2017-03-17wdog: Add the watchdog driver for MX7ULP.Ye Li3-0/+107
2017-03-17mx7ulp: Add iomux pins header fileYe Li1-0/+910
2017-03-17mxc_ocotp: Update driver to support OCOTP controller on i.MX7ULPPeng Fan2-1/+53
2017-03-17gpio: Add Rapid GPIO2P driver for i.MX7ULPPeng Fan4-0/+254
2017-03-17imx: mx7ulp: Implement the clock functions for i2c driverYe Li2-0/+44
2017-03-17imx: mx7ulp: Add soc level initialization codes and functionsPeng Fan6-2/+268
2017-03-17imx: mx7ulp: Add clock framework and functionsPeng Fan7-1/+2441
2017-03-17imx: mx7ulp: add iomux driver to support IOMUXC0 and IOMUXC1Peng Fan3-0/+173
2017-03-17imx: mx7ulp: add registers header filePeng Fan1-0/+1120
2017-03-17imx: mx7ulp: Add mx7ulp to KconfigPeng Fan3-1/+15
generated by cgit v1.1 at 2024-07-15 04:50:40 +0000