aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-11-03usb: udc: Fix warnings on 64-bit buildsMichal Simek1-1/+1
Cast u32 bit value to 64bit before recasting to 64bit pointer to avoid pointer from integer cast size mismatch warnings. Warning log: +../drivers/usb/gadget/udc/udc-core.c: In function ‘usb_gadget_unmap_request’: +../drivers/usb/gadget/udc/udc-core.c:68:19: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-03usb: lthor: Specify correct parameter for sizeof typeMichal Simek1-1/+1
This patch removes this warning: CC drivers/usb/gadget/f_thor.o drivers/usb/gadget/f_thor.c: In function ‘thor_tx_data’: drivers/usb/gadget/f_thor.c:572:2: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘long unsigned int’ [-Wformat=] debug("%s: dev->in_req->length:%d to_cpy:%d\n", __func__, ^ Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-03usb: dwc3: Fix warnings on 64-bit buildsMichal Simek4-15/+16
Change aritmentics to use 64bit types to be compatible with 64bit builds. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-03ARM: dra7xx_evm: Add DFU support for qspi flashVignesh R1-1/+15
This adds support to update firmware on qspi flash using DFU. On device: => setenv dfu_alt_info ${dfu_alt_info_qspi} => dfu 0 sf 0:0 On host: $ sudo dfu-util -l $ sudo dfu-util -D MLO -a MLO $ sudo dfu-util -D u-boot.img -a u-boot.img Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-03dfu: dfu_sf: Pass duplicate devstr to parse_devVignesh R1-1/+3
parse_dev() alters the string pointed by devstr parameter. Due to this subsequent parsing of sf entities will fail, as string pointed by devstr is no longer valid sf dev arguments. Fix this by passing pointer to the copy of the string to parse_dev instead of pointer to the actual devstr. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-11-03ohci: Add missing cache-flush for hcca areaHans de Goede1-0/+1
We need to cache-flush the hcca area after the initial memset, otherwise on the first hc_interrupt we might see an old $random value as done_head and try to interpret that as the address for a completed td (followed by chaos). Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2015-11-03common/usb_storage.c: Clean up usb_storage_probe()Tom Rini1-27/+2
We have the protocol and subclass variables which are used only in disabled debug code. This code dates back to the initial git import and seemingly dead code so remove it. This was detected by Coverity (CID 131117) Signed-off-by: Tom Rini <trini@konsulko.com>
2015-11-03arm: at91: reworked meesc board supportDaniel Gorsulowski2-26/+36
Signed-off-by: Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
2015-11-03mmc: atmel: Add atmel sdhci supportWenyou Yang3-0/+54
The SDHCI is introduced by sama5d2, named as Secure Digital Multimedia Card Controller(SDMMC). It supports the embedded MultiMedia Card (e.MMC) Specification V4.41, the SD Memory Card Specification V3.0, and the SDIO V3.0 specification. It is compliant with the SD Host Controller Standard V3.0 specification. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-11-03arm: at91: clock: Add the generated clock supportWenyou Yang3-0/+118
Some peripherals may need a second clock source that may be different from the system clock. This second clock is the generated clock (GCK) and is managed by the PMC via PMC_PCR. For simplicity, the clock source of the GCK is fixed to PLLA_CLK. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-11-03mmc: sdhci: Fix the SD clock stop sequenceWenyou Yang1-2/+18
According to the SDHC specification, stopping the SD Clock is by setting the SD Clock Enable bit in the Clock Control register at 0, instead of setting all bits at 0. Before stopping the SD clock, we need to make sure all SD transactions to complete, so add checking the CMD and DAT bits in the Presen State register, before stopping the SD clock. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
2015-11-03arm: at91: Change the Chip ID registers' addressesWenyou Yang4-7/+10
Provide the specific addresses for the Chip ID and Chip ID Extension registers, instead of the offset, which make it use on other chips. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-11-02mpc85xx/t2081: enable parsing DDR ratio for T2081 rev1.1Shengzhou Liu1-1/+2
T2081 rev 1.1 changes MEM_PLL_RAT in RCW which requires new parsing for PLL ratio. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-02T104xD4RDB: Fix PHY address for PHY connected to FM1@DTSEC3Codrin Ciubotariu1-1/+3
On T1040D4RDB board, u-boot fails to connect port FM1@DTSEC3 to the Ethernet PHY because the wrong PHY address is used. Also, T1040D4RDB supports SGMII on one port only. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-02mmc: fsl_esdhc: enable EVDD automatic control for SD/MMC Legacy Adapter CardYangbo Lu2-0/+6
When detecting SDHC Adapter Card Type 2(SD/MMC Legacy Adapter Card), enable EVDD automatic control via SDHC_VS. This could support SD card IO voltage switching for UHS-1 speed mode. Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-02powerpc/t1040qds: enable peripheral clock for eSDHCYangbo Lu1-0/+1
Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-02powerpc/t1040qds: enable adapter card type identification supportYangbo Lu1-0/+1
Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-02mmc: fsl_esdhc: enable dat[4:7] for eMMC4.5 Adapter CardYangbo Lu2-0/+5
If adapter card type identification is supported for platform, we would enable dat[4:7] for eMMC4.5 Adapter Card. Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-02Powerpc: eSDHC: expand a fix to T4160Shaohui Xie1-1/+2
commit b8e5b07225 "Powerpc: eSDHC: Fix mmc read write err in uboot of T4240QDS board", T4160 also needs this fix. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-02t1040d4rdb: assign muxed pins to qe-tdm when set hwconfig qe-tdmZhao Qiang4-0/+33
qe-tdm is muxed with diu, if hwconfig setted as qe-tdm, assign muxed pins to qe-tdm, then delete diu node from device tree. Signed-off-by: Zhao Qiang <qiang.zhao@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2015-11-02samsung: clean up checkpatch issuesMinkyu Kang1-4/+3
This patch will fix these checkpatch issues. CHECK: Alignment should match open parenthesis + printf("Enter: %s %s\n", mode_name[mode][0], + mode_info[mode]); CHECK: Alignment should match open parenthesis + lcd_printf("\n\n\t%s %s\n", mode_name[mode][0], + mode_info[mode]); CHECK: Alignment should match open parenthesis + lcd_printf("\t%s %s - %s\n\n", selection[i], + mode_name[i][0], Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02odroid: clean up checkpatch issuesMinkyu Kang1-8/+7
This patch will fix these checkpatch issues. +static const char *mmc_regulators[] = { CHECK: Blank lines aren't necessary before a close brace '}' + +} Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02smdk2410: clean up checkpatch issuesMinkyu Kang1-5/+5
This patch will fix these checkpatch issues. ERROR: spaces required around that '==' (ctx:VxV) +#if FCLK_SPEED==0 /* Fout = 203MHz, Fin = 12MHz for Audio */ ERROR: spaces required around that '==' (ctx:VxV) +#elif FCLK_SPEED==1 /* Fout = 202.8MHz */ ERROR: spaces required around that '==' (ctx:VxV) +#if USB_CLOCK==0 ERROR: spaces required around that '==' (ctx:VxV) +#elif USB_CLOCK==1 CHECK: spaces required around that ':' (ctx:VxV) + "bne 1b":"=r" (loops):"0" (loops)); Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02smdkv310: clean up checkpatch issuesMinkyu Kang1-4/+4
This patch will fix these checkpatch issues. WARNING: Avoid unnecessary line continuations + gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1, \ WARNING: Avoid unnecessary line continuations + gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2, \ WARNING: Avoid unnecessary line continuations + gd->bd->bi_dram[2].size = get_ram_size((long *)PHYS_SDRAM_3, \ WARNING: Avoid unnecessary line continuations + gd->bd->bi_dram[3].size = get_ram_size((long *)PHYS_SDRAM_4, \ Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02arm: exynos: clean up checkpatch issuesMinkyu Kang1-4/+4
This patch will fix these checkpatch issues. ERROR: Macros with complex values should be enclosed in parentheses +#define DEFAULT_DQS_X4 (DEFAULT_DQS << 24) || (DEFAULT_DQS << 16) \ + || (DEFAULT_DQS << 8) || (DEFAULT_DQS << 0) ERROR: space prohibited before that ',' (ctx:WxW) + writel(val , &drex0->concontrol); ^ ERROR: space prohibited before that ',' (ctx:WxW) + writel(val , &drex1->concontrol); ^ Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02s5p sdhci: call pinmux for card's gpio pins before use themPrzemyslaw Marczak1-7/+7
The SD card detection depends on checking one pin state. But the pin was configured after card was detected, which is wrong. This commit fixes this, by moving call to pinmux before use the pin. Tested-on: Odroid U3 and Odroid X2. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02Exynos4412: pinmux: disable pull for MMC pinsPrzemyslaw Marczak1-1/+1
There are 8 pins for SD card in Exynos, but the MUX was configured only for 7, since the one was used for card detection. This caused the pin's pull wrong configuration. This commit fixes this and the card detect can work properly, after call this function. Tested-on: Odroid U3 and Odroid X2. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02sandbox: add ADC unit testsPrzemyslaw Marczak3-0/+170
This commit adds unit tests for ADC uclass's methods using sandbox ADC. Testing proper ADC binding: - dm_test_adc_bind() - device binding - dm_test_adc_wrong_channel_selection() - checking wrong channel selection Testing ADC supply operations: - dm_test_adc_supply(): - Vdd/Vss values validating - Vdd regulator updated value validating - Vdd regulator's auto enable state validating Testing ADC operations results: - dm_test_adc_single_channel_conversion() - single channel start/data - dm_test_adc_single_channel_shot() - single channel shot - dm_test_adc_multi_channel_conversion() - multi channel start/data - dm_test_adc_multi_channel_shot() - multi channel single shot Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02sandbox: add ADC driverPrzemyslaw Marczak6-1/+193
This commit adds implementation of Sandbox ADC device emulation. The device provides: - single and multi-channel conversion - 4 channels with predefined conversion output data - 16-bit resolution Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02exynos5-dt-types: add board detection for Odroid XU3/XU3L/XU4.Przemyslaw Marczak6-1/+253
This commit adds additional file with implementation of board detection code for Odroid-XU3/XU4. The detection depends on compatible found in fdt: - "samsung,exynos5" - uses Exynos5 generic code - "samsung,odroidxu3" - try detect XU3 revision There are few revisions of Odroid XU3/XU4, each can be detected by checking the value of channel 9 of built-in ADC: Rev ADC Board 0.1 0 XU3 0.1 0.2 372 XU3 0.2 | XU3L - no DISPLAYPORT 0.3 1280 XU4 0.1 The detection code depends on the ADC+10% value. Implementation of functions: - set_board_type() - read ADC and set type - get_board_rev() - returns board revision: 1..3 - get_board_type() - returns board type string Additional functions with return values of bool: - board_is_generic() - true if found compatible "samsung,exynos5" but not "samsung,odroidxu3" - board_is_odroidxu3() - true if found compatible "samsung,odroidxu3" and one of XU3 revision. - board_is_odroidxu4() - true if found compatible "samsung,odroidxu3" and XU4 revision. After I2C controller init, the get_board_type() can check if the XU3 board is a "Lite" variant, by probing chip 0x40 on I2C0 (INA231 - exists only on non-lite). This is useful for setting fdt file name at misc_init_r(). Enabled configs: - CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - CONFIG_ODROID_REV_AIN - CONFIG_REVISION_TAG - CONFIG_BOARD_TYPES Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02Odroid-XU3: dts: enable ADC, with request for pre-reloc bindPrzemyslaw Marczak1-0/+5
This ADC is required for Odroid's board revision detection. The pre-reloc request is enabled, since board detection will be done in one of early function call. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02Exynos54xx: dts: add ADC nodePrzemyslaw Marczak1-0/+7
This commit adds common ADC node, which is disabled as default. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02Odroid-XU3: enable s2mps11 PMIC supportPrzemyslaw Marczak2-0/+10
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02dm: adc: add Exynos54xx compatible ADC driverPrzemyslaw Marczak4-0/+199
This commit adds driver for Exynos54xx ADC subsystem. The driver is implemented using driver model, amd provides ADC uclass's methods for ADC single channel operations: - adc_start_channel() - adc_channel_data() - adc_stop() The basic parameters of ADC conversion, are: - sample rate: 600KSPS - output the data as average of 8 time conversion ADC features: - sample rate: 600KSPS - resolution: 12-bit - channels: 10 (analog multiplexer) Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02dm: adc: add simple ADC uclass implementationPrzemyslaw Marczak8-0/+783
This commit adds: - new uclass id: UCLASS_ADC - new uclass driver: drivers/adc/adc-uclass.c The new uclass's API allows for ADC operation on: * single-channel with channel selection by a number * multti-channel with channel selection by bit mask ADC uclass's functions: * single-channel: - adc_start_channel() - start channel conversion - adc_channel_data() - get conversion data - adc_channel_single_shot() - start/get conversion data * multi-channel: - adc_start_channels() - start selected channels conversion - adc_channels_data() - get conversion data - adc_channels_single_shot() - start/get conversion data for channels selected by bit mask * general: - adc_stop() - stop the conversion - adc_vdd_value() - positive reference Voltage value with polarity [uV] - adc_vss_value() - negative reference Voltage value with polarity [uV] - adc_data_mask() - conversion data bit mask The device tree can provide below constraints/properties: - vdd-polarity-negative: if true: Vdd = vdd-microvolts * (-1) - vss-polarity-negative: if true: Vss = vss-microvolts * (-1) - vdd-supply: phandle to Vdd regulator's node - vss-supply: phandle to Vss regulator's node And optional, checked only if the above corresponding, doesn't exist: - vdd-microvolts: positive reference Voltage [uV] - vss-microvolts: negative reference Voltage [uV] Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02dm: regulator: add function device_get_supply_regulator()Przemyslaw Marczak2-0/+23
Some devices are supplied by configurable regulator's output. But there was no function for getting it. This commit adds function, that allows for getting the supply device by it's phandle. The returned regulator device can be used with regulator uclass's API. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02dm: pmic: add s2mps11 PMIC I/O driverPrzemyslaw Marczak5-0/+203
This driver allows I/O operations on the Samsung S2MPS11 PMIC, which provides lots of LDO/BUCK outputs. To enable it, update defconfig with: - CONFIG_PMIC_S2MPS11 and additional, if were not defined: - CONFIG_CMD_PMIC - CONFIG_ERRNO_STR The binding info: doc/device-tree-bindings/pmic/s2mps11.txt Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02Exynos5422/5800: set cpu id to 0x5422Przemyslaw Marczak7-18/+18
The proper CPU ID for those Exynos variants is 0x5422, but before the 0x5800 was set. This commit fix this back. Changes: - set cpu id to 0x5422 instead of 0x5800 - remove macro proid_is_exynos5800() - add macro proid_is_exynos5422() - change the calls to proid_is_exynos5800() with new macro Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02Peach-Pi: dts: add cpu-model stringPrzemyslaw Marczak1-0/+1
This platform is based on Exynos5800 but the cpu id is 0x5422. This doesn't fit the common Exynos SoC name convention, so now, the CPU name is defined by device tree string, to be printed properly. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02s5p: cpu_info: print "cpu-model" if exists in dtsPrzemyslaw Marczak2-1/+34
The CPU name for Exynos was concatenated with cpu id, but for new Exynos platforms, like Chromebook Peach Pi based on Exynos5800, the name of SoC variant does not include the real SoC cpu id (0x5422). For such case, the CPU name should be defined in device tree. This commit introduces new device-tree property for Exynos: - "cpu-model" - with cpu name string If defined, then the cpu id is not printed. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02samsung: board/misc: check returned pointer for get_board_type() callsPrzemyslaw Marczak2-2/+5
The function get_board_type() is called in two places by common code, but the returned pointer was never check. This commit adds checking the returned pointer, before use it. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-01ARM: at91: sama5: change the environment address to 0x6000Josh Wu1-2/+2
As sama5 board has 32k sram size, so the at91bootstrap and spl for sama5 boards is bigger than 16k (0x4000). That will overlap the U-Boot environment. So I move environment to 0x6000. And reduce its size as well. Following shows the size of the spl binaries (v2015.04 vs v2015.07): % ls v2015.04/*spi*spl.bin -l | awk '{print $5,$(NF)}' 15540 v2015.04/at91sam9n12ek_spiflash_defconfig_u-boot-spl.bin 15704 v2015.04/at91sam9x5ek_spiflash_defconfig_u-boot-spl.bin 16064 v2015.04/sama5d3xek_spiflash_defconfig_u-boot-spl.bin 16304 v2015.04/sama5d4ek_spiflash_defconfig_u-boot-spl.bin 16304 v2015.04/sama5d4_xplained_spiflash_defconfig_u-boot-spl.bin % ls v2015.07/*spi*spl.bin -l | awk '{print $5,$(NF)}' 16136 v2015.07/at91sam9n12ek_spiflash_defconfig_u-boot-spl.bin 16300 v2015.07/at91sam9x5ek_spiflash_defconfig_u-boot-spl.bin 16664 v2015.07/sama5d3xek_spiflash_defconfig_u-boot-spl.bin 16904 v2015.07/sama5d4ek_spiflash_defconfig_u-boot-spl.bin 16904 v2015.07/sama5d4_xplained_spiflash_defconfig_u-boot-spl.bin The gcc version is: gcc 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) Signed-off-by: Josh Wu <josh.wu@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> Acked-by: Bo Shen <voice.shen@gmail.com>
2015-11-01lcd: atmel: Add 32bpp support for HLCDCMarek Vasut1-0/+4
Add 32bpp framebuffer support for the Atmel HLCDC driver. This is needed for output bpp higher than 16bpp. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-11-01mmc: atmel: Zap global 'initialized' variableMarek Vasut1-4/+4
Global variables are bad. Get rid of this particular one, so we can correctly instantiate multiple atmel mci interfaces, without having them interfere with one another. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-11-01mmc: atmel: Implement proper private dataMarek Vasut1-15/+25
Instead of passing just the register area as a private data, introduce a proper struct atmel_mci_priv structure instead. This will become useful in the subsequent patch, where we eliminate the global variable from this driver. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> [fix free()] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-11-01mmc: atmel: Fix clock configurationMarek Vasut1-0/+2
After silencing the prints which were generated when reconfiguring the clock of the SD/MMC bus, surprisingly, the driver stopped working such that every attempt to use the SD/MMC bus caused the CPU to get totally stuck hard. It turns out that the prints generated a short delay, which was necessary for the CPU to reconfigure the clock without getting stuck. Thus, this patch adds a short delay after the clock configuration instead. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-11-01mmc: atmel: Silence debug outputMarek Vasut1-6/+6
This driver generates clearly debugging prints when changing clock speed, so silence those. Furthermore, the driver generates further prints in case a command fails to complete. The later case woud be useful, but for eMMC, command 8 can fail and it's not an error but a part of the specification. Thus, make this debug() as well. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> [fix checkpatch warnings] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-11-01at91: simplify spl board_init_f functionJosh Wu1-5/+0
crt0.S do both memset the bss section and call board_init_r for us, so remove them from board_init_f(). Signed-off-by: Josh Wu <josh.wu@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
2015-10-30x86: Select the ns16550 debug UART for minnowmax, chromebook_linkSimon Glass2-0/+2
At present the debug UART is not selected which causes a build error. Correct this. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-10-30Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini187-1091/+4390
generated by cgit v1.1 at 2024-07-14 00:46:00 +0000