aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-10-31test: Add tests for IOMMU uclassMark Kettenis10-0/+60
Add a set of tests for the IOMMU uclass. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31iommu: Add IOMMU uclassMark Kettenis9-0/+299
This uclass is intended to manage IOMMUs on systems where the IOMMUs are not in bypass mode by default. In that case U-Boot cannot ignore the IOMMUs if it wants to use devices that need to do DMA and sit behind such an IOMMU. This initial IOMMU uclass implementation does not implement and device ops and is intended for IOMMUs that have a bypass mode that does not require address translation. Support for IOMMUs that do require address translation is planned and device ops will be defined when support for such IOMMUs will be added. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-31arm: mvebu: Fix booting from SATAPali Rohár1-2/+2
Use proper SATA macro for boot_device switch in spl_boot_device() function. Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: 2226ca173486 ("arm: mvebu: Load U-Boot proper binary in SPL code based on kwbimage header")
2021-10-31Revert "arch: arm: use dt and UCLASS_SYSCON to get gic lpi details"Michael Walle5-64/+38
Stop using the device tree as a source for ad-hoc information. This reverts commit 2ae7adc659f7fca9ea65df4318e5bca2b8274310. Signed-off-by: Michael Walle <michael@walle.cc> [trini: Also make board/broadcom/bcmns3/ns3.c fail clearly now] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-30Revert "arm64: Layerscape: Survive LPI one-way reset workaround"Tom Rini5-41/+1
Ad-hoc bindings that are not part of the upstream device tree / bindings are not allowed in-tree. Only bindings that are in-progress with upstream and then re-synced once agreed upon are. This reverts commit af288cb291da3abef6be0875527729296f7de7a0. Cc: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Reported-by: Michael Walle <michael@walle.cc> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Marc Zyngier <maz@kernel.org>
2021-10-30cmd: usb_mass_storage: Use part_get_info_by_dev_and_name_or_numSean Anderson1-2/+2
This allows specifying partitions using more extended syntax. This is particularly useful to access eMMC hardware partitions. For example, this allows something like ums 0 mmc 0.0,0.1,0.2,0.3 to expose four LUNs for each of the four default eMMC hardware partitions. Note that the comma syntax was already present, and this syntax is already documented. Signed-off-by: Sean Anderson <sean.anderson@seco.com>
2021-10-30usb: xhci-brcm: Include header file needed for dev_errStefan Agner1-0/+1
dev_err seems to be moved to different header file. Include dm/device_compat.h file to compile properly. Fixes: 69dae8902b16 ("linux/compat.h: Remove redefinition of dev_xxx macros") Signed-off-by: Stefan Agner <stefan@agner.ch>
2021-10-30ARM: rmobile: Rename r8a774a1_beacon_defconfig to rzg2_beacon_defconfigAdam Ford2-3/+1
Now that the three M/N/H variants can be built from one config, rename the defconfig file to be more generic since it supports multiple RZ/G2. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-10-29ARM: rmobile: beacon: Enable reference clocks for USB and AVBAdam Ford1-0/+2
Both Ethernet and USB drivers get their reference clocks from the versaclock. Enable that driver and the common clock driver by default. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-10-29ARM: rmobile: Beacon: Remove dead codeAdam Ford2-10/+1
There are a few do-nothing functions that can be removed. Remove them. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-10-29ARM: rmobile: beacon: Remove duplicated for RZ/G2 M/N/HAdam Ford4-164/+2
Now that TARGET_BEACON_RZG2M can handle all the work that was done with TARGET_BEACON_RZG2N and TARGET_BEACON_RZG2H, remove them since they just create more duplicate code. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-10-29ARM: rmobile: beacon: Support RZ/G2 [M/N/H] on TARGET_BEACON_RZG2MAdam Ford2-0/+11
The three different boards share the same board file and only differ in terms of which SoC is being used. By enabling FIT on TARGET_BEACON_RZG2M, it can support all three boards and elimate duplicate code. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-10-29ARM: rmobile: Enable board detection when FIT is enabledAdam Ford1-0/+16
There are three boards from Beacon, RZ/G2 M/N/H which all use the same board file, but different device trees. Add code to automatically select the proper device tree based on the CPU type. Signed-off-by: Adam Ford <aford173@gmail.com>
2021-10-29Merge https://source.denx.de/u-boot/custodians/u-boot-mmcWIP/29Oct2021Tom Rini7-6/+89
- Fix mmc_switch timeout - Update mmc hwpartitiion command - Support wait_dat0 for Freescale eSDHC/sdhci drivers
2021-10-29mmc: arm_pl180_mmci: Enable HWFC for specific versions of MCIUsama Arif2-0/+15
There are 4 registers (PERIPHID{0-3}) that contain the ID of MCI. For MMCs' with peripheral id 0x02041180 and 0x03041180, H/W flow control needs to be enabled for multi block writes (MMC CMD 18). Signed-off-by: Usama Arif <usama.arif@arm.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-10-29mmc: Fix mmc_switch excessive timeoutKirill Kapranov1-2/+2
Fix branching to avoid premature falling back on a long timeout instead of continuation of the initialization attempt. Clear of the comment to avoid the ambiguity. Signed-off-by: Kirill Kapranov <kirill.kapranov@compulab.co.il> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Ye Li <ye.li@nxp.com> Reviewed-by: Marek Behún <marek.behun@nic.cz> Tested-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-10-29cmd: mmc: check whether card is SD or eMMC before hwpartitionJaehoon Chung1-0/+5
It doesn't need to follow more sequence to do the hwparititioning, because SD doesn't support hwpartitioning feature. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-10-29cmd: mmc: Support mmc hwpartition user enh start -Marek Vasut1-4/+29
Add option to extend the hardware partition to the maximum size by using the '-' dash sign instead of $cnt parameter. This is useful in case we want to switch the entire eMMC user area into pSLC mode, especially in case the device may be populated with different size eMMCs. With this change, we do not have to calculate the number of blocks of the user area manually. To switch the pSLC mode for user area, use e.g. the following. WARNING: This is a one-time irreversible change. => mmc hwpartition user enh 0 - wrrel on complete Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-10-29drivers: mmc: Add wait_dat0 support for sdhci driverStephen Carlson2-0/+22
Adds an implementation of the wait_dat0 MMC operation for the DM SDHCI driver, allowing the driver to continue when the card is ready rather than waiting for the worst case time on each MMC switch operation. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-10-29drivers: mmc: Add wait_dat0 support for Freescale eSDHC driverStephen Carlson1-0/+16
Adds an implementation of the wait_dat0 MMC operation for the Freescale eSHDC driver, allowing the driver to continue when the card is ready rather than waiting for the worst case time on each MMC switch operation. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2021-10-28Merge https://source.denx.de/u-boot/custodians/u-boot-marvellWIP/28Oct2021Tom Rini8-36/+76
- mvebu: Fix usage of BIN header arguments (Pali) - mvebu: turris_omnia: Fix MTD partitions order for Linux (Pali) - mvebu: nandpagesize support for kwbimage v1 (Pali)
2021-10-28arm: mvebu: Fix comments about kwbimage structuresPali Rohár2-2/+2
kwbimage v1 is used on more SoCs. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-28arm: mvebu: Update name of kwbimage v1 field at offset 0x2-0x3Pali Rohár2-2/+2
At this offset is stored nand page size. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-28tools: kwboot: Patch nandpagesize to zero also for v1 imagePali Rohár1-7/+6
kwbimage v1 has also nandpagesize field. So set it to zero for both image versions when image is not signed. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-28tools: kwbimage: Add support for NAND_PAGE_SIZE command also for v1 imagesPali Rohár2-1/+4
The NAND_PAGE_SIZE command is already supported by mkimage for v0 images, but not for v1 images. A38x and A39x BootROM supports reading NAND flash page size from v1 image in the same way as Kirkwood BootROM from v0 image. It it documented in A38x and A39x Functional Specification. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-28arm: mvebu: turris_omnia: Fix MTD partitions order for LinuxPali Rohár1-1/+1
Linux enumerates MTD partitions in DTB order, while the fdt_add_subnode() function puts a new subnode at the beginning. To fix this, put MTD partitions into DTB in reverse order. Fixes: 92f36c8e74c1 ("arm: mvebu: turris_omnia: fixup MTD partitions in Linux' DTB") Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-28arm: mvebu: Remove dummy BIN header arguments for SPL binaryPali Rohár1-1/+1
U-Boot SPL binary does not read BIN header arguments, so passing some dummy values 0000005b and 00000068 has no effect for U-Boot SPL code. Probably these two values comes from old Marvell DDR training code which was separated from U-Boot and used it for some configuration. Seems that two 32-bit values were specified here to ensure SPL code alignment to 128-bit boundary as it is required e.g. for A370 or AXP processors. Main kwbimage header is 64-byte long which is aligned to 128-bit boundary. Optional kwbheader is 32-bit long, number of BIN header arguments is stored in 32-bit number. So for alignment to 128-bit boundary is needed 64-bit padding which exactly these two 32-bit dummy arguments provided. Now when mkimage correctly aligns start of executable code in BIN header to 128-bit boundary, there is no requirement to put dummy argument values into kwbimage. So remove them. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-28arm: mvebu: Add documentation for save_boot_params() functionPali Rohár1-0/+9
Important detail is availability of kwbimage BIN header arguments passed via r0 and r1 registers by BootROM. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-28tools: kwbimage: Align BIN header executable code to 128-bit boundaryPali Rohár1-17/+34
ARM executable code inside the BIN header on some mvebu platforms (e.g. A370, AXP) must always be aligned with the 128-bit boundary. This requirement can be met by inserting dummy arguments into BIN header. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-28tools: kwboot: Align UART baudrate change code in BIN header to 128-bit boundaryPali Rohár1-5/+17
ARM executable code inside the BIN header on some mvebu platforms (e.g. A370, AXP) must always be aligned with the 128-bit boundary. This requirement can be met by inserting dummy arguments into BIN header. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-27sandbox: Remove OF_HOSTFILEWIP/27Oct2021Ilias Apalodimas31-69/+81
OF_HOSTFILE is used on sandbox configs only. Although it's pretty unique and not causing any confusions, we are better of having simpler config options for the DTB. So let's replace that with the existing OF_BOARD. U-Boot would then have only three config options for the DTB origin. - OF_SEPARATE, build separately from U-Boot - OF_BOARD, board specific way of providing the DTB - OF_EMBED embedded in the u-boot binary(should not be used in production Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-26Merge tag 'efi-2022-01-rc1-2' of ↵WIP/26Oct2021Tom Rini23-388/+715
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2022-01-rc1-2 doc: Remove obsolete PPC4XX references UEFI: Implement missing TCG2 measurements Code clean up # gpg: Signature made Tue 26 Oct 2021 05:56:47 PM EDT # gpg: using RSA key 6DC4F9C71F29A6FA06B76D33C481DBBC2C051AC4 # gpg: Good signature from "Heinrich Schuchardt <xypron.glpk@gmx.de>" [unknown] # gpg: aka "[jpeg image of size 1389]" [unknown] # Primary key fingerprint: 6DC4 F9C7 1F29 A6FA 06B7 6D33 C481 DBBC 2C05 1AC4
2021-10-26Merge branch '2021-10-26-add-nand-biterr-and-bugfixes'Tom Rini7-18/+144
- Add biterr sub-command to "nand" - scmi, rsa, uuid bugfixes, re-sort DFU menu in Kconfig and remove superfluous checks before free in env.
2021-10-26efi_loader: add DeployedMode and AuditMode variable measurementMasahisa Kojima1-8/+25
This commit adds the DeployedMode and AuditMode variable measurement required in TCG PC Client Platform Firmware Profile Specification. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
2021-10-26efi_loader: simplify tcg2_measure_secure_boot_variable()Masahisa Kojima1-42/+18
This commit simplifies tcg2_measure_secure_boot_variable() using secure_variables table. Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
2021-10-26efi_loader: add UEFI GPT measurementMasahisa Kojima6-3/+190
This commit adds the UEFI GPT disk partition topology measurement required in TCG PC Client Platform Firmware Profile Specification Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
2021-10-26env: superfluous check before free()WIP/2021-10-26-add-nand-biterr-and-bugfixesHeinrich Schuchardt1-4/+2
Free() checks if its argument in NULL. There is no need for the caller to do the same. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-10-26dfu: Sort Kconfig entries alphabeticallyMarek Vasut1-7/+7
The DFU_MTD Kconfig entry is in the wrong position, move it into the correct alphabetically sorted position. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Lukasz Majewski <lukma@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-10-26lib: uuid: fix the test on RNG device presencePatrick Delaunay1-1/+1
Correct the test on RNG device presence,when ret is equal to 0, before to call dm_rng_read function. Without this patch the RNG device is not used when present (when ret == 0) or a data abort occurs in dm_rng_read when CONFIG_DM_RNG is activated but the RNG device is not present in device tree (ret != 0 and devp = NULL). Fixes: 92fdad28cfdf ("lib: uuid: use RNG device if present") CC: Matthias Brugger <mbrugger@suse.com> CC: Torsten Duwe <duwe@suse.de> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-26common: Kconfig.boot: add config SPL_FIT_RSASSA_PSSPhilippe Reynes1-0/+7
The padding pss is only supported on u-boot and tools since commit 2bbed3ff8c7f ("image: Use Kconfig to enable FIT_RSASSA_PSS on host") This commit adds the config SPL_FIT_RSASSA_PSS to support the padding pss in the SPL. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-26lib: rsa: rsa-verify: also check that padding is not NULLPhilippe Reynes1-1/+1
This commit adds a check on the padding in the function rsa_verify_key to avoid using a NULL pointer. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-10-26firmware: scmi: fix struct layout for scmi_clk_rate_set_inClément Léger1-2/+2
First two fields are reversed compared to what is expected by the SCMI specification. Signed-off-by: Clément Léger <clement.leger@bootlin.com> Fixes: 60388844836 ("clk: add clock driver for SCMI agents")
2021-10-26cmd: nand biterr - Add support for nand biterr commandBalamanikandan Gunasundar1-3/+124
The command shall be used to induce bit errors in the nand page manually. The code flips a bit in the specified offset without changing the ECC. This helps to see how the software handles the error. The patch is ported from https://patchwork.ozlabs.org/project/uboot/patch/\ 1325691123-19565-1-git-send-email-holger.brunck@keymile.com The implementation is inspired from 'mtd-utils/nand-utils/nandflipbits.c' Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com>
2021-10-26efi_loader: add SMBIOS table measurementMasahisa Kojima8-14/+261
TCG PC Client Platform Firmware Profile Specification requires to measure the SMBIOS table that contains static configuration information (e.g. Platform Manufacturer Enterprise Number assigned by IANA, platform model number, Vendor and Device IDs for each SMBIOS table). The device- and environment-dependent information such as serial number is cleared to zero or space character for the measurement. Existing smbios_string() function returns pointer to the string with const qualifier, but exisintg use case is updating version string and const qualifier must be removed. This commit removes const qualifier from smbios_string() return value and reuses to clear the strings for the measurement. This commit also fixes the following compiler warning: lib/smbios-parser.c:59:39: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] const struct smbios_header *header = (struct smbios_header *)entry->struct_table_address; Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
2021-10-26Merge branch '2021-10-25-assorted-updates'Tom Rini7-14/+111
- Allow redundant environment on the eMMC HW boot partitions - Use LMB in "loads" - env, dfu + spi, OPTEE bugfixes
2021-10-25dfu: dfu_sf: Read the SPI flash in 16 MiB chunksMarek Vasut1-2/+12
Not all SPI flashes and controllers can do continuous transfer longer than 16 MiB, so perform the DFU read in 16 MiB chunks. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Lukasz Majewski <lukma@denx.de> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2021-10-25arm: spl: prepare for jumping to OPTEERicardo Salveti3-3/+30
Make sure to (if applicable) flush the D-cache, invalidate I-cache, and disable MMU and caches before jumping to OPTEE. This fixes the SDP->SPL->OPTEE boot flow on iMX6Q and most likely on some other ARM SoCs. Signed-off-by: Ricardo Salveti <ricardo@foundries.io> Co-developed-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io>
2021-10-25efi_loader: simplify tcg2_measure_secure_boot_variable()Heinrich Schuchardt1-16/+13
Don't duplicate GUIDs. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-10-25efi_loader: simplify efi_sigstore_parse_sigdb()Heinrich Schuchardt1-33/+5
Simplify efi_sigstore_parse_sigdb() by using existing functions. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-10-25efi_loader: function to get GUID for variable nameHeinrich Schuchardt2-0/+17
In multiple places we need the default GUID matching a variable name. The patch provides a library function. For secure boot related variables like 'PK', 'KEK', 'db' a lookup table is used. For all other variable names EFI_GLOBAL_VARIABLE is returned. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
generated by cgit v1.1 at 2024-07-12 07:22:25 +0000