aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-11-27imx: Also clear powerdown enable bit for WDOG3 on i.MX6ULLFabio Estevam1-1/+1
Clear powerdown enable bit for WDOG3 on i.MX6ULL to avoid unwanted kernel reboots. Suggested-by: Ye Li <ye.li@nxp.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-11-27mx6ull: Fix WDOG3 base addressFabio Estevam1-1/+1
i.MX6ULL has the same WDOG3 base address as i.MX6UL, so take this into account in the base address definition. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-11-20mx6sabreauto: Remove unneeded SPL selectionFabio Estevam1-1/+1
SPL option is already selected via Kconfig, so remove it from the CONFIG_SYS_EXTRA_OPTIONS line. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-11-20mx6: Select MX6QDL option via KconfigFabio Estevam15-14/+25
Currently the MX6QDL option is selected via CONFIG_SYS_EXTRA_OPTIONS, but it is better to select it directly via Kconfig. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-11-20mx53: Add Board support for GE PPDPeter Senna Tschudin10-0/+1105
Create board support for GE PPD, based on mx53loco. Use mx53ppd_defconfig make target to configure for this board. Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com> Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
2017-11-20board: ge: make VPD code commonMartyn Welch6-241/+209
The VPD data is used on a number of GE products. Move the parsing code to a common location so that we can share this code. Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Acked-by: Stefano Babic <sbabic@denx.de>
2017-11-20rtc: add support for s35392aNandor Han4-0/+375
Add support for S35392A RTC. The driver supports both U-Boot driver models. Signed-off-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Cc: Heiko Schocher <hs@denx.de>
2017-11-20bootcount: add support for bootcounter on EXT filesystemIan Ray5-0/+130
Add support for bootcounter on an EXT filesystem. Sync configuration whitelist. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
2017-11-20arm: mx5: Add more register definitionsMartyn Welch2-0/+41
Add register definitions require for video configuration. Signed-off-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Reviewed-by: Stefano Babic <sbabic@denx.de> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-11-20pwm: imx: Enable PWM support on i.MX53Martyn Welch2-0/+19
Add missing parts for i.MX53 PWM support Acked-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
2017-11-20ext4: recover from filesystem corruption when readingIan Ray2-1/+19
Some fixes when reading EXT files and directory entries were identified after using e2fuzz to corrupt an EXT3 filesystem: - Stop reading directory entries if the offset becomes badly aligned. - Avoid overwriting memory by clamping the length used to zero the buffer in ext4fs_read_file. Also sanity check blocksize. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-11-20imx: mxc_i2c: tweak the i2c transfer methodNandor Han1-10/+15
Tweak the i2c transfer to work for devices that want to read data without addressing a register. Signed-off-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Acked-by: Heiko Schocher <hs@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2017-11-20Revert "wandboard: Remove unnecessary delay"Fabio Estevam1-0/+2
This reverts commit b8b9790e23a7d6eec08d66192853ecb61bcae095. Some wandboard variants no longer boot after this commit, so keep the original delay to avoid the boot regression. Reported-by: Varga Zsolt <vazso@vazso.hu> Tested-by: Varga Zsolt <vazso@vazso.hu> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-11-20pico-imx6ul: Use FS_GENERIC load commandFabio Berton1-2/+2
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-11-20pico-imx6ul: Add function to create gpt partitionsFabio Berton2-0/+2
Command run setup_emmc will create gpt partitions for mmc 0 device based on patitions variable. Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-11-20pico-imx6ul: Define partition layout in the environmentFabio Berton1-0/+3
Create layout with a boot 16MiB partition and rootfs with remain space. Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-11-20pico-imx6ul: Add boot and rootfs dfu_alt_infoFabio Berton1-1/+5
Change dfu_alt_info variable to use the following altsetting: uboot: To flash raw U-Boot /zImage: boot: To copy kernel image /imx6ul-pico-hobbit.dtb: To copy dtb file rootfs: To copy rootfs List the currently attached DFU capable USB devices running: sudo dfu-util -l Flash U-Boot: sudo dfu-util -D u-boot.imx -a uboot Copy boot files: sudo dfu-util -D zImage -a /zImage sudo dfu-util -D imx6ul-pico-hobbit.dtb -a /imx6ul-pico-hobbit.dtb Flash rootfs: sudo dfu-util -D rootfs.ext4 -a rootfs To copy boot files you need to have a formated mmc 0:1 partition. To format with ext4 filesystem you can use ums. Run on target: ums 0 mmc 0 and on host: sudo mkfs.ext4 /dev/sdx1 Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-11-20pico-imx6ul: Use PARTUUID to specify the rootfs locationFabio Berton2-3/+4
Currently the rootfs location is passed via mmcblk number and using the UUID method to specify the rootfs location is a better approach working even if mmcblk number for the eMMC changes depending on the kernel versions. Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-11-20pico-imx6ul: Move dfu_alt_info to CONFIG_DFU_ENV_SETTINGS variableFabio Berton1-1/+4
Create CONFIG_DFU_ENV_SETTINGS to set dfu environment settings to improve human readable code. Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2017-11-16ARM: imx6: Adjust DDR DRAM settings on DHCOM i.MX6 PDKMarek Vasut1-20/+20
The board uses T-topology for the four x16 DRAM chips, so remove the write-leveling from the SPL as that is only usefly on fly-by topology and can be harmful on T-topology. Also update the DRAM timing with values from calibration on multiple boards. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2017-11-13Prepare v2017.11v2017.11Tom Rini1-1/+1
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-11-12Revert "console: simplify puts()"Soeren Moch1-2/+42
This reverts commit c61d0009feb966e0e93254a8c435a1889085e6b8. A tbs2910 board user reported a very slow console frambuffer as regression in current u-boot. I could bisect this down to the above mentioned commit. This revert brings back the fast framebuffer console (one cache flush per string in puts(), not after each char). Reported-by: Uwe Scheffler <scheffler.u@web.de> Signed-off-by: Soeren Moch <smoch@web.de> Tested-by: Uwe Scheffler <scheffler.u@web.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-11-12board: sysam: stmark2: add missing environment locationAngelo Dureghello1-0/+1
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
2017-11-12ARM: rmobile: Fix eMMC signal voltage on Salvator-X/XSMarek Vasut1-1/+1
The eMMC is 1V8 device only and the signaling is always 1V8, fix the DT for Salvator-X/XS to describe the hardware correctly. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-11-10Merge git://git.denx.de/u-boot-sunxiTom Rini2-0/+5
2017-11-10sunxi: SATA link timeout fixWerner Böllmann1-0/+2
After updating u-boot from v2016.01 to 2017.09, issue with "SATA link 0 timeout." on my Cubietruck board. mdelay milled after moving satapwr code to board. "sunxi: Turn satapwr on from board_init" (sha1: 9fbb0c3aa49f4604b0342cb527a6bd099f92eaeb) After adding the "mdelay(500);" line that was lost in the path the error is gone. Signed-off-by: Werner Böllmann <Werner.Boellmann@fh-dortmund.de> [Rebased and updated change and commit message] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-11-10net: sun8i_emac: Fix build for non-H3/H5 SoCsChen-Yu Tsai1-0/+3
Only the H3/H5 SoCs have an internal PHY and its related clock and reset controls. Use an #ifdef to guard the internal PHY control code block so it can be built for other SoCs, such as the A83T or A64. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-11-10Merge git://git.denx.de/u-boot-rockchipTom Rini2-6/+6
2017-11-10rockchip: configs: vyasa: Update falcon offsetsJagan Teki1-4/+4
Update the falcon offsets for args to 16MB and kernel to 17MB Since the below commit updated U-Boot proper location along with rockchip boot image offsets "spl: set SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x4000 for rockchip" (sha1: 8f4d62b403db45dfa8b1cadb9da9096c79b7df47) Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-10rockchip: doc: Fix U-Boot proper location for falconJagan Teki1-1/+1
This patch fixed U-Boot proper location has been missed to update in bewlo commit "rockchip: doc: update U-Boot location info" (sha1: 73e6dbe855f357a8330cfd53ff3033303611c1ad) Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-10rockchip: doc: update U-Boot location infoGoldschmidt Simon1-1/+1
The U-Boot location has been moved to block 16384. This is 8MB, not 4MB. Signed-off-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-09Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini4-7/+14
2017-11-09Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini32-45/+1490
2017-11-09imx7: Add include guards for include/asm/arch-mx7/sys_proto.h fileLukasz Majewski1-0/+4
Signed-off-by: Lukasz Majewski <lukma@denx.de>
2017-11-09imx5: Add include guards for include/asm/arch-mx5/sys_proto.h fileLukasz Majewski1-0/+4
Signed-off-by: Lukasz Majewski <lukma@denx.de>
2017-11-09imx6: Add include guards for include/asm/arch-mx6/sys_proto.h fileLukasz Majewski1-0/+5
Signed-off-by: Lukasz Majewski <lukma@denx.de>
2017-11-09imx:display5: Add support for LWN's DISPLAY5 boardLukasz Majewski12-0/+1391
This commit provides support for LWN's IMX6Q based DISPLAY5 board. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2017-11-09imx6: iomux: Add generic function to set RGMII IO voltage on IMX6 SoCsLukasz Majewski2-0/+24
This commit provides generic function to set the RGMII/HSIC IO voltage level on iMX6 devices. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2017-11-09board: imx6: marsboard: Remove doubled #include <asm/arch/sys_proto.h>Lukasz Majewski1-1/+1
The sys_proto.h file has been included earlier in this file. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2017-11-09sunxi: restore PHYLIB for CONFIG_SUN4I_EMAC usersArtturi Alm1-0/+1
due misnaming of CONFIG_SUN4I_EMAC in include/configs/sunxi-common.h, likely missed in: commit 3146f0c017df ("Move PHYLIB to Kconfig") Signed-off-by: Artturi Alm <artturi.alm@gmail.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-11-09sunxi: fix CONFIG_SUNXI_EMAC referencesArtturi Alm2-2/+2
fixes CONFIG_SUNXI_EMAC references from drivers/net/Makefile and include/configs/sunxi-common.h likely forgotten in: commit abc3e4df59f5 ("sunxi: Convert SUNXI_EMAC to Kconfig") Signed-off-by: Artturi Alm <artturi.alm@gmail.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-11-07mmc: fsl_esdhc: Fix PIO timeoutBenoît Thébaudeau2-14/+14
The following error has been observed on i.MX25 with a high-speed SDSC card: Data Write Failed in PIO Mode. It was caused by the timeout set on PRSSTAT.BWEN, which was triggered because this bit takes 15 ms to be set after writing the first block to DATPORT with this card. Without this timeout, all the blocks are properly written. This timeout was implemented by decrementing a variable, so it was depending on the CPU frequency. Fix this issue by setting this timeout to a long enough absolute duration (500 ms). Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-11-07i.MX6: engicam: Fix MAINTAINERS/READMEJagan Teki6-14/+8
- Update newly added include/configs file in MAINTAINERS - Update newly added defconfig file in README Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2017-11-07mx51: Select the ESDHC_A001 erratumFabio Estevam1-1/+1
When a high speed card is connected to mx51evk the following error is seen: U-Boot 2017.11-rc2 (Oct 18 2017 - 13:49:26 -0200) CPU: Freescale i.MX51 rev3.0 at 800 MHz Reset cause: POR Board: MX51EVK DRAM: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - read failed, using default environment In: serial Out: serial Err: serial Net: FEC Hit any key to stop autoboot: 0 => saveenv Saving Environment to MMC... Writing to MMC(0)... failed The root cause for the failure is the eSDHC-A001 erratum: "eSDHC-A001 : Data timeout counter (SYSCTL[DTOCV]) is not reliable for values of 0x4,0x8, and 0xC" that is listed on some PowerArchitecture chips: https://www.nxp.com/files-static/32bit/doc/errata/MPC8379ECE.pdf Even though eSDHC-A001 is not documented on the i.MX51 errata document, I have confirmed with the NXP design team that this erratum does affect i.MX51, so fix the problem by selecting SYS_FSL_ERRATUM_ESDHC_A001 at SoC level. The i.MX51 ts4800 board already selects this option, but it is better to move this selection to the i.MX51 SoC level instead. Successfully tested with a high speed SD card on a mx51evk board. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
2017-11-07mx25: Select the ESDHC_A001 erratumFabio Estevam1-0/+1
When a high speed card is connected to mx25 the following error is seen: U-Boot 2017.11-rc2-00104-gb79372a (Oct 31 2017 - 11:02:22 -0200) CPU: Freescale i.MX25 rev1.2 at 399 MHz Reset cause: POR Board: MX25PDK I2C: ready DRAM: 64 MiB No arch specific invalidate_icache_all available! MMC: FSL_SDHC: 0 *** Warning - read failed, using default environment In: serial Out: serial Err: serial Net: FEC Hit any key to stop autoboot: 0 => saveenv Saving Environment to MMC... Writing to MMC(0)... failed , which prevents any usage of the SD card. The root cause for the failure is the eSDHC-A001 erratum: "eSDHC-A001 : Data timeout counter (SYSCTL[DTOCV]) is not reliable for values of 0x4,0x8, and 0xC" that is listed on some PowerArchitecture chips: https://www.nxp.com/files-static/32bit/doc/errata/MPC8379ECE.pdf Even though eSDHC-A001 is not documented on the i.MX25 errata document, I have confirmed with the NXP design team that this erratum does affect i.MX25, so fix the problem by selecting SYS_FSL_ERRATUM_ESDHC_A001 at SoC level. Successfully tested with a high speed SD card on a mx25pdk board. Suggested-by: Benoît Thébaudeau <benoit@wsystem.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Tested-by: Otavio Salvador <otavio@ossystems.com.br> # mx25pdk
2017-11-07mx25: Move MX25 selection to KconfigFabio Estevam6-15/+37
The motivation for moving MX25 selection to Kconfig is to be able to better handle MX25 specific errata, so that an errata option can be selected at SoC level instead of board level. This selection method also aligns with the way other i.MX SoCs are selected in U-Boot. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2017-11-07rockchip: remove SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR from defconfigKever Yang2-2/+0
Use default value 0x4000 for SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR instead of define a new one. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-07rockchip: doc: update U-Boot location infoKever Yang1-3/+3
Update rockchip U-Boot location to 0x4000/16384. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-07spl: set SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x4000 for rockchipKever Yang1-1/+2
Rockchip use a 'loader2' partition for U-Boot, so u-boot.bin or u-boot.itb load by SPL need to locate at0x4000. Detail here: http://opensource.rock-chips.com/wiki_Boot_option Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-07rockchip: board: puma_rk3399: make env location selectable via KconfigKlaus Goger1-0/+8
The environment storage location is selectable via Kconfig. We support eMMC, SD and SPI-NOR as location for U-Boot. This adds support to store the environment in the SPI-NOR additional to the default eMMC location. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
generated by cgit v1.1 at 2024-07-16 16:05:38 +0000