aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-04-08mmc: mvebu: convert to driver modelHarm Berntsen3-136/+193
This is a straightforward conversion of the old, non-dm driver. It was done in-place as the deadline for non-dm MMC has passed. Previous commits ensured that no board depends on the old, non-dm variant. Tested on a Kirkwood based board with eMMC. Signed-off-by: Harm Berntsen <harm.berntsen@nedap.com> Tested-by: Harm Berntsen <harm.berntsen@nedap.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> CC: Pantelis Antoniou <panto@antoniou-consulting.com> CC: Stefan Roese <sr@denx.de> CC: Gerald Kerma <drEagle@doukki.net> CC: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-08configs: remove obsolete CONFIG_MVEBU_MMCHarm Berntsen1-1/+0
All usages of this have been removed Signed-off-by: Harm Berntsen <harm.berntsen@nedap.com> Reviewed-by: Simon Glass <sjg@chromium.org> CC: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-08configs: remove obsolete CONFIG_SYS_MMC_BASEHarm Berntsen1-1/+0
All usages of this have been removed Signed-off-by: Harm Berntsen <harm.berntsen@nedap.com> Reviewed-by: Simon Glass <sjg@chromium.org> CC: Simon Glass <sjg@chromium.org>
2021-04-08arm: kirkwood: remove non-dm MMC driver initHarm Berntsen1-7/+0
No board uses this driver any more: remove it. Signed-off-by: Harm Berntsen <harm.berntsen@nedap.com> Reviewed-by: Stefan Roese <sr@denx.de> CC: Gerald Kerma <drEagle@doukki.net> CC: Stefan Roese <sr@denx.de> CC: Pantelis Antoniou <panto@antoniou-consulting.com>
2021-04-08configs: sheevaplug: remove non-dm MMC driverHarm Berntsen1-8/+0
This will be replaced with the driver model version Signed-off-by: Harm Berntsen <harm.berntsen@nedap.com> Reviewed-by: Stefan Roese <sr@denx.de> CC: Prafulla Wadaskar <prafulla@marvell.com> CC: Stefan Roese <sr@denx.de> CC: Tom Rini <trini@konsulko.com>
2021-04-08configs: openrd: remove non-dm MMC driverHarm Berntsen1-5/+0
Unfortunately this board has no DM support at all. We are also way past the deadline for driver model support for various devices on this board. Signed-off-by: Harm Berntsen <harm.berntsen@nedap.com> Reviewed-by: Stefan Roese <sr@denx.de> CC: Stefan Roese <sr@denx.de>
2021-04-08configs: remove unused CONFIG_SYS_MMC_BASE defsHarm Berntsen4-20/+0
These boards use an MMC driver that does not use this definition Signed-off-by: Harm Berntsen <harm.berntsen@nedap.com> Reviewed-by: Stefan Roese <sr@denx.de> CC: Stefan Roese <sr@denx.de> CC: Mario Six <mario.six@gdsys.cc> CC: Dennis Gilmore <dgilmore@redhat.com>
2021-04-08arm: mvebu: ds414: Add sample u-boot update commandPhil Sutter1-1/+6
Call 'run update_uboot' to fetch u-boot-spl.kwb via TFTP and write it into the correct SPI flash location. The latter's size is defined in DS414's DTB file, so hard-coding it should be acceptable here. Take care to not append garbage from RAM to the written image and to stay within assigned flash boundaries even if an oversized image was fetched. Signed-off-by: Phil Sutter <phil@nwl.cc>
2021-04-08arm: mvebu: ds414: Auto-populate env if appropriatePhil Sutter4-7/+32
Define a misc_init_r() which calls "syno populate_env" if the environment seems incomplete (or default), indicated by missing "ethaddr" variable. With this in place, no random MAC address fallback is needed anymore. Signed-off-by: Phil Sutter <phil@nwl.cc>
2021-04-08arm: mvebu: board/Synology: Unify legacy kernel supportPhil Sutter8-54/+132
Move the relevant bits from ds109.{c,h} into common/ and adjust the code to fit both DS109 and DS414. Moreover: * Introduce syno_board_id() which translates CONFIG_MACH_TYPE into the expected board ID tag value. * Properly initialize isusbhost, mac and mtu fields from env variables. * Set the right bootargs/bootcmd to correctly boot legacy kernel out of the (DS414) box. Getting the ramdisk location right is a bit tedious. Cc: Walter Schweizer <swwa@users.sourceforge.net> Signed-off-by: Phil Sutter <phil@nwl.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-08arm: mvebu: configs: ds414: Enable XHCI_PCI by defaultPhil Sutter1-0/+3
With the recent fixes in pci_mvebu and xhci-pci drivers, the two rear USB3 ports are finally usable and accessing them no longer hangs the system. Signed-off-by: Phil Sutter <phil@nwl.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-08arm: mvebu: ds414: Add a Kconfig defining some stringsPhil Sutter1-0/+12
A rather cosmetic change to conform with other board definitions. Signed-off-by: Phil Sutter <phil@nwl.cc> Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-08arm: mvebu: turris_omnia: Enable CMD_FS_UUIDMarek Behún1-0/+1
This command can be useful for U-Boot scripts. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Pali Rohár <pali@kernel.org> Acked-by: Pali Rohár <pali@kernel.org>
2021-04-08arm: mvebu: turris_omnia: Enable CMD_WDTMarek Behún1-0/+1
This command can be sometimes used for debugging. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Pali Rohár <pali@kernel.org> Acked-by: Pali Rohár <pali@kernel.org>
2021-04-08arm: mvebu: turris_omnia: Enable DM_RTC and RTC_ARMADA38XMarek Behún1-0/+2
With this the date command is available on Turris Omnia. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Pali Rohár <pali@kernel.org> Acked-by: Pali Rohár <pali@kernel.org>
2021-04-08rtc: add armada38x driverMarek Behún3-0/+192
Add RTC driver for Armada 38x, based on Linux' driver. For now implement only `marvell,armada-380-rtc` compatible. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Pali Rohár <pali@kernel.org> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Chris Packham <judge.packham@gmail.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Pali Rohár <pali@kernel.org>
2021-04-07Merge branch '2021-04-07-CI-improvements'Tom Rini6-59/+231
- Assorted Azure/GitLab improvements - Move the Dockerfile used for making containers in CI in to this repository.
2021-04-07tools: Integrate the Dockerfile used for CITom Rini3-0/+218
Integrate the Dockerfile from https://source.denx.de/u-boot/gitlab-ci-runner.git as of commit bc6130d572f1 ("Dockerfile: Remove high UID/GID") and introduce a short rST on how to build the container. Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-07Azure/GitLab: bump OpenSBI version to 0.9Heinrich Schuchardt2-8/+8
Version 0.9 of OpenSBI provides the system reset extension which allows us to reset and power off boards without board specific code. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-04-07Merge branch '2021-04-07-fs-updates'Tom Rini1-10/+29
- JFFS2 updates
2021-04-07pytest: Lower pygit2 requirementTom Rini1-1/+1
The latest versions of pygit2 are not available in practically any distribution at this time. Furthermore, we don't need the latest in order to run all of our testsuites. Reduce this version requirement to something older that meets our needs while still supporting running our tests on older hosts (and so, test labs). Reported-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-07GitLab: Remove "tags" stanzasTom Rini1-46/+0
Given the structure of our current GitLab tests, we don't make real use of the tags. Furthermore, these tags prevent the automatic usage of the default GitLab runners. Remove these tags. Reported-by: Roger Meier <r.meier@siemens.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-07Azure: Rework SH / Renesas jobTom Rini1-4/+4
Now that there is a single SuperH platform, rework the Azure job slightly. Azure build time limits mean that we need to split the world build up still. Make a single build job for the single Renesas SuperH platform as well as all of the ARM platforms from Renesas. Cc: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-07JFFS2: fix jffs2 summary datacrc status uninitializedWagner Popov dos Santos1-0/+2
The function jffs2_1pass_read_inode() was discarding the summary inodes and dirent because the value in datacrc flag wasn't initialized in function jffs2_sum_process_sum_data(). This fix initializes the status of all summary records to indicate that the CRC needs to be verified when they are loaded. Before this fix, the behaviors produced by the undefined value of datacrc was: - Summary's registries were discarded when 'b->datacrc' is equal as 'CRC_BAD'. - Summary's registries were not checked when b->datacrc differs of 'CRC_BAD' and 'CRC_UNKNOWN' So, almost all of the time the crc just isn't checked, and in some cases the registries are discarded. Signed-off-by: Wagner Popov dos Santos <wpopov@gmail.com>
2021-04-07JFFS2: fix the reading address over nand's limitWagner Popov dos Santos1-10/+27
Fixes address violation in functions read_nand_cached() and read_onenand_cached(). This happens because these functions try to read a fixed amount of data even when the offset+length is above the nand's limit. Signed-off-by: Wagner Popov dos Santos <wpopov@gmail.com>
2021-04-06Merge tag 'mmc-2021-4-6' of https://source.denx.de/u-boot/custodians/u-boot-mmcWIP/06Apr2021Tom Rini8-18/+96
Update hwpartition usage Check bootbus's arguments workaround for erratum A-011334 for fsl_esdhc driver add pulse width detection workaround for fsl_esdhc driver Use alias num before checking mmc index when creating device
2021-04-06Merge https://source.denx.de/u-boot/custodians/u-boot-usbTom Rini3-12/+10
- XHCI fixes
2021-04-06usb: xhci: Make debug output better readable and checkpatch cleanStefan Roese1-6/+3
This change makes debugging a bit easier as the output is better readable with the added space. The explicit le16_to_cpu() is not needed in the output. Also this patch moves the strings into one line to make the patch checkpatch clean. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Aaron Williams <awilliams@marvell.com> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de>
2021-04-06usb: xhci: Add missing xhci_readl()Aaron Williams1-4/+4
Accessing the xHCI controller registers should be done via the xhci_readl/writel functions. This patch adds this to a few missing places. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de>
2021-04-06usb: hub: Fix usb_get_port_status() for big-endian platformsAaron Williams1-2/+3
Add missing endianness conversions to usb_get_port_status(). This (amongst others) is necessary to enable the use of USB 3 hubs on big-endian platforms like MIPS Octeon. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chandrakala Chavva <cchavva@marvell.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de>
2021-04-06Merge tag 'u-boot-amlogic-20210406' of ↵Tom Rini48-307/+624
https://source.denx.de/u-boot/custodians/u-boot-amlogic - Add MMIO MDIO mux driver - Add Amlogic G12A MDIO mux driver - Add DM_MDIO support for designware ethernet driver - Add Amlogic Meson8b and later designware ethernet glue driver - Switch all amlogic boards to Amlogic designware ethernet glue driver - Switch all amlogic boards to DM_MDIO when necessary - Remove all static ethernet setup code
2021-04-06Merge https://source.denx.de/u-boot/custodians/u-boot-marvellTom Rini3-4/+41
- Enhance WDT handling (starting / stopping) and introduce CONFIG_WATCHDOG_AUTOSTART to allow disabling of autostart of the WDT (Pali)
2021-04-06Merge https://source.denx.de/u-boot/custodians/u-boot-cfi-flashTom Rini2-4/+35
- Fix detection of 8-bit bus flash devices via address shift
2021-04-06Merge tag 'dm-pull-6apr21' of https://source.denx.de/u-boot/custodians/u-boot-dmTom Rini45-92/+336
ENOSYS clean-up Minor dtoc improvements Convert CONFIG_MISC_INIT_F to Kconfig Allow unit tests to run on any board pylibfdt build-rule fix
2021-04-06mmc: mmc-uclass: Use dev_seq() to read aliases node's indexAswath Govindraju1-7/+5
Use dev_seq() to read aliases node's index and pass it as device number for creating bulk device. Suggested-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-06mmc: Check for device with a seq number equal to num before checking against ↵Aswath Govindraju1-3/+5
index First check if there is an alias for the device tree node defined with the given num before checking against device index. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-06board: sl28: enable HS400 mode againMichael Walle1-1/+1
Now that it is working reliable on the LS1028A SoC, reenable support for it. Signed-off-by: Michael Walle <michael@walle.cc>
2021-04-06mmc: fsl_esdhc: add pulse width detection workaroundMichael Walle4-1/+12
HS400 mode on the LS1028A SoC isn't reliable. The linux driver has a workaroung for the pulse width detection. Apply this workaround in u-boot, too. This will make HS400 mode work reliably on the LS1028A SoC. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-06mmc: fsl_esdhc: add workaround for erratum A-011334Michael Walle3-1/+28
LS1028A SoCs are restricted in what divider values are allowed for HS400 mode. This is basically a port from the corresponding linux driver. Signed-off-by: Michael Walle <michael@walle.cc>
2021-04-06cmd: mmc: check whether bootbus's arguments is valid or notJaehoon Chung1-1/+38
According to Specification, each bit have valid value. But it doesn't check whether arguments is valid or not. It has potential bug with arguments passed by wrong value. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-06cmd: mmc: modify more readable about hwpartition usageJaehoon Chung1-4/+7
Modified more readable about hwpartition usage. Because it's difficult to understand how to use its command. The arguments didn't optional. mmc hwpartition needs to pass <USER> <GP> <MODE> as arguments. Description about each arguments what is required is the below: USER - <user> <enh> <start> <cnt> <wrrel> <{on|off}> GP - <{gp1|gp2|gp3|gp4}> <cnt> <enh> <wrrel> <{on|off}> MODE - <{check|set|complete}> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-04-06arm: meson: remove static ethernet link setupNeil Armstrong19-215/+2
The static ethernet link type config code is no more needed because now handled by the meson8b glue driver, delete it. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-06arm: meson: remove static ethernet memory power domain enableNeil Armstrong2-6/+0
The ethernet memory power domain is handled by the meson-ee-pwrc driver, delete the static code. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-06net: designware: remove amlogic compatiblesNeil Armstrong1-3/+0
These compatibles are now handled by the dwmac_meson8b glue driver. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-06configs: meson: use Designware glue driver for Amlogic Meson8b & later SoCsNeil Armstrong23-23/+23
Use the proper Synopsys DWMAC Meson8b glue to handle the ethernet link type. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-06arm: meson: remove static MDIO mux handlingNeil Armstrong2-45/+2
The static MDIO mux handling in mach-meson is no more needed, delete it. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-06configs: update Amlogic Meson G12A, G12B & SM1 configs for MDIO MUXNeil Armstrong9-6/+27
Use DM_MDIO and the new G12A MDIO MUX driver for G12A, G12B & SM1 boards. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-06configs: update Amlogic Meson GXL & GXM config for MDIO MUXNeil Armstrong9-10/+27
Use DM_MDIO and the new MMIOREG MDIO MUX driver for GXL & GXM board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-06net: designware: add Amlogic Meson8b & later glue driverNeil Armstrong3-0/+159
This adds a proper glue driver for the Designware DWMAC ethernet MAC IP found in the Amlogic Meson8, GXBB, GXL, GXM, G12A, G12B & SM1 SoCs. This is aimed to replace the static ethernet link setup found on the board init code for the Amlogic SoC based boards. Tested on a libretech-cc (S905x Internal RMII 10/100 PHY) and Khadas VIM3 (A113d with external 10/100/1000 RGMII PHY) to cover the most extreme setups. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-04-06net: add Amlogic Meson G12A MDIO MUX driverNeil Armstrong3-0/+157
The Amlogic G12A & compatible SoCs embeds a mux to either communicate with the external PHY or the internal 10/100 PHY. This adds support for this mux as a MDIO MUX device. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
generated by cgit v1.1 at 2024-07-13 11:22:19 +0000