aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-11-02Merge tag 'u-boot-amlogic-20211102' of ↵WIP/02Nov2021Tom Rini6-3/+125
https://source.denx.de/u-boot/custodians/u-boot-amlogic - add sm efuse write support and cmd for read/write efuse - add JetHub D1 eth mac generation with manufacturer OUI
2021-11-01Prepare v2022.01-rc1v2022.01-rc1Tom Rini1-3/+3
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-01configs: Resync with savedefconfigWIP/01Nov2021Tom Rini725-965/+870
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-01Merge https://source.denx.de/u-boot/custodians/u-boot-x86Tom Rini7-96/+112
- Fixes for x86 build with Clang/LLVM compiler - Tangier ACPI changes - Edison SD card detect pin fix - EFI on x86 doc update with latest instructions - PXE utility fixes to align with latest x86 zboot implementation
2021-11-01x86: tangier: pinmux: Move error message to the callerAndy Shevchenko1-7/+3
Move error message to the caller of mrfld_pinconfig*() in order to unify them in the future. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-11-01x86: tangier: pinmux: Move is_protected assignment closer to its userAndy Shevchenko1-2/+1
Move is_protected assignment closer to its user. This increases readability and makes maintenance easier. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-11-01x86: edison: Don't take SD card detect pin into considerationAndy Shevchenko1-0/+17
There are two PCB designs in the wild which use the opposite signaling for SD card detection. This makes U-Boot working in one case and failing in the other. Quirk this out by disconnecting SD card detection pin from the PCB by switching it to mode 3. In the disconnected state the read value is always the same and inverted to what we are expecting in the code. BugLink: https://github.com/edison-fw/meta-intel-edison/issues/136 Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-11-01x86: tangier: Enable support for SD/SDIO family in the pinmux driverAndy Shevchenko1-5/+34
We would need to quirk out the Card Detect case and for that we allow configuring the SD/SDIO family of pins. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-11-01x86: Fix i8254 ifdef include guardAlistair Delva1-2/+2
When building U-Boot with clang, it notices that the i8254.h include guard does not work correctly due to a typo. Fix it. Signed-off-by: Alistair Delva <adelva@google.com> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: fixed the other same typo at the end of the same file] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2021-11-01x86: chromebook_coral: fix C block commentAlistair Delva1-0/+1
Fix a warning seen when compiling this dts file. Signed-off-by: Alistair Delva <adelva@google.com> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-11-01x86: tangier: Replace Method() by Name() for _STA objectAndy Shevchenko1-64/+17
There is no point to use Method() for the constant. Replace it with Name() defined object. For the _STA case it saves 3 bytes per each entry. Before: 2881 After: 2833 Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-11-01pxe_utils: Clean up {bootm,zboot}_argv generationZhaofeng Li1-18/+27
Signed-off-by: Zhaofeng Li <hello@zhaofeng.li> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-11-01pxe_utils: Fix arguments to x86 zbootZhaofeng Li1-1/+11
bootm and zboot accept different arguments: > bootm [addr [arg ...]] > - boot application image stored in memory > passing arguments 'arg ...'; when booting a Linux kernel, > 'arg' can be the address of an initrd image > zboot [addr] [size] [initrd addr] [initrd size] [setup] [cmdline] > addr - The optional starting address of the bzimage. > If not set it defaults to the environment > variable "fileaddr". > size - The optional size of the bzimage. Defaults to > zero. > initrd addr - The address of the initrd image to use, if any. > initrd size - The size of the initrd image to use, if any. In the zboot flow, the current code will reuse the bootm args and attempt to pass the initrd arg (argv[2]) as the kernel size (should be argv[3]). zboot also expects the initrd address and size to be separate arguments. Let's untangle them and have separate argv/argc locals. Signed-off-by: Zhaofeng Li <hello@zhaofeng.li> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-11-01docs: uefi: Update stale U-Boot on EFI docBin Meng1-5/+7
The existing intructions in the U-Boot on EFI doc do not work with the latest QEMU. Update the doc with the correct instructions, as well as using the new OVMF URL link. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2021-10-31Merge tag 'dm-pull-boo21' of https://source.denx.de/u-boot/custodians/u-boot-dmWIP/31Oct2021Tom Rini35-75/+66
Environment tidy-ups patman 'postfix' support fix binman test race condition causing a timeout error # gpg: Signature made Sun 31 Oct 2021 03:36:55 PM EDT # gpg: using RSA key B25C0022AF86A7CC1655B6277F173A3E9008ADE6 # gpg: issuer "sjg@chromium.org" # gpg: Good signature from "Simon Glass <sjg@chromium.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: B25C 0022 AF86 A7CC 1655 B627 7F17 3A3E 9008 ADE6
2021-10-31bootstage: Add SPL supportMarek Vasut6-5/+14
Allow usage of the bootstage facilities in SPL. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31patman: Add "postfix" support to patch subjectsSean Anderson5-4/+19
In some communities, it may be necessary to append something after PATCH in the subject line. For example, the Linux networking subsystem expects [1] patch subject prefixes like [RFC PATCH net-next 0/99]. This adds support for such "postfix"s to patman. Although entirely cosmetic, it is still nice to have. [1] https://www.kernel.org/doc/html/latest/networking/netdev-FAQ.html#how-do-i-indicate-which-tree-net-vs-net-next-my-patch-should-be-in Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31env: Use static_assert() to check if default_environment is too largeMarek Behún2-5/+6
Check sizeof(default_environment) against ENV_SIZE in a static_assert() instead of runtime. Only check if !USE_HOSTCC (for in fw_env tool ENV_SIZE expands to a variable, and cannot be checked statically) nad !DEFAULT_ENV_INSTANCE_EMBEDDED, for in that case the default_environment variable is not set. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31env: Always use char for default_environmentMarek Behún4-8/+8
Sometimes we use uchar and sometimes char for the default environment array. By always using char, we can get rid of some explicit casts. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31board: freescale: various boards: Let env subsystem set gd->env_addrMarek Behún8-29/+0
Various freescale boards set gd->env_addr to default_environment in board_init(), conditional on CONFIG_ENV_IS_NOWHERE, but this is redundant, since it is done by env_init() before board_init() is called. Let the env subsystem handle this. Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31board: synquacer: developerbox: Don't set gd->env_addr to default_environmentMarek Behún1-2/+0
This board sets gd->env_addr to default_environment in board_init(), but the board has environment in SPI flash according to defconfig. Let the env API handle environment automatically. Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Masami Hiramatsu <masami.hiramatsu@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31env: flash: Cosmetic fixMarek Behún1-1/+1
Change tab to space in env_flash_init(). Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31env: flash: Let generic env_init() assign default environmentMarek Behún1-3/+0
env_flash_init() (both implementations) assigns default environment if ENV_INVALID, but this is done in the generic env_init() function, which calls this initializer, so drop it from here. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31env: nowhere: Cosmetic fixMarek Behún1-2/+2
Use spaces instead of tabs in assignments, since there are no lines to align assignment values to. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31env: nowhere: Let generic env_init() assign default environmentMarek Behún1-1/+0
env_nowhere_init() assigns default environment if ENV_INVALID, but this is done in the generic env_init() function, which calls this initializer, so drop it from here. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31env: nvram: Cosmetic fix in env_nvram_init()Marek Behún1-2/+2
Use spaces consistently in assignments instead of tabs. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31env: nvram: Let generic env_init() assign default environmentMarek Behún1-2/+1
env_nvram_init() assigns default environment if ENV_INVALID, but this is done in the generic env_init() function, which calls this initializer, so drop it from here. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31env: nand: Put ENV_INVALID into gd->env_valid if default environmentMarek Behún1-2/+1
env_nand_init() says the environment is valid even if it is assigning default environment due to not being able to access nand pre-reloaction (determined by macro values). Change this to ENV_INVALID and let the generic env_init() function, which calls this initializer, assign the default environment. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31env: sf: Put ENV_INVALID into gd->env_valid on CRC failureMarek Behún1-2/+1
env_sf_init_addr() says the environment is valid even if it is assigning default environment due to CRC failure. Change this to ENV_INVALID and let the generic env_init() function, which calls this initializer, assign the default environment. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31env: sf: Use ENV_VALID enum names instead of literalsMarek Behún1-2/+2
The function env_sf_init_addr() assigns number literals (1) instead of ENV_VALID to gd->env_valid. Fix this. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31env: sf: Cosmetic fix in env_sf_init_addr()Marek Behún1-2/+2
In the if clause we use tabs and in the else clause spaces. Let's use spaces in the if clause too. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31x86: Fix linking u-boot with ld.lldAlistair Delva1-0/+3
When linking the final u-boot binary with LLD, the following link errors are seen: ld.lld: error: can't create dynamic relocation R_386_32 against local symbol in readonly segment; recompile object files with -fPIC or pass '-Wl,-z,notext' to allow text relocations in the output >>> defined in arch/x86/cpu/start.o >>> referenced by arch/x86/cpu/start.o:(.text.start+0x32) [...] >>> defined in arch/x86/cpu/start16.o >>> referenced by arch/x86/cpu/start16.o:(.start16+0x1C) According to Nick Desaulniers: "This is a known difference between GNU and LLVM linkers; the GNU linkers permit relocations in readonly segments (making them not read only), LLVM does not (by default)." Since U-Boot apparently seems to use relocations in readonly segments, change the global linker flags to permit them when linking with LLD by specifying '-z notext'. Signed-off-by: Alistair Delva <adelva@google.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31sandbox: Migrate ARCH_MAP_SYSMEM to KconfigTom Rini2-1/+3
Move this from a hard-coded define in config.mk to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31binman: Allow timeout to occur in the image or its sectionSimon Glass1-2/+1
At present testThreadTimeout() assumes that the expected timeout happens first when building the section, but it can just as easily happen at the top-level image. Update the test to cope with both. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Behún <marek.behun@nic.cz>
2021-10-31image.h: make image_sign_info.fit point to constHannu Lounento2-2/+2
The data blob apparently does not need to be modified through the fit field of the image_sign_info struct so make it point to const to avoid the need to cast away constness in functions that assign a pointer to const data to the field. fit_image_setup_verify already had to cast away constness as it assigned a const void * argument to the field. The cast can now be removed. Signed-off-by: Hannu Lounento <hannu.lounento@vaisala.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31Merge https://source.denx.de/u-boot/custodians/u-boot-usbTom Rini2-2/+3
- usb_mass_storage, xhci-brcm bugfixes
2021-10-31Merge https://source.denx.de/u-boot/custodians/u-boot-shTom Rini7-176/+32
- rzg2_beacon updates
2021-10-31Merge branch '2021-10-31-assorted-platform-updates'Tom Rini99-189/+4434
- Revert GIC LPI changes that need to be reworked. - mvebu SATA booting bugfix - Samsung Galaxy S9/S9+(SM-G96x0), Samsung Galaxy A and Apple M1 platform support.
2021-10-31board: samsung: add support for Galaxy A series of 2017 (a5y17lte)Dzmitry Sankouski13-0/+316
Samsung Galaxy A3, A5, A7 (2017) - middle class Samsung smartphones. U-boot can be used as chain-loaded bootloader to gain control on booting vanilla linux(and possibly others) kernels Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
2021-10-31SoC: exynos: add support for exynos 78x0Dzmitry Sankouski9-0/+889
Samsung Exynos 7880 \ 7870 - SoC for mainstream smartphones and tablets introduced on March 2017. Features: - 8 Cortex A53 cores - ARM Mali-T830 MP3 GPU - LTE Cat. 7 (7880) or 6 (7870) modem Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
2021-10-31pinctrl: exynos: add support for multiple pin banksDzmitry Sankouski1-6/+22
Iterate all pin banks to find a pin Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
2021-10-31serial: samsung: add support for skip debug init in s5pDzmitry Sankouski1-0/+3
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
2021-10-31board: samsung: add Samsung Galaxy S9/S9+(SM-G96x0) boardDzmitry Sankouski12-7/+220
Samsung S9 SM-G9600 - Snapdragon SDM845 version of the phone, for China \ Hong Kong markets. Has unlockable bootloader, unlike SM-G960U (American market version), which allows running u-boot as a chain-loaded bootloader. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2021-10-31SoC: qcom: add support for SDM845Dzmitry Sankouski7-0/+312
Hi-end qualcomm chip, introduced in late 2017. Mostly used in flagship phones and tablets of 2018. Features: - arm64 arch - total of 8 Kryo 385 Gold / Silver cores - Hexagon 685 DSP - Adreno 630 GPU Tested only as second-stage bootloader. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com> Cc: Stephan Gerhold <stephan@gerhold.net>
2021-10-31clocks: qcom: add clocks for SDM845 debug uartDzmitry Sankouski3-1/+95
Allows to change clock frequency of debug uart, thus supporting wide range of baudrates. Enable / disable functionality is not implemented yet. In most use cases of SDM845 (i.e. mobile phones and tablets) it's not needed, because qualcomm first stage bootloader leaves it initialized, and on the other hand there's no possibility to replace signed first stage bootloader with u-boot. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2021-10-31pinctrl: qcom: add pinctrl and gpio drivers for SDM845 SoCDzmitry Sankouski5-3/+54
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Stephan Gerhold <stephan@gerhold.net> [trini: Add CONFIG_SDM845 around sdm845_data usage]
2021-10-31spmi: msm: add arbiter version 5 supportDzmitry Sankouski2-50/+105
Currently driver supports only version 1 and 2. Version 5 has slightly different registers structure Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2021-10-31serial: qcom: add support for GENI serial driverDzmitry Sankouski5-0/+639
Generic Interface (GENI) Serial Engine (SE) based uart can be found on newer qualcomm SOCs, starting from SDM845. Tested on Samsung SM-G9600(starqltechn) by chain-loading u-boot with stock bootloader. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2021-10-31doc: board: apple: Add Apple M1 documentationMark Kettenis3-0/+69
Provide preliminary instructions on how to get U-Boot to run on Apple Silicon Macs. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31arm: dts: apple: Add preliminary device treesMark Kettenis8-0/+835
Add preliminary device trees for the Apple M1 mini (2020) and Apple M1 Macbook Pro 13" (2020). Device tree bindings for the Apple M1 SoC are still being formalized and these device trees will be synchronized with the Linux kernel as needed. The device trees in this commit are based on the initial Apple M1 device trees from Linux 5.13, nodes for dart, pcie, pinctrl, pmgr, usb based on bindings on track for inclusion in Linux 5.15 and 5.16 and nodes for i2c, mailbox, nvme, pmu, spmi and watchdog that don't have a proposed binding yet. These device trees are provided as a reference only as U-Boot uses the device tree passed by the m1n1 bootloader. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-11-16 02:30:56 +0000