diff options
Diffstat (limited to 'include')
400 files changed, 615 insertions, 3779 deletions
diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h index 16fd305..104282b 100644 --- a/include/asm-generic/global_data.h +++ b/include/asm-generic/global_data.h @@ -244,6 +244,10 @@ struct global_data { * @fdt_size: space reserved for relocated device space */ unsigned long fdt_size; + /** + * @fdt_src: Source of FDT + */ + enum fdt_source_t fdt_src; #if CONFIG_IS_ENABLED(OF_LIVE) /** * @of_root: root node of the live tree @@ -512,6 +516,14 @@ static_assert(sizeof(struct global_data) == GD_SIZE); #define gd_acpi_ctx() NULL #endif +#if CONFIG_IS_ENABLED(MULTI_DTB_FIT) +#define gd_multi_dtb_fit() gd->multi_dtb_fit +#define gd_set_multi_dtb_fit(_dtb) gd->multi_dtb_fit = _dtb +#else +#define gd_multi_dtb_fit() NULL +#define gd_set_multi_dtb_fit(_dtb) +#endif + /** * enum gd_flags - global data flags * diff --git a/include/clock_legacy.h b/include/clock_legacy.h index 29261b6..efa4831 100644 --- a/include/clock_legacy.h +++ b/include/clock_legacy.h @@ -22,4 +22,15 @@ unsigned long get_board_ddr_clk(void); #define get_board_ddr_clk() CONFIG_DDR_CLK_FREQ #endif +/* + * If we have CONFIG_DYNAMIC_SYS_CLK_FREQ then there will be an + * implentation of get_board_sys_clk() somewhere. Otherwise we have + * a static value to use now. + */ +#ifdef CONFIG_DYNAMIC_SYS_CLK_FREQ +unsigned long get_board_sys_clk(void); +#else +#define get_board_sys_clk() CONFIG_SYS_CLK_FREQ +#endif + #endif diff --git a/include/command.h b/include/command.h index 137cfbc..f8e07a5 100644 --- a/include/command.h +++ b/include/command.h @@ -45,7 +45,7 @@ struct cmd_tbl { char *const argv[]); char *usage; /* Usage message (short) */ #ifdef CONFIG_SYS_LONGHELP - char *help; /* Help message (long) */ + const char *help; /* Help message (long) */ #endif #ifdef CONFIG_AUTO_COMPLETE /* do auto completion on the arguments */ diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h index 3f724aa..2f90929 100644 --- a/include/config_distro_bootcmd.h +++ b/include/config_distro_bootcmd.h @@ -498,8 +498,4 @@ "run bootcmd_${target}; " \ "done\0" -#ifndef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND "run distro_bootcmd" -#endif - #endif /* _CONFIG_CMD_DISTRO_BOOTCMD_H */ diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h index 6a69ac4..5ed624c 100644 --- a/include/configs/M5208EVBE.h +++ b/include/configs/M5208EVBE.h @@ -15,7 +15,6 @@ */ #define CONFIG_SYS_UART_PORT (0) -#undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 #ifdef CONFIG_MCFFEC @@ -39,7 +38,6 @@ #define CONFIG_MCFTMR /* I2C */ -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR #define CONFIG_UDP_CHECKSUM diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index 7421f3b..90f1664 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -20,7 +20,6 @@ #define CONFIG_SYS_UART_PORT (0) -#undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ /* @@ -48,7 +47,6 @@ #define CONFIG_MCFTMR /* I2C */ -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR #define CONFIG_SYS_I2C_PINMUX_REG (gpio->par_qspi) #define CONFIG_SYS_I2C_PINMUX_CLR ~(GPIO_PAR_FECI2C_SCL_MASK | GPIO_PAR_FECI2C_SDA_MASK) #define CONFIG_SYS_I2C_PINMUX_SET (GPIO_PAR_FECI2C_SCL_I2CSCL | GPIO_PAR_FECI2C_SDA_I2CSDA) diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index 7ee0ec6..00892ec 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -21,8 +21,6 @@ #define CONFIG_SYS_UART_PORT (0) -#undef CONFIG_WATCHDOG - #undef CONFIG_MONITOR_IS_IN_RAM /* no pre-loader required!!! ;-) */ /* diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index e9a7922..c5d8aa3 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -12,8 +12,6 @@ #define CONFIG_SYS_UART_PORT (0) -#undef CONFIG_WATCHDOG /* disable watchdog */ - /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash @@ -69,7 +67,6 @@ #define CONFIG_HOSTNAME "M5253DEMO" /* I2C */ -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR #define CONFIG_SYS_I2C_PINMUX_REG (*(u32 *) (CONFIG_SYS_MBAR+0x19C)) #define CONFIG_SYS_I2C_PINMUX_CLR (0xFFFFE7FF) #define CONFIG_SYS_I2C_PINMUX_SET (0) diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index 1204aa0..e814a29 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -20,7 +20,6 @@ #define CONFIG_SYS_UART_PORT (0) -#undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 10000 /* timeout in milliseconds */ #undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ @@ -146,26 +145,6 @@ CF_CACR_EUSP) /*----------------------------------------------------------------------- - * Memory bank definitions - */ -#define CONFIG_SYS_BR0_PRELIM 0xFFE00201 -#define CONFIG_SYS_OR0_PRELIM 0xFFE00014 -#define CONFIG_SYS_BR1_PRELIM 0 -#define CONFIG_SYS_OR1_PRELIM 0 -#define CONFIG_SYS_BR2_PRELIM 0x30000001 -#define CONFIG_SYS_OR2_PRELIM 0xFFF80000 -#define CONFIG_SYS_BR3_PRELIM 0 -#define CONFIG_SYS_OR3_PRELIM 0 -#define CONFIG_SYS_BR4_PRELIM 0 -#define CONFIG_SYS_OR4_PRELIM 0 -#define CONFIG_SYS_BR5_PRELIM 0 -#define CONFIG_SYS_OR5_PRELIM 0 -#define CONFIG_SYS_BR6_PRELIM 0 -#define CONFIG_SYS_OR6_PRELIM 0 -#define CONFIG_SYS_BR7_PRELIM 0x00000701 -#define CONFIG_SYS_OR7_PRELIM 0xFFC0007C - -/*----------------------------------------------------------------------- * Port configuration */ #define CONFIG_SYS_PACNT 0x00000000 diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index 8e03fc9..b18f031 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -58,13 +58,10 @@ #endif /* I2C */ -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR #define CONFIG_SYS_I2C_PINMUX_REG (gpio_reg->par_feci2c) #define CONFIG_SYS_I2C_PINMUX_CLR (0xFFF0) #define CONFIG_SYS_I2C_PINMUX_SET (0x000F) -#define CONFIG_BOOTCOMMAND "bootm ffe40000" - #ifdef CONFIG_MCFFEC # define CONFIG_NET_RETRY_COUNT 5 # define CONFIG_OVERWRITE_ETHADDR_ONCE diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index 7b33677..5db189a 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -20,7 +20,6 @@ #define CONFIG_SYS_UART_PORT (0) -#undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 #define CONFIG_SYS_UNIFY_CACHE @@ -54,7 +53,6 @@ #define CONFIG_MCFTMR /* I2C */ -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR #define CONFIG_UDP_CHECKSUM diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 19d8cfe..f96f54e 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -20,7 +20,6 @@ #define CONFIG_SYS_UART_PORT (0) -#undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ #define CONFIG_SYS_UNIFY_CACHE @@ -48,7 +47,6 @@ #define CONFIG_MCFTMR /* I2C */ -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR #define CONFIG_UDP_CHECKSUM @@ -137,10 +135,6 @@ # define CONFIG_SYS_NAND_SIZE 1 # define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } # define NAND_ALLOW_ERASE_ALL 1 -# define CONFIG_JFFS2_NAND 1 -# define CONFIG_JFFS2_DEV "nand0" -# define CONFIG_JFFS2_PART_SIZE (CONFIG_SYS_CS2_MASK & ~1) -# define CONFIG_JFFS2_PART_OFFSET 0x00000000 #endif #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index e2ddc48..b790601 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -22,7 +22,6 @@ #define CONFIG_SYS_UART_PORT (0) -#undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 3360 /* timeout in ms, max is 3.36 sec */ #define CONFIG_SYS_UNIFY_CACHE @@ -50,7 +49,6 @@ #define CONFIG_MCFTMR /* I2C */ -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR #define CONFIG_UDP_CHECKSUM @@ -139,10 +137,6 @@ # define CONFIG_SYS_NAND_SIZE 1 # define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } # define NAND_ALLOW_ERASE_ALL 1 -# define CONFIG_JFFS2_NAND 1 -# define CONFIG_JFFS2_DEV "nand0" -# define CONFIG_JFFS2_PART_SIZE (CONFIG_SYS_CS2_MASK & ~1) -# define CONFIG_JFFS2_PART_OFFSET 0x00000000 #endif #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 72119a1..9a34e54 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -302,8 +302,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -#undef CONFIG_WATCHDOG /* watchdog disabled */ - #ifdef CONFIG_MMC #define CONFIG_FSL_ESDHC_PIN_MUX #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR @@ -326,7 +324,6 @@ */ #define CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_NETDEV "eth1" @@ -365,20 +362,4 @@ "$netdev:off " \ "root=$rootdev rw console=$console,$baudrate $othbootargs\0" -#define NFSBOOTCOMMAND \ - "setenv rootdev /dev/nfs;" \ - "run setbootargs;" \ - "run setipargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define RAMBOOTCOMMAND \ - "setenv rootdev /dev/ram;" \ - "run setbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - #endif /* __CONFIG_H */ diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index fe156e7..84e05ea 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -26,8 +26,6 @@ #define CONFIG_HAS_FEC 1 /* 8540 has FEC */ #endif -#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ - /* * sysclk for MPC85xx * @@ -46,10 +44,6 @@ * Note that PCI-X won't work at 33MHz. */ -#ifndef CONFIG_SYS_CLK_FREQ -#define CONFIG_SYS_CLK_FREQ 33000000 -#endif - /* * These can be toggled for performance analysis, otherwise use default. */ @@ -90,9 +84,7 @@ #define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ #define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH 16M */ -#define CONFIG_SYS_BR0_PRELIM 0xff001801 /* port size 32bit */ -#define CONFIG_SYS_OR0_PRELIM 0xff006ff7 /* 16MB Flash */ #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 64 /* sectors per device */ #undef CONFIG_SYS_FLASH_CHECKSUM @@ -131,8 +123,6 @@ * FIXME: the top 17 bits of BR2. */ -#define CONFIG_SYS_BR2_PRELIM 0xf0001861 - /* * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. * @@ -147,8 +137,6 @@ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 */ -#define CONFIG_SYS_OR2_PRELIM 0xfc006901 - #define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */ #define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ #define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ @@ -176,8 +164,6 @@ /* * 32KB, 8-bit wide for ADS config reg */ -#define CONFIG_SYS_BR4_PRELIM 0xf8000801 -#define CONFIG_SYS_OR4_PRELIM 0xffffe1f1 #define CONFIG_SYS_BCSR (CONFIG_SYS_BR4_PRELIM & 0xffff8000) #define CONFIG_SYS_INIT_RAM_LOCK 1 @@ -274,8 +260,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -#undef CONFIG_WATCHDOG /* watchdog disabled */ - /* * Miscellaneous configurable options */ @@ -317,23 +301,4 @@ "fdtaddr=400000\0" \ "fdtfile=your.fdt.dtb\0" -#define NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND NFSBOOTCOMMAND - #endif /* __CONFIG_H */ diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 5c54bad..f583aa8 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -19,15 +19,12 @@ #define CONFIG_PCI1 /* PCI controller 1 */ #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ #undef CONFIG_PCI2 -#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ #ifndef __ASSEMBLY__ #include <linux/stringify.h> -extern unsigned long get_clock_freq(void); #endif -#define CONFIG_SYS_CLK_FREQ get_clock_freq() /* sysclk for MPC85xx */ /* * These can be toggled for performance analysis, otherwise use default. @@ -134,14 +131,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE #endif -#define CONFIG_SYS_BR0_PRELIM \ - (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x800000) | BR_PS_16 | BR_V) -#define CONFIG_SYS_BR1_PRELIM \ - (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) - -#define CONFIG_SYS_OR0_PRELIM 0xff806e65 -#define CONFIG_SYS_OR1_PRELIM 0xff806e65 - #define CONFIG_SYS_FLASH_BANKS_LIST \ {CONFIG_SYS_FLASH_BASE_PHYS + 0x800000, CONFIG_SYS_FLASH_BASE_PHYS} #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ @@ -185,10 +174,6 @@ extern unsigned long get_clock_freq(void); * FIXME: the top 17 bits of BR2. */ -#define CONFIG_SYS_BR2_PRELIM \ - (BR_PHYS_ADDR(CONFIG_SYS_LBC_SDRAM_BASE_PHYS) \ - | BR_PS_32 | (3<<BR_MSEL_SHIFT) | BR_V) - /* * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. * @@ -203,8 +188,6 @@ extern unsigned long get_clock_freq(void); * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 */ -#define CONFIG_SYS_OR2_PRELIM 0xfc006901 - #define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */ #define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ #define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ @@ -263,9 +246,6 @@ extern unsigned long get_clock_freq(void); #else #define CADMUS_BASE_ADDR_PHYS CADMUS_BASE_ADDR #endif -#define CONFIG_SYS_BR3_PRELIM \ - (BR_PHYS_ADDR(CADMUS_BASE_ADDR_PHYS) | BR_PS_8 | BR_V) -#define CONFIG_SYS_OR3_PRELIM 0xfff00ff7 #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ @@ -401,8 +381,6 @@ extern unsigned long get_clock_freq(void); */ #define CONFIG_BOOTP_BOOTFILESIZE -#undef CONFIG_WATCHDOG /* watchdog disabled */ - /* * Miscellaneous configurable options */ @@ -457,23 +435,4 @@ extern unsigned long get_clock_freq(void); "fdtaddr=1e00000\0" \ "fdtfile=mpc8548cds.dtb\0" -#define NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND NFSBOOTCOMMAND - #endif /* __CONFIG_H */ diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index dcd538f..b8a72d0 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -27,7 +27,6 @@ * assume U-Boot is less than 0.5MB */ -#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ /* @@ -44,10 +43,6 @@ * in the README.mpc85xxads. */ -#ifndef CONFIG_SYS_CLK_FREQ -#define CONFIG_SYS_CLK_FREQ 33000000 -#endif - /* * These can be toggled for performance analysis, otherwise use default. */ @@ -90,9 +85,7 @@ #define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ #define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH 16M */ -#define CONFIG_SYS_BR0_PRELIM 0xff001801 /* port size 32bit */ -#define CONFIG_SYS_OR0_PRELIM 0xff006ff7 /* 16MB Flash */ #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 64 /* sectors per device */ #undef CONFIG_SYS_FLASH_CHECKSUM @@ -131,8 +124,6 @@ * FIXME: the top 17 bits of BR2. */ -#define CONFIG_SYS_BR2_PRELIM 0xf0001861 - /* * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. * @@ -147,8 +138,6 @@ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 */ -#define CONFIG_SYS_OR2_PRELIM 0xfc006901 - #define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */ #define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ #define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ @@ -176,8 +165,6 @@ /* * 32KB, 8-bit wide for ADS config reg */ -#define CONFIG_SYS_BR4_PRELIM 0xf8000801 -#define CONFIG_SYS_OR4_PRELIM 0xffffe1f1 #define CONFIG_SYS_BCSR (CONFIG_SYS_BR4_PRELIM & 0xffff8000) #define CONFIG_SYS_INIT_RAM_LOCK 1 @@ -261,8 +248,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -#undef CONFIG_WATCHDOG /* watchdog disabled */ - /* * Miscellaneous configurable options */ @@ -305,23 +290,4 @@ "fdtaddr=400000\0" \ "fdtfile=mpc8560ads.dtb\0" -#define NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND NFSBOOTCOMMAND - #endif /* __CONFIG_H */ diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index 1841eff..6a9c86c 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -63,19 +63,16 @@ #define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0 #else #ifdef CONFIG_TPL_BUILD #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_NAND_INIT #define CONFIG_SPL_COMMON_INIT_DDR #define CONFIG_SPL_MAX_SIZE (128 << 10) -#define CONFIG_TPL_TEXT_BASE 0xD0001000 #define CONFIG_SYS_MPC85XX_NO_RESETVEC #define CONFIG_SYS_NAND_U_BOOT_SIZE (576 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) -#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) #elif defined(CONFIG_SPL_BUILD) #define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_NAND_MINIMAL @@ -84,7 +81,6 @@ #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0xD0000000 #define CONFIG_SYS_NAND_U_BOOT_START 0xD0000000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) #endif #define CONFIG_SPL_PAD_TO 0x20000 #define CONFIG_TPL_PAD_TO 0x20000 @@ -102,7 +98,7 @@ #endif #ifdef CONFIG_TPL_BUILD -#define CONFIG_SYS_MONITOR_BASE CONFIG_TPL_TEXT_BASE +#define CONFIG_SYS_MONITOR_BASE 0xD0001000 #elif defined(CONFIG_SPL_BUILD) #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE #else @@ -110,12 +106,10 @@ #endif /* High Level Configuration Options */ -#define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ #if defined(CONFIG_PCI) #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ #define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ /* * PCI Windows @@ -152,8 +146,6 @@ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #endif -#define CONFIG_SYS_CLK_FREQ 66666666 /* SYSCLK for P1010 RDB */ - #define CONFIG_HWCONFIG /* * These can be toggled for performance analysis, otherwise use default. @@ -573,7 +565,6 @@ extern unsigned long get_sdram_size(void); #if defined(CONFIG_HAS_FSL_DR_USB) #ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_USB_EHCI_FSL #endif #endif @@ -597,8 +588,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_LOADS_ECHO /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ -#undef CONFIG_WATCHDOG /* watchdog disabled */ - #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI_HCD) \ || defined(CONFIG_FSL_SATA) #endif @@ -681,16 +670,6 @@ extern unsigned long get_sdram_size(void); "i2c mw 19 1 4; i2c mw 19 3 f3; reset\0" #endif -#define RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs; " \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND RAMBOOTCOMMAND - #include <asm/fsl_secure_boot.h> #endif /* __CONFIG_H */ diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index bf8a92c..8ada25d 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -36,7 +36,6 @@ #define CONFIG_PCIE1 /* PCIE controller 1 */ #define CONFIG_PCIE2 /* PCIE controller 2 */ #define CONFIG_PCIE3 /* PCIE controller 3 */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ #define CONFIG_SYS_SRIO #define CONFIG_SRIO1 /* SRIO port 1 */ @@ -50,10 +49,8 @@ #endif #ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(unsigned long dummy); #include <linux/stringify.h> #endif -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /* * These can be toggled for performance analysis, otherwise use default. @@ -137,9 +134,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CPLD_BASE_PHYS CPLD_BASE #endif -#define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(CPLD_BASE_PHYS) | BR_PS_8 | BR_V) -#define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ - #define PIXIS_LBMAP_SWITCH 7 #define PIXIS_LBMAP_MASK 0xf0 #define PIXIS_LBMAP_SHIFT 4 @@ -185,21 +179,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); | OR_FCM_SCY_1 \ | OR_FCM_TRLX \ | OR_FCM_EHTR) - -#ifdef CONFIG_MTD_RAW_NAND -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ -#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ -#else -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ -#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ -#endif -#else -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ #endif /* CONFIG_NAND_FSL_ELBC */ #define CONFIG_SYS_FLASH_EMPTY_INFO @@ -413,7 +392,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_HAS_FSL_MPH_USB #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif @@ -464,32 +442,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); "fdtfile=p2041rdb/p2041rdb.dtb\0" \ "bdev=sda3\0" -#define HDBOOT \ - "setenv bootargs root=/dev/$bdev rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND HDBOOT - #include <asm/fsl_secure_boot.h> #endif /* __CONFIG_H */ diff --git a/include/configs/SBx81LIFKW.h b/include/configs/SBx81LIFKW.h index bf9f26e..dbaffc6 100644 --- a/include/configs/SBx81LIFKW.h +++ b/include/configs/SBx81LIFKW.h @@ -6,25 +6,16 @@ #ifndef _CONFIG_SBX81LIFKW_H #define _CONFIG_SBX81LIFKW_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ -#define CONFIG_KW88F6281 1 /* SOC Name */ -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg - /* additions for new ARM relocation support */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ #define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 */ #define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ -#define CONFIG_KIRKWOOD_GPIO 1 /* * NS16550 Configuration */ -#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK @@ -61,7 +52,6 @@ * Ethernet Driver configuration */ #ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */ #define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */ #define CONFIG_PHY_BASE_ADR 0x01 #endif /* CONFIG_CMD_NET */ diff --git a/include/configs/SBx81LIFXCAT.h b/include/configs/SBx81LIFXCAT.h index 71394ae..bbd3ccc 100644 --- a/include/configs/SBx81LIFXCAT.h +++ b/include/configs/SBx81LIFXCAT.h @@ -6,25 +6,16 @@ #ifndef _CONFIG_SBX81LIFXCAT_H #define _CONFIG_SBX81LIFXCAT_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ -#define CONFIG_KW88F6281 1 /* SOC Name */ -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg - /* additions for new ARM relocation support */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ #define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 */ #define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ -#define CONFIG_KIRKWOOD_GPIO 1 /* * NS16550 Configuration */ -#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK @@ -66,7 +57,6 @@ * Ethernet Driver configuration */ #ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */ #define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */ #define CONFIG_PHY_BASE_ADR 0x01 #endif /* CONFIG_CMD_NET */ diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index 89bbeb7..bf26662 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -41,7 +41,6 @@ #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0x30000000 #define CONFIG_SYS_NAND_U_BOOT_START 0x30000000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) #endif #ifdef CONFIG_SPIFLASH @@ -116,12 +115,6 @@ #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc #endif -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - -#define CONFIG_SYS_CLK_FREQ 100000000 - /* * These can be toggled for performance analysis, otherwise use default. */ @@ -380,7 +373,6 @@ unsigned long get_board_sys_clk(void); #undef CONFIG_FSL_DIU_FB /* RDB doesn't support DIU */ #ifdef CONFIG_FSL_DIU_FB #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS /* @@ -416,7 +408,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_PCIE1 /* PCIE controller 1 */ #define CONFIG_PCIE2 /* PCIE controller 2 */ #define CONFIG_PCIE3 /* PCIE controller 3 */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ #ifdef CONFIG_PCI /* controller 1, direct to uli, tgtid 3, Base address 20000 */ @@ -452,7 +443,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_HAS_FSL_DR_USB #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif @@ -580,25 +570,6 @@ unsigned long get_board_sys_clk(void); "fdtaddr=1e00000\0" \ "bdev=sda3\0" -#define LINUXBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "setenv ramdiskaddr 0x02000000;" \ - "setenv fdtaddr 0x00c00000;" \ - "setenv loadaddr 0x1000000;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_BOOTCOMMAND LINUXBOOTCOMMAND - #include <asm/fsl_secure_boot.h> #endif /* __T1024RDB_H */ diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 48fc8a2..a1650f5 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -40,7 +40,6 @@ #endif #define CONFIG_SYS_NAND_U_BOOT_DST 0x30000000 #define CONFIG_SYS_NAND_U_BOOT_START 0x30000000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) #endif #ifdef CONFIG_SPIFLASH @@ -85,8 +84,6 @@ #define CONFIG_PCIE3 /* PCIE controller 3 */ #define CONFIG_PCIE4 /* PCIE controller 4 */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ - #if defined(CONFIG_SPIFLASH) #elif defined(CONFIG_MTD_RAW_NAND) #ifdef CONFIG_NXP_ESBC @@ -95,8 +92,6 @@ #endif #endif -#define CONFIG_SYS_CLK_FREQ 100000000 - /* * These can be toggled for performance analysis, otherwise use default. */ @@ -367,7 +362,6 @@ #ifdef CONFIG_FSL_DIU_FB #define CONFIG_FSL_DIU_CH7301 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #endif #endif @@ -460,7 +454,6 @@ #ifdef CONFIG_HAS_FSL_DR_USB #ifdef CONFIG_USB_EHCI_HCD -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif #endif @@ -499,8 +492,6 @@ #define CONFIG_SYS_DPAA_FMAN #define CONFIG_SYS_DPAA_PME -#define CONFIG_U_QE - #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) #endif /* CONFIG_NOBQFMAN */ @@ -609,40 +600,6 @@ "fdtfile=" __stringify(FDTFILE) "\0" \ "bdev=sda3\0" -#define LINUXBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "setenv ramdiskaddr 0x02000000;" \ - "setenv fdtaddr 0x00c00000;" \ - "setenv loadaddr 0x1000000;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define HDBOOT \ - "setenv bootargs root=/dev/$bdev rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND LINUXBOOTCOMMAND - #include <asm/fsl_secure_boot.h> #endif /* __CONFIG_H */ diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index 78562bc..aaea314 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -44,7 +44,6 @@ #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) #endif #ifdef CONFIG_SPIFLASH @@ -94,12 +93,6 @@ #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #endif -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() - /* * Config the L3 Cache as L3 SRAM */ @@ -360,12 +353,6 @@ unsigned long get_board_sys_clk(void); #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 -#define CONFIG_VID_FLS_ENV "t208xqds_vdd_mv" -#ifndef CONFIG_SPL_BUILD -#define CONFIG_VID -#endif -#define CONFIG_VOL_MONITOR_IR36021_SET -#define CONFIG_VOL_MONITOR_IR36021_READ /* The lowest and highest voltage allowed for T208xQDS */ #define VDD_MV_MIN 819 #define VDD_MV_MAX 1212 @@ -420,7 +407,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_PCIE2 /* PCIE controller 2 */ #define CONFIG_PCIE3 /* PCIE controller 3 */ #define CONFIG_PCIE4 /* PCIE controller 4 */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ /* controller 1, direct to uli, tgtid 3, Base address 20000 */ #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull @@ -517,7 +503,6 @@ unsigned long get_board_sys_clk(void); * USB */ #ifdef CONFIG_USB_EHCI_HCD -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_HAS_FSL_DR_USB #endif @@ -614,40 +599,6 @@ unsigned long get_board_sys_clk(void); "cpu 7 release 0x01000000 - - -;" \ "go 0x01000000" -#define LINUXBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "setenv ramdiskaddr 0x02000000;" \ - "setenv fdtaddr 0x00c00000;" \ - "setenv loadaddr 0x1000000;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define HDBOOT \ - "setenv bootargs root=/dev/$bdev rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND LINUXBOOTCOMMAND - #include <asm/fsl_secure_boot.h> #endif /* __T208xQDS_H */ diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index 471ed94..467f634 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -39,7 +39,6 @@ #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) #endif #ifdef CONFIG_SPIFLASH @@ -89,12 +88,6 @@ #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #endif -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - -#define CONFIG_SYS_CLK_FREQ 66660000 - /* * Config the L3 Cache as L3 SRAM */ @@ -312,12 +305,6 @@ unsigned long get_board_sys_clk(void); #define I2C_MUX_CH_VOL_MONITOR 0xa -#define CONFIG_VID_FLS_ENV "t208xrdb_vdd_mv" -#ifndef CONFIG_SPL_BUILD -#define CONFIG_VID -#endif -#define CONFIG_VOL_MONITOR_IR36021_SET -#define CONFIG_VOL_MONITOR_IR36021_READ /* The lowest and highest voltage allowed for T208xRDB */ #define VDD_MV_MIN 819 #define VDD_MV_MAX 1212 @@ -372,7 +359,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_PCIE2 /* PCIE controller 2 */ #define CONFIG_PCIE3 /* PCIE controller 3 */ #define CONFIG_PCIE4 /* PCIE controller 4 */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ /* controller 1, direct to uli, tgtid 3, Base address 20000 */ #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull @@ -472,7 +458,6 @@ unsigned long get_board_sys_clk(void); * USB */ #ifdef CONFIG_USB_EHCI_HCD -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_HAS_FSL_DR_USB #endif @@ -567,40 +552,6 @@ unsigned long get_board_sys_clk(void); "cpu 7 release 0x01000000 - - -;" \ "go 0x01000000" -#define LINUXBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "setenv ramdiskaddr 0x02000000;" \ - "setenv fdtaddr 0x00c00000;" \ - "setenv loadaddr 0x1000000;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define HDBOOT \ - "setenv bootargs root=/dev/$bdev rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND LINUXBOOTCOMMAND - #include <asm/fsl_secure_boot.h> #endif /* __T2080RDB_H */ diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index f6ccaf4..2d63249 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -60,7 +60,6 @@ #define CONFIG_PCIE1 /* PCIE controller 1 */ #define CONFIG_PCIE2 /* PCIE controller 2 */ #define CONFIG_PCIE3 /* PCIE controller 3 */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ /* * These can be toggled for performance analysis, otherwise use default. @@ -225,12 +224,6 @@ "setenv bootargs config-addr=0x60000000; " \ "bootm 0x01000000 - 0x00f00000" -#define CONFIG_SYS_CLK_FREQ 66666666 - -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - /* * DDR Setup */ @@ -408,12 +401,6 @@ unsigned long get_board_sys_clk(void); #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 -#define CONFIG_VID_FLS_ENV "t4240rdb_vdd_mv" -#ifndef CONFIG_SPL_BUILD -#define CONFIG_VID -#endif -#define CONFIG_VOL_MONITOR_IR36021_SET -#define CONFIG_VOL_MONITOR_IR36021_READ /* The lowest and highest voltage allowed for T4240RDB */ #define VDD_MV_MIN 819 #define VDD_MV_MAX 1212 @@ -498,7 +485,6 @@ unsigned long get_board_sys_clk(void); /* * USB */ -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_HAS_FSL_DR_USB @@ -547,40 +533,6 @@ unsigned long get_board_sys_clk(void); "setenv bootargs config-addr=0x60000000; " \ "bootm 0x01000000 - 0x00f00000" -#define LINUXBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "setenv ramdiskaddr 0x02000000;" \ - "setenv fdtaddr 0x00c00000;" \ - "setenv loadaddr 0x1000000;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define HDBOOT \ - "setenv bootargs root=/dev/$bdev rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND LINUXBOOTCOMMAND - #include <asm/fsl_secure_boot.h> #endif /* __CONFIG_H */ diff --git a/include/configs/adp-ae3xx.h b/include/configs/adp-ae3xx.h index 973033d..58e8526 100644 --- a/include/configs/adp-ae3xx.h +++ b/include/configs/adp-ae3xx.h @@ -17,8 +17,6 @@ #define CONFIG_SKIP_TRUNOFF_WATCHDOG -#define CONFIG_ARCH_MAP_SYSMEM - #define CONFIG_BOOTP_SERVERIP #ifdef CONFIG_SKIP_LOWLEVEL_INIT @@ -30,8 +28,7 @@ /* * Timer */ -#define CONFIG_SYS_CLK_FREQ 39062500 -#define VERSION_CLOCK CONFIG_SYS_CLK_FREQ +#define VERSION_CLOCK get_board_sys_clk() /* * Use Externel CLOCK or PCLK diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h index f533ada..1022764 100644 --- a/include/configs/adp-ag101p.h +++ b/include/configs/adp-ag101p.h @@ -15,8 +15,6 @@ */ #define CONFIG_USE_INTERRUPT -#define CONFIG_ARCH_MAP_SYSMEM - #define CONFIG_BOOTP_SERVERIP #ifndef CONFIG_SKIP_LOWLEVEL_INIT @@ -32,8 +30,7 @@ /* * Timer */ -#define CONFIG_SYS_CLK_FREQ 39062500 -#define VERSION_CLOCK CONFIG_SYS_CLK_FREQ +#define VERSION_CLOCK get_board_sys_clk() /* * Use Externel CLOCK or PCLK diff --git a/include/configs/alt.h b/include/configs/alt.h index 8456a6b..37b5800 100644 --- a/include/configs/alt.h +++ b/include/configs/alt.h @@ -34,8 +34,6 @@ #define CONFIG_BITBANGMII_MULTI /* Board Clock */ -#define RMOBILE_XTAL_CLK 20000000u -#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" \ diff --git a/include/configs/am335x_igep003x.h b/include/configs/am335x_igep003x.h index 339a975..2cf77a6 100644 --- a/include/configs/am335x_igep003x.h +++ b/include/configs/am335x_igep003x.h @@ -91,12 +91,6 @@ "echo WARNING: Could not determine device tree to use; fi; \0" #endif -#define CONFIG_BOOTCOMMAND \ - "run findfdt;" \ - "run mmcboot;" \ - "run nandboot;" \ - "run netboot;" - /* NS16550 Configuration */ #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */ diff --git a/include/configs/am335x_shc.h b/include/configs/am335x_shc.h index 584b025..c7a7a18 100644 --- a/include/configs/am335x_shc.h +++ b/include/configs/am335x_shc.h @@ -139,64 +139,15 @@ #if defined CONFIG_SHC_NETBOOT /* Network Boot */ -# define CONFIG_BOOTCOMMAND \ - "run fusecmd; " \ - "if run netboot; then " \ - "echo Booting from network; " \ - "else " \ - "echo ERROR: Cannot boot from network!; " \ - "panic; " \ - "fi; " #elif defined CONFIG_SHC_SDBOOT /* !defined CONFIG_SHC_NETBOOT */ /* SD-Card Boot */ -# define CONFIG_BOOTCOMMAND \ - "if mmc dev 0; mmc rescan; then " \ - "run sd_setup; " \ - "else " \ - "echo ERROR: SD/MMC-Card not detected!; " \ - "panic; " \ - "fi; " \ - "if run loaduimage; then " \ - "echo Bootable SD/MMC-Card inserted, booting from it!; " \ - "run mmcboot; " \ - "else " \ - "echo ERROR: Unable to load uImage from SD/MMC-Card!; " \ - "panic; " \ - "fi; " #elif defined CONFIG_SHC_ICT /* ICT adapter boots only u-boot and does HW partitioning */ -# define CONFIG_BOOTCOMMAND \ - "if mmc dev 0; mmc rescan; then " \ - "run sd_setup; " \ - "else " \ - "echo ERROR: SD/MMC-Card not detected!; " \ - "panic; " \ - "fi; " \ - "run fusecmd; " #else /* !defined CONFIG_SHC_NETBOOT, !defined CONFIG_SHC_SDBOOT */ /* Regular Boot from internal eMMC */ -# define CONFIG_BOOTCOMMAND \ - "if mmc dev 1; mmc rescan; then " \ - "run emmc_setup; " \ - "else " \ - "echo ERROR: eMMC device not detected!; " \ - "panic; " \ - "fi; " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else " \ - "echo ERROR Unable to load uImage from eMMC!; " \ - "echo Performing Rollback!; " \ - "setenv _active_ ${active_root}; " \ - "setenv _inactive_ ${inactive_root}; " \ - "setenv active_root ${_inactive_}; " \ - "setenv inactive_root ${_active_}; " \ - "saveenv; " \ - "reset; " \ - "fi; " #endif /* Regular Boot */ diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index bf01a77..f5f2b63 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -90,25 +90,6 @@ "nand read ${fdtaddr} aa0000 80000; " \ "bootm ${loadaddr} - ${fdtaddr}\0" \ -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "echo SD/MMC found on device $mmcdev; " \ - "if run loadbootenv; then " \ - "run importbootenv; " \ - "fi; " \ - "echo Checking if uenvcmd is set ...; " \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...; " \ - "run uenvcmd; " \ - "fi; " \ - "echo Running default loadimage ...; " \ - "setenv bootfile zImage; " \ - "if run loadimage; then " \ - "run loadfdt; " \ - "run mmcboot; " \ - "fi; " \ - "else run nandboot; fi" - /* Miscellaneous configurable options */ /* We set the max number of command args high to avoid HUSH bugs. */ diff --git a/include/configs/amcore.h b/include/configs/amcore.h index fd05ea6..d813af1 100644 --- a/include/configs/amcore.h +++ b/include/configs/amcore.h @@ -13,7 +13,6 @@ #define CONFIG_MCFTMR #define CONFIG_SYS_UART_PORT 0 -#define CONFIG_BOOTCOMMAND "bootm ffc20000" #define CONFIG_EXTRA_ENV_SETTINGS \ "upgrade_uboot=loady; " \ "protect off 0xffc00000 0xffc1ffff; " \ diff --git a/include/configs/ap121.h b/include/configs/ap121.h index e23a7dc..70cd2ee 100644 --- a/include/configs/ap121.h +++ b/include/configs/ap121.h @@ -20,10 +20,6 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE - 1) -#define CONFIG_BOOTCOMMAND "sf probe;" \ - "mtdparts default;" \ - "bootm 0x9f650000" - /* Miscellaneous configurable options */ /* diff --git a/include/configs/ap143.h b/include/configs/ap143.h index 80b64da..167cc47 100644 --- a/include/configs/ap143.h +++ b/include/configs/ap143.h @@ -25,10 +25,6 @@ */ #define CONFIG_SYS_NS16550_CLK 25000000 -#define CONFIG_BOOTCOMMAND "sf probe;" \ - "mtdparts default;" \ - "bootm 0x9f680000" - /* Miscellaneous configurable options */ /* diff --git a/include/configs/ap152.h b/include/configs/ap152.h index 762cc67..5bfca42 100644 --- a/include/configs/ap152.h +++ b/include/configs/ap152.h @@ -25,12 +25,6 @@ */ #define CONFIG_SYS_NS16550_CLK 25000000 -#define CONFIG_BOOTCOMMAND "sf probe;" \ - "mtdparts default;" \ - "bootm 0x9f060000" - -#define CONFIG_ENV_SPI_MAX_HZ 25000000 - /* Miscellaneous configurable options */ /* diff --git a/include/configs/apalis-imx8.h b/include/configs/apalis-imx8.h index 27007c5..c2b0d6f 100644 --- a/include/configs/apalis-imx8.h +++ b/include/configs/apalis-imx8.h @@ -50,7 +50,7 @@ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=PARTUUID=${uuid} rootwait " \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "netargs=setenv bootargs console=${console},${baudrate} " \ "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \ "\0" \ @@ -68,8 +68,6 @@ #define CONFIG_SYS_INIT_SP_ADDR 0x80200000 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - /* On Apalis iMX8 USDHC1 is eMMC, USDHC2 is 8-bit and USDHC3 is 4-bit MMC/SD */ #define CONFIG_SYS_FSL_USDHC_NUM 3 diff --git a/include/configs/apalis-imx8x.h b/include/configs/apalis-imx8x.h index 50dae2d..402fed1 100644 --- a/include/configs/apalis-imx8x.h +++ b/include/configs/apalis-imx8x.h @@ -77,7 +77,7 @@ "mmcargs=setenv bootargs ${consoleargs} " \ "root=PARTUUID=${uuid} rootwait " \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "netargs=setenv bootargs ${consoleargs} " \ "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp " \ "${vidargs}\0" \ @@ -99,8 +99,6 @@ /* Environment in eMMC, before config block at the end of 1st "boot sector" */ -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - /* On Apalis iMX8X USDHC1 is eMMC, USDHC2 is 4-bit SD */ #define CONFIG_SYS_FSL_USDHC_NUM 2 diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h index dfed161..c165f61 100644 --- a/include/configs/apalis_imx6.h +++ b/include/configs/apalis_imx6.h @@ -45,8 +45,6 @@ #define CONFIG_USBD_HS /* Framebuffer and LCD */ -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP diff --git a/include/configs/apple.h b/include/configs/apple.h index b1f6043..3e5fb49 100644 --- a/include/configs/apple.h +++ b/include/configs/apple.h @@ -3,10 +3,6 @@ #include <linux/sizes.h> -#define CONFIG_SYS_SDRAM_BASE 0x880000000 - -#define CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE CONFIG_SYS_TEXT_BASE - /* Environment */ #define ENV_DEVICE_SETTINGS \ "stdin=serial,usbkbd\0" \ diff --git a/include/configs/aristainetos2.h b/include/configs/aristainetos2.h index b73b0d5..e639737 100644 --- a/include/configs/aristainetos2.h +++ b/include/configs/aristainetos2.h @@ -443,7 +443,6 @@ /* Framebuffer */ /* check this console not needed, after test remove it */ #define CONFIG_IMX_VIDEO_SKIP -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX6_PWM_PER_CLK 66000000 diff --git a/include/configs/armadillo-800eva.h b/include/configs/armadillo-800eva.h index 73f63c5..7714da4 100644 --- a/include/configs/armadillo-800eva.h +++ b/include/configs/armadillo-800eva.h @@ -17,7 +17,7 @@ #define CONFIG_TMU_TIMER #define CONFIG_SYS_TIMER_COUNTS_DOWN #define CONFIG_SYS_TIMER_COUNTER (TMU_BASE + 0xc) /* TCNT0 */ -#define CONFIG_SYS_TIMER_RATE (CONFIG_SYS_CLK_FREQ / 4) +#define CONFIG_SYS_TIMER_RATE (get_board_sys_clk() / 4) /* STACK */ #define CONFIG_SYS_INIT_SP_ADDR 0xE8083000 @@ -72,7 +72,6 @@ #define CONFIG_BITBANGMII_MULTI /* Board Clock */ -#define CONFIG_SYS_CLK_FREQ 50000000 -#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ get_board_sys_clk() #endif /* __ARMADILLO_800EVA_H */ diff --git a/include/configs/aspeed-common.h b/include/configs/aspeed-common.h index 5177bf2..96526e1 100644 --- a/include/configs/aspeed-common.h +++ b/include/configs/aspeed-common.h @@ -38,13 +38,4 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -/* - * Miscellaneous configurable options - */ - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "verify=yes\0" \ - "spi_dma=yes\0" \ - "" - #endif /* __AST_COMMON_CONFIG_H */ diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index 36e351f..d87ca30 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -58,7 +58,6 @@ #define CONFIG_MCFTMR /* I2C */ -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR /* * Defines processor clock - important for correct timings concerning serial @@ -91,7 +90,6 @@ */ #ifndef CONFIG_MONITOR_IS_IN_RAM -#define CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 3355 /* timeout in milliseconds */ #endif @@ -140,18 +138,6 @@ * by external update.c; This is not included in mainline because * it needs non-blocking CFI routines. */ -#ifdef CONFIG_MONITOR_IS_IN_RAM -#define CONFIG_BOOTCOMMAND "" /* no autoboot in this case */ -#else -#if ASTRO_V532 -#define CONFIG_BOOTCOMMAND "protect off 0x80000 0x1ffffff;run env_check;"\ - "run xilinxload&&run alteraload&&bootm 0x80000;"\ - "update;reset" -#else -#define CONFIG_BOOTCOMMAND "protect off 0x80000 0x1ffffff;run env_check;"\ - "run xilinxload&&bootm 0x80000;update;reset" -#endif -#endif #define CONFIG_FPGA_COUNT 1 #define CONFIG_SYS_FPGA_PROG_FEEDBACK diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h index 9a73e3a..b93c67b 100644 --- a/include/configs/at91-sama5_common.h +++ b/include/configs/at91-sama5_common.h @@ -21,31 +21,12 @@ #define CONFIG_BOOTP_BOOTFILESIZE #ifdef CONFIG_SD_BOOT -#define CONFIG_BOOTCOMMAND "if test ! -n ${dtb_name}; then " \ - "setenv dtb_name at91-${board_name}.dtb; " \ - "fi; " \ - "fatload mmc 0:1 0x21000000 ${dtb_name}; " \ - "fatload mmc 0:1 0x22000000 zImage; " \ - "bootz 0x22000000 - 0x21000000" - #else #ifdef CONFIG_NAND_BOOT /* u-boot env in nand flash */ -#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \ - "nand read 0x22000000 0x200000 0x600000;" \ - "bootz 0x22000000 - 0x21000000" #elif CONFIG_SPI_BOOT /* u-boot env in serial flash, by default is bus 0 and cs 0 */ -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x21000000 0x60000 0xc000; " \ - "sf read 0x22000000 0x6c000 0x394000; " \ - "bootz 0x22000000 - 0x21000000" -#elif CONFIG_QSPI_BOOT -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x21000000 0x180000 0x80000; " \ - "sf read 0x22000000 0x200000 0x600000; " \ - "bootz 0x22000000 - 0x21000000" #endif #endif diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index d09a5db..c9344e8 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -87,27 +87,13 @@ #ifdef CONFIG_SYS_USE_DATAFLASH_CS0 /* bootstrap + u-boot + env + linux in dataflash on CS0 */ -#define CONFIG_BOOTCOMMAND "sf probe 0:0; " \ - "sf read 0x22000000 0x84000 0x294000; " \ - "bootm 0x22000000" - -#elif CONFIG_SYS_USE_DATAFLASH_CS1 - -#define CONFIG_BOOTCOMMAND "sf probe 0:1; " \ - "sf read 0x22000000 0x84000 0x294000; " \ - "bootm 0x22000000" - #elif defined(CONFIG_SYS_USE_NANDFLASH) /* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" #else /* CONFIG_SYS_USE_MMC */ /* bootstrap + u-boot + env + linux in mmc */ /* For FAT system, most cases it should be in the reserved sector */ - -#define CONFIG_BOOTCOMMAND \ - "fatload mmc 0:1 0x22000000 uImage; bootm" #endif #endif diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index fb4695c..7fce98f 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -90,21 +90,14 @@ #ifdef CONFIG_SYS_USE_DATAFLASH_CS0 /* bootstrap + u-boot + env + linux in dataflash on CS0 */ -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x22000000 0x84000 0x294000; " \ - "bootm 0x22000000" #elif CONFIG_SYS_USE_DATAFLASH_CS3 /* bootstrap + u-boot + env + linux in dataflash on CS3 */ -#define CONFIG_BOOTCOMMAND "sf probe 0:3; " \ - "sf read 0x22000000 0x84000 0x294000; " \ - "bootm 0x22000000" #else /* CONFIG_SYS_USE_NANDFLASH */ /* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" #endif #endif diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index e7fca46..5aa9fee 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -207,14 +207,10 @@ #ifdef CONFIG_SYS_USE_DATAFLASH /* bootstrap + u-boot + env + linux in dataflash on CS0 */ -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x22000000 0x84000 0x294000; " \ - "bootm 0x22000000" #elif CONFIG_SYS_USE_NANDFLASH /* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" #endif #endif diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 500c9ae..973e889 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -64,16 +64,8 @@ #ifdef CONFIG_NAND_BOOT /* bootstrap + u-boot + env in nandflash */ - -#define CONFIG_BOOTCOMMAND \ - "nand read 0x70000000 0x200000 0x300000;" \ - "bootm 0x70000000" #elif CONFIG_SD_BOOT /* bootstrap + u-boot + env + linux in mmc */ - -#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x71000000 dtb; " \ - "fatload mmc 0:1 0x72000000 zImage; " \ - "bootz 0x72000000 - 0x71000000" #endif /* Defines for SPL */ diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index 43f9852..f102dbe 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -71,28 +71,10 @@ #ifdef CONFIG_SPI_BOOT /* bootstrap + u-boot + env + linux in dataflash on CS0 */ -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs ${console} ${mtdparts} ${bootargs_nand};" \ - "sf probe 0; sf read 0x22000000 0x100000 0x300000; " \ - "bootm 0x22000000" #elif defined(CONFIG_NAND_BOOT) /* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs ${console} ${mtdparts} ${bootargs_nand};" \ - "nand read 0x21000000 0x180000 0x080000;" \ - "nand read 0x22000000 0x200000 0x400000;" \ - "bootm 0x22000000 - 0x21000000" - -#else /* CONFIG_SD_BOOT */ - -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs ${console} ${mtdparts} ${bootargs_mmc};" \ - "fatload mmc 0:1 0x21000000 dtb;" \ - "fatload mmc 0:1 0x22000000 uImage;" \ - "bootm 0x22000000 - 0x21000000" - #endif /* SPL */ diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index c703276..5bc47d6 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -59,22 +59,13 @@ #ifdef CONFIG_SYS_USE_DATAFLASH /* bootstrap + u-boot + env + linux in dataflash on CS0 */ -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x22000000 0x84000 0x294000; " \ - "bootm 0x22000000" #elif CONFIG_SYS_USE_NANDFLASH /* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x600000; " \ - "nand read 0x21000000 0x180000 0x80000; " \ - "bootz 0x22000000 - 0x21000000" #else /* CONFIG_SYS_USE_MMC */ /* bootstrap + u-boot + env + linux in mmc */ -#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 at91sam9rlek.dtb; " \ - "fatload mmc 0:1 0x22000000 zImage; " \ - "bootz 0x22000000 - 0x21000000" #endif #endif diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index f15711b..e6d5b99 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -62,20 +62,10 @@ #ifdef CONFIG_NAND_BOOT /* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_BOOTCOMMAND "nand read " \ - "0x22000000 0x200000 0x600000; " \ - "nand read 0x21000000 0x180000 0x20000; " \ - "bootz 0x22000000 - 0x21000000" #elif defined(CONFIG_SPI_BOOT) /* bootstrap + u-boot + env + linux in spi flash */ -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x22000000 0x100000 0x300000; " \ - "bootm 0x22000000" #elif defined(CONFIG_SYS_USE_DATAFLASH) /* bootstrap + u-boot + env + linux in data flash */ -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x22000000 0x84000 0x294000; " \ - "bootm 0x22000000" #endif /* SPL */ diff --git a/include/configs/baltos.h b/include/configs/baltos.h index 32f2174..f4ab664 100644 --- a/include/configs/baltos.h +++ b/include/configs/baltos.h @@ -185,15 +185,6 @@ /*DFUARGS*/ #endif -#define CONFIG_BOOTCOMMAND \ - "run findfdt; " \ - "run usbboot;" \ - "run mmcboot;" \ - "setenv mmcdev 1; " \ - "setenv bootpart 1:2; " \ - "run mmcboot;" \ - "run nandboot;" - /* NS16550 Configuration */ #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ #define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ diff --git a/include/configs/bcm_ns3.h b/include/configs/bcm_ns3.h index a57edf5..81b4218 100644 --- a/include/configs/bcm_ns3.h +++ b/include/configs/bcm_ns3.h @@ -44,7 +44,6 @@ /* Access eMMC Boot_1 and Boot_2 partitions */ /* enable 64-bit PCI resources */ -#define CONFIG_SYS_PCI_64BIT 1 #define CONSOLE_ARGS "console_args=console=ttyS0,115200n8\0" #define MAX_CPUS "max_cpus=maxcpus=8\0" @@ -277,12 +276,6 @@ "setenv bl_flash_pending_rfs_imgs;" \ "fi; \0" -#define CONFIG_BOOTCOMMAND "run flash_pending_rfs_imgs;" \ - "run fastboot_nitro && "\ - "run bootcmd_mmc_fits || "\ - "run bootcmd_usb || "\ - "run bootcmd_pxe" - /* Flashing commands */ #define TFTP_QSPI_PARAM \ "fip_qspi_addr=0x0\0"\ diff --git a/include/configs/bcmstb.h b/include/configs/bcmstb.h index e7f380b..98c8159 100644 --- a/include/configs/bcmstb.h +++ b/include/configs/bcmstb.h @@ -90,7 +90,6 @@ extern phys_addr_t prior_stage_fdt_address; /* * CONFIG_SYS_LOAD_ADDR - 1 MiB. */ -#define CONFIG_SYS_FDT_SAVE_ADDRESS 0x1f00000 #define CONFIG_SYS_CBSIZE 512 #define CONFIG_SYS_MAXARGS 32 @@ -104,7 +103,6 @@ extern phys_addr_t prior_stage_fdt_address; */ #define V_NS16550_CLK 81000000 -#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK @@ -126,8 +124,6 @@ extern phys_addr_t prior_stage_fdt_address; /* * Flash configuration. */ -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_SPI_FLASH_MACRONIX /* * Filesystem configuration. diff --git a/include/configs/beacon-rzg2m.h b/include/configs/beacon-rzg2m.h index 14d6df3..7eaafb0 100644 --- a/include/configs/beacon-rzg2m.h +++ b/include/configs/beacon-rzg2m.h @@ -67,18 +67,4 @@ "booti; " \ "fi;\0" -#undef CONFIG_BOOTCOMMAND - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else booti ${loadaddr} - ${fdt_addr}; fi" - #endif /* __BEACON_RZG2M_H */ diff --git a/include/configs/bk4r1.h b/include/configs/bk4r1.h index c377094..e0508b0 100644 --- a/include/configs/bk4r1.h +++ b/include/configs/bk4r1.h @@ -32,10 +32,6 @@ "preboot=" BK4_NET_INIT \ "if ${ncenable}; then run if_netconsole start_netconsole; fi\0" -/* BK4r1 boot command sets GPIO103/PTC30 to force USB hub out of reset*/ -#define BK4_BOOTCOMMAND "run set_gpio122; run set_gpio96; sf probe; " \ - "run manage_userdata; " - /* Enable PREBOOT variable */ /* Set ARP_TIMEOUT to 500ms */ @@ -76,7 +72,6 @@ #define CONFIG_BOARD_SIZE_LIMIT 520192 /* boot command, including the target-defined one if any */ -#define CONFIG_BOOTCOMMAND BK4_BOOTCOMMAND "run bootcmd_nand" /* Extra env settings (including the target-defined ones if any) */ #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/blanche.h b/include/configs/blanche.h index f048f15..882b94f 100644 --- a/include/configs/blanche.h +++ b/include/configs/blanche.h @@ -45,8 +45,6 @@ #endif /* Board Clock */ -#define RMOBILE_XTAL_CLK 20000000u -#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK /* ENV setting */ diff --git a/include/configs/broadcom_bcm963158.h b/include/configs/broadcom_bcm963158.h index de45f74..5aa784d 100644 --- a/include/configs/broadcom_bcm963158.h +++ b/include/configs/broadcom_bcm963158.h @@ -28,7 +28,6 @@ #ifdef CONFIG_MTD_RAW_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_SELF_INIT #endif /* CONFIG_MTD_RAW_NAND */ /* diff --git a/include/configs/broadcom_bcm968360bg.h b/include/configs/broadcom_bcm968360bg.h index 0391f06..01bab04 100644 --- a/include/configs/broadcom_bcm968360bg.h +++ b/include/configs/broadcom_bcm968360bg.h @@ -27,7 +27,6 @@ #ifdef CONFIG_MTD_RAW_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_SELF_INIT #endif /* CONFIG_MTD_RAW_NAND */ /* diff --git a/include/configs/broadcom_bcm968380gerg.h b/include/configs/broadcom_bcm968380gerg.h index 866de25..c1c1b37 100644 --- a/include/configs/broadcom_bcm968380gerg.h +++ b/include/configs/broadcom_bcm968380gerg.h @@ -8,5 +8,4 @@ #ifdef CONFIG_MTD_RAW_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_SELF_INIT #endif /* CONFIG_MTD_RAW_NAND */ diff --git a/include/configs/broadcom_bcm968580xref.h b/include/configs/broadcom_bcm968580xref.h index 179aa9d..ebfc2ec 100644 --- a/include/configs/broadcom_bcm968580xref.h +++ b/include/configs/broadcom_bcm968580xref.h @@ -27,7 +27,6 @@ #ifdef CONFIG_MTD_RAW_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_SELF_INIT #endif /* CONFIG_MTD_RAW_NAND */ /* diff --git a/include/configs/brxre1.h b/include/configs/brxre1.h index d917976..d34d697 100644 --- a/include/configs/brxre1.h +++ b/include/configs/brxre1.h @@ -53,8 +53,6 @@ BUR_COMMON_ENV \ " do run b_${target}; if test ${b_break} = 1; then; exit; fi; done\0" #endif /* !CONFIG_SPL_BUILD*/ -#define CONFIG_BOOTCOMMAND "mmc dev 1; run b_default" - /* Environment */ #endif /* __CONFIG_BRXRE1_H__ */ diff --git a/include/configs/capricorn-common.h b/include/configs/capricorn-common.h index 58ab1b7..1cde5f7 100644 --- a/include/configs/capricorn-common.h +++ b/include/configs/capricorn-common.h @@ -11,15 +11,12 @@ #include <asm/arch/imx-regs.h> #include "siemens-env-common.h" -#include "siemens-ccp-common.h" /* SPL config */ #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800 #define CONFIG_SPL_STACK 0x013E000 #define CONFIG_SPL_BSS_START_ADDR 0x00128000 @@ -35,9 +32,6 @@ #define CONFIG_FACTORYSET -#undef CONFIG_IDENT_STRING -#define CONFIG_IDENT_STRING GENERATE_CCP_VERSION("01", "07") - #define CONFIG_REMAKE_ELF /* ENET Config */ @@ -117,20 +111,11 @@ ENV_EMMC \ ENV_NET -#define CONFIG_BOOTCOMMAND \ - "if usrbutton; then " \ - "run flash_self_test; " \ - "reset; " \ - "fi;" \ - "run flash_self;" \ - "reset;" - /* Default location for tftp and bootm */ #define CONFIG_SYS_INIT_SP_ADDR 0x80200000 /* On CCP board, USDHC1 is for eMMC */ #define CONFIG_MMCROOT "/dev/mmcblk0p2" /* eMMC */ -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 #define CONFIG_SYS_SDRAM_BASE 0x80000000 #define PHYS_SDRAM_1 0x80000000 diff --git a/include/configs/cgtqmx8.h b/include/configs/cgtqmx8.h index 4523595..d5549f6 100644 --- a/include/configs/cgtqmx8.h +++ b/include/configs/cgtqmx8.h @@ -14,8 +14,6 @@ #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800 #define CONFIG_SPL_STACK 0x013E000 #define CONFIG_SPL_BSS_START_ADDR 0x00128000 @@ -33,7 +31,6 @@ #define CONFIG_REMAKE_ELF /* Flat Device Tree Definitions */ -#define CONFIG_OF_BOARD_SETUP #define CONFIG_SYS_BOOTMAPSZ (256 << 20) #define CONFIG_SYS_FSL_ESDHC_ADDR 0 @@ -82,7 +79,7 @@ "boot_fdt=try\0" \ "fdt_file=imx8qm-cgt-qmx8.dtb\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot} earlycon\0 " \ @@ -123,24 +120,10 @@ "booti; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else booti ${loadaddr} - ${fdt_addr}; fi" - /* Link Definitions */ #define CONFIG_SYS_INIT_SP_ADDR 0x80200000 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */ #define CONFIG_SYS_FSL_USDHC_NUM 3 diff --git a/include/configs/chiliboard.h b/include/configs/chiliboard.h index 49a8d71..afddedd 100644 --- a/include/configs/chiliboard.h +++ b/include/configs/chiliboard.h @@ -31,11 +31,6 @@ "nand read ${loadaddr} NAND.kernel; " \ "bootz ${loadaddr} - ${fdt_addr}\0" -#define CONFIG_BOOTCOMMAND \ - "run mmcboot; " \ - "run nandboot; " \ - "run netboot" - #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ "fdt_addr=0x87800000\0" \ diff --git a/include/configs/chromebook_coral.h b/include/configs/chromebook_coral.h index 4d44b3b..0eeea80 100644 --- a/include/configs/chromebook_coral.h +++ b/include/configs/chromebook_coral.h @@ -10,19 +10,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_BOOTCOMMAND \ - "tpm init; tpm startup TPM2_SU_CLEAR; " \ - "read mmc 0:2 100000 0 80; setexpr loader *001004f0; " \ - "setexpr size *00100518; setexpr blocks $size / 200; " \ - "read mmc 0:2 100000 80 $blocks; setexpr setup $loader - 1000; " \ - "setexpr cmdline_ptr $loader - 2000; " \ - "setexpr.s cmdline *$cmdline_ptr; " \ - "setexpr cmdline gsub %U \\\\${uuid}; " \ - "if part uuid mmc 0:2 uuid; then " \ - "zboot start 100000 0 0 0 $setup cmdline; " \ - "zboot load; zboot setup; zboot dump; zboot go;" \ - "fi" - #include <configs/x86-common.h> #include <configs/x86-chromebook.h> @@ -31,8 +18,6 @@ "stdout=vidconsole,serial\0" \ "stderr=vidconsole,serial\0" -#define CONFIG_TPL_TEXT_BASE 0xffff8000 - #define CONFIG_SYS_NS16550_MEM32 #undef CONFIG_SYS_NS16550_PORT_MAPPED diff --git a/include/configs/chromebook_samus.h b/include/configs/chromebook_samus.h index 2fe3e72..9d5a63c 100644 --- a/include/configs/chromebook_samus.h +++ b/include/configs/chromebook_samus.h @@ -23,6 +23,4 @@ "stdout=vidconsole,serial\0" \ "stderr=vidconsole,serial\0" -#define CONFIG_TPL_TEXT_BASE 0xfffd8000 - #endif /* __CONFIG_H */ diff --git a/include/configs/ci20.h b/include/configs/ci20.h index 0a7043a..17954fe 100644 --- a/include/configs/ci20.h +++ b/include/configs/ci20.h @@ -35,7 +35,6 @@ #define CONFIG_SYS_MAXARGS 32 /* Max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot argument buffer size */ -#define CONFIG_VERSION_VARIABLE /* U-BOOT version */ /* Miscellaneous configuration options */ #define CONFIG_SYS_BOOTM_LEN (64 << 20) @@ -50,6 +49,4 @@ #define CONFIG_SPL_START_S_PATH "arch/mips/mach-jz47xx" -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x1c /* 14 KiB offset */ - #endif /* __CONFIG_CI20_H__ */ diff --git a/include/configs/cl-som-imx7.h b/include/configs/cl-som-imx7.h index fdc8429..a5bf6cc 100644 --- a/include/configs/cl-som-imx7.h +++ b/include/configs/cl-som-imx7.h @@ -30,7 +30,6 @@ #undef CONFIG_SYS_AUTOLOAD #undef CONFIG_EXTRA_ENV_SETTINGS -#undef CONFIG_BOOTCOMMAND #define CONFIG_SYS_AUTOLOAD "no" @@ -50,7 +49,7 @@ "fdtaddr=0x83000000\0" \ "mmcdev_def="__stringify(CONFIG_SYS_MMC_DEV)"\0" \ "usbdev_def="__stringify(CONFIG_SYS_USB_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "usbpart=" __stringify(CONFIG_SYS_USB_IMG_LOAD_PART) "\0" \ "doboot=bootz ${loadaddr} - ${fdtaddr}\0" \ "mmc_config=mmc dev ${mmcdev}; mmc rescan\0" \ @@ -86,11 +85,6 @@ "emmcbootscript=setenv mmcdev 1; setenv mmcblk 2; run mmcbootscript\0" \ "emmcboot=setenv mmcdev 1; setenv mmcblk 2; run mmcboot\0" \ -#define CONFIG_BOOTCOMMAND \ - "echo SD boot attempt ...; run sdbootscript; run sdboot; " \ - "echo eMMC boot attempt ...; run emmcbootscript; run emmcboot; " \ - "echo USB boot attempt ...; run usbbootscript; " - /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index d61d759..40bc821 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -13,7 +13,6 @@ #include "mx6_common.h" /* Machine config */ -#define CONFIG_SYS_LITTLE_ENDIAN /* MMC */ #define CONFIG_SYS_FSL_USDHC_NUM 3 @@ -177,7 +176,6 @@ /* Display */ #define CONFIG_IMX_HDMI -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO /* EEPROM */ diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h index 4b6e391..7e187a4 100644 --- a/include/configs/cm_t335.h +++ b/include/configs/cm_t335.h @@ -55,18 +55,6 @@ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ MMCARGS \ NANDARGS - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else run nandboot; " \ - "fi; " \ - "fi; " \ - "else run nandboot; fi" #endif /* CONFIG_SPL_BUILD */ #define CONFIG_TIMESTAMP diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h index e250dc9..2d09a6f 100644 --- a/include/configs/cm_t43.h +++ b/include/configs/cm_t43.h @@ -78,18 +78,6 @@ "load mmc 1 ${fdtaddr} ${fdtfile} && " \ "bootz ${loadaddr} - ${fdtaddr}\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev 0; " \ - "if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "fi; " \ - "fi; " \ - "mmc dev 1; " \ - "if mmc rescan; then " \ - "run emmcboot; " \ - "fi;" - /* SPL defines. */ #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + (128 << 20)) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index dbb47cc..3e19e99 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -54,7 +54,6 @@ */ #if 0 -#define CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 10000 /* timeout in milliseconds */ #endif @@ -124,7 +123,6 @@ u-boot: 'set' command */ #if 0 -#define CONFIG_BOOTCOMMAND "bootm 0xffe80000" /*Autoboto command, please enter a valid image address in flash */ /* User network settings */ @@ -247,36 +245,6 @@ enter a valid image address in flash */ CF_CACR_EUSP) /*----------------------------------------------------------------------- - * Memory bank definitions - * - * Please refer also to Motorola Coldfire user manual - Chapter XXX - * <http://e-www.motorola.com/files/dsp/doc/ref_manual/MCF5272UM.pdf> - */ -#define CONFIG_SYS_BR0_PRELIM 0xFFE00201 -#define CONFIG_SYS_OR0_PRELIM 0xFFE00014 - -#define CONFIG_SYS_BR1_PRELIM 0 -#define CONFIG_SYS_OR1_PRELIM 0 - -#define CONFIG_SYS_BR2_PRELIM 0 -#define CONFIG_SYS_OR2_PRELIM 0 - -#define CONFIG_SYS_BR3_PRELIM 0 -#define CONFIG_SYS_OR3_PRELIM 0 - -#define CONFIG_SYS_BR4_PRELIM 0 -#define CONFIG_SYS_OR4_PRELIM 0 - -#define CONFIG_SYS_BR5_PRELIM 0 -#define CONFIG_SYS_OR5_PRELIM 0 - -#define CONFIG_SYS_BR6_PRELIM 0 -#define CONFIG_SYS_OR6_PRELIM 0 - -#define CONFIG_SYS_BR7_PRELIM 0x00000701 -#define CONFIG_SYS_OR7_PRELIM 0xFF00007C - -/*----------------------------------------------------------------------- * LED config */ #define LED_STAT_0 0xffff /*all LEDs off*/ diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h index 6b3e1c6..787fe33 100644 --- a/include/configs/colibri-imx6ull.h +++ b/include/configs/colibri-imx6ull.h @@ -72,7 +72,6 @@ #if defined(CONFIG_TARGET_COLIBRI_IMX6ULL_NAND) /* Run Distro Boot script if ubiboot fails */ -#define CONFIG_BOOTCOMMAND "run ubiboot || run distro_bootcmd;" #define DFU_ALT_NAND_INFO "imx6ull-bcb part 0,1;u-boot1 part 0,2;u-boot2 part 0,3;u-boot-env part 0,4;ubi partubi 0,5" #define MODULE_EXTRA_ENV_SETTINGS \ "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \ @@ -165,7 +164,6 @@ #if defined(CONFIG_DM_VIDEO) #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #endif diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h index 82926af..0118250 100644 --- a/include/configs/colibri-imx8x.h +++ b/include/configs/colibri-imx8x.h @@ -80,7 +80,7 @@ "mmcargs=setenv bootargs ${consoleargs} " \ "root=PARTUUID=${uuid} rootwait " \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "netargs=setenv bootargs ${consoleargs} " \ "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp " \ "${vidargs}\0" \ @@ -102,8 +102,6 @@ /* Environment in eMMC, before config block at the end of 1st "boot sector" */ -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - /* On Colibri iMX8X USDHC1 is eMMC, USDHC2 is 4-bit SD */ #define CONFIG_SYS_FSL_USDHC_NUM 2 diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h index b103186..c8e733b 100644 --- a/include/configs/colibri_imx6.h +++ b/include/configs/colibri_imx6.h @@ -35,8 +35,6 @@ #define CONFIG_USBD_HS /* Framebuffer and LCD */ -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h index ac188ee..faf27ba 100644 --- a/include/configs/colibri_imx7.h +++ b/include/configs/colibri_imx7.h @@ -110,8 +110,6 @@ "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ #if defined(CONFIG_TARGET_COLIBRI_IMX7_NAND) -#define CONFIG_BOOTCOMMAND "run ubiboot ; echo ; echo ubiboot failed ; " \ - "run distro_bootcmd;" #define MODULE_EXTRA_ENV_SETTINGS \ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ UBI_BOOTCMD @@ -199,7 +197,6 @@ #define CONFIG_USBD_HS #if defined(CONFIG_DM_VIDEO) -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #endif diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index 0878676..0be7f5a 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -12,21 +12,12 @@ /* * High Level Board Configuration Options */ -#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */ /* Avoid overwriting factory configuration block */ #define CONFIG_BOARD_SIZE_LIMIT 0x40000 /* * Environment settings */ -#define CONFIG_BOOTCOMMAND \ - "if fatload mmc 0 0xa0000000 uImage; then " \ - "bootm 0xa0000000; " \ - "fi; " \ - "if usb reset && fatload usb 0 0xa0000000 uImage; then " \ - "bootm 0xa0000000; " \ - "fi; " \ - "bootm 0xc0000;" #define CONFIG_TIMESTAMP /* diff --git a/include/configs/colibri_t20.h b/include/configs/colibri_t20.h index e947b58..c377187 100644 --- a/include/configs/colibri_t20.h +++ b/include/configs/colibri_t20.h @@ -19,7 +19,6 @@ #define CONFIG_LCD_LOGO /* NAND support */ -#define CONFIG_TEGRA_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define UBOOT_UPDATE \ diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index 71fe768..62f8518 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -14,10 +14,7 @@ #include <asm/arch/imx-regs.h> #include <linux/sizes.h> -#define CONFIG_SYS_FSL_CLK - #ifdef CONFIG_VIDEO_FSL_DCU_FB -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_SYS_FSL_DCU_LE @@ -69,8 +66,6 @@ "ubi read ${fdt_addr_r} dtb && " \ "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ -#define CONFIG_BOOTCOMMAND "run ubiboot || run distro_bootcmd;" - #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(USB, usb, 0) \ diff --git a/include/configs/comtrend_vr3032u.h b/include/configs/comtrend_vr3032u.h index fc890af..ee29f70 100644 --- a/include/configs/comtrend_vr3032u.h +++ b/include/configs/comtrend_vr3032u.h @@ -10,5 +10,4 @@ #ifdef CONFIG_MTD_RAW_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_SELF_INIT #endif /* CONFIG_MTD_RAW_NAND */ diff --git a/include/configs/condor.h b/include/configs/condor.h index 36466f0..822ef71 100644 --- a/include/configs/condor.h +++ b/include/configs/condor.h @@ -27,7 +27,6 @@ /* Board Clock */ /* XTAL_CLK : 33.33MHz */ -#define CONFIG_SYS_CLK_FREQ 33333333u /* Generic Timer Definitions (use in assembler source) */ #define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */ diff --git a/include/configs/conga-qeval20-qa3-e3845.h b/include/configs/conga-qeval20-qa3-e3845.h index 01b67f7..6e819ad 100644 --- a/include/configs/conga-qeval20-qa3-e3845.h +++ b/include/configs/conga-qeval20-qa3-e3845.h @@ -21,12 +21,6 @@ #define VIDEO_IO_OFFSET 0 #define CONFIG_X86EMU_RAW_IO -#undef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND \ - "load scsi 0:2 03000000 /boot/vmlinuz-${kernel-ver}-generic;" \ - "load scsi 0:2 04000000 /boot/initrd.img-${kernel-ver}-generic;" \ - "run boot" - #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ "kernel-ver=4.4.0-22\0" \ diff --git a/include/configs/controlcenterdc.h b/include/configs/controlcenterdc.h index 5120c7b..ff385d9 100644 --- a/include/configs/controlcenterdc.h +++ b/include/configs/controlcenterdc.h @@ -122,26 +122,6 @@ " gpio clear ${gpio1}; gpio set ${gpio2};" \ " fi; sleep 0.12; done\0" -#define NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off " \ - "console=${consoledev},${baudrate} ${othbootargs}; " \ - "tftpboot ${bootfile_addr} ${bootfile}; " \ - "bootm ${bootfile_addr}" - -#define MMCBOOTCOMMAND \ - "setenv bootargs root=/dev/mmcblk0p3 rw rootwait " \ - "console=${consoledev},${baudrate} ${othbootargs}; " \ - "ext2load mmc 0:2 ${bootfile_addr} ${bootfile}; " \ - "bootm ${bootfile_addr}" - -#define CONFIG_BOOTCOMMAND \ - "if env exists keyprogram; then;" \ - " setenv keyprogram; run nfsboot;" \ - " fi;" \ - " run dobootfail" - /* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index 1cf5c03..d6d679f 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -10,6 +10,9 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define SPLASH_SETTINGS "splashsource=virtio_fs\0" \ + "splashimage=0x1000000\0" + #include <configs/x86-common.h> #define CONFIG_SYS_MONITOR_LEN (1 << 20) diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 1e55d52..f6e0b2a 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -47,15 +47,12 @@ #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS #define CONFIG_PCIE1 /* PCIE controller 1 */ #define CONFIG_PCIE2 /* PCIE controller 2 */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ #if defined(CONFIG_SPIFLASH) #elif defined(CONFIG_SDCARD) #define CONFIG_FSL_FIXED_MMC_LOCATION #endif -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ - /* * These can be toggled for performance analysis, otherwise use default. */ @@ -128,10 +125,6 @@ #define CONFIG_SYS_FLASH_OR_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \ | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR) -#define CONFIG_SYS_BR1_PRELIM \ - (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) -#define CONFIG_SYS_OR1_PRELIM 0xf8000ff7 - #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ #ifdef CONFIG_PHYS_64BIT #define PIXIS_BASE_PHYS 0xfffdf0000ull @@ -139,9 +132,6 @@ #define PIXIS_BASE_PHYS PIXIS_BASE #endif -#define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) -#define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ - #define PIXIS_LBMAP_SWITCH 7 #define PIXIS_LBMAP_MASK 0xf0 #define PIXIS_LBMAP_SHIFT 4 @@ -187,21 +177,6 @@ | OR_FCM_SCY_1 \ | OR_FCM_TRLX \ | OR_FCM_EHTR) - -#ifdef CONFIG_MTD_RAW_NAND -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ -#define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ -#else -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ -#define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ -#endif -#else -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ #endif /* CONFIG_NAND_FSL_ELBC */ #define CONFIG_SYS_FLASH_EMPTY_INFO @@ -414,7 +389,6 @@ #define CONFIG_HAS_FSL_MPH_USB #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif @@ -469,32 +443,6 @@ "fdtfile=p4080ds/p4080ds.dtb\0" \ "bdev=sda3\0" -#define HDBOOT \ - "setenv bootargs root=/dev/$bdev rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND HDBOOT - #include <asm/fsl_secure_boot.h> #endif /* __CONFIG_H */ diff --git a/include/configs/corvus.h b/include/configs/corvus.h index 882cb48..27284f7 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -66,7 +66,6 @@ #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8 -#define CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT #endif /* Ethernet */ @@ -79,10 +78,6 @@ /* bootstrap + u-boot + env in nandflash */ -#define CONFIG_BOOTCOMMAND \ - "nand read 0x70000000 0x200000 0x300000;" \ - "bootm 0x70000000" - /* Defines for SPL */ #define CONFIG_SPL_MAX_SIZE (12 * SZ_1K) #define CONFIG_SPL_STACK (SZ_16K) diff --git a/include/configs/crs3xx-98dx3236.h b/include/configs/crs3xx-98dx3236.h index 27b45a7..4dbc758 100644 --- a/include/configs/crs3xx-98dx3236.h +++ b/include/configs/crs3xx-98dx3236.h @@ -11,7 +11,6 @@ */ #define CONFIG_SYS_BOOTM_LEN (64 * 1024 * 1024) /* 64 MB */ -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg /* Environment in SPI NOR flash */ diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index f7c5d40..97c9276 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -18,7 +18,6 @@ * SoC Configuration */ #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH -#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) @@ -136,10 +135,6 @@ 59, 60, 61, 62, 63 } #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 10 - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SYS_NAND_SELF_INIT -#endif #endif /* @@ -171,10 +166,6 @@ #define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) #define CONFIG_HWCONFIG /* enable hwconfig */ -#define CONFIG_BOOTCOMMAND \ - "run envboot; " \ - "run mmcboot; " - #define DEFAULT_LINUX_BOOT_ENV \ "loadaddr=0xc0700000\0" \ "fdtaddr=0xc0600000\0" \ diff --git a/include/configs/dart_6ul.h b/include/configs/dart_6ul.h index dd1ba49..fcdf7e9 100644 --- a/include/configs/dart_6ul.h +++ b/include/configs/dart_6ul.h @@ -90,8 +90,6 @@ "fit_addr=0x82000000\0" \ ENV_MMC -#define CONFIG_BOOTCOMMAND "run mmc_mmc_fit" - #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(MMC, mmc, 1) \ diff --git a/include/configs/db-xc3-24g4xg.h b/include/configs/db-xc3-24g4xg.h index 6a4c5a7..1d242bf 100644 --- a/include/configs/db-xc3-24g4xg.h +++ b/include/configs/db-xc3-24g4xg.h @@ -6,12 +6,6 @@ #ifndef _CONFIG_DB_XC3_24G4G_H #define _CONFIG_DB_XC3_24G4G_H -/* - * High Level Configuration Options (easy to change) - */ - -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg - /* Environment in SPI NOR flash */ /* NAND */ diff --git a/include/configs/deneb.h b/include/configs/deneb.h index a33165c..f155bb8 100644 --- a/include/configs/deneb.h +++ b/include/configs/deneb.h @@ -9,9 +9,6 @@ #include "capricorn-common.h" -#undef CONFIG_IDENT_STRING -#define CONFIG_IDENT_STRING GENERATE_CCP_VERSION("01", "06") - /* DDR3 board total DDR is 2 GB */ #undef PHYS_SDRAM_1_SIZE #define PHYS_SDRAM_1_SIZE 0x80000000 /* 2 GB */ diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h index 8e8ea56..1e24d05 100644 --- a/include/configs/devkit3250.h +++ b/include/configs/devkit3250.h @@ -28,7 +28,6 @@ /* * GPIO */ -#define CONFIG_LPC32XX_GPIO /* * Ethernet @@ -84,14 +83,6 @@ * Environment */ -#define CONFIG_BOOTCOMMAND \ - "dhcp; " \ - "tftp ${loadaddr} ${serverip}:${tftpdir}/${bootfile}; " \ - "tftp ${dtbaddr} ${serverip}:${tftpdir}/devkit3250.dtb; " \ - "setenv nfsargs ip=dhcp root=/dev/nfs nfsroot=${serverip}:${nfsroot},tcp; " \ - "setenv bootargs ${bootargs} ${nfsargs} ${userargs}; " \ - "bootm ${loadaddr} - ${dtbaddr}" - #define CONFIG_EXTRA_ENV_SETTINGS \ "autoload=no\0" \ "ethaddr=00:01:90:00:C0:81\0" \ diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 591a33f..9282f83 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -46,15 +46,6 @@ /* TWL4030 */ -/* Board NAND Info */ -#define CONFIG_JFFS2_NAND -/* nand device jffs2 lives on */ -#define CONFIG_JFFS2_DEV "nand0" -/* start of jffs2 partition */ -#define CONFIG_JFFS2_PART_OFFSET 0x680000 -#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ - /* partition */ - /* BOOTP/DHCP options */ #define CONFIG_BOOTP_NISDOMAIN #define CONFIG_BOOTP_BOOTFILESIZE @@ -126,8 +117,6 @@ "fi; " \ "else run nandboot; fi\0" -#define CONFIG_BOOTCOMMAND "run autoboot" - /* Boot Argument Buffer Size */ /* Defines for SPL */ diff --git a/include/configs/dfi-bt700.h b/include/configs/dfi-bt700.h index 6d0e68e..53ed7de 100644 --- a/include/configs/dfi-bt700.h +++ b/include/configs/dfi-bt700.h @@ -26,12 +26,6 @@ #define VIDEO_IO_OFFSET 0 #define CONFIG_X86EMU_RAW_IO -#undef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND \ - "load scsi 0:1 03000000 /boot/vmlinuz-${kernel-ver}-generic;" \ - "load scsi 0:1 04000000 /boot/initrd.img-${kernel-ver}-generic;" \ - "run boot" - #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ "kernel-ver=4.4.0-24\0" \ diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h index ee56eb6..8b8cd4c 100644 --- a/include/configs/dh_imx6.h +++ b/include/configs/dh_imx6.h @@ -64,13 +64,6 @@ #endif #endif -/* Watchdog */ -#if defined(CONFIG_SPL_BUILD) -#undef CONFIG_WDT -#undef CONFIG_WATCHDOG -#define CONFIG_HW_WATCHDOG -#endif - #ifndef CONFIG_SPL_BUILD #define CONFIG_EXTRA_ENV_SETTINGS \ "console=ttymxc0,115200\0" \ @@ -84,8 +77,6 @@ "fdtfile=imx6q-dhcom-pdk2.dtb\0"\ BOOTENV -#define CONFIG_BOOTCOMMAND "run distro_bootcmd" - #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(MMC, mmc, 2) \ diff --git a/include/configs/display5.h b/include/configs/display5.h index 329a60f..38ac869 100644 --- a/include/configs/display5.h +++ b/include/configs/display5.h @@ -56,16 +56,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define CONFIG_SYS_FSL_USDHC_NUM 2 -#ifndef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND "if run check_em_pad; then " \ - "run recovery;" \ - "else if test ${BOOT_FROM} = FACTORY; then " \ - "run factory_nfs;" \ - "else " \ - "run boot_mmc;" \ - "fi;fi" -#endif - #define PARTS_DEFAULT \ /* Linux partitions */ \ "partitions=" \ @@ -200,7 +190,6 @@ "altbootcmd=run recovery\0" \ "bootdelay=1\0" \ "baudrate=115200\0" \ - "bootcmd=" CONFIG_BOOTCOMMAND "\0" \ "ethact=FEC\0" \ "netdev=eth0\0" \ "boot_os=y\0" \ @@ -325,13 +314,6 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -/* Watchdog */ -#if defined(CONFIG_SPL_BUILD) -#undef CONFIG_WDT -#undef CONFIG_WATCHDOG -#define CONFIG_HW_WATCHDOG -#endif - /* ENV config */ #ifdef CONFIG_ENV_IS_IN_SPI_FLASH /* The 0x120000 value corresponds to above SPI-NOR memory MAP */ diff --git a/include/configs/dns325.h b/include/configs/dns325.h index 18ff1bb..0590704 100644 --- a/include/configs/dns325.h +++ b/include/configs/dns325.h @@ -12,12 +12,6 @@ #ifndef _CONFIG_DNS325_H #define _CONFIG_DNS325_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -#define CONFIG_KW88F6281 /* SOC Name */ - #include "mv-common.h" /* Remove or override few declarations from mv-common.h */ @@ -32,7 +26,6 @@ /* * Enable GPI0 support */ -#define CONFIG_KIRKWOOD_GPIO /* * Environment variables configurations @@ -72,17 +65,4 @@ "setenv bootenvrootfstype ${nandrootfstype}; " \ "setenv bootenvloadimage ${nandloadimage}\0" -#define CONFIG_BOOTCOMMAND \ - "if test -n ${bootenv} && usb start; then " \ - "if run loadbootenv; then " \ - "echo Loaded environment ${bootenv} from usb;" \ - "run importbootenv;" \ - "fi;" \ - "if test -n ${bootenvcmd}; then " \ - "echo Running bootenvcmd ...;" \ - "run bootenvcmd;" \ - "fi;" \ - "fi;" \ - "run setnandbootenv subbootcmd;" - #endif /* _CONFIG_DNS325_H */ diff --git a/include/configs/dockstar.h b/include/configs/dockstar.h index 75a2476..0ad04ee 100644 --- a/include/configs/dockstar.h +++ b/include/configs/dockstar.h @@ -12,12 +12,6 @@ #define _CONFIG_DOCKSTAR_H /* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ -#define CONFIG_KW88F6281 1 /* SOC Name */ - -/* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros */ @@ -34,13 +28,6 @@ /* * Default environment variables */ -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ - "ubi part root; " \ - "ubifsmount ubi:root; " \ - "ubifsload 0x800000 ${kernel}; " \ - "ubifsload 0x1100000 ${initrd}; " \ - "bootm 0x800000 0x1100000" #define CONFIG_EXTRA_ENV_SETTINGS \ "console=console=ttyS0,115200\0" \ diff --git a/include/configs/draco.h b/include/configs/draco.h index 29ce3a5..d305608 100644 --- a/include/configs/draco.h +++ b/include/configs/draco.h @@ -47,24 +47,6 @@ #ifndef CONFIG_RESTORE_FLASH /* set to negative value for no autoboot */ - -#define CONFIG_BOOTCOMMAND \ -"if dfubutton; then " \ - "run dfu_start; " \ - "reset; " \ -"fi;" \ -"run nand_boot;" \ -"run nand_boot_backup;" \ -"reset;" - -#else - -#define CONFIG_BOOTCOMMAND \ - "setenv autoload no; " \ - "dhcp; " \ - "if tftp 80000000 debrick.scr; then " \ - "source 80000000; " \ - "fi" #endif #endif /* CONFIG_SPL_BUILD */ #endif /* ! __CONFIG_DRACO_H */ diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h index 5b71f70..beea234 100644 --- a/include/configs/dreamplug.h +++ b/include/configs/dreamplug.h @@ -11,12 +11,7 @@ #ifndef _CONFIG_DREAMPLUG_H #define _CONFIG_DREAMPLUG_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ - -#include "mv-plug-common.h" +#include "mv-common.h" /* * Environment variables configurations @@ -30,11 +25,6 @@ /* * Default environment variables */ -#define CONFIG_BOOTCOMMAND "setenv ethact ethernet-controller@72000; " \ - "${x_bootcmd_ethernet}; setenv ethact ethernet-controller@76000; " \ - "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\ - "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ - "bootm 0x6400000;" #define CONFIG_EXTRA_ENV_SETTINGS \ "x_bootcmd_ethernet=ping 192.168.2.1\0" \ diff --git a/include/configs/ds109.h b/include/configs/ds109.h index 62fe144..8553ea0 100644 --- a/include/configs/ds109.h +++ b/include/configs/ds109.h @@ -11,12 +11,7 @@ #ifndef _CONFIG_DS109_H #define _CONFIG_DS109_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ - -#include "mv-plug-common.h" +#include "mv-common.h" /* * Environment variables configurations @@ -30,10 +25,6 @@ /* * Default environment variables */ -#define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \ - "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\ - "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ - "bootm 0x6400000;" #define CONFIG_EXTRA_ENV_SETTINGS \ "x_bootcmd_ethernet=ping 192.168.1.2\0" \ diff --git a/include/configs/ds414.h b/include/configs/ds414.h index 1f2d2c5..7fba2b4 100644 --- a/include/configs/ds414.h +++ b/include/configs/ds414.h @@ -58,11 +58,6 @@ #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) /* Default Environment */ -#define CONFIG_BOOTCOMMAND \ - "sf probe; " \ - "sf read ${loadaddr} 0xd0000 0x2d0000; " \ - "sf read ${ramdisk_addr_r} 0x3a0000 0x430000; " \ - "bootm ${loadaddr} ${ramdisk_addr_r}" #define CONFIG_EXTRA_ENV_SETTINGS \ "initrd_high=0xffffffff\0" \ diff --git a/include/configs/durian.h b/include/configs/durian.h index 1dec09b..c0ea42e 100644 --- a/include/configs/durian.h +++ b/include/configs/durian.h @@ -16,7 +16,6 @@ #define CONFIG_SYS_INIT_SP_ADDR (0x88000000 - 0x100000) /* PCI CONFIG */ -#define CONFIG_SYS_PCI_64BIT 1 #define CONFIG_PCI_SCAN_SHOW /* SCSI */ diff --git a/include/configs/eagle.h b/include/configs/eagle.h index ee53504..b8a7b5a 100644 --- a/include/configs/eagle.h +++ b/include/configs/eagle.h @@ -18,7 +18,6 @@ /* Board Clock */ /* XTAL_CLK : 33.33MHz */ -#define CONFIG_SYS_CLK_FREQ 33333333u /* Generic Timer Definitions (use in assembler source) */ #define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */ diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h index 1949c3f..62b62e0 100644 --- a/include/configs/eb_cpu5282.h +++ b/include/configs/eb_cpu5282.h @@ -18,8 +18,6 @@ #undef CONFIG_MONITOR_IS_IN_RAM /* starts uboot direct */ -#define CONFIG_BOOTCOMMAND "printenv" - /*----------------------------------------------------------------------* * Options * *----------------------------------------------------------------------*/ @@ -27,8 +25,6 @@ #define CONFIG_BOOT_RETRY_TIME -1 #define CONFIG_RESET_TO_RETRY -#define CONFIG_HW_WATCHDOG - #define STATUS_LED_ACTIVE 0 /*----------------------------------------------------------------------* @@ -189,8 +185,6 @@ * I2C */ -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR - #ifdef CONFIG_CMD_DATE #define CONFIG_RTC_DS1338 #define CONFIG_I2C_RTC_ADDR 0x68 diff --git a/include/configs/ebisu.h b/include/configs/ebisu.h index 48d4c8a..081d5e9 100644 --- a/include/configs/ebisu.h +++ b/include/configs/ebisu.h @@ -25,7 +25,6 @@ #define CONFIG_FLASH_SHOW_PROGRESS 45 #define CONFIG_SYS_FLASH_QUIET_TEST #define CONFIG_SYS_FLASH_BANKS_LIST { 0x08000000 } -#define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 #define CONFIG_SYS_MAX_FLASH_SECT 256 diff --git a/include/configs/edison.h b/include/configs/edison.h index 3ec35db..02f33f3 100644 --- a/include/configs/edison.h +++ b/include/configs/edison.h @@ -14,9 +14,6 @@ #define CONFIG_SYS_MAXARGS 128 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* Memory */ -#define CONFIG_PHYSMEM - #define CONFIG_SYS_STACK_SIZE (32 * 1024) #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index 664d6d1..e20e058 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -28,9 +28,6 @@ * High Level Configuration Options (easy to change) */ -#define CONFIG_FEROCEON 1 /* CPU Core subversion */ -#define CONFIG_88F5182 1 /* SOC Name */ - #include <asm/arch/orion5x.h> /* * CLKs configurations @@ -113,8 +110,6 @@ */ #ifdef CONFIG_IDE #define __io -/* Needs byte-swapping for ATA data register */ -#define CONFIG_IDE_SWAP_IO /* Data, registers and alternate blocks are at the same offset */ #define CONFIG_SYS_ATA_DATA_OFFSET (0x0100) #define CONFIG_SYS_ATA_REG_OFFSET (0x0100) diff --git a/include/configs/efi-x86_app.h b/include/configs/efi-x86_app.h index 6061a6d..33afb7c 100644 --- a/include/configs/efi-x86_app.h +++ b/include/configs/efi-x86_app.h @@ -10,8 +10,33 @@ #undef CONFIG_TPM_TIS_BASE_ADDRESS +/* + * Select the output device: Put an 'x' prefix before one of these to disable it + */ + +/* + * Video output - can normally continue after exit_boot_services has been + * called, since output to the display does not require EFI services at that + * point. U-Boot sets up the console memory and does its own drawing. + */ #define CONFIG_STD_DEVICES_SETTINGS "stdin=serial\0" \ "stdout=vidconsole\0" \ "stderr=vidconsole\0" +/* + * Serial output with no console. Run qemu with: + * + * -display none -serial mon:stdio + * + * This will hang or fail to output on the console after exit_boot_services is + * called. + */ +#define xCONFIG_STD_DEVICES_SETTINGS "stdin=serial\0" \ + "stdout=serial\0" \ + "stderr=serial\0" + +#undef CONFIG_BOOTCOMMAND + +#define CONFIG_BOOTCOMMAND "part list efi 0; fatls efi 0:1" + #endif diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h index 9769155..d001580 100644 --- a/include/configs/embestmx6boards.h +++ b/include/configs/embestmx6boards.h @@ -52,7 +52,6 @@ #endif /* Framebuffer */ -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP diff --git a/include/configs/etamin.h b/include/configs/etamin.h index 3ff86ee..dc83ab7 100644 --- a/include/configs/etamin.h +++ b/include/configs/etamin.h @@ -84,9 +84,6 @@ */ /* nedded by compliance test in read mode */ -#if defined(CONFIG_SPL_CMT) -#define CONFIG_SYS_DCACHE_OFF -#endif /* Define own nand partitions */ #define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE) @@ -166,26 +163,5 @@ CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ CONFIG_ENV_SETTINGS_V2 \ CONFIG_ENV_SETTINGS_NAND_V2 - -#ifndef CONFIG_RESTORE_FLASH - -#define CONFIG_BOOTCOMMAND \ -"if dfubutton; then " \ - "run dfu_start; " \ - "reset; " \ -"fi;" \ -"run nand_boot;" \ -"run nand_boot_backup;" \ -"reset;" - - -#else -#define CONFIG_BOOTCOMMAND \ - "setenv autoload no; " \ - "dhcp; " \ - "if tftp 80000000 debrick.scr; then " \ - "source 80000000; " \ - "fi" -#endif #endif /* CONFIG_SPL_BUILD */ #endif /* ! __CONFIG_ETAMIN_H */ diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index c0bdfd3..ccf615e 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -54,9 +54,6 @@ #endif /* JFFS2 */ -#ifdef CONFIG_CMD_JFFS2 -#define CONFIG_JFFS2_NAND -#endif /* Ethernet */ #define CONFIG_NET_RETRY_COUNT 20 @@ -66,7 +63,6 @@ /* MMC */ #ifdef CONFIG_CMD_MMC -#define CONFIG_GENERIC_ATMEL_MCI #define CONFIG_SYS_MMC_CD_PIN AT91_PIO_PORTC, 8 #endif @@ -118,9 +114,6 @@ /* File systems */ /* Boot command */ -#define CONFIG_BOOTCOMMAND "sf probe 0:0; " \ - "sf read 0x22000000 0xc6000 0x294000; " \ - "bootm 0x22000000" /* Misc. u-boot settings */ diff --git a/include/configs/evb_ast2500.h b/include/configs/evb_ast2500.h index dc032c1..b109a15 100644 --- a/include/configs/evb_ast2500.h +++ b/include/configs/evb_ast2500.h @@ -13,4 +13,8 @@ #define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE +/* Misc */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "" + #endif /* __CONFIG_H */ diff --git a/include/configs/evb_ast2600.h b/include/configs/evb_ast2600.h index 177a52e..3c2155d 100644 --- a/include/configs/evb_ast2600.h +++ b/include/configs/evb_ast2600.h @@ -10,4 +10,15 @@ #define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE +/* Misc */ +#define STR_HELPER(s) #s +#define STR(s) STR_HELPER(s) + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=" STR(CONFIG_SYS_LOAD_ADDR) "\0" \ + "bootspi=fdt addr 20100000 && fdt header get fitsize totalsize && " \ + "cp.b 20100000 ${loadaddr} ${fitsize} && bootm; " \ + "echo Error loading kernel FIT image\0" \ + "" + #endif /* __CONFIG_H */ diff --git a/include/configs/evb_px30.h b/include/configs/evb_px30.h index 27201fc..53781ba 100644 --- a/include/configs/evb_px30.h +++ b/include/configs/evb_px30.h @@ -12,6 +12,4 @@ "stdout=serial,vidconsole\0" \ "stderr=serial,vidconsole\0" -#define CONFIG_SUPPORT_EMMC_RPMB - #endif diff --git a/include/configs/evb_rk3308.h b/include/configs/evb_rk3308.h index e8893eb..0273e75 100644 --- a/include/configs/evb_rk3308.h +++ b/include/configs/evb_rk3308.h @@ -8,8 +8,6 @@ #include <configs/rk3308_common.h> -#define CONFIG_SUPPORT_EMMC_RPMB - #define ROCKCHIP_DEVICE_SETTINGS \ "stdout=serial,vidconsole\0" \ "stderr=serial,vidconsole\0" diff --git a/include/configs/evb_rk3568.h b/include/configs/evb_rk3568.h index 2b255a1..a0f2383 100644 --- a/include/configs/evb_rk3568.h +++ b/include/configs/evb_rk3568.h @@ -8,8 +8,6 @@ #include <configs/rk3568_common.h> -#define CONFIG_SUPPORT_EMMC_RPMB - #define ROCKCHIP_DEVICE_SETTINGS \ "stdout=serial,vidconsole\0" \ "stderr=serial,vidconsole\0" diff --git a/include/configs/evb_rv1108.h b/include/configs/evb_rv1108.h index b742d98..13e3cb2 100644 --- a/include/configs/evb_rv1108.h +++ b/include/configs/evb_rv1108.h @@ -18,11 +18,4 @@ "serverip=172.16.12.69\0" \ "" -#undef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND \ - "sf probe;" \ - "sf read 0x62000000 0x140800 0x500000;" \ - "dcache off;" \ - "go 0x62000000" - #endif diff --git a/include/configs/exynos-common.h b/include/configs/exynos-common.h index 95aaa74..eb26069 100644 --- a/include/configs/exynos-common.h +++ b/include/configs/exynos-common.h @@ -19,8 +19,7 @@ /* Keep L2 Cache Disabled */ /* input clock of PLL: 24MHz input clock */ -#define CONFIG_SYS_CLK_FREQ 24000000 -#define COUNTER_FREQUENCY CONFIG_SYS_CLK_FREQ +#define COUNTER_FREQUENCY 24000000 /* select serial console configuration */ diff --git a/include/configs/exynos5-dt-common.h b/include/configs/exynos5-dt-common.h index cc9ffda..00b6778 100644 --- a/include/configs/exynos5-dt-common.h +++ b/include/configs/exynos5-dt-common.h @@ -30,7 +30,4 @@ #define LCD_BPP LCD_COLOR16 #endif -/* Enable keyboard */ -#define CONFIG_KEYBOARD - #endif diff --git a/include/configs/exynos78x0-common.h b/include/configs/exynos78x0-common.h index 478a0c4..8d3449f 100644 --- a/include/configs/exynos78x0-common.h +++ b/include/configs/exynos78x0-common.h @@ -67,23 +67,6 @@ #define PHYS_SDRAM_12 (CONFIG_SYS_SDRAM_BASE + (11 * SDRAM_BANK_SIZE)) #define PHYS_SDRAM_12_SIZE SDRAM_BANK_SIZE -#define CONFIG_DEBUG_UART_CLOCK 132710400 - -#define CONFIG_PREBOOT \ -"echo Read pressed buttons status;" \ -"KEY_VOLUMEUP=gpa20;" \ -"KEY_HOME=gpa17;" \ -"KEY_VOLUMEDOWN=gpa21;" \ -"KEY_POWER=gpa00;" \ -"PRESSED=0;" \ -"RELEASED=1;" \ -"if gpio input $KEY_VOLUMEUP; then setenv VOLUME_UP $PRESSED; " \ -"else setenv VOLUME_UP $RELEASED; fi;" \ -"if gpio input $KEY_VOLUMEDOWN; then setenv VOLUME_DOWN $PRESSED; " \ -"else setenv VOLUME_DOWN $RELEASED; fi;" \ -"if gpio input $KEY_HOME; then setenv HOME $PRESSED; else setenv HOME $RELEASED; fi;" \ -"if gpio input $KEY_POWER; then setenv POWER $PRESSED; else setenv POWER $RELEASED; fi;" - #ifndef MEM_LAYOUT_ENV_SETTINGS #define MEM_LAYOUT_ENV_SETTINGS \ "bootm_size=0x10000000\0" \ diff --git a/include/configs/falcon.h b/include/configs/falcon.h index d783faf..1d6a9b9 100644 --- a/include/configs/falcon.h +++ b/include/configs/falcon.h @@ -26,7 +26,6 @@ /* Board Clock */ /* XTAL_CLK : 16.66MHz */ -#define CONFIG_SYS_CLK_FREQ 16666666u /* Generic Timer Definitions (use in assembler source) */ #define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */ diff --git a/include/configs/firefly_rk3308.h b/include/configs/firefly_rk3308.h index 3af2493..28e3a54 100644 --- a/include/configs/firefly_rk3308.h +++ b/include/configs/firefly_rk3308.h @@ -8,8 +8,6 @@ #include <configs/rk3308_common.h> -#define CONFIG_SUPPORT_EMMC_RPMB - #define ROCKCHIP_DEVICE_SETTINGS \ "stdout=serial,vidconsole\0" \ "stderr=serial,vidconsole\0" diff --git a/include/configs/gazerbeam.h b/include/configs/gazerbeam.h index ec5fc15..c7fdf7c 100644 --- a/include/configs/gazerbeam.h +++ b/include/configs/gazerbeam.h @@ -100,22 +100,4 @@ __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \ "upd=run load update\0" \ -#define NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp ${kernel_addr} $bootfile;" \ - "tftp ${fdt_addr} $fdtfile;" \ - "bootm ${kernel_addr} - ${fdt_addr}" - -#define MMCBOOTCOMMAND \ - "setenv bootargs root=/dev/mmcblk0p3 rw rootwait " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "ext2load mmc 0:2 ${kernel_addr} $bootfile;" \ - "ext2load mmc 0:2 ${fdt_addr} $fdtfile;" \ - "bootm ${kernel_addr} - ${fdt_addr}" - -#define CONFIG_BOOTCOMMAND MMCBOOTCOMMAND - #endif /* __CONFIG_H */ diff --git a/include/configs/ge_b1x5v2.h b/include/configs/ge_b1x5v2.h index 1a5db24..b4f9499 100644 --- a/include/configs/ge_b1x5v2.h +++ b/include/configs/ge_b1x5v2.h @@ -119,6 +119,4 @@ "run showsplashscreen; sleep 1; " \ "run doboot; run failbootcmd;\0" \ -#define CONFIG_BOOTCOMMAND "run tryboot;" - #endif /* __GE_B1X5V2_CONFIG_H */ diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index 0eeffd4..bde14a7 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -98,15 +98,6 @@ "run doboot; " \ "run failbootcmd\0" \ -#define MMCBOOTCOMMAND \ - "run doquiet; " \ - "run tryboot; " \ - -#ifdef CONFIG_CMD_NFS -#define CONFIG_BOOTCOMMAND NETWORKBOOTCOMMAND -#else -#define CONFIG_BOOTCOMMAND MMCBOOTCOMMAND -#endif /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/giedi.h b/include/configs/giedi.h index dabb1fb..19a795b 100644 --- a/include/configs/giedi.h +++ b/include/configs/giedi.h @@ -9,9 +9,6 @@ #include "capricorn-common.h" -#undef CONFIG_IDENT_STRING -#define CONFIG_IDENT_STRING GENERATE_CCP_VERSION("01", "07") - /* DDR3 board total DDR is 1 GB */ #undef PHYS_SDRAM_1_SIZE #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1 GB */ diff --git a/include/configs/goflexhome.h b/include/configs/goflexhome.h index 43027a5..90e37d9 100644 --- a/include/configs/goflexhome.h +++ b/include/configs/goflexhome.h @@ -15,12 +15,6 @@ #define _CONFIG_GOFLEXHOME_H /* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ -#define CONFIG_KW88F6281 1 /* SOC Name */ - -/* * Default GPIO configuration and LED status */ #define GOFLEXHOME_OE_LOW (~(0)) @@ -49,12 +43,6 @@ /* * Default environment variables */ -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ - "ubi part root; " \ - "ubifsmount ubi:root; " \ - "ubifsload 0x800000 ${kernel}; " \ - "bootm 0x800000" #define CONFIG_EXTRA_ENV_SETTINGS \ "console=console=ttyS0,115200\0" \ diff --git a/include/configs/gose.h b/include/configs/gose.h index 60a89e00..01657d7 100644 --- a/include/configs/gose.h +++ b/include/configs/gose.h @@ -30,8 +30,6 @@ #define CONFIG_BITBANGMII_MULTI /* Board Clock */ -#define RMOBILE_XTAL_CLK 20000000u -#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" diff --git a/include/configs/grpeach.h b/include/configs/grpeach.h index 29a446c..fb01c56 100644 --- a/include/configs/grpeach.h +++ b/include/configs/grpeach.h @@ -9,7 +9,6 @@ #define __GRPEACH_H /* Board Clock , P1 clock frequency (XTAL=13.33MHz) */ -#define CONFIG_SYS_CLK_FREQ 66666666 /* Miscellaneous */ #define CONFIG_SYS_PBSIZE 256 diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h index 8de888f..25c5a97 100644 --- a/include/configs/guruplug.h +++ b/include/configs/guruplug.h @@ -9,20 +9,7 @@ #ifndef _CONFIG_GURUPLUG_H #define _CONFIG_GURUPLUG_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ - -/* - * Standard filesystems - */ - -/* - * mv-plug-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#include "mv-plug-common.h" +#include "mv-common.h" /* * Environment variables configurations @@ -40,15 +27,6 @@ /* * Default environment variables */ -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ - "ubi part root; " \ - "ubifsmount ubi:rootfs; " \ - "ubifsload 0x800000 ${kernel}; " \ - "ubifsload 0x700000 ${fdt}; " \ - "ubifsumount; " \ - "fdt addr 0x700000; fdt resize; fdt chosen; " \ - "bootz 0x800000 - 0x700000" #define CONFIG_EXTRA_ENV_SETTINGS \ "console=console=ttyS0,115200\0" \ diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index abceffb..513b2d4 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -72,7 +72,6 @@ #define CONFIG_USBD_HS /* Framebuffer and LCD */ -#define CONFIG_VIDEO_LOGO #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP #define CONFIG_VIDEO_BMP_LOGO @@ -254,10 +253,4 @@ "fi\0" #endif -#define CONFIG_BOOTCOMMAND \ - "for btype in ${bootdevs}; do " \ - "echo; echo Attempting ${btype} boot...; " \ - "if run ${btype}_boot; then; fi; " \ - "done" - #endif /* __CONFIG_H */ diff --git a/include/configs/harmony.h b/include/configs/harmony.h index 5a1e72c..879bd5c 100644 --- a/include/configs/harmony.h +++ b/include/configs/harmony.h @@ -24,7 +24,6 @@ #endif /* NAND support */ -#define CONFIG_TEGRA_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Environment in NAND (which is 512M), aligned to start of last sector */ diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h index 4bd3494..9783fd8 100644 --- a/include/configs/ib62x0.h +++ b/include/configs/ib62x0.h @@ -8,12 +8,6 @@ #ifndef _CONFIG_IB62x0_H #define _CONFIG_IB62x0_H -/* - * High level configuration options - */ -#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -#define CONFIG_KW88F6281 /* SOC Name */ - #include "mv-common.h" /* @@ -23,15 +17,6 @@ /* * Default environment variables */ -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ - "ubi part root; " \ - "ubifsmount ubi:rootfs; " \ - "ubifsload 0x800000 ${kernel}; " \ - "ubifsload 0x700000 ${fdt}; " \ - "ubifsumount; " \ - "fdt addr 0x700000; fdt resize; fdt chosen; " \ - "bootz 0x800000 - 0x700000" #define CONFIG_EXTRA_ENV_SETTINGS \ "console=console=ttyS0,115200\0" \ @@ -59,11 +44,4 @@ #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET #endif /* CONFIG_IDE */ -/* - * RTC driver configuration - */ -#ifdef CONFIG_CMD_DATE -#define CONFIG_RTC_MV -#endif /* CONFIG_CMD_DATE */ - #endif /* _CONFIG_IB62x0_H */ diff --git a/include/configs/iconnect.h b/include/configs/iconnect.h index 1a716df..f1aad1e 100644 --- a/include/configs/iconnect.h +++ b/include/configs/iconnect.h @@ -8,12 +8,6 @@ #ifndef _CONFIG_ICONNECT_H #define _CONFIG_ICONNECT_H -/* - * High level configuration options - */ -#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -#define CONFIG_KW88F6281 /* SOC Name */ - #include "mv-common.h" /* @@ -23,12 +17,6 @@ /* * Default environment variables */ -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ - "ubi part rootfs; " \ - "ubifsmount ubi:rootfs; " \ - "ubifsload 0x800000 ${kernel}; " \ - "bootm 0x800000" #define CONFIG_EXTRA_ENV_SETTINGS \ "console=console=ttyS0,115200\0" \ diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index 370f7ed..206a57a 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -153,7 +153,6 @@ /* * HW-Watchdog */ -#define CONFIG_WATCHDOG 1 #define CONFIG_SYS_WATCHDOG_VALUE 0xFFFF /* @@ -232,12 +231,8 @@ #define CONFIG_LOADS_ECHO #define CONFIG_TIMESTAMP -#define CONFIG_BOOTCOMMAND "run boot_cramfs" #undef CONFIG_SYS_LOADS_BAUD_CHANGE -#define CONFIG_JFFS2_NAND -#define CONFIG_JFFS2_DEV "0" - /* mtdparts command line support */ #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -272,14 +267,6 @@ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ "\0" -#define NFSBOOTCOMMAND \ - "setenv rootdev /dev/nfs;" \ - "run setipargs;run addmtd;" \ - "tftp ${loadaddr} ${bootfile};" \ - "tftp ${fdtaddr} ${fdtfile};" \ - "fdt addr ${fdtaddr};" \ - "bootm ${loadaddr} - ${fdtaddr}" - /* UBI Support */ #endif /* __CONFIG_H */ diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h index c289d69..dffe175 100644 --- a/include/configs/imx27lite-common.h +++ b/include/configs/imx27lite-common.h @@ -103,7 +103,6 @@ #define CONFIG_MXC_NAND_REGS_BASE 0xd8000000 #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0xd8000000 -#define CONFIG_JFFS2_NAND #define CONFIG_MXC_NAND_HWECC /* diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h index fed6545..b22b2fd 100644 --- a/include/configs/imx6-engicam.h +++ b/include/configs/imx6-engicam.h @@ -96,8 +96,6 @@ "run nandboot; " \ "fi\0" -#define CONFIG_BOOTCOMMAND "run $modeboot" - /* Miscellaneous configurable options */ #ifdef CONFIG_MX6UL @@ -156,7 +154,6 @@ #ifdef CONFIG_VIDEO_IPUV3 # define CONFIG_IMX_VIDEO_SKIP -# define CONFIG_VIDEO_LOGO # define CONFIG_VIDEO_BMP_LOGO #endif diff --git a/include/configs/imx6_logic.h b/include/configs/imx6_logic.h index 7665626..7e56c8e 100644 --- a/include/configs/imx6_logic.h +++ b/include/configs/imx6_logic.h @@ -108,8 +108,6 @@ "fi; " \ "fi; " \ "else run netboot; fi" -#define CONFIG_BOOTCOMMAND \ - "run autoboot" #define CONFIG_ARP_TIMEOUT 200UL diff --git a/include/configs/imx7-cm.h b/include/configs/imx7-cm.h index 01f8732..261ed90 100644 --- a/include/configs/imx7-cm.h +++ b/include/configs/imx7-cm.h @@ -16,7 +16,6 @@ #undef CONFIG_SYS_AUTOLOAD #undef CONFIG_EXTRA_ENV_SETTINGS -#undef CONFIG_BOOTCOMMAND /* * Use: @@ -33,7 +32,7 @@ "fdt_file=imx7-cm.dtb\0" \ "fdt_addr=0x83000000\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \ @@ -70,8 +69,6 @@ "bootz ${loadaddr} - ${fdt_addr}; " \ "\0" -#define CONFIG_BOOTCOMMAND "run boot${boot-mode}" - /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR @@ -88,7 +85,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR #define CONFIG_SYS_FSL_USDHC_NUM 2 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 #define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */ /* USB Configs */ diff --git a/include/configs/imx8mm-cl-iot-gate.h b/include/configs/imx8mm-cl-iot-gate.h index 6868b80..991839c 100644 --- a/include/configs/imx8mm-cl-iot-gate.h +++ b/include/configs/imx8mm-cl-iot-gate.h @@ -14,8 +14,6 @@ #define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M) #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -81,7 +79,7 @@ "initrd_addr=0x43800000\0" \ "bootm_size=0x10000000\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \ @@ -125,20 +123,6 @@ "fi; " \ "fi;\0" -#ifndef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "fi;" -#endif - /* Link Definitions */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 @@ -168,8 +152,6 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #define CONFIG_ETHPRIME "FEC" #define CONFIG_FEC_XCV_TYPE RGMII diff --git a/include/configs/imx8mm_beacon.h b/include/configs/imx8mm_beacon.h index 2bdcc0a..77f0624 100644 --- a/include/configs/imx8mm_beacon.h +++ b/include/configs/imx8mm_beacon.h @@ -11,8 +11,6 @@ #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -40,7 +38,7 @@ "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ "initrd_addr=0x43800000\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate}" \ @@ -80,18 +78,6 @@ "fi; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "fi;" - /* Link Definitions */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 @@ -105,9 +91,6 @@ #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */ -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1)) - #define CONFIG_MXC_UART_BASE UART2_BASE_ADDR /* Monitor Command Prompt */ @@ -120,7 +103,6 @@ /* USDHC */ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 /* FEC*/ #define CONFIG_ETHPRIME "FEC" diff --git a/include/configs/imx8mm_evk.h b/include/configs/imx8mm_evk.h index 167ca19..c7022ef 100644 --- a/include/configs/imx8mm_evk.h +++ b/include/configs/imx8mm_evk.h @@ -13,8 +13,6 @@ #define CONFIG_SYS_BOOTM_LEN (64 * SZ_1M) #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -53,7 +51,7 @@ "fdtfile=imx8mm-evk.dtb\0" \ "initrd_addr=0x43800000\0" \ "bootm_size=0x10000000\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ /* Link Definitions */ @@ -85,8 +83,6 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #define CONFIG_ETHPRIME "FEC" #define CONFIG_FEC_XCV_TYPE RGMII diff --git a/include/configs/imx8mm_icore_mx8mm.h b/include/configs/imx8mm_icore_mx8mm.h index 4b22ba1..d75fcf7 100644 --- a/include/configs/imx8mm_icore_mx8mm.h +++ b/include/configs/imx8mm_icore_mx8mm.h @@ -12,8 +12,6 @@ #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -30,9 +28,6 @@ # define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif /* CONFIG_SPL_BUILD */ -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1)) - #ifndef CONFIG_SPL_BUILD #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 2) \ @@ -71,10 +66,6 @@ #define PHYS_SDRAM_SIZE SZ_2G /* 2GB DDR */ #define CONFIG_SYS_BOOTM_LEN SZ_256M -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END \ - (CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1)) - /* UART */ #define CONFIG_MXC_UART_BASE UART2_BASE_ADDR @@ -88,6 +79,5 @@ /* USDHC */ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 #endif /* __IMX8MM_ICORE_MX8MM_H */ diff --git a/include/configs/imx8mm_venice.h b/include/configs/imx8mm_venice.h index f8d4142..7ab11cc 100644 --- a/include/configs/imx8mm_venice.h +++ b/include/configs/imx8mm_venice.h @@ -11,8 +11,6 @@ #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -105,7 +103,6 @@ /* USDHC */ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 /* FEC */ #define CONFIG_ETHPRIME "eth0" diff --git a/include/configs/imx8mn_beacon.h b/include/configs/imx8mn_beacon.h index f89836c..2843535 100644 --- a/include/configs/imx8mn_beacon.h +++ b/include/configs/imx8mn_beacon.h @@ -11,9 +11,6 @@ #define CONFIG_SPL_MAX_SIZE (148 * SZ_1K) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -46,7 +43,7 @@ "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ "initrd_addr=0x43800000\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console} " \ @@ -95,18 +92,6 @@ "run loadramdisk; run ramargs; " \ "booti ${loadaddr} ${ramdisk_addr} ${fdt_addr} ${optargs}\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else booti ${loadaddr} - ${fdt_addr}; fi" - /* Link Definitions */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 @@ -136,7 +121,6 @@ /* USDHC */ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 /* ENET Config */ #if defined(CONFIG_FEC_MXC) diff --git a/include/configs/imx8mn_evk.h b/include/configs/imx8mn_evk.h index ab89321..142fc3e 100644 --- a/include/configs/imx8mn_evk.h +++ b/include/configs/imx8mn_evk.h @@ -14,8 +14,6 @@ #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -52,7 +50,7 @@ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ "initrd_addr=0x43800000\0" \ "bootm_size=0x10000000\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ /* Link Definitions */ @@ -84,6 +82,4 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #endif diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h index 30cce1a..b810a55 100644 --- a/include/configs/imx8mp_evk.h +++ b/include/configs/imx8mp_evk.h @@ -14,8 +14,6 @@ #define CONFIG_SPL_MAX_SIZE (152 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD @@ -67,7 +65,7 @@ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ "initrd_addr=0x43800000\0" \ "bootm_size=0x10000000\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ /* Link Definitions */ @@ -100,6 +98,4 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #endif diff --git a/include/configs/imx8mq_cm.h b/include/configs/imx8mq_cm.h index 7206c08..b099004 100644 --- a/include/configs/imx8mq_cm.h +++ b/include/configs/imx8mq_cm.h @@ -14,8 +14,6 @@ #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_STACK 0x187FF0 @@ -61,7 +59,7 @@ "fdt_file=imx8mq-cm.dtb\0" \ "initrd_addr=0x43800000\0" \ "bootm_size=0x10000000\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ /* Link Definitions */ @@ -91,6 +89,4 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #endif diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h index 49a9526..6e1d387 100644 --- a/include/configs/imx8mq_evk.h +++ b/include/configs/imx8mq_evk.h @@ -14,8 +14,6 @@ #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ @@ -72,7 +70,7 @@ "fdt_file=imx8mq-evk.dtb\0" \ "initrd_addr=0x43800000\0" \ "bootm_size=0x10000000\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ /* Link Definitions */ @@ -102,10 +100,4 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - -#define CONFIG_MXC_GPIO - -#define CONFIG_OF_SYSTEM_SETUP - #endif diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h index 0366c11..1668ca8 100644 --- a/include/configs/imx8mq_phanbell.h +++ b/include/configs/imx8mq_phanbell.h @@ -11,8 +11,6 @@ #define CONFIG_SPL_MAX_SIZE (172 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ @@ -62,7 +60,7 @@ "initrd_addr=0x43800000\0" \ "initrd_high=0xffffffffffffffff\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \ @@ -103,18 +101,6 @@ "booti; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else booti ${loadaddr} - ${fdt_addr}; fi" - /* Link Definitions */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 @@ -130,10 +116,6 @@ #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x40000000 /* 1GB DDR */ -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ - (PHYS_SDRAM_SIZE >> 1)) - #define CONFIG_MXC_UART_BASE UART1_BASE_ADDR /* Monitor Command Prompt */ @@ -146,10 +128,4 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - -#define CONFIG_MXC_GPIO - -#define CONFIG_OF_SYSTEM_SETUP - #endif diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h index 11b5c16..884d741 100644 --- a/include/configs/imx8qm_mek.h +++ b/include/configs/imx8qm_mek.h @@ -15,8 +15,6 @@ #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800 #define CONFIG_SPL_STACK 0x013E000 #define CONFIG_SPL_BSS_START_ADDR 0x00128000 @@ -33,9 +31,6 @@ #define CONFIG_REMAKE_ELF -/* Flat Device Tree Definitions */ -#define CONFIG_OF_BOARD_SETUP - #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define USDHC1_BASE_ADDR 0x5B010000 #define USDHC2_BASE_ADDR 0x5B020000 @@ -60,7 +55,7 @@ "initrd_addr=0x83800000\0" \ "initrd_high=0xffffffffffffffff\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \ @@ -121,33 +116,12 @@ "fi;" \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if test ${sec_boot} = yes; then " \ - "if run loadcntr; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "fi; " \ - "else booti ${loadaddr} - ${fdt_addr}; fi" - /* Link Definitions */ #define CONFIG_SYS_INIT_SP_ADDR 0x80200000 /* Default environment is in SD */ -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - /* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board */ #define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */ #define CONFIG_SYS_FSL_USDHC_NUM 2 diff --git a/include/configs/imx8qm_rom7720.h b/include/configs/imx8qm_rom7720.h index 2c80f26..1a55351 100644 --- a/include/configs/imx8qm_rom7720.h +++ b/include/configs/imx8qm_rom7720.h @@ -64,7 +64,7 @@ "fdt_file=imx8qm-rom7720-a1.dtb\0" \ "initrd_addr=0x83800000\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot} earlycon\0 " \ @@ -105,33 +105,10 @@ "booti; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else booti ${loadaddr} - ${fdt_addr}; fi" - /* Link Definitions */ #define CONFIG_SYS_INIT_SP_ADDR 0x80200000 -/* Default environment is in SD */ - -#ifdef CONFIG_QSPI_BOOT -#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS -#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS -#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE -#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED -#endif - -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - /* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board, * USDHC3 is for SD on base board On DDR4 board, USDHC1 is mux for NAND, * USDHC2 is for SD, USDHC3 is for SD on base board diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h index f59a9ef..3900ef1 100644 --- a/include/configs/imx8qxp_mek.h +++ b/include/configs/imx8qxp_mek.h @@ -13,8 +13,6 @@ #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800 #define CONFIG_SPL_STACK 0x013E000 #define CONFIG_SPL_BSS_START_ADDR 0x00128000 @@ -31,9 +29,6 @@ #define CONFIG_REMAKE_ELF -/* Flat Device Tree Definitions */ -#define CONFIG_OF_BOARD_SETUP - #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define USDHC1_BASE_ADDR 0x5B010000 #define USDHC2_BASE_ADDR 0x5B020000 @@ -58,7 +53,7 @@ "initrd_addr=0x83800000\0" \ "initrd_high=0xffffffffffffffff\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot}\0 " \ @@ -119,33 +114,12 @@ "fi;" \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if test ${sec_boot} = yes; then " \ - "if run loadcntr; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "fi; " \ - "else booti ${loadaddr} - ${fdt_addr}; fi" - /* Link Definitions */ #define CONFIG_SYS_INIT_SP_ADDR 0x80200000 /* Default environment is in SD */ -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - /* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board */ #define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */ #define CONFIG_SYS_FSL_USDHC_NUM 2 diff --git a/include/configs/imx8ulp_evk.h b/include/configs/imx8ulp_evk.h index 501f465..6b25b48 100644 --- a/include/configs/imx8ulp_evk.h +++ b/include/configs/imx8ulp_evk.h @@ -12,9 +12,6 @@ #define CONFIG_SYS_BOOTM_LEN (SZ_64M) #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD @@ -64,7 +61,7 @@ "fdtfile=imx8ulp-evk.dtb\0" \ "initrd_addr=0x83800000\0" \ "bootm_size=0x10000000\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ /* Link Definitions */ diff --git a/include/configs/imxrt1020-evk.h b/include/configs/imxrt1020-evk.h index 64c0f5e..79feab3 100644 --- a/include/configs/imxrt1020-evk.h +++ b/include/configs/imxrt1020-evk.h @@ -11,7 +11,6 @@ #define CONFIG_SYS_INIT_SP_ADDR 0x20240000 -#define CONFIG_SYS_FSL_ERRATUM_ESDHC135 1 #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE 1 #define PHYS_SDRAM 0x80000000 diff --git a/include/configs/imxrt1050-evk.h b/include/configs/imxrt1050-evk.h index 99d25c1..b507895 100644 --- a/include/configs/imxrt1050-evk.h +++ b/include/configs/imxrt1050-evk.h @@ -11,7 +11,6 @@ #define CONFIG_SYS_INIT_SP_ADDR 0x20280000 -#define CONFIG_SYS_FSL_ERRATUM_ESDHC135 1 #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE 1 #define PHYS_SDRAM 0x80000000 @@ -22,7 +21,6 @@ DMAMEM_SZ_ALL) #ifdef CONFIG_DM_VIDEO -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h index 2f8ac20..6d7d798 100644 --- a/include/configs/integratorap.h +++ b/include/configs/integratorap.h @@ -24,8 +24,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTCOMMAND "" - /* Flash settings */ #define CONFIG_SYS_FLASH_SIZE 0x02000000 /* 32 MiB */ #define CONFIG_SYS_MAX_FLASH_SECT 128 diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index c4203ce..3ff7bb9 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -27,7 +27,6 @@ #define CONFIG_SMC91111_BASE 0xC8000000 #undef CONFIG_SMC91111_EXT_PHY -#define CONFIG_BOOTCOMMAND "tftpboot ; bootm" #define CONFIG_SERVERIP 192.168.1.100 #define CONFIG_IPADDR 192.168.1.104 #define CONFIG_BOOTFILE "uImage" diff --git a/include/configs/k2g_evm.h b/include/configs/k2g_evm.h index 56dd9c7..294ce46 100644 --- a/include/configs/k2g_evm.h +++ b/include/configs/k2g_evm.h @@ -50,27 +50,6 @@ "get_mon_mmc=load mmc ${bootpart} ${addr_mon} ${bootdir}/${name_mon}\0"\ "name_fs=arago-base-tisdk-image-k2g-evm.cpio\0" -#ifndef CONFIG_TI_SECURE_DEVICE -#define CONFIG_BOOTCOMMAND \ - "run findfdt; " \ - "run envboot; " \ - "run init_${boot}; " \ - "run get_mon_${boot} run_mon; " \ - "run set_name_pmmc get_pmmc_${boot} run_pmmc; " \ - "run get_kern_${boot}; " \ - "run init_fw_rd_${boot}; " \ - "run get_fdt_${boot}; " \ - "run run_kern" -#else -#define CONFIG_BOOTCOMMAND \ - "run findfdt; " \ - "run envboot; " \ - "run run_mon_hs; " \ - "run init_${boot}; " \ - "run get_fit_${boot}; " \ - "bootm ${addr_fit}#${name_fdt}" -#endif - /* NAND Configuration */ #define CONFIG_SYS_NAND_PAGE_2K diff --git a/include/configs/km/km-mpc8309.h b/include/configs/km/km-mpc8309.h index 869bd9b..98204bd 100644 --- a/include/configs/km/km-mpc8309.h +++ b/include/configs/km/km-mpc8309.h @@ -5,12 +5,6 @@ #define CONFIG_KM_DEF_ARCH "arch=ppc_82xx\0" -/* - * System Clock Setup - */ -#define CONFIG_SYS_CLK_FREQ 66000000 -#define CONFIG_83XX_PCICLK 66000000 - /* QE microcode/firmware address */ /* between the u-boot partition and env */ diff --git a/include/configs/km/km-mpc832x.h b/include/configs/km/km-mpc832x.h index de6e7da..888bb29 100644 --- a/include/configs/km/km-mpc832x.h +++ b/include/configs/km/km-mpc832x.h @@ -1,15 +1,4 @@ /* - * High Level Configuration Options - */ -#define CONFIG_KM8321 /* Keymile PBEC8321 board specific */ - -/* - * System Clock Setup - */ -#define CONFIG_SYS_CLK_FREQ 66000000 -#define CONFIG_83XX_PCICLK 66000000 - -/* * System IO Config */ #define CONFIG_SYS_SICRL SICRL_IRQ_CKS @@ -69,6 +58,3 @@ #define CONFIG_SYS_KMBEC_FPGA_BASE 0xE8000000 #define CONFIG_SYS_KMBEC_FPGA_SIZE 128 - -/* EEprom support */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index cca624e..a485c3a 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -19,12 +19,6 @@ #ifndef _CONFIG_KM_ARM_H #define _CONFIG_KM_ARM_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -#define CONFIG_KW88F6281 /* SOC Name */ - #define CONFIG_NAND_ECC_BCH /* include common defines/options for all Keymile boards */ @@ -74,7 +68,6 @@ #undef CONFIG_I2C_MVTWSI #define CONFIG_SYS_I2C_INIT_BOARD -#define CONFIG_KIRKWOOD_GPIO /* Enable GPIO Support */ #define CONFIG_SYS_NUM_I2C_BUSES 6 #define CONFIG_SYS_I2C_MAX_HOPS 1 #define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \ diff --git a/include/configs/km/pg-wcom-ls102xa.h b/include/configs/km/pg-wcom-ls102xa.h index 743d09e..ba0e4dd 100644 --- a/include/configs/km/pg-wcom-ls102xa.h +++ b/include/configs/km/pg-wcom-ls102xa.h @@ -6,8 +6,6 @@ #ifndef __CONFIG_PG_WCOM_LS102XA_H #define __CONFIG_PG_WCOM_LS102XA_H -#define CONFIG_SYS_FSL_CLK - /* include common defines/options for all Keymile boards */ #include "keymile-common.h" @@ -18,8 +16,6 @@ CONFIG_KM_PHRAM + \ CONFIG_KM_RESERVED_PRAM) >> 10) -#define CONFIG_SYS_CLK_FREQ 66666666 - #define PHYS_SDRAM 0x80000000 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) @@ -40,7 +36,6 @@ * IFC Definitions */ /* NOR Flash Definitions */ -#define CONFIG_FSL_IFC #define CONFIG_SYS_FLASH_BASE 0x60000000 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h index 82c2a12..e58a695 100644 --- a/include/configs/km_kirkwood.h +++ b/include/configs/km_kirkwood.h @@ -34,8 +34,6 @@ /* KM_KIRKWOOD_128M16 */ #elif defined(CONFIG_KM_KIRKWOOD_128M16) #define CONFIG_HOSTNAME "km_kirkwood_128m16" -#undef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg #define CONFIG_KM_DISABLE_PCIE /* KM_NUSA */ @@ -43,21 +41,14 @@ #define CONFIG_HOSTNAME "kmnusa" -#undef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg - /* KMCOGE5UN */ #elif defined(CONFIG_KM_COGE5UN) -#undef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg #define CONFIG_HOSTNAME "kmcoge5un" #define CONFIG_KM_DISABLE_PCIE /* KM_SUSE2 */ #elif defined(CONFIG_KM_SUSE2) #define CONFIG_HOSTNAME "kmsuse2" -#undef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg #define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048" #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE #else diff --git a/include/configs/kmcent2.h b/include/configs/kmcent2.h index 4dbd53c..98e5723 100644 --- a/include/configs/kmcent2.h +++ b/include/configs/kmcent2.h @@ -141,14 +141,11 @@ #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS #define CONFIG_PCIE1 /* PCIE controller 1 */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ /* Environment in parallel NOR-Flash */ #define CONFIG_ENV_TOTAL_SIZE 0x040000 #define ENV_DEL_ADDR 0xebf00000 /*direct for newenv*/ -#define CONFIG_SYS_CLK_FREQ 66666666 - /* * These can be toggled for performance analysis, otherwise use default. */ @@ -362,7 +359,6 @@ * Retain non-DM serial port for debug purposes. */ #if !defined(CONFIG_DM_SERIAL) -#define CONFIG_CONS_INDEX 1 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2) diff --git a/include/configs/kmcoge5ne.h b/include/configs/kmcoge5ne.h index 60fe4ae..8f4685c 100644 --- a/include/configs/kmcoge5ne.h +++ b/include/configs/kmcoge5ne.h @@ -24,12 +24,6 @@ #include "km/km-mpc83xx.h" #include "km/km-mpc8360.h" -/* - * System Clock Setup - */ -#define CONFIG_SYS_CLK_FREQ 66000000 -#define CONFIG_83XX_PCICLK 66000000 - /** * KMCOGE5NE has 512 MB RAM */ diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h index 65a38c5..eca8998 100644 --- a/include/configs/koelsch.h +++ b/include/configs/koelsch.h @@ -30,8 +30,6 @@ #define CONFIG_BITBANGMII_MULTI /* Board Clock */ -#define RMOBILE_XTAL_CLK 20000000u -#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" diff --git a/include/configs/kontron-sl-mx6ul.h b/include/configs/kontron-sl-mx6ul.h index 34304f9..2bac000 100644 --- a/include/configs/kontron-sl-mx6ul.h +++ b/include/configs/kontron-sl-mx6ul.h @@ -59,7 +59,6 @@ #ifdef CONFIG_FSL_USDHC #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR #define CONFIG_SYS_FSL_USDHC_NUM 2 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 #endif #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h index 4152851..448749a 100644 --- a/include/configs/kontron_sl28.h +++ b/include/configs/kontron_sl28.h @@ -30,10 +30,6 @@ /* early stack pointer */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xeff0) -/* memtest command */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 -#define CONFIG_SYS_MEMTEST_END 0x9fffffff - /* SMP */ #define CPU_RELEASE_ADDR secondary_boot_addr @@ -46,8 +42,7 @@ /* serial port */ #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2) -#define CONFIG_SYS_CLK_FREQ 100000000 -#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ / 4) +#define COUNTER_FREQUENCY_REAL (get_board_sys_clk() / 4) /* ethernet */ #define CONFIG_SYS_RX_ETH_BUFFER 8 diff --git a/include/configs/kp_imx53.h b/include/configs/kp_imx53.h index c1db6ea..0983d40 100644 --- a/include/configs/kp_imx53.h +++ b/include/configs/kp_imx53.h @@ -10,8 +10,6 @@ #include <asm/arch/imx-regs.h> #include <linux/sizes.h> -#define CONFIG_SYS_FSL_CLK - /* USB Configs */ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 @@ -56,8 +54,6 @@ "bootm ${loadaddr}#${fit_config}\0" \ BOOTENV -#define CONFIG_BOOTCOMMAND "run usbupd; run distro_bootcmd" - #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(DHCP, dhcp, na) diff --git a/include/configs/kp_imx6q_tpc.h b/include/configs/kp_imx6q_tpc.h index 3061c96..c538085 100644 --- a/include/configs/kp_imx6q_tpc.h +++ b/include/configs/kp_imx6q_tpc.h @@ -82,8 +82,6 @@ "bootm ${loadaddr}#${fit_config}\0" \ BOOTENV -#define CONFIG_BOOTCOMMAND "run usbupd; run distro_bootcmd" - #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(MMC, mmc, 1) \ diff --git a/include/configs/kzm9g.h b/include/configs/kzm9g.h index c3f690c..1eb6daf 100644 --- a/include/configs/kzm9g.h +++ b/include/configs/kzm9g.h @@ -68,9 +68,8 @@ /* Clock */ #define CONFIG_GLOBAL_TIMER -#define CONFIG_SYS_CLK_FREQ (48000000) #define CONFIG_SYS_CPU_CLK (1196000000) -#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ get_board_sys_clk() #define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */ #define CONFIG_NFS_TIMEOUT 10000UL diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h index 146d8ad..046f188 100644 --- a/include/configs/lacie_kw.h +++ b/include/configs/lacie_kw.h @@ -6,35 +6,6 @@ #ifndef _CONFIG_LACIE_KW_H #define _CONFIG_LACIE_KW_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -/* SoC name */ -#if defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2) -#define CONFIG_KW88F6192 -#else -#define CONFIG_KW88F6281 -#endif - -/* - * SDRAM configuration - */ - -/* - * Different SDRAM configuration and size for some of the boards derived - * from the Network Space v2 - */ -#if defined(CONFIG_INETSPACE_V2) -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-is2.cfg -#elif defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2) -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-ns2l.cfg -#endif - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ #include "mv-common.h" /* Remove or override few declarations from mv-common.h */ @@ -70,7 +41,6 @@ /* * Enable GPI0 support */ -#define CONFIG_KIRKWOOD_GPIO /* * Enable I2C support @@ -97,9 +67,6 @@ /* * Default environment variables */ -#define CONFIG_BOOTCOMMAND \ - "dhcp && run netconsole; " \ - "if run usbload || run diskload; then bootm; fi" #define CONFIG_EXTRA_ENV_SETTINGS \ "stdin=serial\0" \ diff --git a/include/configs/lager.h b/include/configs/lager.h index c5001e3..4c291aa 100644 --- a/include/configs/lager.h +++ b/include/configs/lager.h @@ -31,8 +31,6 @@ #define CONFIG_BITBANGMII_MULTI /* Board Clock */ -#define RMOBILE_XTAL_CLK 20000000u -#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h index 6928179..b912db1 100644 --- a/include/configs/legoev3.h +++ b/include/configs/legoev3.h @@ -18,7 +18,6 @@ * SoC Configuration */ #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH -#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) @@ -61,32 +60,6 @@ #define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) #define CONFIG_HWCONFIG /* enable hwconfig */ #define CONFIG_SETUP_INITRD_TAG -#define CONFIG_BOOTCOMMAND \ - "if mmc rescan; then " \ - "if run loadbootscr; then " \ - "run bootscript; " \ - "else " \ - "if run loadbootenv; then " \ - "echo Loaded env from ${bootenvfile};" \ - "run importbootenv;" \ - "fi;" \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run loadimage; then " \ - "run mmcargs; " \ - "if run loadfdt; then " \ - "echo Using ${fdtfile}...;" \ - "run fdtfixup; " \ - "run fdtboot; "\ - "fi; " \ - "run mmcboot; " \ - "fi; " \ - "fi; " \ - "fi; "\ - "run flashargs; " \ - "run flashboot" #define CONFIG_EXTRA_ENV_SETTINGS \ "bootenvfile=uEnv.txt\0" \ "fdtfile=da850-lego-ev3.dtb\0" \ diff --git a/include/configs/liteboard.h b/include/configs/liteboard.h index d74b2bb..3a8dd47 100644 --- a/include/configs/liteboard.h +++ b/include/configs/liteboard.h @@ -23,8 +23,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR #endif -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ @@ -36,7 +34,7 @@ "boot_fdt=try\0" \ "ip_dyn=yes\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ @@ -87,19 +85,6 @@ "bootz; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev};" \ - "if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - /* Miscellaneous configurable options */ /* Physical Memory Map */ diff --git a/include/configs/ls1012a2g5rdb.h b/include/configs/ls1012a2g5rdb.h index 44f9da7..bda4283 100644 --- a/include/configs/ls1012a2g5rdb.h +++ b/include/configs/ls1012a2g5rdb.h @@ -14,8 +14,6 @@ #define CONFIG_SYS_SDRAM_SIZE 0x40000000 /* SATA */ -#define CONFIG_LIBATA -#define CONFIG_SCSI_AHCI #define CONFIG_SCSI_AHCI_PLAT #define CONFIG_SYS_SATA AHCI_BASE_ADDR @@ -74,16 +72,10 @@ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \ "bootm $load_addr#$board\0" -#undef CONFIG_BOOTCOMMAND #ifdef CONFIG_TFABOOT #undef QSPI_NOR_BOOTCOMMAND #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ "env exists secureboot && esbc_halt;" -#else -#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ - "env exists secureboot && esbc_halt;" -#endif #endif #define DEFAULT_PFE_MDIO_NAME "PFE_MDIO" diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h index 4e654ca..5d56100 100644 --- a/include/configs/ls1012a_common.h +++ b/include/configs/ls1012a_common.h @@ -10,8 +10,6 @@ #include <asm/arch/stream_id_lsch2.h> #include <linux/sizes.h> -#define CONFIG_SYS_CLK_FREQ 125000000 - #ifdef CONFIG_TFABOOT #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE #else @@ -45,11 +43,6 @@ /* I2C */ /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 @@ -78,15 +71,10 @@ "kernel_size=0x2800000\0" \ "bootm_size=0x10000000\0" \ -#undef CONFIG_BOOTCOMMAND #ifdef CONFIG_TFABOOT #define QSPI_NOR_BOOTCOMMAND "sf probe 0:0; sf read $kernel_load "\ "$kernel_start $kernel_size && "\ "bootm $kernel_load" -#else -#define CONFIG_BOOTCOMMAND "sf probe 0:0; sf read $kernel_load "\ - "$kernel_start $kernel_size && "\ - "bootm $kernel_load" #endif /* Monitor Command Prompt */ diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h index 2711f65..ef57cf6 100644 --- a/include/configs/ls1012afrdm.h +++ b/include/configs/ls1012afrdm.h @@ -54,12 +54,9 @@ "sf probe && sf read $load_addr " \ "$kernel_addr $kernel_size && bootm $load_addr#$board\0" -#undef CONFIG_BOOTCOMMAND #ifdef CONFIG_TFABOOT #undef QSPI_NOR_BOOTCOMMAND #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd" -#else -#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd" #endif #endif /* __LS1012ARDB_H__ */ diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h index f8b3861..c61865c 100644 --- a/include/configs/ls1012afrwy.h +++ b/include/configs/ls1012afrwy.h @@ -8,9 +8,6 @@ #include "ls1012a_common.h" -#undef CONFIG_SYS_BOARD -#define CONFIG_SYS_BOARD "ls1012afrwy" - /* Board Rev*/ #define BOARD_REV_A_B 0x0 #define BOARD_REV_C 0x00080000 @@ -92,14 +89,10 @@ " && esbc_validate ${kernelheader_addr_r};" \ "bootm $load_addr#$BOARD\0" -#undef CONFIG_BOOTCOMMAND #ifdef CONFIG_TFABOOT #undef QSPI_NOR_BOOTCOMMAND #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "\ "env exists secureboot && esbc_halt;" -#else -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "\ - "env exists secureboot && esbc_halt;" #endif #include <asm/fsl_secure_boot.h> diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h index a5900f2..cbcb3f7 100644 --- a/include/configs/ls1012aqds.h +++ b/include/configs/ls1012aqds.h @@ -75,19 +75,16 @@ DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \ DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \ DSPI_CTAR_DT(0)) -#define CONFIG_SPI_FLASH_SST /* cs1 */ #define CONFIG_SYS_DSPI_CTAR2 (DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\ DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \ DSPI_CTAR_CSSCK(0) | DSPI_CTAR_ASC(0) | \ DSPI_CTAR_DT(0)) -#define CONFIG_SPI_FLASH_STMICRO /* cs2 */ #define CONFIG_SYS_DSPI_CTAR3 (DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\ DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \ DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \ DSPI_CTAR_DT(0)) -#define CONFIG_SPI_FLASH_EON /* cs3 */ #define CONFIG_PCIE1 /* PCIE controller 1 */ @@ -138,14 +135,10 @@ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \ "bootm $load_addr#$board\0" -#undef CONFIG_BOOTCOMMAND #ifdef CONFIG_TFABOOT #undef QSPI_NOR_BOOTCOMMAND #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\ "env exists secureboot && esbc_halt;" -#else -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\ - "env exists secureboot && esbc_halt;" #endif #include <asm/fsl_secure_boot.h> diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h index c8a2f12..c9a152e 100644 --- a/include/configs/ls1012ardb.h +++ b/include/configs/ls1012ardb.h @@ -92,14 +92,10 @@ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \ "bootm $load_addr#$board\0" -#undef CONFIG_BOOTCOMMAND #ifdef CONFIG_TFABOOT #undef QSPI_NOR_BOOTCOMMAND #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\ "env exists secureboot && esbc_halt;" -#else -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "\ - "env exists secureboot && esbc_halt;" #endif #include <asm/fsl_secure_boot.h> diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h index 222caa1..7b4044f 100644 --- a/include/configs/ls1021aiot.h +++ b/include/configs/ls1021aiot.h @@ -9,13 +9,9 @@ #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR -#define CONFIG_SYS_FSL_CLK - #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE -#define CONFIG_SYS_CLK_FREQ 100000000 - /* * DDR: 800 MHz ( 1600 MT/s data rate ) */ @@ -48,8 +44,6 @@ #define SDRAM_CFG_BI 0x00000001 #ifdef CONFIG_SD_BOOT -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8 - #define CONFIG_SPL_MAX_SIZE 0x1a000 #define CONFIG_SPL_STACK 0x1001d000 #define CONFIG_SPL_PAD_TO 0x1c000 @@ -100,9 +94,6 @@ CONFIG_SYS_SCSI_MAX_LUN) /* SPI */ -#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_SPI_FLASH_SPANSION -#endif /* * eTSEC @@ -174,9 +165,6 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #endif -#define CONFIG_OF_BOARD_SETUP -#define CONFIG_OF_STDOUT_VIA_ALIAS - #include <asm/fsl_secure_boot.h> #endif diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 27b97ff..7edb5c6 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -9,22 +9,13 @@ #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR -#define CONFIG_SYS_FSL_CLK - #define CONFIG_DEEP_SLEEP #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_SYS_CLK_FREQ 100000000 #define CONFIG_QIXIS_I2C_ACCESS -#else -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() #endif #ifdef CONFIG_SD_BOOT @@ -76,7 +67,6 @@ unsigned long get_board_sys_clk(void); * IFC Definitions */ #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_FSL_IFC #define CONFIG_SYS_FLASH_BASE 0x60000000 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE @@ -298,11 +288,6 @@ unsigned long get_board_sys_clk(void); */ /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif /* EEPROM */ #define CONFIG_SYS_I2C_EEPROM_NXID @@ -323,7 +308,6 @@ unsigned long get_board_sys_clk(void); * Video */ #ifdef CONFIG_VIDEO_FSL_DCU_FB -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_FSL_DIU_CH7301 diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h index f70b6e9..5f6c2a0 100644 --- a/include/configs/ls1021atsn.h +++ b/include/configs/ls1021atsn.h @@ -8,8 +8,6 @@ #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR -#define CONFIG_SYS_FSL_CLK - #define CONFIG_DEEP_SLEEP #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR @@ -18,8 +16,6 @@ /* XHCI Support - enabled by default */ #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 -#define CONFIG_SYS_CLK_FREQ 100000000 - #define DDR_SDRAM_CFG 0x470c0008 #define DDR_CS0_BNDS 0x008000bf #define DDR_CS0_CONFIG 0x80014302 @@ -75,7 +71,6 @@ #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */ #endif -#define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM 0x80000000 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index c099629..d4c6f4f 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -9,15 +9,11 @@ #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR -#define CONFIG_SYS_FSL_CLK - #define CONFIG_DEEP_SLEEP #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE -#define CONFIG_SYS_CLK_FREQ 100000000 - #define DDR_SDRAM_CFG 0x470c0008 #define DDR_CS0_BNDS 0x008000bf #define DDR_CS0_CONFIG 0x80014302 @@ -89,7 +85,6 @@ * IFC Definitions */ #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_FSL_IFC #define CONFIG_SYS_FLASH_BASE 0x60000000 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE @@ -191,11 +186,6 @@ */ /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif /* EEPROM */ #define CONFIG_SYS_I2C_EEPROM_NXID @@ -209,7 +199,6 @@ * Video */ #ifdef CONFIG_VIDEO_FSL_DCU_FB -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_FSL_DCU_SII9022A @@ -378,18 +367,6 @@ "bootm $load_addr#$board\0" #endif -#undef CONFIG_BOOTCOMMAND -#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ - "env exists secureboot && esbc_halt" -#elif defined(CONFIG_SD_BOOT) -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; " \ - "env exists secureboot && esbc_halt;" -#else -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd;" \ - "env exists secureboot && esbc_halt;" -#endif - /* * Miscellaneous configurable options */ diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h index 1401264..f47bc73 100644 --- a/include/configs/ls1028a_common.h +++ b/include/configs/ls1028a_common.h @@ -7,7 +7,6 @@ #define __L1028A_COMMON_H #define CONFIG_REMAKE_ELF -#define CONFIG_MP #include <asm/arch/stream_id_lsch3.h> #include <asm/arch/config.h> @@ -32,11 +31,6 @@ #define COUNTER_FREQUENCY 25000000 /* 25MHz */ /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif /* I2C */ @@ -60,8 +54,6 @@ func(DHCP, dhcp, na) #include <config_distro_bootcmd.h> -#undef CONFIG_BOOTCOMMAND - #define XSPI_NOR_BOOTCOMMAND \ "run xspi_hdploadcmd; run distro_bootcmd; run xspi_bootcmd; " \ "env exists secureboot && esbc_halt;;" diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h index fe20363..8e3bd77 100644 --- a/include/configs/ls1028aqds.h +++ b/include/configs/ls1028aqds.h @@ -8,8 +8,7 @@ #include "ls1028a_common.h" -#define CONFIG_SYS_CLK_FREQ 100000000 -#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ / 4) +#define COUNTER_FREQUENCY_REAL (get_board_sys_clk() / 4) /* DDR */ #define CONFIG_DIMM_SLOTS_PER_CTLR 2 diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h index 348db1e..5ce9ebb 100644 --- a/include/configs/ls1028ardb.h +++ b/include/configs/ls1028ardb.h @@ -8,8 +8,7 @@ #include "ls1028a_common.h" -#define CONFIG_SYS_CLK_FREQ 100000000 -#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ / 4) +#define COUNTER_FREQUENCY_REAL (get_board_sys_clk() / 4) #define CONFIG_SYS_RTC_BUS_NUM 0 diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index bdf1b43..3b4f822 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -112,17 +112,11 @@ #endif /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif /* IFC */ #ifndef SPL_NO_IFC #if defined(CONFIG_TFABOOT) || \ (!defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)) -#define CONFIG_FSL_IFC /* * CONFIG_SYS_FLASH_BASE has the final address (core view) * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view) @@ -154,13 +148,6 @@ #endif /* DSPI */ -#ifndef SPL_NO_DSPI -#ifdef CONFIG_FSL_DSPI -#define CONFIG_SPI_FLASH_STMICRO /* cs0 */ -#define CONFIG_SPI_FLASH_SST /* cs1 */ -#define CONFIG_SPI_FLASH_EON /* cs2 */ -#endif -#endif /* FMan ucode */ #ifndef SPL_NO_FMAN @@ -261,7 +248,6 @@ "bootm $load_addr#$board\0" -#undef CONFIG_BOOTCOMMAND #ifdef CONFIG_TFABOOT #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ "env exists secureboot && esbc_halt;" @@ -271,17 +257,6 @@ "env exists secureboot && esbc_halt;" #define IFC_NAND_BOOTCOMMAND "run distro_bootcmd; run nand_bootcmd; " \ "env exists secureboot && esbc_halt;" -#else -#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ - "env exists secureboot && esbc_halt;" -#elif defined(CONFIG_SD_BOOT) -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; " \ - "env exists secureboot && esbc_halt;" -#else -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; " \ - "env exists secureboot && esbc_halt;" -#endif #endif #endif diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h index ee56605..80eff7b 100644 --- a/include/configs/ls1043aqds.h +++ b/include/configs/ls1043aqds.h @@ -8,12 +8,6 @@ #include "ls1043a_common.h" -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() - #define CONFIG_LAYERSCAPE_NS_ACCESS #define CONFIG_DIMM_SLOTS_PER_CTLR 1 @@ -330,12 +324,6 @@ unsigned long get_board_sys_clk(void); #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 -#define CONFIG_VID_FLS_ENV "ls1043aqds_vdd_mv" -#ifndef CONFIG_SPL_BUILD -#define CONFIG_VID -#endif -#define CONFIG_VOL_MONITOR_IR36021_SET -#define CONFIG_VOL_MONITOR_INA220 /* The lowest and highest voltage allowed for LS1043AQDS */ #define VDD_MV_MIN 819 #define VDD_MV_MAX 1212 diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index 0d071c4..7b6d193 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -8,8 +8,6 @@ #include "ls1043a_common.h" -#define CONFIG_SYS_CLK_FREQ 100000000 - #define CONFIG_LAYERSCAPE_NS_ACCESS #define CONFIG_DIMM_SLOTS_PER_CTLR 1 diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index 515f420..d07d27d 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -110,11 +110,6 @@ #endif /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif /* I2C */ diff --git a/include/configs/ls1046afrwy.h b/include/configs/ls1046afrwy.h index 5b78c5f..14ad84a 100644 --- a/include/configs/ls1046afrwy.h +++ b/include/configs/ls1046afrwy.h @@ -8,8 +8,6 @@ #include "ls1046a_common.h" -#define CONFIG_SYS_CLK_FREQ 100000000 - #define CONFIG_LAYERSCAPE_NS_ACCESS #define CONFIG_DIMM_SLOTS_PER_CTLR 1 @@ -17,8 +15,6 @@ #define CONFIG_SYS_UBOOT_BASE 0x40100000 -/* IFC */ -#define CONFIG_FSL_IFC /* * NAND Flash Definitions */ @@ -109,7 +105,6 @@ #endif -#undef CONFIG_BOOTCOMMAND #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ "env exists secureboot && esbc_halt;;" #define SD_BOOTCOMMAND "run distro_bootcmd;run sd_bootcmd; " \ diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h index 8bc09d0..97bf418 100644 --- a/include/configs/ls1046aqds.h +++ b/include/configs/ls1046aqds.h @@ -8,12 +8,6 @@ #include "ls1046a_common.h" -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() - #define CONFIG_LAYERSCAPE_NS_ACCESS #define CONFIG_DIMM_SLOTS_PER_CTLR 1 @@ -43,7 +37,6 @@ unsigned long get_board_sys_clk(void); /* IFC */ #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_FSL_IFC /* * CONFIG_SYS_FLASH_BASE has the final address (core view) * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view) @@ -339,12 +332,6 @@ unsigned long get_board_sys_clk(void); #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 -#define CONFIG_VID_FLS_ENV "ls1046aqds_vdd_mv" -#ifndef CONFIG_SPL_BUILD -#define CONFIG_VID -#endif -#define CONFIG_VOL_MONITOR_IR36021_SET -#define CONFIG_VOL_MONITOR_INA220 /* The lowest and highest voltage allowed for LS1046AQDS */ #define VDD_MV_MIN 819 #define VDD_MV_MAX 1212 @@ -362,7 +349,6 @@ unsigned long get_board_sys_clk(void); * Environment */ -#undef CONFIG_BOOTCOMMAND #ifdef CONFIG_TFABOOT #define IFC_NAND_BOOTCOMMAND "run distro_bootcmd; run nand_bootcmd; " \ "env exists secureboot && esbc_halt;;" @@ -372,20 +358,6 @@ unsigned long get_board_sys_clk(void); "env exists secureboot && esbc_halt;;" #define SD_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; " \ "env exists secureboot && esbc_halt;;" -#else -#if defined(CONFIG_QSPI_BOOT) -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; " \ - "env exists secureboot && esbc_halt;;" -#elif defined(CONFIG_NAND_BOOT) -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nand_bootcmd; " \ - "env exists secureboot && esbc_halt;;" -#elif defined(CONFIG_SD_BOOT) -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; " \ - "env exists secureboot && esbc_halt;;" -#else -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; " \ - "env exists secureboot && esbc_halt;;" -#endif #endif #include <asm/fsl_secure_boot.h> diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h index d06f338..8ed1dce 100644 --- a/include/configs/ls1046ardb.h +++ b/include/configs/ls1046ardb.h @@ -9,8 +9,6 @@ #include "ls1046a_common.h" -#define CONFIG_SYS_CLK_FREQ 100000000 - #define CONFIG_LAYERSCAPE_NS_ACCESS #define CONFIG_DIMM_SLOTS_PER_CTLR 1 @@ -27,14 +25,6 @@ #define CONFIG_SYS_SPL_ARGS_ADDR 0x90000000 #endif -#ifndef SPL_NO_IFC -/* IFC */ -#define CONFIG_FSL_IFC -/* - * NAND Flash Definitions - */ -#endif - #define CONFIG_SYS_NAND_BASE 0x7e800000 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE @@ -145,20 +135,11 @@ #endif #ifndef SPL_NO_MISC -#undef CONFIG_BOOTCOMMAND #ifdef CONFIG_TFABOOT #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ "env exists secureboot && esbc_halt;;" #define SD_BOOTCOMMAND "run distro_bootcmd;run sd_bootcmd; " \ "env exists secureboot && esbc_halt;" -#else -#if defined(CONFIG_QSPI_BOOT) -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ - "env exists secureboot && esbc_halt;;" -#elif defined(CONFIG_SD_BOOT) -#define CONFIG_BOOTCOMMAND "run distro_bootcmd;run sd_bootcmd; " \ - "env exists secureboot && esbc_halt;" -#endif #endif #endif diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index c816ee1..2e52108 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -49,11 +49,6 @@ #define CPU_RELEASE_ADDR secondary_boot_addr /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif /* I2C */ @@ -63,11 +58,6 @@ #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2) -#if !defined(SPL_NO_IFC) || defined(CONFIG_TARGET_LS1088AQDS) -/* IFC */ -#define CONFIG_FSL_IFC -#endif - /* * During booting, IFC is mapped at the region of 0x30000000. * But this region is limited to 256MB. To accommodate NOR, promjet @@ -173,25 +163,6 @@ unsigned long long get_qixis_addr(void); "console=ttyAMA0,38400n8\0" \ "mcinitcmd=fsl_mc start mc 0x580a00000" \ " 0x580e00000 \0" - -#ifndef CONFIG_TFABOOT -#if defined(CONFIG_QSPI_BOOT) -#define CONFIG_BOOTCOMMAND "sf probe 0:0;" \ - "sf read 0x80001000 0xd00000 0x100000;"\ - " fsl_mc lazyapply dpl 0x80001000 &&" \ - " sf read $kernel_load $kernel_start" \ - " $kernel_size && bootm $kernel_load" -#elif defined(CONFIG_SD_BOOT) -#define CONFIG_BOOTCOMMAND "mmcinfo;mmc read 0x80001000 0x6800 0x800;"\ - " fsl_mc lazyapply dpl 0x80001000 &&" \ - " mmc read $kernel_load $kernel_start" \ - " $kernel_size && bootm $kernel_load" -#else /* NOR BOOT*/ -#define CONFIG_BOOTCOMMAND "fsl_mc lazyapply dpl 0x580d00000 &&" \ - " cp.b $kernel_start $kernel_load" \ - " $kernel_size && bootm $kernel_load" -#endif -#endif /* CONFIG_TFABOOT */ #endif /* Monitor Command Prompt */ diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h index d001acf..5912fe9 100644 --- a/include/configs/ls1088aqds.h +++ b/include/configs/ls1088aqds.h @@ -8,22 +8,14 @@ #include "ls1088a_common.h" - -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) #define CONFIG_QIXIS_I2C_ACCESS #define SYS_NO_FLASH - -#define CONFIG_SYS_CLK_FREQ 100000000 #else #define CONFIG_QIXIS_I2C_ACCESS -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() #endif -#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ/4) +#define COUNTER_FREQUENCY_REAL (get_board_sys_clk()/4) #define COUNTER_FREQUENCY 25000000 /* 25MHz */ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 @@ -298,16 +290,10 @@ unsigned long get_board_sys_clk(void); #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 #define I2C_SVDD_MONITOR_ADDR 0x4F -#define CONFIG_VID_FLS_ENV "ls1088aqds_vdd_mv" -#define CONFIG_VID - /* The lowest and highest voltage allowed for LS1088AQDS */ #define VDD_MV_MIN 819 #define VDD_MV_MAX 1212 -#define CONFIG_VOL_MONITOR_LTC3882_SET -#define CONFIG_VOL_MONITOR_LTC3882_READ - #define PWM_CHANNEL0 0x0 /* @@ -321,9 +307,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_SYS_EEPROM_BUS_NUM 0 #ifdef CONFIG_FSL_DSPI -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_SPI_FLASH_SST -#define CONFIG_SPI_FLASH_EON #if !defined(CONFIG_TFABOOT) && \ !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) #endif diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index 6ad1fea..400b8ad 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -16,7 +16,6 @@ #define SYS_NO_FLASH #endif -#define CONFIG_SYS_CLK_FREQ 100000000 #define COUNTER_FREQUENCY_REAL 25000000 /* 25MHz */ #define COUNTER_FREQUENCY 25000000 /* 25MHz */ @@ -197,16 +196,10 @@ #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 #define I2C_SVDD_MONITOR_ADDR 0x4F -#define CONFIG_VID_FLS_ENV "ls1088ardb_vdd_mv" -#define CONFIG_VID - /* The lowest and highest voltage allowed for LS1088ARDB */ #define VDD_MV_MIN 819 #define VDD_MV_MAX 1212 -#define CONFIG_VOL_MONITOR_LTC3882_SET -#define CONFIG_VOL_MONITOR_LTC3882_READ - #define PWM_CHANNEL0 0x0 /* @@ -424,7 +417,6 @@ "bootm $load_addr#$BOARD\0" #endif /* CONFIG_TFABOOT */ -#undef CONFIG_BOOTCOMMAND #ifdef CONFIG_TFABOOT #define QSPI_NOR_BOOTCOMMAND \ "sf read 0x80001000 0xd00000 0x100000;" \ @@ -446,26 +438,8 @@ #else #if defined(CONFIG_QSPI_BOOT) /* Try to boot an on-QSPI kernel first, then do normal distro boot */ -#define CONFIG_BOOTCOMMAND \ - "sf read 0x80001000 0xd00000 0x100000;" \ - "env exists mcinitcmd && env exists secureboot " \ - " && sf read 0x806C0000 0x6C0000 0x100000 " \ - "&& esbc_validate 0x806C0000;env exists mcinitcmd " \ - "&& fsl_mc lazyapply dpl 0x80001000;" \ - "run distro_bootcmd;run qspi_bootcmd;" \ - "env exists secureboot && esbc_halt;" /* Try to boot an on-SD kernel first, then do normal distro boot */ -#elif defined(CONFIG_SD_BOOT) -#define CONFIG_BOOTCOMMAND \ - "env exists mcinitcmd && mmcinfo; " \ - "mmc read 0x80001000 0x6800 0x800; " \ - "env exists mcinitcmd && env exists secureboot " \ - " && mmc read 0x806C0000 0x3600 0x20 " \ - "&& esbc_validate 0x806C0000;env exists mcinitcmd " \ - "&& fsl_mc lazyapply dpl 0x80001000;" \ - "run distro_bootcmd;run sd_bootcmd;" \ - "env exists secureboot && esbc_halt;" #endif #endif /* CONFIG_TFABOOT */ diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index 6d9ae9d..eea6ce5 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -61,11 +61,6 @@ #define COUNTER_FREQUENCY 25000000 /* 25MHz */ /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif /* I2C */ @@ -74,9 +69,6 @@ #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK (get_serial_clock()) -/* IFC */ -#define CONFIG_FSL_IFC - /* * During booting, IFC is mapped at the region of 0x30000000. * But this region is limited to 256MB. To accommodate NOR, promjet @@ -170,19 +162,6 @@ unsigned long long get_qixis_addr(void); "mcinitcmd=fsl_mc start mc 0x580a00000" \ " 0x580e00000 \0" -#ifndef CONFIG_TFABOOT -#ifdef CONFIG_SD_BOOT -#define CONFIG_BOOTCOMMAND "mmc read 0x80200000 0x6800 0x800;"\ - " fsl_mc apply dpl 0x80200000 &&" \ - " mmc read $kernel_load $kernel_start" \ - " $kernel_size && bootm $kernel_load" -#else -#define CONFIG_BOOTCOMMAND "fsl_mc apply dpl 0x580d00000 &&" \ - " cp.b $kernel_start $kernel_load" \ - " $kernel_size && bootm $kernel_load" -#endif -#endif - /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ #define CONFIG_SYS_MAXARGS 64 /* max command args */ diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index e67dee0..b0a05dd 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -9,18 +9,13 @@ #include "ls2080a_common.h" -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - #ifdef CONFIG_FSL_QSPI #define CONFIG_QIXIS_I2C_ACCESS #define CONFIG_SYS_I2C_IFDR_DIV 0x7e #endif #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() -#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ/4) +#define COUNTER_FREQUENCY_REAL (get_board_sys_clk()/4) #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #define SPD_EEPROM_ADDRESS1 0x51 @@ -256,15 +251,7 @@ unsigned long get_board_sys_clk(void); #define I2C_MUX_CH_DEFAULT 0x8 /* SPI */ -#ifdef CONFIG_FSL_DSPI -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_SPI_FLASH_SST -#define CONFIG_SPI_FLASH_EON -#endif -#ifdef CONFIG_FSL_QSPI -#define CONFIG_SPI_FLASH_SPANSION -#endif /* * Verify QSPI when boot from NAND, QIXIS brdcfg9 need configure. * If boot from on-board NAND, ISO1 = 1, ISO2 = 0, IBOOT = 0 @@ -285,9 +272,7 @@ unsigned long get_board_sys_clk(void); */ #define RTC #define CONFIG_RTC_DS3231 1 -#define CONFIG_RTC_ENABLE_32KHZ_OUTPUT #define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#define CONFIG_RTC_ENABLE_32KHZ_OUTPUT /* EEPROM */ #define CONFIG_SYS_I2C_EEPROM_NXID diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 54fab54..a54387e 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -17,13 +17,7 @@ #define I2C_MUX_CH_VOL_MONITOR 0xa #define I2C_VOL_MONITOR_ADDR 0x38 -#define CONFIG_VOL_MONITOR_IR36021_READ -#define CONFIG_VOL_MONITOR_IR36021_SET -#define CONFIG_VID_FLS_ENV "ls2080ardb_vdd_mv" -#ifndef CONFIG_SPL_BUILD -#define CONFIG_VID -#endif /* step the IR regulator in 5mV increments */ #define IR_VDD_STEP_DOWN 5 #define IR_VDD_STEP_UP 5 @@ -31,12 +25,7 @@ #define VDD_MV_MIN 819 #define VDD_MV_MAX 1212 -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() -#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ/4) +#define COUNTER_FREQUENCY_REAL (get_board_sys_clk()/4) #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #define SPD_EEPROM_ADDRESS1 0x51 @@ -258,9 +247,6 @@ unsigned long get_board_sys_clk(void); #define I2C_MUX_CH_DEFAULT 0x8 /* SPI */ -#if defined(CONFIG_FSL_DSPI) -#define CONFIG_SPI_FLASH_STMICRO -#endif /* * RTC configuration @@ -507,38 +493,12 @@ unsigned long get_board_sys_clk(void); "run distro_bootcmd;run nor_bootcmd; " \ "env exists secureboot && esbc_halt;" #else -#undef CONFIG_BOOTCOMMAND #ifdef CONFIG_QSPI_BOOT /* Try to boot an on-QSPI kernel first, then do normal distro boot */ -#define CONFIG_BOOTCOMMAND \ - "sf probe 0:0; " \ - "sf read 0x806c0000 0x6c0000 0x40000; " \ - "env exists mcinitcmd && env exists secureboot "\ - "&& esbc_validate 0x806C0000; " \ - "sf read 0x80d00000 0xd00000 0x100000; " \ - "env exists mcinitcmd && " \ - "fsl_mc lazyapply dpl 0x80d00000; " \ - "run distro_bootcmd;run qspi_bootcmd; " \ - "env exists secureboot && esbc_halt;" #elif defined(CONFIG_SD_BOOT) /* Try to boot an on-SD kernel first, then do normal distro boot */ -#define CONFIG_BOOTCOMMAND \ - "env exists mcinitcmd && env exists secureboot "\ - "&& mmcinfo && mmc read $load_addr 0x3600 0x800 " \ - "&& esbc_validate $load_addr; " \ - "env exists mcinitcmd && run mcinitcmd " \ - "&& mmc read 0x88000000 0x6800 0x800 " \ - "&& fsl_mc lazyapply dpl 0x88000000; " \ - "run distro_bootcmd;run sd_bootcmd; " \ - "env exists secureboot && esbc_halt;" #else /* Try to boot an on-NOR kernel first, then do normal distro boot */ -#define CONFIG_BOOTCOMMAND \ - "env exists mcinitcmd && env exists secureboot "\ - "&& esbc_validate 0x5806C0000; env exists mcinitcmd "\ - "&& fsl_mc lazyapply dpl 0x580d00000;" \ - "run distro_bootcmd;run nor_bootcmd; " \ - "env exists secureboot && esbc_halt;" #endif #endif diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index 7294a3c..afa0206 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -8,23 +8,8 @@ #define _CONFIG_LSXL_H /* - * Version number information - */ -#if defined(CONFIG_LSCHLV2) -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg -#elif defined(CONFIG_LSXHL) -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg -#else -#error "unknown board" -#endif - -/* * General configuration options */ -#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -#define CONFIG_KW88F6281 /* SOC Name */ - -#define CONFIG_KIRKWOOD_GPIO #include "mv-common.h" diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h index 7173fe6..e285109 100644 --- a/include/configs/lx2160a_common.h +++ b/include/configs/lx2160a_common.h @@ -11,14 +11,12 @@ #include <asm/arch/soc.h> #define CONFIG_REMAKE_ELF -#define CONFIG_FSL_TZPC_BP147 #define CONFIG_FSL_MEMAC #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_FLASH_BASE 0x20000000 /* DDR */ -#define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */ #define CONFIG_SYS_FSL_DDR_INTLV_256B /* force 256 byte interleaving */ #define CONFIG_VERY_BIG_RAM #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL @@ -38,7 +36,6 @@ #define CONFIG_SYS_SPD_BUS_NUM 0 /* SPD on I2C bus 0 */ #define CONFIG_DIMM_SLOTS_PER_CTLR 2 #define CONFIG_CHIP_SELECTS_PER_CTRL 4 -#define CONFIG_FSL_DDR_BIST /* enable built-in memory test */ #define CONFIG_SYS_MONITOR_LEN (936 * 1024) /* Miscellaneous configurable options */ @@ -107,7 +104,6 @@ /* PCI */ #ifdef CONFIG_PCI -#define CONFIG_SYS_PCI_64BIT #define CONFIG_PCI_SCAN_SHOW #endif @@ -130,19 +126,7 @@ #endif #endif -/* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif - -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() -#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ / 4) +#define COUNTER_FREQUENCY_REAL (get_board_sys_clk() / 4) #define CONFIG_HWCONFIG #define HWCONFIG_BUFFER_SIZE 128 diff --git a/include/configs/lx2160aqds.h b/include/configs/lx2160aqds.h index a04bbb6..a07ebeb 100644 --- a/include/configs/lx2160aqds.h +++ b/include/configs/lx2160aqds.h @@ -8,12 +8,6 @@ #include "lx2160a_common.h" -/* VID */ -#define CONFIG_VID_FLS_ENV "lx2160aqds_vdd_mv" -#define CONFIG_VID -#define CONFIG_VOL_MONITOR_LTC3882_SET -#define CONFIG_VOL_MONITOR_LTC3882_READ - /* RTC */ #define CONFIG_SYS_RTC_BUS_NUM 0 diff --git a/include/configs/lx2160ardb.h b/include/configs/lx2160ardb.h index 4fd3e54..a8a9f82 100644 --- a/include/configs/lx2160ardb.h +++ b/include/configs/lx2160ardb.h @@ -8,12 +8,6 @@ #include "lx2160a_common.h" -/* VID */ -#define CONFIG_VID_FLS_ENV "lx2160ardb_vdd_mv" -#define CONFIG_VID -#define CONFIG_VOL_MONITOR_LTC3882_SET -#define CONFIG_VOL_MONITOR_LTC3882_READ - /* RTC */ #define CONFIG_SYS_RTC_BUS_NUM 4 diff --git a/include/configs/lx2162aqds.h b/include/configs/lx2162aqds.h index 67c469c..c2fa579 100644 --- a/include/configs/lx2162aqds.h +++ b/include/configs/lx2162aqds.h @@ -12,12 +12,6 @@ #undef CONFIG_USB_MAX_CONTROLLER_COUNT #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 -/* Voltage monitor on channel 2*/ -#define CONFIG_VID_FLS_ENV "lx2162aqds_vdd_mv" -#define CONFIG_VID -#define CONFIG_VOL_MONITOR_LTC3882_SET -#define CONFIG_VOL_MONITOR_LTC3882_READ - /* RTC */ #define CONFIG_SYS_RTC_BUS_NUM 0 diff --git a/include/configs/m53menlo.h b/include/configs/m53menlo.h index f94cf28..6eb5ec9 100644 --- a/include/configs/m53menlo.h +++ b/include/configs/m53menlo.h @@ -11,8 +11,6 @@ #include <asm/arch/imx-regs.h> -#define CONFIG_SYS_FSL_CLK - #define CONFIG_TIMESTAMP /* Print image info with timestamp */ /* @@ -112,7 +110,6 @@ /* * LCD */ -#define CONFIG_VIDEO_LOGO #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) /* LVDS display */ @@ -128,7 +125,6 @@ * Boot Linux */ #define CONFIG_BOOTFILE "boot/fitImage" -#define CONFIG_BOOTCOMMAND "run mmc_mmc" /* * NAND SPL @@ -205,9 +201,4 @@ "fi ; " \ "fi\0" -#if defined(CONFIG_SPL_BUILD) -#undef CONFIG_WATCHDOG -#define CONFIG_HW_WATCHDOG -#endif - #endif /* __M53MENLO_CONFIG_H__ */ diff --git a/include/configs/medcom-wide.h b/include/configs/medcom-wide.h index 84b998e..b35ba59 100644 --- a/include/configs/medcom-wide.h +++ b/include/configs/medcom-wide.h @@ -19,7 +19,6 @@ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE /* NAND support */ -#define CONFIG_TEGRA_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Environment in NAND, aligned to start of last sector */ diff --git a/include/configs/meson64.h b/include/configs/meson64.h index cb202d5..44f2967 100644 --- a/include/configs/meson64.h +++ b/include/configs/meson64.h @@ -29,7 +29,6 @@ #define STDIN_CFG "serial" #endif -#define CONFIG_CPU_ARMV8 #define CONFIG_REMAKE_ELF #define CONFIG_SYS_MAXARGS 32 #define CONFIG_SYS_CBSIZE 1024 diff --git a/include/configs/mt8183.h b/include/configs/mt8183.h index ebd2b32..2b4e976 100644 --- a/include/configs/mt8183.h +++ b/include/configs/mt8183.h @@ -11,7 +11,6 @@ #include <linux/sizes.h> -#define CONFIG_CPU_ARMV8 #define COUNTER_FREQUENCY 13000000 #define CONFIG_SYS_NS16550_SERIAL diff --git a/include/configs/mt8512.h b/include/configs/mt8512.h index 8882a5a..9c443db 100644 --- a/include/configs/mt8512.h +++ b/include/configs/mt8512.h @@ -13,8 +13,6 @@ #define CONFIG_SYS_NONCACHED_MEMORY SZ_1M -#define CONFIG_CPU_ARMV8 - #define COUNTER_FREQUENCY 13000000 #define CONFIG_SYS_BOOTM_LEN SZ_64M diff --git a/include/configs/mt8516.h b/include/configs/mt8516.h index 12840b8..47132c1 100644 --- a/include/configs/mt8516.h +++ b/include/configs/mt8516.h @@ -11,7 +11,6 @@ #include <linux/sizes.h> -#define CONFIG_CPU_ARMV8 #define COUNTER_FREQUENCY 13000000 #define CONFIG_SYS_NS16550_SERIAL diff --git a/include/configs/mt8518.h b/include/configs/mt8518.h index 593c6a1..49ee926 100644 --- a/include/configs/mt8518.h +++ b/include/configs/mt8518.h @@ -13,8 +13,6 @@ #define CONFIG_SYS_NONCACHED_MEMORY SZ_1M -#define CONFIG_CPU_ARMV8 - #define COUNTER_FREQUENCY 13000000 /* DRAM definition */ diff --git a/include/configs/mv-plug-common.h b/include/configs/mv-plug-common.h deleted file mode 100644 index d38d987..0000000 --- a/include/configs/mv-plug-common.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2009-2015 - * Marvell Semiconductor <www.marvell.com> - */ - -#ifndef _CONFIG_MARVELL_PLUG_H -#define _CONFIG_MARVELL_PLUG_H - -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_KW88F6281 1 /* SOC Name */ - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#include "mv-common.h" - -#endif /* _CONFIG_MARVELL_PLUG_H */ diff --git a/include/configs/mx23_olinuxino.h b/include/configs/mx23_olinuxino.h index b0c78d3..370f000 100644 --- a/include/configs/mx23_olinuxino.h +++ b/include/configs/mx23_olinuxino.h @@ -95,18 +95,6 @@ "bootm; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - /* The rest of the configuration is shared */ #include <configs/mxs.h> diff --git a/include/configs/mx23evk.h b/include/configs/mx23evk.h index bccba5c..552bf5a 100644 --- a/include/configs/mx23evk.h +++ b/include/configs/mx23evk.h @@ -27,7 +27,6 @@ /* Framebuffer support */ #ifdef CONFIG_DM_VIDEO -#define CONFIG_VIDEO_LOGO #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (512 << 10) #endif @@ -78,19 +77,6 @@ "bootz; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else " \ - "echo ERR: Fail to boot from MMC; " \ - "fi; " \ - "fi; " \ - "else exit; fi" - /* The rest of the configuration is shared */ #include <configs/mxs.h> diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index fe4ea89..caad95b 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -41,7 +41,6 @@ /* Framebuffer support */ #ifdef CONFIG_DM_VIDEO -#define CONFIG_VIDEO_LOGO #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (512 << 10) #endif @@ -196,18 +195,6 @@ "bootz; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - /* The rest of the configuration is shared */ #include <configs/mxs.h> diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index 9cc297d..dc5891e 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -12,8 +12,6 @@ /* High Level Configuration Options */ -#define CONFIG_SYS_FSL_CLK - #include <asm/arch/imx-regs.h> /* @@ -45,7 +43,6 @@ #define CONFIG_MXC_USB_FLAGS MXC_EHCI_POWER_PINS_ENABLED /* Framebuffer and LCD */ -#define CONFIG_VIDEO_LOGO #define CONFIG_ETHPRIME "FEC0" @@ -108,18 +105,6 @@ "bootz; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - #define CONFIG_ARP_TIMEOUT 200UL /* diff --git a/include/configs/mx53cx9020.h b/include/configs/mx53cx9020.h index f03e425..16c2241 100644 --- a/include/configs/mx53cx9020.h +++ b/include/configs/mx53cx9020.h @@ -14,8 +14,6 @@ #include <asm/arch/imx-regs.h> -#define CONFIG_SYS_FSL_CLK - #define CONFIG_MXC_UART_BASE UART2_BASE #define CONFIG_FPGA_COUNT 1 diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index b026c6f..92140df 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -11,8 +11,6 @@ #include <asm/arch/imx-regs.h> -#define CONFIG_SYS_FSL_CLK - #define CONFIG_MXC_UART_BASE UART1_BASE /* MMC Configs */ @@ -93,18 +91,6 @@ "bootz; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - #define CONFIG_ARP_TIMEOUT 200UL /* Miscellaneous configurable options */ @@ -146,6 +132,5 @@ #endif /* Framebuffer and LCD */ -#define CONFIG_VIDEO_LOGO #endif /* __CONFIG_H */ diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h index f811881..8f8dfe9 100644 --- a/include/configs/mx53ppd.h +++ b/include/configs/mx53ppd.h @@ -11,8 +11,6 @@ #include <asm/arch/imx-regs.h> -#define CONFIG_SYS_FSL_CLK - /* USB Configs */ #define CONFIG_MXC_USB_PORT 1 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) @@ -87,12 +85,6 @@ "video-mode=" \ "lcd:800x480-24@60,monitor=lcd\0" \ -#define MMCBOOTCOMMAND \ - "run doquiet; " \ - "run tryboot; " \ - -#define CONFIG_BOOTCOMMAND MMCBOOTCOMMAND - #define CONFIG_ARP_TIMEOUT 200UL /* Miscellaneous configurable options */ diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index 0ae8305..5ff931e 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -27,8 +27,6 @@ #include <asm/arch/imx-regs.h> #include <asm/mach-imx/gpio.h> -#define CONFIG_SYS_FSL_CLK - /* Miscellaneous configurable options */ #define CONFIG_SYS_CBSIZE 512 #define CONFIG_SYS_MAXARGS 32 diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h index da25336..7d3e651 100644 --- a/include/configs/mx6cuboxi.h +++ b/include/configs/mx6cuboxi.h @@ -25,7 +25,6 @@ #endif /* Framebuffer */ -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index 51f6b3a..c1c012b 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -136,20 +136,6 @@ "echo WARNING: Could not determine dtb to use; fi; " \ "fi;\0" \ -#define CONFIG_BOOTCOMMAND \ - "run findfdt;" \ - "mmc dev ${mmcdev};" \ - "if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - #define CONFIG_ARP_TIMEOUT 200UL /* Physical Memory Map */ @@ -167,7 +153,6 @@ /* Environment organization */ /* Framebuffer */ -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index e8fd212..3da796d 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -81,19 +81,6 @@ "bootz; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev};" \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - /* Miscellaneous configurable options */ /* Physical Memory Map */ diff --git a/include/configs/mx6sllevk.h b/include/configs/mx6sllevk.h index f2bddd1..0793028 100644 --- a/include/configs/mx6sllevk.h +++ b/include/configs/mx6sllevk.h @@ -76,19 +76,6 @@ "bootz; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev};" \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - /* Miscellaneous configurable options */ /* Physical Memory Map */ diff --git a/include/configs/mx6sxsabreauto.h b/include/configs/mx6sxsabreauto.h index 12b1783..953f071 100644 --- a/include/configs/mx6sxsabreauto.h +++ b/include/configs/mx6sxsabreauto.h @@ -73,19 +73,6 @@ "bootz; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev};" \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - /* Miscellaneous configurable options */ /* Physical Memory Map */ diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index a554011..8bc8674 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -107,19 +107,6 @@ "if test test $board_rev = REVA ; then " \ "setenv fdt_file imx6sx-sdb-reva.dtb; fi; " \ -#define CONFIG_BOOTCOMMAND \ - "run findfdt; " \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - /* Miscellaneous configurable options */ /* Physical Memory Map */ @@ -161,7 +148,6 @@ #ifndef CONFIG_SPL_BUILD #ifdef CONFIG_DM_VIDEO -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define MXS_LCDIF_BASE MX6SX_LCDIF1_BASE_ADDR #endif diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h index 0b777fb..c24578a 100644 --- a/include/configs/mx6ul_14x14_evk.h +++ b/include/configs/mx6ul_14x14_evk.h @@ -33,8 +33,6 @@ #endif -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ @@ -48,7 +46,7 @@ "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ @@ -108,20 +106,6 @@ "echo WARNING: Could not determine dtb to use; fi; " \ "fi;\0" \ -#define CONFIG_BOOTCOMMAND \ - "run findfdt;" \ - "mmc dev ${mmcdev};" \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - /* Miscellaneous configurable options */ /* Physical Memory Map */ @@ -165,7 +149,6 @@ #ifndef CONFIG_SPL_BUILD #if defined(CONFIG_DM_VIDEO) -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR #endif diff --git a/include/configs/mx6ullevk.h b/include/configs/mx6ullevk.h index e384d2a..6bcca11 100644 --- a/include/configs/mx6ullevk.h +++ b/include/configs/mx6ullevk.h @@ -30,8 +30,6 @@ #endif #endif -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ @@ -44,7 +42,7 @@ "ip_dyn=yes\0" \ "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ @@ -105,20 +103,6 @@ "bootz; " \ "fi;\0" \ -#define CONFIG_BOOTCOMMAND \ - "run findfdt;" \ - "mmc dev ${mmcdev};" \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - /* Miscellaneous configurable options */ /* Physical Memory Map */ @@ -138,8 +122,6 @@ #define CONFIG_IOMUX_LPSR -#define CONFIG_SOFT_SPI - #ifdef CONFIG_CMD_NET #define CONFIG_FEC_ENET_DEV 1 #if (CONFIG_FEC_ENET_DEV == 0) diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h index ffe8c75..2e976df 100644 --- a/include/configs/mx7_common.h +++ b/include/configs/mx7_common.h @@ -17,7 +17,6 @@ #define CONFIG_MXC_GPT_HCLK #define CONFIG_SC_TIMER_CLK 8000000 /* 8Mhz */ #define COUNTER_FREQUENCY CONFIG_SC_TIMER_CLK -#define CONFIG_SYS_FSL_CLK #define CONFIG_SYS_BOOTM_LEN 0x1000000 diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h index f11e2e3..d5b38fd 100644 --- a/include/configs/mx7dsabresd.h +++ b/include/configs/mx7dsabresd.h @@ -17,8 +17,6 @@ /* MMC Config*/ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #ifdef CONFIG_IMX_BOOTAUX /* Set to QSPI1 A flash at default */ #define CONFIG_SYS_AUXCORE_BOOTDATA 0x60000000 @@ -125,7 +123,6 @@ #define CONFIG_USBD_HS #ifdef CONFIG_DM_VIDEO -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #endif diff --git a/include/configs/mx7ulp_com.h b/include/configs/mx7ulp_com.h index 58d48ed..8c4d942 100644 --- a/include/configs/mx7ulp_com.h +++ b/include/configs/mx7ulp_com.h @@ -25,7 +25,6 @@ */ #define CONFIG_BOARD_SIZE_LIMIT 785408 #define CONFIG_MMCROOT "/dev/mmcblk0p2" -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 /* Using ULP WDOG for reset */ #define WDOG_BASE_ADDR WDG1_RBASE @@ -48,7 +47,7 @@ "fdt_file=imx7ulp-com.dtb\0" \ "fdt_addr=0x63000000\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \ diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h index 4046c3f..8f2cbc6 100644 --- a/include/configs/mx7ulp_evk.h +++ b/include/configs/mx7ulp_evk.h @@ -15,7 +15,6 @@ #define CONFIG_SYS_BOOTM_LEN 0x1000000 #define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */ -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 /* Using ULP WDOG for reset */ #define WDOG_BASE_ADDR WDG1_RBASE @@ -48,7 +47,7 @@ "earlycon=lpuart32,0x402D0010\0" \ "ip_dyn=yes\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ @@ -100,17 +99,6 @@ "bootz; " \ "fi;\0" \ -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "fi; " \ - "fi; " \ - "fi" - #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE SZ_256K diff --git a/include/configs/nas220.h b/include/configs/nas220.h index 99b14ba..815f81f 100644 --- a/include/configs/nas220.h +++ b/include/configs/nas220.h @@ -11,12 +11,6 @@ #ifndef _CONFIG_NAS220_H #define _CONFIG_NAS220_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 /* #define CPU Core subversion */ -#define CONFIG_KW88F6192 /* SOC Name */ - /* power-on led, regulator, sata0, sata1 */ #define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)) #define NAS220_GE_OE_VAL_HIGH (0) @@ -40,7 +34,6 @@ /* * Default environment variables */ -#define CONFIG_BOOTCOMMAND "" #define CONFIG_EXTRA_ENV_SETTINGS \ "bootargs=console=ttyS0,115200\0" \ @@ -61,15 +54,7 @@ #endif /* CONFIG_CMD_NET */ /* - * File system - */ -#define CONFIG_JFFS2_NAND -#define CONFIG_JFFS2_LZO - -/* * EFI partition */ -#define CONFIG_KIRKWOOD_GPIO - #endif /* _CONFIG_NAS220_H */ diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index b37e054..adfc055 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -21,7 +21,6 @@ /* * High Level Configuration Options */ -#define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */ #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap.h> @@ -75,7 +74,6 @@ * Framebuffer */ /* Video console */ -#define CONFIG_VIDEO_LOGO #define VIDEO_FB_16BPP_PIXEL_SWAP #define VIDEO_FB_16BPP_WORD_SWAP @@ -168,12 +166,6 @@ int rx51_kp_getc(struct stdio_dev *sdev); "echo run attachboot - Boot attached kernel image.;" \ "echo" -#define CONFIG_BOOTCOMMAND \ - "run sdboot;" \ - "run emmcboot;" \ - "run attachboot;" \ - "echo" - /* * OMAP3 has 12 GP timers, they can be driven by the system clock * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). diff --git a/include/configs/novena.h b/include/configs/novena.h index 28fb1b8..1ce2f4e 100644 --- a/include/configs/novena.h +++ b/include/configs/novena.h @@ -9,7 +9,6 @@ #define __CONFIG_H /* System configurations */ -#define CONFIG_KEYBOARD #include "mx6_common.h" @@ -87,7 +86,6 @@ #endif /* Video output */ -#define CONFIG_VIDEO_LOGO #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP diff --git a/include/configs/nsa310s.h b/include/configs/nsa310s.h index 950549c..8cc9ca6 100644 --- a/include/configs/nsa310s.h +++ b/include/configs/nsa310s.h @@ -9,25 +9,11 @@ #ifndef _CONFIG_NSA310S_H #define _CONFIG_NSA310S_H -/* high level configuration options */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ -#define CONFIG_KW88F6192 1 /* SOC Name */ -#define CONFIG_KW88F6702 1 /* SOC Name */ - #include "mv-common.h" /* environment variables configuration */ /* default environment variables */ -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ - "ubi part root; " \ - "ubifsmount ubi:rootfs; " \ - "ubifsload 0x800000 ${kernel}; " \ - "ubifsload 0x700000 ${fdt}; " \ - "ubifsumount; " \ - "fdt addr 0x700000; fdt resize; fdt chosen; " \ - "bootz 0x800000 - 0x700000" #define CONFIG_EXTRA_ENV_SETTINGS \ "console=console=ttyS0,115200\0" \ @@ -50,9 +36,4 @@ #define CONFIG_LBA48 #endif /* CONFIG_SATA */ -/* RTC driver configuration */ -#ifdef CONFIG_CMD_DATE -#define CONFIG_RTC_MV -#endif /* CONFIG_CMD_DATE */ - #endif /* _CONFIG_NSA310S_H */ diff --git a/include/configs/octeontx2_common.h b/include/configs/octeontx2_common.h index bc21b79..536dff2 100644 --- a/include/configs/octeontx2_common.h +++ b/include/configs/octeontx2_common.h @@ -7,8 +7,6 @@ #ifndef __OCTEONTX2_COMMON_H__ #define __OCTEONTX2_COMMON_H__ -#define CONFIG_SUPPORT_RAW_INITRD - /** Maximum size of image supported for bootm (and bootable FIT images) */ #define CONFIG_SYS_BOOTM_LEN (256 << 20) @@ -43,7 +41,6 @@ #if defined(CONFIG_MMC_OCTEONTX) #define MMC_SUPPORTS_TUNING /** EMMC specific defines */ -#define CONFIG_SUPPORT_EMMC_RPMB #endif #endif /* __OCTEONTX2_COMMON_H__ */ diff --git a/include/configs/octeontx_common.h b/include/configs/octeontx_common.h index 46908be..8185f4b 100644 --- a/include/configs/octeontx_common.h +++ b/include/configs/octeontx_common.h @@ -61,12 +61,6 @@ # define CONFIG_SYS_64BIT_LBA #endif -/***** SPI Defines *********/ -#ifdef CONFIG_DM_SPI_FLASH -# define CONFIG_SF_DEFAULT_BUS 0 -# define CONFIG_SF_DEFAULT_CS 0 -#endif - /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /** Console I/O Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE @@ -76,9 +70,6 @@ #define CONFIG_SYS_MMC_MAX_BLK_COUNT 8192 /** EMMC specific defines */ -#if defined(CONFIG_MMC_OCTEONTX) -#define CONFIG_SUPPORT_EMMC_RPMB -#endif #if defined(CONFIG_NAND_OCTEONTX) /*#define CONFIG_MTD_CONCAT */ diff --git a/include/configs/odroid.h b/include/configs/odroid.h index 281922a..ed9b41d 100644 --- a/include/configs/odroid.h +++ b/include/configs/odroid.h @@ -13,7 +13,6 @@ #include <configs/exynos4-common.h> -#define CONFIG_SYS_L2CACHE_OFF #ifndef CONFIG_SYS_L2CACHE_OFF #define CONFIG_SYS_L2_PL310 #define CONFIG_SYS_PL310_BASE 0x10502000 @@ -28,8 +27,6 @@ #include <linux/sizes.h> -#define CONFIG_BOOTCOMMAND "run distro_bootcmd ; run autoboot" - #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ - GENERATED_GBL_DATA_SIZE) diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h index 70481b5..a482598 100644 --- a/include/configs/odroid_xu3.h +++ b/include/configs/odroid_xu3.h @@ -80,8 +80,6 @@ * Need to override existing one (smdk5420) with odroid so set_board_info will * use proper prefix when creating full board_name (SYS_BOARD + type) */ -#undef CONFIG_SYS_BOARD -#define CONFIG_SYS_BOARD "odroid" /* Define new extra env settings, including DFU settings */ #undef CONFIG_EXTRA_ENV_SETTINGS diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index e71f737..211f39a 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -142,9 +142,6 @@ "nandboot=run nandbootcommon; "\ "bootm ${loadaddr} - ${fdtaddr}\0"\ -#define CONFIG_BOOTCOMMAND \ - "run autoboot" - /* Miscellaneous configurable options */ /* memtest works on */ diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index f2352d8..45297b9 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -17,7 +17,6 @@ /* * SoC Configuration */ -#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) @@ -161,9 +160,6 @@ * Linux Information */ #define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) -#define CONFIG_BOOTCOMMAND \ - "run envboot; " \ - "run mmcboot; " #define DEFAULT_LINUX_BOOT_ENV \ "loadaddr=0xc0700000\0" \ diff --git a/include/configs/openpiton-riscv64.h b/include/configs/openpiton-riscv64.h index c9d966ff..75b48f8 100644 --- a/include/configs/openpiton-riscv64.h +++ b/include/configs/openpiton-riscv64.h @@ -43,11 +43,4 @@ "mmcdev=0\0" \ "mmcpart=1\0" -#define CONFIG_USE_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND \ - "fdt addr ${fdtcontroladdr}; " \ - "fdt move ${fdtcontroladdr} ${fdt_addr_r}; " \ - "load mmc ${mmcdev}:${mmcpart} ${kernel_addr_r} ${image}; " \ - "booti ${kernel_addr_r} - ${fdt_addr_r}; " - #endif/* __CONFIG_H */ diff --git a/include/configs/openrd.h b/include/configs/openrd.h index 56bfe87..43d0896 100644 --- a/include/configs/openrd.h +++ b/include/configs/openrd.h @@ -13,12 +13,6 @@ #ifndef _CONFIG_OPENRD_H #define _CONFIG_OPENRD_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ -#define CONFIG_KW88F6281 1 /* SOC Name */ - #include "mv-common.h" /* @@ -37,9 +31,6 @@ /* * Default environment variables */ -#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ - "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ - "${x_bootcmd_usb}; bootm 0x6400000;" #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console=ttyS0,115200 " \ CONFIG_MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \ diff --git a/include/configs/opos6uldev.h b/include/configs/opos6uldev.h index d9311a4..ac8eb05 100644 --- a/include/configs/opos6uldev.h +++ b/include/configs/opos6uldev.h @@ -41,7 +41,6 @@ /* LCD */ #ifndef CONFIG_SPL_BUILD #ifdef CONFIG_DM_VIDEO -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR #endif @@ -54,7 +53,6 @@ #define ACFG_CONSOLE_DEV ttymxc0 #define CONFIG_SYS_AUTOLOAD "no" #define CONFIG_ROOTPATH "/tftpboot/" __stringify(CONFIG_BOARD_NAME) "-root" -#define CONFIG_BOOTCOMMAND "run emmcboot" #define CONFIG_EXTRA_ENV_SETTINGS \ "env_version=" __stringify(CONFIG_ENV_VERSION) "\0" \ diff --git a/include/configs/origen.h b/include/configs/origen.h index 881df2d..1caeed6 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -45,22 +45,6 @@ "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \ "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ "source ${loadaddr}\0" -#define CONFIG_BOOTCOMMAND \ - "if mmc rescan; then " \ - "echo SD/MMC found on device ${mmcdev};" \ - "if run loadbootenv; then " \ - "echo Loaded environment from ${bootenv};" \ - "run importbootenv;" \ - "fi;" \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "fi; " \ - "fi;" \ - "load mmc ${mmcdev} ${loadaddr} uImage; bootm ${loadaddr} " #define CONFIG_CLK_1000_400_200 diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 6b4fc39..2e1331b 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -102,12 +102,10 @@ #define CONFIG_SPL_NAND_INIT #define CONFIG_SPL_COMMON_INIT_DDR #define CONFIG_SPL_MAX_SIZE (128 << 10) -#define CONFIG_TPL_TEXT_BASE 0xf8f81000 #define CONFIG_SYS_MPC85XX_NO_RESETVEC #define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) -#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) #elif defined(CONFIG_SPL_BUILD) #define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE @@ -116,7 +114,6 @@ #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 #define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) #endif /* not CONFIG_TPL_BUILD */ #define CONFIG_SPL_PAD_TO 0x20000 @@ -130,7 +127,7 @@ #ifndef CONFIG_SYS_MONITOR_BASE #ifdef CONFIG_TPL_BUILD -#define CONFIG_SYS_MONITOR_BASE CONFIG_TPL_TEXT_BASE +#define CONFIG_SYS_MONITOR_BASE 0xf8f81000 #elif defined(CONFIG_SPL_BUILD) #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE #else @@ -140,17 +137,10 @@ #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ #define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ #define CONFIG_SYS_SATA_MAX_DEVICE 2 #define CONFIG_LBA48 -#if defined(CONFIG_TARGET_P2020RDB) -#define CONFIG_SYS_CLK_FREQ 100000000 -#else -#define CONFIG_SYS_CLK_FREQ 66666666 -#endif - #define CONFIG_HWCONFIG /* * These can be toggled for performance analysis, otherwise use default. @@ -352,22 +342,6 @@ OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \ OR_GPCM_EAD) -#ifdef CONFIG_MTD_RAW_NAND -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ -#define CONFIG_SYS_BR1_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR1_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ -#else -#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ -#ifdef CONFIG_NAND_FSL_ELBC -#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */ -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ -#endif -#endif -#define CONFIG_SYS_BR3_PRELIM CONFIG_CPLD_BR_PRELIM /* CPLD Base Address */ -#define CONFIG_SYS_OR3_PRELIM CONFIG_CPLD_OR_PRELIM /* CPLD Options */ - /* Vsc7385 switch */ #ifdef CONFIG_VSC7385_ENET #define __VSCFW_ADDR "vscfw_addr=ef000000" @@ -385,9 +359,6 @@ OR_GPCM_XACS | OR_GPCM_SCY_15 | OR_GPCM_SETA | \ OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) -#define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_VSC7385_BR_PRELIM -#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_VSC7385_OR_PRELIM - /* The size of the VSC7385 firmware image */ #define CONFIG_VSC7385_IMAGE_SIZE 8192 #endif @@ -553,7 +524,6 @@ #if defined(CONFIG_HAS_FSL_DR_USB) #ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_USB_EHCI_FSL #endif #endif @@ -565,8 +535,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR #endif -#undef CONFIG_WATCHDOG /* watchdog disabled */ - /* * Miscellaneous configurable options */ @@ -646,23 +614,6 @@ __stringify(__SD_RST_CMD)"\0" \ __stringify(__NAND_RST_CMD)"\0" \ __stringify(__PCIE_RST_CMD)"\0" -#define NFSBOOTCOMMAND \ -"setenv bootargs root=/dev/nfs rw " \ -"nfsroot=$serverip:$rootpath " \ -"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ -"console=$consoledev,$baudrate $othbootargs;" \ -"tftp $loadaddr $bootfile;" \ -"tftp $fdtaddr $fdtfile;" \ -"bootm $loadaddr - $fdtaddr" - -#define HDBOOT \ -"setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ -"console=$consoledev,$baudrate $othbootargs;" \ -"usb start;" \ -"ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ -"ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ -"bootm $loadaddr - $fdtaddr" - #define CONFIG_USB_FAT_BOOT \ "setenv bootargs root=/dev/ram rw " \ "console=$consoledev,$baudrate $othbootargs " \ @@ -688,15 +639,4 @@ __stringify(__PCIE_RST_CMD)"\0" "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \ "bootm $norbootaddr - $norfdtaddr" -#define RAMBOOTCOMMAND \ -"setenv bootargs root=/dev/ram rw " \ -"console=$consoledev,$baudrate $othbootargs " \ -"ramdisk_size=$ramdisk_size;" \ -"tftp $ramdiskaddr $ramdiskfile;" \ -"tftp $loadaddr $bootfile;" \ -"tftp $fdtaddr $fdtfile;" \ -"bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND HDBOOT - #endif /* __CONFIG_H */ diff --git a/include/configs/p3450-0000.h b/include/configs/p3450-0000.h index 7f05beb..b03d3a4 100644 --- a/include/configs/p3450-0000.h +++ b/include/configs/p3450-0000.h @@ -24,12 +24,8 @@ func(DHCP, dhcp, na) /* Environment at end of QSPI, in the VER partition */ -#define CONFIG_ENV_SPI_MAX_HZ 48000000 -#define CONFIG_ENV_SPI_MODE SPI_MODE_0 #define CONFIG_SPI_FLASH_SIZE (4 << 20) -#define CONFIG_PREBOOT - #define BOARD_EXTRA_ENV_SETTINGS \ "preboot=if test -e mmc 1:1 /u-boot-preboot.scr; then " \ "load mmc 1:1 ${scriptaddr} /u-boot-preboot.scr; " \ diff --git a/include/configs/pcl063_ull.h b/include/configs/pcl063_ull.h index 0e047df..068fc7d 100644 --- a/include/configs/pcl063_ull.h +++ b/include/configs/pcl063_ull.h @@ -83,8 +83,6 @@ "fit_addr=0x82000000\0" \ ENV_MMC -#define CONFIG_BOOTCOMMAND "run mmc_mmc_fit" - #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(MMC, mmc, 1) \ diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h index 244d373..fd4a0b1 100644 --- a/include/configs/pcm052.h +++ b/include/configs/pcm052.h @@ -25,12 +25,6 @@ #define PCM052_EXTRA_ENV_SETTINGS #endif -/* if no target-specific boot command was defined by the target, - define an empty one */ -#ifndef PCM052_BOOTCOMMAND -#define PCM052_BOOTCOMMAND -#endif - /* if no target-specific extra environment settings were defined by the target, define an empty one */ #ifndef PCM052_NET_INIT @@ -38,7 +32,6 @@ #endif /* boot command, including the target-defined one if any */ -#define CONFIG_BOOTCOMMAND PCM052_BOOTCOMMAND "run bootcmd_nand" /* Extra env settings (including the target-defined ones if any) */ #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/pcm058.h b/include/configs/pcm058.h index a0bb2b5..4d4185b 100644 --- a/include/configs/pcm058.h +++ b/include/configs/pcm058.h @@ -56,6 +56,4 @@ "optargs=rw rootwait\0" \ ENV_MMC \ ENV_NAND - -#define CONFIG_BOOTCOMMAND "run mmcboot;run nandboot" #endif diff --git a/include/configs/pdu001.h b/include/configs/pdu001.h index 3d18747..7ab6a89 100644 --- a/include/configs/pdu001.h +++ b/include/configs/pdu001.h @@ -32,19 +32,6 @@ #define CONSOLE_DEV "ttyO5" #endif -#define CONFIG_BOOTCOMMAND \ - "run eval_boot_device;" \ - "part uuid mmc ${mmc_boot}:${root_fs_partition} root_fs_partuuid;" \ - "setenv bootargs console=${console} " \ - "vt.global_cursor_default=0 " \ - "root=PARTUUID=${root_fs_partuuid} " \ - "rootfstype=ext4 " \ - "rootwait " \ - "rootdelay=1;" \ - "fatload mmc ${mmc_boot} ${fdtaddr} ${fdtfile};" \ - "fatload mmc ${mmc_boot} ${loadaddr} ${bootfile};" \ - "bootz ${loadaddr} - ${fdtaddr}" - #ifndef CONFIG_SPL_BUILD #define CONFIG_EXTRA_ENV_SETTINGS \ DEFAULT_LINUX_BOOT_ENV \ diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h index 38c8a83..7438d0a 100644 --- a/include/configs/phycore_imx8mm.h +++ b/include/configs/phycore_imx8mm.h @@ -14,8 +14,6 @@ #define CONFIG_SYS_BOOTM_LEN SZ_64M #define CONFIG_SPL_MAX_SIZE (148 * SZ_1K) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -39,7 +37,7 @@ "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ "ip_dyn=yes\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=2\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console} " \ @@ -70,14 +68,6 @@ "echo WARN: Cannot load the DT; " \ "fi;\0" \ -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi;" - /* Link Definitions */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 @@ -105,6 +95,5 @@ /* USDHC */ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 #endif /* __PHYCORE_IMX8MM_H */ diff --git a/include/configs/phycore_imx8mp.h b/include/configs/phycore_imx8mp.h index fcd5896..8c5ffee 100644 --- a/include/configs/phycore_imx8mp.h +++ b/include/configs/phycore_imx8mp.h @@ -14,8 +14,6 @@ #define CONFIG_SPL_MAX_SIZE (152 * SZ_1K) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -39,7 +37,7 @@ "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ "ip_dyn=yes\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=2\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console} " \ @@ -70,14 +68,6 @@ "echo WARN: Cannot load the DT; " \ "fi;\0" \ -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi;" - /* Link Definitions */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 @@ -105,6 +95,5 @@ /* USDHC */ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 #endif /* __PHYCORE_IMX8MP_H */ diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h index a83e49f..3624c12 100644 --- a/include/configs/pic32mzdask.h +++ b/include/configs/pic32mzdask.h @@ -33,9 +33,6 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MONITOR_LEN (192 << 10) -#define CONFIG_SYS_ENV_ADDR 0x88300000 -#define CONFIG_SYS_FDT_ADDR 0x89d00000 - /* Memory Test */ /*---------------------------------------------------------------------- @@ -74,8 +71,8 @@ #define MEM_LAYOUT_ENV_SETTINGS \ "kernel_addr_r="__stringify(CONFIG_SYS_LOAD_ADDR)"\0" \ - "fdt_addr_r="__stringify(CONFIG_SYS_FDT_ADDR)"\0" \ - "scriptaddr="__stringify(CONFIG_SYS_ENV_ADDR)"\0" + "fdt_addr_r=0x89d00000\0" \ + "scriptaddr=0x88300000\0" \ #define CONFIG_LEGACY_BOOTCMD_ENV \ "legacy_bootcmd= " \ @@ -99,7 +96,4 @@ CONFIG_LEGACY_BOOTCMD_ENV \ BOOTENV -#undef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND "run distro_bootcmd || run legacy_bootcmd" - #endif /* __PIC32MZDASK_CONFIG_H */ diff --git a/include/configs/pico-imx6.h b/include/configs/pico-imx6.h index 2528d31..1995562 100644 --- a/include/configs/pico-imx6.h +++ b/include/configs/pico-imx6.h @@ -136,7 +136,6 @@ #define CONFIG_FEC_MXC_PHYADDR 1 /* Framebuffer */ -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h index 3fe1783..03e4801 100644 --- a/include/configs/pico-imx6ul.h +++ b/include/configs/pico-imx6ul.h @@ -64,8 +64,6 @@ "bootmenu_2=Boot using PICO-Pi baseboard=" \ "setenv fdtfile imx6ul-pico-pi.dtb\0" \ -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ @@ -133,7 +131,6 @@ #define CONFIG_BOARD_SIZE_LIMIT 715776 #ifdef CONFIG_DM_VIDEO -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR #endif diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h index cbac950..8c0b8c0 100644 --- a/include/configs/pico-imx7d.h +++ b/include/configs/pico-imx7d.h @@ -65,9 +65,6 @@ BOOTENV #endif - -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #define CONFIG_EXTRA_ENV_SETTINGS \ "image=zImage\0" \ "splashpos=m,m\0" \ @@ -124,7 +121,6 @@ #define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08 #ifdef CONFIG_DM_VIDEO -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #endif diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h index 5c1b652..2293a29 100644 --- a/include/configs/pico-imx8mq.h +++ b/include/configs/pico-imx8mq.h @@ -11,8 +11,6 @@ #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ @@ -56,7 +54,7 @@ "initrd_addr=0x43800000\0" \ "initrd_high=0xffffffffffffffff\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \ @@ -82,18 +80,6 @@ "${get_cmd} ${loadaddr} ${image}; " \ "booti; " -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else booti ${loadaddr} - ${fdt_addr}; fi" - /* Link Definitions */ #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 @@ -109,10 +95,6 @@ #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x80000000 /* 2 GiB DDR */ -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ - (PHYS_SDRAM_SIZE >> 1)) - #define CONFIG_MXC_UART_BASE UART1_BASE_ADDR /* Monitor Command Prompt */ @@ -125,12 +107,6 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - -#define CONFIG_MXC_GPIO - -#define CONFIG_OF_SYSTEM_SETUP - #define CONFIG_SYS_BOOTM_LEN SZ_128M #endif diff --git a/include/configs/plutux.h b/include/configs/plutux.h index 7fc06e8..9a4a632 100644 --- a/include/configs/plutux.h +++ b/include/configs/plutux.h @@ -19,7 +19,6 @@ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE /* NAND support */ -#define CONFIG_TEGRA_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Environment in NAND, aligned to start of last sector */ diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index d530107..be24d82 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -179,14 +179,10 @@ #ifdef CONFIG_SYS_USE_DATAFLASH_CS0 /* bootstrap + u-boot + env + linux in dataflash on CS0 */ -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x22000000 0x84000 0x210000; " \ - "bootm 0x22000000" #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CONFIG_SYS_USE_NANDFLASH */ /* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" #elif defined (CONFIG_SYS_USE_FLASH) /* JFFS Partition offset set */ @@ -196,8 +192,6 @@ /* 512k reserved for u-boot */ #define CONFIG_SYS_JFFS2_FIRST_SECTOR 11 -#define CONFIG_BOOTCOMMAND "run flashboot" - #define CONFIG_CON_ROT "fbcon=rotate:3 " #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index 8089993..e9eb736 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -179,11 +179,6 @@ #endif -#define CONFIG_JFFS2_NAND 1 -#define CONFIG_JFFS2_DEV "nand0" /* NAND device jffs2 lives on */ -#define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */ -#define CONFIG_JFFS2_PART_SIZE (256 * 1024 * 1024) /* partition size*/ - /* PSRAM */ #define PHYS_PSRAM 0x70000000 #define PHYS_PSRAM_SIZE 0x00400000 /* 4MB */ @@ -209,14 +204,10 @@ #ifdef CONFIG_SYS_USE_DATAFLASH /* bootstrap + u-boot + env + linux in dataflash on CS0 */ -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x22000000 0x84000 0x294000; " \ - "bootm 0x22000000" #elif defined(CONFIG_SYS_USE_NANDFLASH) /* CFG_USE_NANDFLASH */ /* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" #elif defined(CONFIG_SYS_USE_FLASH) /* CFG_USE_FLASH */ /* JFFS Partition offset set */ @@ -226,7 +217,6 @@ /* 512k reserved for u-boot */ #define CONFIG_SYS_JFFS2_FIRST_SECTOR 11 -#define CONFIG_BOOTCOMMAND "run flashboot" #define CONFIG_ROOTPATH "/ronetix/rootfs" #define CONFIG_CON_ROT "fbcon=rotate:3 " diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index 3d039b6..b205391 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -45,7 +45,6 @@ #define CONFIG_SYS_NAND_MASK_CLE BIT(22) #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD3 -#define CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT #endif /* Ethernet */ @@ -54,16 +53,8 @@ #ifdef CONFIG_NAND_BOOT /* bootstrap + u-boot + env in nandflash */ - -#define CONFIG_BOOTCOMMAND \ - "nand read 0x70000000 0x200000 0x300000;" \ - "bootm 0x70000000" #elif CONFIG_SD_BOOT /* bootstrap + u-boot + env + linux in mmc */ - -#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x71000000 dtb; " \ - "fatload mmc 0:1 0x72000000 zImage; " \ - "bootz 0x72000000 - 0x71000000" #endif /* Defines for SPL */ diff --git a/include/configs/pogo_e02.h b/include/configs/pogo_e02.h index f49bcfb..3e94125 100644 --- a/include/configs/pogo_e02.h +++ b/include/configs/pogo_e02.h @@ -12,12 +12,6 @@ #ifndef _CONFIG_POGO_E02_H #define _CONFIG_POGO_E02_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -#define CONFIG_KW88F6281 /* SOC Name */ - #include "mv-common.h" /* @@ -27,10 +21,6 @@ /* * Default environment variables */ -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs $(bootargs_console); " \ - "run bootcmd_usb; " \ - "bootm 0x00800000 0x01100000" #define CONFIG_EXTRA_ENV_SETTINGS \ "mtdparts=mtdparts=orion_nand:1M(u-boot),4M(uImage)," \ diff --git a/include/configs/porter.h b/include/configs/porter.h index 7ffcf5f..867dada 100644 --- a/include/configs/porter.h +++ b/include/configs/porter.h @@ -35,8 +35,6 @@ #define CONFIG_BITBANGMII_MULTI /* Board Clock */ -#define RMOBILE_XTAL_CLK 20000000u -#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" diff --git a/include/configs/presidio_asic.h b/include/configs/presidio_asic.h index 3df5143..928ccb1 100644 --- a/include/configs/presidio_asic.h +++ b/include/configs/presidio_asic.h @@ -10,8 +10,6 @@ #define CONFIG_REMAKE_ELF -#define CONFIG_SUPPORT_RAW_INITRD - #define CONFIG_SYS_INIT_SP_ADDR 0x00100000 #define CONFIG_SYS_BOOTM_LEN 0x00c00000 diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h index a333326..753fc14 100644 --- a/include/configs/pxm2.h +++ b/include/configs/pxm2.h @@ -71,44 +71,11 @@ #ifndef CONFIG_RESTORE_FLASH /* set to negative value for no autoboot */ - -#define CONFIG_BOOTCOMMAND \ - "if dfubutton; then " \ - "run dfu_start; " \ - "reset; " \ - "fi; " \ - "if mmc rescan; then " \ - "echo SD/MMC found on device ${mmc_dev};" \ - "if run loadbootenv; then " \ - "echo Loaded environment from ${bootenv};" \ - "run importbootenv;" \ - "fi;" \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run mmc_load_uimage; then " \ - "run mmc_args;" \ - "bootm ${kloadaddr};" \ - "fi;" \ - "fi;" \ - "run nand_boot;" \ - "reset;" - -#else - -#define CONFIG_BOOTCOMMAND \ - "setenv autoload no; " \ - "dhcp; " \ - "if tftp 80000000 debrick.scr; then " \ - "source 80000000; " \ - "fi" #endif #endif /* CONFIG_SPL_BUILD */ #if defined(CONFIG_VIDEO) #define CONFIG_VIDEO_DA8XX -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define DA8XX_LCD_CNTL_BASE LCD_CNTL_BASE #define PWM_TICKS 0x1388 diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h index f79e0fe..e257c0e 100644 --- a/include/configs/qemu-ppce500.h +++ b/include/configs/qemu-ppce500.h @@ -13,8 +13,6 @@ #define CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ - #define CONFIG_ENABLE_36BIT_PHYS /* Needed to fill the ccsrbar pointer */ @@ -47,8 +45,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void); #define CONFIG_CHIP_SELECTS_PER_CTRL 0 -#define CONFIG_SYS_CLK_FREQ 33000000 - #define CONFIG_SYS_BOOT_BLOCK 0x00000000 /* boot TLB */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE @@ -100,7 +96,4 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void); #define CONFIG_BOOTFILE "uImage" #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ -#define CONFIG_BOOTCOMMAND \ - "test -n \"$qemu_kernel_addr\" && bootm $qemu_kernel_addr - $fdtcontroladdr\0" - #endif /* __QEMU_PPCE500_H */ diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h index 58ca6c2..8e86830 100644 --- a/include/configs/r2dplus.h +++ b/include/configs/r2dplus.h @@ -1,7 +1,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_CPU_SH7751 1 #define __LITTLE_ENDIAN__ 1 /* SCIF */ @@ -29,7 +28,6 @@ /* * SuperH Clock setting */ -#define CONFIG_SYS_CLK_FREQ 60000000 #define CONFIG_SYS_PLL_SETTLING_TIME 100/* in us */ /* @@ -44,7 +42,6 @@ #define CONFIG_SYS_ATA_DATA_OFFSET 0x1000 /* data reg offset */ #define CONFIG_SYS_ATA_REG_OFFSET 0x1000 /* reg offset */ #define CONFIG_SYS_ATA_ALT_OFFSET 0x800 /* alternate register offset */ -#define CONFIG_IDE_SWAP_IO /* * SuperH PCI Bridge Configration diff --git a/include/configs/rastaban.h b/include/configs/rastaban.h index de8ea8b..8e20a44 100644 --- a/include/configs/rastaban.h +++ b/include/configs/rastaban.h @@ -57,24 +57,6 @@ #ifndef CONFIG_RESTORE_FLASH /* set to negative value for no autoboot */ - -#define CONFIG_BOOTCOMMAND \ -"if dfubutton; then " \ - "run dfu_start; " \ - "reset; " \ -"fi;" \ -"run nand_boot;" \ -"run nand_boot_backup;" \ -"reset;" - -#else - -#define CONFIG_BOOTCOMMAND \ - "setenv autoload no; " \ - "dhcp; " \ - "if tftp 80000000 debrick.scr; then " \ - "source 80000000; " \ - "fi" #endif #endif /* CONFIG_SPL_BUILD */ #endif /* ! __CONFIG_RASTABAN_H */ diff --git a/include/configs/rcar-gen2-common.h b/include/configs/rcar-gen2-common.h index 595482c..f1f5d07 100644 --- a/include/configs/rcar-gen2-common.h +++ b/include/configs/rcar-gen2-common.h @@ -42,6 +42,6 @@ #define CONFIG_TMU_TIMER #define CONFIG_SYS_TIMER_COUNTS_DOWN #define CONFIG_SYS_TIMER_COUNTER (TMU_BASE + 0xc) /* TCNT0 */ -#define CONFIG_SYS_TIMER_RATE (CONFIG_SYS_CLK_FREQ / 8) +#define CONFIG_SYS_TIMER_RATE (get_board_sys_clk() / 8) #endif /* __RCAR_GEN2_COMMON_H */ diff --git a/include/configs/rcar-gen3-common.h b/include/configs/rcar-gen3-common.h index 2b3e1bb..eed2125 100644 --- a/include/configs/rcar-gen3-common.h +++ b/include/configs/rcar-gen3-common.h @@ -55,11 +55,6 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" -#define CONFIG_BOOTCOMMAND \ - "tftp 0x48080000 Image; " \ - "tftp 0x48000000 Image-"CONFIG_DEFAULT_FDT_FILE"; " \ - "booti 0x48080000 - 0x48000000" - /* SPL support */ #if defined(CONFIG_R8A7795) || defined(CONFIG_R8A7796) || defined(CONFIG_R8A77965) #define CONFIG_SPL_BSS_START_ADDR 0xe633f000 diff --git a/include/configs/rk3036_common.h b/include/configs/rk3036_common.h index b133d8e..00c453d 100644 --- a/include/configs/rk3036_common.h +++ b/include/configs/rk3036_common.h @@ -12,7 +12,6 @@ #define CONFIG_ROCKCHIP_STIMER_BASE 0x200440a0 #define COUNTER_FREQUENCY 24000000 -#define CONFIG_SYS_ARCH_TIMER #define CONFIG_SYS_HZ_CLOCK 24000000 #define CONFIG_SYS_INIT_SP_ADDR 0x60100000 diff --git a/include/configs/rk3128_common.h b/include/configs/rk3128_common.h index 8b7a0bb..97cacea 100644 --- a/include/configs/rk3128_common.h +++ b/include/configs/rk3128_common.h @@ -13,7 +13,6 @@ #define CONFIG_ROCKCHIP_STIMER_BASE 0x200440a0 #define COUNTER_FREQUENCY 24000000 -#define CONFIG_SYS_ARCH_TIMER #define CONFIG_SYS_HZ_CLOCK 24000000 #define CONFIG_IRAM_BASE 0x10080000 diff --git a/include/configs/rk3188_common.h b/include/configs/rk3188_common.h index e7c0964..7449e81 100644 --- a/include/configs/rk3188_common.h +++ b/include/configs/rk3188_common.h @@ -22,7 +22,6 @@ /* spl size 32kb sram - 2kb bootrom */ #define CONFIG_SPL_MAX_SIZE (0x8000 - 0x800) -#define CONFIG_ROCKCHIP_SERIAL 1 #define CONFIG_SPL_STACK 0x10087fff diff --git a/include/configs/rk322x_common.h b/include/configs/rk322x_common.h index a46b1ff..ef55ef0 100644 --- a/include/configs/rk322x_common.h +++ b/include/configs/rk322x_common.h @@ -13,7 +13,6 @@ #define CONFIG_ROCKCHIP_STIMER_BASE 0x110d0020 #define COUNTER_FREQUENCY 24000000 -#define CONFIG_SYS_ARCH_TIMER #define CONFIG_SYS_HZ_CLOCK 24000000 #define CONFIG_SYS_INIT_SP_ADDR 0x61100000 diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h index abbb273..490da7c 100644 --- a/include/configs/rk3288_common.h +++ b/include/configs/rk3288_common.h @@ -15,7 +15,6 @@ #define CONFIG_ROCKCHIP_STIMER_BASE 0xff810020 #define COUNTER_FREQUENCY 24000000 -#define CONFIG_SYS_ARCH_TIMER #define CONFIG_SYS_HZ_CLOCK 24000000 #ifdef CONFIG_SPL_ROCKCHIP_BACK_TO_BROM diff --git a/include/configs/rk3308_common.h b/include/configs/rk3308_common.h index 496f462..1664707 100644 --- a/include/configs/rk3308_common.h +++ b/include/configs/rk3308_common.h @@ -12,7 +12,6 @@ #define CONFIG_SPL_MAX_SIZE 0x20000 #define CONFIG_SPL_BSS_START_ADDR 0x00400000 #define CONFIG_SPL_BSS_MAX_SIZE 0x2000 -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 #define CONFIG_SYS_NS16550_MEM32 diff --git a/include/configs/rpi.h b/include/configs/rpi.h index 4c5c1ac..d5e064f 100644 --- a/include/configs/rpi.h +++ b/include/configs/rpi.h @@ -44,7 +44,6 @@ /* GPIO */ #define CONFIG_BCM2835_GPIO /* LCD */ -#define CONFIG_LCD_DT_SIMPLEFB #define CONFIG_VIDEO_BCM2835 /* DFU over USB/UDC */ diff --git a/include/configs/rut.h b/include/configs/rut.h index 68d68d0..02d330e 100644 --- a/include/configs/rut.h +++ b/include/configs/rut.h @@ -63,41 +63,12 @@ #ifndef CONFIG_RESTORE_FLASH /* set to negative value for no autoboot */ - -#define CONFIG_BOOTCOMMAND \ - "if mmc rescan; then " \ - "echo SD/MMC found on device ${mmc_dev};" \ - "if run loadbootenv; then " \ - "echo Loaded environment from ${bootenv};" \ - "run importbootenv;" \ - "fi;" \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run mmc_load_uimage; then " \ - "run mmc_args;" \ - "bootm ${kloadaddr};" \ - "fi;" \ - "fi;" \ - "run nand_boot;" \ - "reset;" - -#else - -#define CONFIG_BOOTCOMMAND \ - "setenv autoload no; " \ - "dhcp; " \ - "if tftp 80000000 debrick.scr; then " \ - "source 80000000; " \ - "fi" #endif #endif /* CONFIG_SPL_BUILD */ #if defined(CONFIG_VIDEO) #define CONFIG_VIDEO_DA8XX -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define DA8XX_LCD_CNTL_BASE LCD_CNTL_BASE diff --git a/include/configs/s5p4418_nanopi2.h b/include/configs/s5p4418_nanopi2.h index 2e94613..632fc0c 100644 --- a/include/configs/s5p4418_nanopi2.h +++ b/include/configs/s5p4418_nanopi2.h @@ -104,16 +104,6 @@ (void *)PHY_BASEADDR_UART3} /*----------------------------------------------------------------------- - * PLL - */ -#define CONFIG_SYS_PLLFIN 24000000UL - -/*----------------------------------------------------------------------- - * Timer - */ -#define CONFIG_TIMER_SYS_TICK_CH 0 - -/*----------------------------------------------------------------------- * BACKLIGHT */ #ifndef CONFIG_S5P4418_ONEWIRE @@ -131,8 +121,6 @@ * VIDEO */ -#define CONFIG_VIDEO_LOGO - #ifdef CONFIG_VIDEO_LOGO #ifdef CONFIG_SPLASH_SCREEN #define SPLASH_FILE logo.bmp diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index b4a3cc0..e3b091a 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -18,9 +18,6 @@ #include <linux/sizes.h> #include <asm/arch/cpu.h> /* get chip and board defs */ -/* input clock of PLL: has 24MHz input clock at S5PC110 */ -#define CONFIG_SYS_CLK_FREQ_C110 24000000 - /* DRAM Base */ #define CONFIG_SYS_SDRAM_BASE 0x30000000 @@ -70,8 +67,6 @@ "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \ "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \ -#define CONFIG_BOOTCOMMAND "run mmcboot" - #define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext4" \ " ${console} ${meminfo}" diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index ff29de0..29adab3 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -14,7 +14,6 @@ #define CONFIG_TIZEN /* TIZEN lib */ /* Keep L2 Cache Disabled */ -#define CONFIG_SYS_L2CACHE_OFF 1 /* Universal has 2 banks of DRAM */ #define CONFIG_SYS_SDRAM_BASE 0x40000000 @@ -22,8 +21,6 @@ #define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */ -#define CONFIG_BOOTCOMMAND "run mmcboot" - #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ - GENERATED_GBL_DATA_SIZE) @@ -106,11 +103,6 @@ #define CONFIG_USB_GADGET_DWC2_OTG_PHY -/* - * SPI Settings - */ -#define CONFIG_SOFT_SPI - #ifndef __ASSEMBLY__ void universal_spi_scl(int bit); void universal_spi_sda(int bit); diff --git a/include/configs/salvator-x.h b/include/configs/salvator-x.h index 1eafff1..c29b34e 100644 --- a/include/configs/salvator-x.h +++ b/include/configs/salvator-x.h @@ -23,7 +23,6 @@ #define CONFIG_FLASH_SHOW_PROGRESS 45 #define CONFIG_SYS_FLASH_QUIET_TEST #define CONFIG_SYS_FLASH_BANKS_LIST { 0x08000000 } -#define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 #define CONFIG_SYS_MAX_FLASH_SECT 256 diff --git a/include/configs/sam9x60ek.h b/include/configs/sam9x60ek.h index df30d48..eb96e50 100644 --- a/include/configs/sam9x60ek.h +++ b/include/configs/sam9x60ek.h @@ -50,24 +50,12 @@ #ifdef CONFIG_SD_BOOT /* bootstrap + u-boot + env + linux in sd card */ -#define CONFIG_BOOTCOMMAND \ - "fatload mmc 0:1 0x21000000 at91-sam9x60ek.dtb;" \ - "fatload mmc 0:1 0x22000000 zImage;" \ - "bootz 0x22000000 - 0x21000000" #elif defined(CONFIG_NAND_BOOT) /* bootstrap + u-boot + env + linux in nandflash */ -#define CONFIG_BOOTCOMMAND "nand read " \ - "0x22000000 0x200000 0x600000; " \ - "nand read 0x21000000 0x180000 0x20000; " \ - "bootz 0x22000000 - 0x21000000" #elif defined(CONFIG_QSPI_BOOT) /* bootstrap + u-boot + env + linux in SPI NOR flash */ -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x21000000 0x180000 0x80000; " \ - "sf read 0x22000000 0x200000 0x600000; " \ - "bootz 0x22000000 - 0x21000000" #endif #endif diff --git a/include/configs/sama5d27_som1_ek.h b/include/configs/sama5d27_som1_ek.h index 1c30e44..f7d8fb6 100644 --- a/include/configs/sama5d27_som1_ek.h +++ b/include/configs/sama5d27_som1_ek.h @@ -21,13 +21,8 @@ (0x22000000 + 16 * 1024 - GENERATED_GBL_DATA_SIZE) #endif -#undef CONFIG_BOOTCOMMAND #ifdef CONFIG_SD_BOOT /* bootstrap + u-boot + env in sd card */ -#define CONFIG_BOOTCOMMAND "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x22000000 " \ - CONFIG_DEFAULT_DEVICE_TREE ".dtb; " \ - "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x23000000 zImage; " \ - "bootz 0x23000000 - 0x22000000" #endif /* SPL */ diff --git a/include/configs/sama5d2_icp.h b/include/configs/sama5d2_icp.h index 53113f0..c3a5c2a 100644 --- a/include/configs/sama5d2_icp.h +++ b/include/configs/sama5d2_icp.h @@ -25,21 +25,12 @@ (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) #endif -/* NAND flash */ - -/* SPI flash */ -#define CONFIG_SF_DEFAULT_SPEED 66000000 - -#undef CONFIG_BOOTCOMMAND #ifdef CONFIG_SD_BOOT /* u-boot env in sd/mmc card */ #define FAT_ENV_INTERFACE "mmc" #define FAT_ENV_DEVICE_AND_PART "0" #define FAT_ENV_FILE "uboot.env" /* bootstrap + u-boot + env in sd card */ -#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 at91-sama5d2_icp.dtb; " \ - "fatload mmc 0:1 0x22000000 zImage; " \ - "bootz 0x22000000 - 0x21000000" #endif /* SPL */ diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h index da573bc..11c13c6 100644 --- a/include/configs/sama5d2_xplained.h +++ b/include/configs/sama5d2_xplained.h @@ -23,31 +23,10 @@ #ifdef CONFIG_SD_BOOT /* bootstrap + u-boot + env in sd card */ -#undef CONFIG_BOOTCOMMAND - -#define CONFIG_BOOTCOMMAND "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x22000000 at91-sama5d2_xplained.dtb; " \ - "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x23000000 zImage; " \ - "bootz 0x23000000 - 0x22000000" #elif CONFIG_SPI_BOOT /* bootstrap + u-boot + env in sd card, but kernel + dtb in eMMC */ -#undef CONFIG_BOOTCOMMAND - -#define CONFIG_BOOTCOMMAND "ext4load mmc 0:1 0x22000000 /boot/at91-sama5d2_xplained.dtb; " \ - "ext4load mmc 0:1 0x23000000 /boot/zImage; " \ - "bootz 0x23000000 - 0x22000000" - -#endif - -#ifdef CONFIG_QSPI_BOOT -#undef CONFIG_ENV_SPI_BUS -#undef CONFIG_BOOTCOMMAND -#define CONFIG_ENV_SPI_BUS 1 -#define CONFIG_BOOTCOMMAND "sf probe 1:0; " \ - "sf read 0x22000000 0x180000 0x80000; " \ - "sf read 0x23000000 0x200000 0x600000; "\ - "bootz 0x23000000 - 0x22000000" #endif diff --git a/include/configs/sama7g5ek.h b/include/configs/sama7g5ek.h index 9b7cc2c..2aec9ff 100644 --- a/include/configs/sama7g5ek.h +++ b/include/configs/sama7g5ek.h @@ -24,20 +24,6 @@ GENERATED_GBL_DATA_SIZE) #endif -#ifndef CONFIG_BOOTCOMMAND -#ifdef CONFIG_SD_BOOT -/* u-boot env in sd/mmc card */ - -/* bootstrap + u-boot + env in sd card */ -#define CONFIG_BOOTCOMMAND "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x61000000 at91-sama7g5ek.dtb; " \ - "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART " 0x62000000 zImage; " \ - "bootz 0x62000000 - 0x61000000" -#else -#define CONFIG_BOOTCOMMAND "Place your bootcommand here" -#endif - -#endif - #define CONFIG_ARP_TIMEOUT 200 #define CONFIG_NET_RETRY_COUNT 50 diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index d614b70..cd7d99e 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -10,24 +10,10 @@ #define CONFIG_IO_TRACE #endif -#ifndef CONFIG_TIMER -#define CONFIG_SYS_TIMER_RATE 1000000 -#endif - -#define CONFIG_HOST_MAX_DEVICES 4 - #define CONFIG_MALLOC_F_ADDR 0x0010000 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -/* turn on command-line edit/c/auto */ - -/* SPI - enable all SPI flash types for testing purposes */ - -#define CONFIG_SYS_FDT_LOAD_ADDR 0x100 - -#define CONFIG_PHYSMEM - /* Size of our emulated memory */ #define SB_CONCAT(x, y) x ## y #define SB_TO_UL(s) SB_CONCAT(s, UL) @@ -39,16 +25,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200} -#define BOOT_TARGET_DEVICES(func) \ - func(HOST, host, 1) \ - func(HOST, host, 0) - -#ifdef __ASSEMBLY__ -#define BOOTENV -#else -#include <config_distro_bootcmd.h> -#endif - #define CONFIG_KEEP_SERVERADDR #define CONFIG_UDP_CHECKSUM #define CONFIG_TIMESTAMP @@ -58,44 +34,6 @@ #define CONFIG_SANDBOX_SDL #endif -/* LCD and keyboard require SDL support */ -#ifdef CONFIG_SANDBOX_SDL -#define LCD_BPP LCD_COLOR16 -#define CONFIG_LCD_BMP_RLE8 - -#define CONFIG_KEYBOARD - -#define SANDBOX_SERIAL_SETTINGS "stdin=serial,cros-ec-keyb,usbkbd\0" \ - "stdout=serial,vidconsole\0" \ - "stderr=serial,vidconsole\0" -#else -#define SANDBOX_SERIAL_SETTINGS "stdin=serial\0" \ - "stdout=serial,vidconsole\0" \ - "stderr=serial,vidconsole\0" -#endif - -#define SANDBOX_ETH_SETTINGS "ethaddr=00:00:11:22:33:44\0" \ - "eth2addr=00:00:11:22:33:48\0" \ - "eth3addr=00:00:11:22:33:45\0" \ - "eth4addr=00:00:11:22:33:48\0" \ - "eth5addr=00:00:11:22:33:46\0" \ - "eth6addr=00:00:11:22:33:47\0" \ - "ipaddr=1.2.3.4\0" - -#define MEM_LAYOUT_ENV_SETTINGS \ - "bootm_size=0x10000000\0" \ - "kernel_addr_r=0x1000000\0" \ - "fdt_addr_r=0xc00000\0" \ - "ramdisk_addr_r=0x2000000\0" \ - "scriptaddr=0x1000\0" \ - "pxefile_addr_r=0x2000\0" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - SANDBOX_SERIAL_SETTINGS \ - SANDBOX_ETH_SETTINGS \ - BOOTENV \ - MEM_LAYOUT_ENV_SETTINGS - #ifndef CONFIG_SPL_BUILD #define CONFIG_SYS_IDE_MAXBUS 1 #define CONFIG_SYS_ATA_IDE0_OFFSET 0 diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index c51517a..e6c200f 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -27,7 +27,6 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ /* NAND support */ -#define CONFIG_TEGRA_NAND /* Max number of NAND devices */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index e28f984..8dba4fc 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -9,12 +9,7 @@ #ifndef _CONFIG_SHEEVAPLUG_H #define _CONFIG_SHEEVAPLUG_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ - -#include "mv-plug-common.h" +#include "mv-common.h" /* * Environment variables configurations @@ -32,9 +27,6 @@ /* * Default environment variables */ -#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \ - "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ - "bootm 0x6400000;" #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \ "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS_DEFAULT \ diff --git a/include/configs/siemens-ccp-common.h b/include/configs/siemens-ccp-common.h deleted file mode 100644 index 01051c8..0000000 --- a/include/configs/siemens-ccp-common.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* Be very careful updating CONFIG_IDENT_STRING - * This string will control the update flow whether an U-Boot should be - * updated or not. If the version of installed U-Boot (in flash) is smaller - * than the version to be installed (from update file), an update will - * be performed. - * - * General rules: - * 1. First 4 characters ' ##v' or IDENT_MAGIC represent kind of a magic number - * to identify the following strings after easily. Don't change them! - * - * 2. First 2 digits after 'v' or CCP_MAJOR are updated with U-Boot version - * change, e.g. from 2015.04 to 2018.03 - * - * 3. Second 2 digits after '.' or CCP_MINOR are updated if we want to upgrade - * U-Boot within an U-Boot version. - */ -#define CCP_IDENT_MAGIC " ##v" -#define GENERATE_CCP_VERSION(MAJOR, MINOR) CCP_IDENT_MAGIC MAJOR "." MINOR diff --git a/include/configs/sifive-unleashed.h b/include/configs/sifive-unleashed.h index 8535678..920f314 100644 --- a/include/configs/sifive-unleashed.h +++ b/include/configs/sifive-unleashed.h @@ -74,10 +74,6 @@ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ BOOTENV \ BOOTENV_SF - -#define CONFIG_PREBOOT \ - "setenv fdt_addr ${fdtcontroladdr};" \ - "fdt addr ${fdtcontroladdr};" #endif #endif /* __CONFIG_H */ diff --git a/include/configs/sifive-unmatched.h b/include/configs/sifive-unmatched.h index f68d7d7..30adfe9 100644 --- a/include/configs/sifive-unmatched.h +++ b/include/configs/sifive-unmatched.h @@ -32,8 +32,6 @@ #define CONFIG_STANDALONE_LOAD_ADDR 0x80200000 -#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit resources */ - #define CONFIG_SYS_SCSI_MAX_SCSI_ID 4 /* Environment options */ @@ -72,10 +70,6 @@ "partitions=" PARTS_DEFAULT "\0" \ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ BOOTENV - -#define CONFIG_PREBOOT \ - "setenv fdt_addr ${fdtcontroladdr};" \ - "fdt addr ${fdtcontroladdr};" #endif /* CONFIG_SPL_BUILD */ #define CONFIG_SYS_EEPROM_BUS_NUM 0 diff --git a/include/configs/silk.h b/include/configs/silk.h index eee60fd..29350a6 100644 --- a/include/configs/silk.h +++ b/include/configs/silk.h @@ -35,8 +35,6 @@ #define CONFIG_BITBANGMII_MULTI /* Board Clock */ -#define RMOBILE_XTAL_CLK 20000000u -#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" diff --git a/include/configs/slimbootloader.h b/include/configs/slimbootloader.h index b816907..ff0ed18 100644 --- a/include/configs/slimbootloader.h +++ b/include/configs/slimbootloader.h @@ -35,15 +35,5 @@ /* * Override CONFIG_BOOTCOMMAND in x86-common.h */ -#undef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND \ - "if test ${bootdev} = \"usb\"; then ${bootdev} start; fi; " \ - "if test ${bootdev} = \"scsi\"; then ${bootdev} scan; fi; " \ - "${bootdev} info; " \ - "${bootfsload} ${bootdev} ${bootdevnum}:${bootdevpart} " \ - "${loadaddr} ${bootfile}; " \ - "${bootfsload} ${bootdev} ${bootdevnum}:${bootdevpart} " \ - "${ramdiskaddr} ${ramdiskfile}; " \ - "zboot ${loadaddr} 0 ${ramdiskaddr} ${filesize}" #endif /* __SLIMBOOTLOADER_CONFIG_H__ */ diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index 7ce3aea..8bfd1fc 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -91,11 +91,6 @@ /* BOOTP and DHCP options */ #define CONFIG_BOOTP_BOOTFILESIZE -#define NFSBOOTCOMMAND \ - "setenv autoload yes; setenv autoboot yes; " \ - "setenv bootargs ${basicargs} ${mtdparts} " \ - "root=/dev/nfs ip=dhcp nfsroot=${serverip}:/srv/nfs/rootfs; " \ - "dhcp" #if !defined(CONFIG_SPL_BUILD) /* USB configuration */ @@ -116,7 +111,6 @@ #endif /* General Boot Parameter */ -#define CONFIG_BOOTCOMMAND "run flashboot" #define CONFIG_SYS_CBSIZE 512 /* diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h index 3af1367..d7e86f2 100644 --- a/include/configs/smdk5250.h +++ b/include/configs/smdk5250.h @@ -14,7 +14,6 @@ #undef CONFIG_EXYNOS_FB #undef CONFIG_EXYNOS_DP -#undef CONFIG_KEYBOARD #define CONFIG_BOARD_COMMON diff --git a/include/configs/smdk5420.h b/include/configs/smdk5420.h index d06dfe4..38691b6 100644 --- a/include/configs/smdk5420.h +++ b/include/configs/smdk5420.h @@ -15,8 +15,6 @@ #undef CONFIG_EXYNOS_FB #undef CONFIG_EXYNOS_DP -#undef CONFIG_KEYBOARD - #define CONFIG_BOARD_COMMON #define CONFIG_SMDK5420 /* which is in a SMDK5420 */ diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index a5edf04..28ff48b 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -22,7 +22,6 @@ #include <asm/arch/cpu.h> /* get chip and board defs */ /* input clock of PLL: SMDKC100 has 12MHz input clock */ -#define CONFIG_SYS_CLK_FREQ 12000000 /* DRAM Base */ #define CONFIG_SYS_SDRAM_BASE 0x30000000 @@ -36,8 +35,6 @@ /* PWM */ #define CONFIG_PWM 1 -#define CONFIG_BOOTCOMMAND "run ubifsboot" - #define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext2" \ " console=ttySAC0,115200n8" \ " mem=128M" diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index 4a6b625..f113fa4 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -26,8 +26,6 @@ /* MMC SPL */ #define COPY_BL2_FNPTR_ADDR 0x00002488 -#define CONFIG_BOOTCOMMAND "fatload mmc 0 40007000 uImage; bootm 40007000" - /* SMDKV310 has 4 bank of DRAM */ #define SDRAM_BANK_SIZE (512UL << 20UL) /* 512 MB */ #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE diff --git a/include/configs/smegw01.h b/include/configs/smegw01.h index bbdd42b..a7f7756 100644 --- a/include/configs/smegw01.h +++ b/include/configs/smegw01.h @@ -16,7 +16,6 @@ /* MMC Config*/ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 #define CONFIG_EXTRA_ENV_SETTINGS \ "image=zImage\0" \ @@ -36,11 +35,6 @@ "bootz ${loadaddr} - ${fdt_addr}; " \ "fi;\0" \ -#define CONFIG_BOOTCOMMAND \ - "if run loadimage; then " \ - "run mmcboot; " \ - "fi; " \ - /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/snapper9g45.h b/include/configs/snapper9g45.h index de918e7..3889a88 100644 --- a/include/configs/snapper9g45.h +++ b/include/configs/snapper9g45.h @@ -45,9 +45,6 @@ #define CONFIG_AT91_WANTS_COMMON_PHY #define CONFIG_TFTP_PORT -/* MMC */ -#define CONFIG_GENERIC_ATMEL_MCI - /* LCD */ #define CONFIG_ATMEL_LCD #define CONFIG_GURNARD_SPLASH diff --git a/include/configs/sniper.h b/include/configs/sniper.h index 7c563b7..ca3da95 100644 --- a/include/configs/sniper.h +++ b/include/configs/sniper.h @@ -102,16 +102,4 @@ * Boot */ -#define CONFIG_BOOTCOMMAND \ - "setenv boot_mmc_part ${kernel_mmc_part}; " \ - "if test reboot-${reboot-mode} = reboot-r; then " \ - "echo recovery; setenv boot_mmc_part ${recovery_mmc_part}; fi; " \ - "if test reboot-${reboot-mode} = reboot-b; then " \ - "echo fastboot; fastboot 0; fi; " \ - "part start mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_start; " \ - "part size mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_size; " \ - "mmc dev ${boot_mmc_dev}; " \ - "mmc read ${kernel_addr_r} ${boot_mmc_start} ${boot_mmc_size} && " \ - "bootm ${kernel_addr_r};" - #endif diff --git a/include/configs/socfpga_arria5_secu1.h b/include/configs/socfpga_arria5_secu1.h index 21e70c2..0935eae 100644 --- a/include/configs/socfpga_arria5_secu1.h +++ b/include/configs/socfpga_arria5_secu1.h @@ -27,19 +27,6 @@ /* Booting Linux */ #define CONFIG_BOOTFILE "zImage" -#define CONFIG_BOOTCOMMAND \ - "setenv bootcmd '" \ - "bridge enable; " \ - "if test ${bootnum} = \"b\"; " \ - "then run _fpga_loadsafe; " \ - "else if test ${bootcount} -eq 4; then echo \"Switching copy...\"; setexpr x $bootnum % 2 && setexpr bootnum $x + 1; saveenv; fi; " \ - "run _fpga_loaduser; " \ - "fi;" \ - "echo \"Booting bank $bootnum\" && run userload && run userboot;" \ - "' && " \ - "setenv altbootcmd 'setenv bootnum b && saveenv && boot;' && " \ - "saveenv && saveenv && boot;" - #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Environment settings */ @@ -108,7 +95,4 @@ /* The rest of the configuration is shared */ #include <configs/socfpga_common.h> -#undef CONFIG_WATCHDOG_TIMEOUT_MSECS -#define CONFIG_WATCHDOG_TIMEOUT_MSECS 60000 - #endif /* __CONFIG_SOCFPGA_SECU1_H__ */ diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 31f95f5..155aece 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -187,10 +187,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4) #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #endif -#else -#ifndef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1 -#endif #endif /* SPL QSPI boot support */ diff --git a/include/configs/socfpga_dbm_soc1.h b/include/configs/socfpga_dbm_soc1.h index 137da2f..8acddbe 100644 --- a/include/configs/socfpga_dbm_soc1.h +++ b/include/configs/socfpga_dbm_soc1.h @@ -12,7 +12,6 @@ /* Booting Linux */ #define CONFIG_BOOTFILE "fitImage" -#define CONFIG_BOOTCOMMAND "run mmc_mmc" /* Environment is in MMC */ diff --git a/include/configs/socfpga_mcvevk.h b/include/configs/socfpga_mcvevk.h index 1456214..3aa231c 100644 --- a/include/configs/socfpga_mcvevk.h +++ b/include/configs/socfpga_mcvevk.h @@ -12,7 +12,6 @@ /* Booting Linux */ #define CONFIG_BOOTFILE "fitImage" -#define CONFIG_BOOTCOMMAND "run mmc_mmc" /* Environment is in MMC */ diff --git a/include/configs/socfpga_soc64_common.h b/include/configs/socfpga_soc64_common.h index 4d7072c..928582a 100644 --- a/include/configs/socfpga_soc64_common.h +++ b/include/configs/socfpga_soc64_common.h @@ -60,7 +60,6 @@ /* Flash device info */ #ifndef CONFIG_SPL_BUILD -#define CONFIG_MTD_PARTITIONS #define MTDIDS_DEFAULT "nor0=ff705000.spi.0" #endif /* CONFIG_SPL_BUILD */ @@ -148,7 +147,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void); * L4 Watchdog */ #ifndef CONFIG_SPL_BUILD -#undef CONFIG_HW_WATCHDOG #undef CONFIG_DESIGNWARE_WATCHDOG #endif #define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS diff --git a/include/configs/socfpga_vining_fpga.h b/include/configs/socfpga_vining_fpga.h index d9d0a4a..d767492 100644 --- a/include/configs/socfpga_vining_fpga.h +++ b/include/configs/socfpga_vining_fpga.h @@ -12,7 +12,6 @@ /* Booting Linux */ #define CONFIG_BOOTFILE "fitImage" -#define CONFIG_BOOTCOMMAND "run selboot" #define CONFIG_SYS_BOOTM_LEN 0x2000000 /* 32 MiB */ /* Extra Environment */ diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 454dbd3..15e93d0 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -38,10 +38,6 @@ * in the README.mpc85xxads. */ -#ifndef CONFIG_SYS_CLK_FREQ -#define CONFIG_SYS_CLK_FREQ 66666666 -#endif - /* * These can be toggled for performance analysis, otherwise use default. */ @@ -97,11 +93,6 @@ #define CONFIG_SYS_LBC_FLASH_BASE CONFIG_SYS_FLASH1 /* Localbus flash start */ #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_LBC_FLASH_BASE /* start of FLASH */ -#define CONFIG_SYS_BR0_PRELIM 0xfe001001 /* port size 16bit */ -#define CONFIG_SYS_OR0_PRELIM 0xfe000030 /* 32MB Flash */ -#define CONFIG_SYS_BR1_PRELIM 0xfc001001 /* port size 16bit */ -#define CONFIG_SYS_OR1_PRELIM 0xfe000030 /* 32MB Flash */ - #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 256 /* sectors per device */ #undef CONFIG_SYS_FLASH_CHECKSUM @@ -128,8 +119,6 @@ #define CONFIG_SYS_FPGA_BASE 0xc0000000 #define CONFIG_SYS_FPGA_SIZE 0x00100000 /* 1 MB */ #define CONFIG_SYS_HMI_BASE 0xc0010000 -#define CONFIG_SYS_BR3_PRELIM 0xc0001881 /* UPMA, 32-bit */ -#define CONFIG_SYS_OR3_PRELIM 0xfff00000 /* 1 MB */ #define CONFIG_SYS_NAND_BASE (CONFIG_SYS_FPGA_BASE + 0x70) #define CONFIG_SYS_MAX_NAND_DEVICE 1 @@ -137,8 +126,6 @@ /* LIME GDC */ #define CONFIG_SYS_LIME_BASE 0xc8000000 #define CONFIG_SYS_LIME_SIZE 0x04000000 /* 64 MB */ -#define CONFIG_SYS_BR2_PRELIM 0xc80018a1 /* UPMB, 32-bit */ -#define CONFIG_SYS_OR2_PRELIM 0xfc000000 /* 64 MB */ #define CONFIG_SYS_SPD_BUS_NUM 0 @@ -190,8 +177,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -#undef CONFIG_WATCHDOG /* watchdog disabled */ - /* * Miscellaneous configurable options */ @@ -258,7 +243,6 @@ "bootm ${kernel_addr_r} - ${fdt_addr};" \ "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ "" -#define CONFIG_BOOTCOMMAND "run boot_nor" /* pass open firmware flat tree */ diff --git a/include/configs/somlabs_visionsom_6ull.h b/include/configs/somlabs_visionsom_6ull.h index a2fe547..768e33d 100644 --- a/include/configs/somlabs_visionsom_6ull.h +++ b/include/configs/somlabs_visionsom_6ull.h @@ -53,19 +53,6 @@ "run setrootmmc; " \ "run setloadmmc; " \ -#define CONFIG_BOOTCOMMAND \ - "run setfdtfile; " \ - "run checkbootdev; " \ - "run loadfdt;" \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run setbootargs; " \ - "bootz ${loadaddr} - ${fdt_addr}; " \ - "fi; " \ - "fi" - /* Miscellaneous configurable options */ /* Physical Memory Map */ diff --git a/include/configs/stemmy.h b/include/configs/stemmy.h index e5571b2..96e759d 100644 --- a/include/configs/stemmy.h +++ b/include/configs/stemmy.h @@ -14,6 +14,7 @@ * bootloader. New images are loaded at the same address for compatibility. */ #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_BOOTM_LEN SZ_64M /* FIXME: This should be loaded from device tree... */ #define CONFIG_SYS_L2_PL310 diff --git a/include/configs/stmark2.h b/include/configs/stmark2.h index 0a4cd84..18a57f2 100644 --- a/include/configs/stmark2.h +++ b/include/configs/stmark2.h @@ -17,11 +17,6 @@ #define CONFIG_TIMESTAMP -#define CONFIG_BOOTCOMMAND \ - "sf probe 0:1 50000000; " \ - "sf read ${loadaddr} 0x100000 ${kern_size}; " \ - "bootm ${loadaddr}" - #define CONFIG_EXTRA_ENV_SETTINGS \ "kern_size=0x700000\0" \ "loadaddr=0x40001000\0" \ @@ -46,9 +41,6 @@ #define CONFIG_RTC_MCFRRTC #define CONFIG_SYS_MCFRRTC_BASE 0xFC0A8000 -/* spi not partitions */ -#define CONFIG_JFFS2_DEV "nor0" - /* Timer */ #define CONFIG_MCFTMR diff --git a/include/configs/stout.h b/include/configs/stout.h index a1e7e86..df2d967 100644 --- a/include/configs/stout.h +++ b/include/configs/stout.h @@ -39,8 +39,6 @@ #define CONFIG_BITBANGMII_MULTI /* Board Clock */ -#define RMOBILE_XTAL_CLK 20000000u -#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h index d380884..dd94216 100644 --- a/include/configs/stv0991.h +++ b/include/configs/stv0991.h @@ -34,8 +34,6 @@ /* Misc configuration */ -#define CONFIG_BOOTCOMMAND "go 0x40040000" - /* + * QSPI support + */ diff --git a/include/configs/synquacer.h b/include/configs/synquacer.h index 3d099b4..0409589 100644 --- a/include/configs/synquacer.h +++ b/include/configs/synquacer.h @@ -41,15 +41,11 @@ #define CONFIG_SYS_FLASH_BASE (0x08000000) #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} -#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + (512 * 1024)) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + PHYS_SDRAM_SIZE) - #define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SYS_MAXARGS 128 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Since U-Boot 64bit PCIe support is limited, disable 64bit MMIO support */ -/* #define CONFIG_SYS_PCI_64BIT 1 */ #define DEFAULT_DFU_ALT_INFO "dfu_alt_info=" \ "mtd nor1=u-boot.bin raw 200000 100000;" \ diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h deleted file mode 100644 index a47e2c5..0000000 --- a/include/configs/tam3517-common.h +++ /dev/null @@ -1,281 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2011 - * Stefano Babic, DENX Software Engineering, sbabic@denx.de. - * - * Copyright (C) 2009 TechNexion Ltd. - */ - -#ifndef __TAM3517_H -#define __TAM3517_H - -/* - * High Level Configuration Options - */ - -#include <asm/arch/cpu.h> /* get chip and board defs */ -#include <asm/arch/omap.h> - -/* Clock Defines */ -#define V_OSCK 26000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) - -/* - * DDR related - */ -#define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024) - -/* - * Hardware drivers - */ - -/* - * NS16550 Configuration - */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ - -/* - * select serial console configuration - */ -#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 - -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ - 115200} - -#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 - -/* - * Board NAND Info. - */ -#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ - /* to access */ - /* nand at CS0 */ - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ - /* NAND devices */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ - -#define CONFIG_SYS_MAXARGS 32 /* max number of command */ - /* args */ - -/* - * AM3517 has 12 GP timers, they can be driven by the system clock - * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). - * This rate is divided by a local divisor. - */ -#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ - -/* - * Physical Memory Map - */ -#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 - -/* - * FLASH and environment organization - */ - -/* **** PISMO SUPPORT *** */ - -/* Redundant Environment */ -#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -/* - * ethernet support, EMAC - * - */ -#define CONFIG_NET_RETRY_COUNT 10 - -/* Defines for SPL */ -#define CONFIG_SPL_CONSOLE -#define CONFIG_SPL_NAND_SOFTECC -#define CONFIG_SPL_NAND_WORKSPACE 0x8f07f000 /* below BSS */ - -#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ - CONFIG_SPL_TEXT_BASE) -#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK - -#define CONFIG_SYS_SPL_MALLOC_START 0x8f000000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_BSS_START_ADDR 0x8f080000 /* end of RAM */ -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 - -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" - -/* FAT */ -#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" -#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" - -/* RAW SD card / eMMC */ -#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900 /* address 0x120000 */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */ - -/* NAND boot config */ -#define CONFIG_SYS_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47,\ - 48, 49, 50, 51, 52, 53, 54, 55,\ - 56, 57, 58, 59, 60, 61, 62, 63} -#define CONFIG_SYS_NAND_ECCSIZE 256 -#define CONFIG_SYS_NAND_ECCBYTES 3 - -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE - -#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 - -/* Setup MTD for NAND on the SOM */ - -#define CONFIG_TAM3517_SETTINGS \ - "netdev=eth0\0" \ - "nandargs=setenv bootargs root=${nandroot} " \ - "rootfstype=${nandrootfstype}\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip_sta=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ - "addip=if test -n ${ipdyn};then run addip_dyn;" \ - "else run addip_sta;fi\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "addtty=setenv bootargs ${bootargs}" \ - " console=ttyO0,${baudrate}\0" \ - "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ - "loadaddr=82000000\0" \ - "kernel_addr_r=82000000\0" \ - "hostname=" CONFIG_HOSTNAME "\0" \ - "bootfile=" CONFIG_HOSTNAME "/uImage\0" \ - "flash_self=run ramargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr}\0" \ - "nandboot=run nandargs addip addtty addmtd addmisc;" \ - "nand read ${kernel_addr_r} kernel\0" \ - "bootm ${kernel_addr_r}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ - "run nfsargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr_r}\0" \ - "net_self=if run net_self_load;then " \ - "run ramargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr_r} ${ramdisk_addr_r};" \ - "else echo Images not loades;fi\0" \ - "u-boot=" CONFIG_HOSTNAME "/u-boot.img\0" \ - "load=tftp ${loadaddr} ${u-boot}\0" \ - "loadmlo=tftp ${loadaddr} ${mlo}\0" \ - "mlo=" CONFIG_HOSTNAME "/MLO\0" \ - "uboot_addr=0x80000\0" \ - "update=nandecc sw;nand erase ${uboot_addr} 100000;" \ - "nand write ${loadaddr} ${uboot_addr} 80000\0" \ - "updatemlo=nandecc hw;nand erase 0 20000;" \ - "nand write ${loadaddr} 0 20000\0" \ - "upd=if run load;then echo Updating u-boot;if run update;" \ - "then echo U-Boot updated;" \ - "else echo Error updating u-boot !;" \ - "echo Board without bootloader !!;" \ - "fi;" \ - "else echo U-Boot not downloaded..exiting;fi\0" \ - -/* - * this is common code for all TAM3517 boards. - * MAC address is stored from manufacturer in - * I2C EEPROM - */ -#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) -/* - * The I2C EEPROM on the TAM3517 contains - * mac address and production data - */ -struct tam3517_module_info { - char customer[48]; - char product[48]; - - /* - * bit 0~47 : sequence number - * bit 48~55 : week of year, from 0. - * bit 56~63 : year - */ - unsigned long long sequence_number; - - /* - * bit 0~7 : revision fixed - * bit 8~15 : revision major - * bit 16~31 : TNxxx - */ - unsigned int revision; - unsigned char eth_addr[4][8]; - unsigned char _rev[100]; -}; - -#define TAM3517_READ_EEPROM(info, ret) \ -do { \ - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); \ - if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, \ - (void *)info, sizeof(*info))) \ - ret = 1; \ - else \ - ret = 0; \ -} while (0) - -#define TAM3517_READ_MAC_FROM_EEPROM(info) \ -do { \ - char buf[80], ethname[20]; \ - int i; \ - memset(buf, 0, sizeof(buf)); \ - for (i = 0 ; i < ARRAY_SIZE((info)->eth_addr); i++) { \ - sprintf(buf, "%02X:%02X:%02X:%02X:%02X:%02X", \ - (info)->eth_addr[i][5], \ - (info)->eth_addr[i][4], \ - (info)->eth_addr[i][3], \ - (info)->eth_addr[i][2], \ - (info)->eth_addr[i][1], \ - (info)->eth_addr[i][0]); \ - \ - if (i) \ - sprintf(ethname, "eth%daddr", i); \ - else \ - strcpy(ethname, "ethaddr"); \ - printf("Setting %s from EEPROM with %s\n", ethname, buf);\ - env_set(ethname, buf); \ - } \ -} while (0) - -/* The following macros are taken from Technexion's documentation */ -#define TAM3517_sequence_number(info) \ - ((info)->sequence_number % 0x1000000000000LL) -#define TAM3517_week_of_year(info) (((info)->sequence_number >> 48) % 0x100) -#define TAM3517_year(info) ((info)->sequence_number >> 56) -#define TAM3517_revision_fixed(info) ((info)->revision % 0x100) -#define TAM3517_revision_major(info) (((info)->revision >> 8) % 0x100) -#define TAM3517_revision_tn(info) ((info)->revision >> 16) - -#define TAM3517_PRINT_SOM_INFO(info) \ -do { \ - printf("Vendor:%s\n", (info)->customer); \ - printf("SOM: %s\n", (info)->product); \ - printf("SeqNr: %02llu%02llu%012llu\n", \ - TAM3517_year(info), \ - TAM3517_week_of_year(info), \ - TAM3517_sequence_number(info)); \ - printf("Rev: TN%u %u.%u\n", \ - TAM3517_revision_tn(info), \ - TAM3517_revision_major(info), \ - TAM3517_revision_fixed(info)); \ -} while (0) - -#endif - -#endif /* __TAM3517_H */ diff --git a/include/configs/tec.h b/include/configs/tec.h index aa9665e..432ccbd 100644 --- a/include/configs/tec.h +++ b/include/configs/tec.h @@ -19,7 +19,6 @@ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE /* NAND support */ -#define CONFIG_TEGRA_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Environment in NAND, aligned to start of last sector */ diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 673056c..99b7bd0 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -12,7 +12,6 @@ /* * High Level Configuration Options */ -#define CONFIG_SYS_L2CACHE_OFF /* No L2 cache */ #include <asm/arch/tegra.h> /* get chip and board defs */ diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h index 063213c..fac8692 100644 --- a/include/configs/tegra20-common.h +++ b/include/configs/tegra20-common.h @@ -79,6 +79,4 @@ */ #define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10 -#define CONFIG_SYS_NAND_SELF_INIT - #endif /* _TEGRA20_COMMON_H_ */ diff --git a/include/configs/theadorable-x86-common.h b/include/configs/theadorable-x86-common.h index 193c6c3..eaa19ee 100644 --- a/include/configs/theadorable-x86-common.h +++ b/include/configs/theadorable-x86-common.h @@ -22,7 +22,6 @@ /* Environment settings */ -#undef CONFIG_BOOTCOMMAND #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/thuban.h b/include/configs/thuban.h index d45ff7d..3b12007 100644 --- a/include/configs/thuban.h +++ b/include/configs/thuban.h @@ -50,24 +50,6 @@ #ifndef CONFIG_RESTORE_FLASH /* set to negative value for no autoboot */ - -#define CONFIG_BOOTCOMMAND \ -"if dfubutton; then " \ - "run dfu_start; " \ - "reset; " \ -"fi;" \ -"run nand_boot;" \ -"run nand_boot_backup;" \ -"reset;" - -#else - -#define CONFIG_BOOTCOMMAND \ - "setenv autoload no; " \ - "dhcp; " \ - "if tftp 80000000 debrick.scr; then " \ - "source 80000000; " \ - "fi" #endif #endif /* CONFIG_SPL_BUILD */ #endif /* ! __CONFIG_THUBAN_H */ diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index ee63ce3..0f786ab 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -56,22 +56,6 @@ "bootm ${loadaddr}\0" \ "fdtfile=ti814x-evm.dtb\0" \ -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "echo SD/MMC found on device ${mmcdev};" \ - "if run loadbootenv; then " \ - "echo Loaded environment from ${bootenv};" \ - "run importbootenv;" \ - "fi;" \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run loaduimage; then " \ - "run mmcboot;" \ - "fi;" \ - "fi;" \ - /* Clock Defines */ #define V_OSCK 24000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index fa99152..533673b 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -17,11 +17,6 @@ "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ -#define CONFIG_BOOTCOMMAND \ - "mmc rescan;" \ - "fatload mmc 0 ${loadaddr} uImage;" \ - "bootm ${loadaddr}" \ - /* Clock Defines */ #define V_OSCK 24000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK >> 1) @@ -32,7 +27,6 @@ /** * Platform/Board specific defs */ -#define CONFIG_SYS_CLK_FREQ 27000000 #define CONFIG_SYS_TIMERBASE 0x4802E000 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h index 8b0dd49..4a329bf 100644 --- a/include/configs/ti_armv7_keystone2.h +++ b/include/configs/ti_armv7_keystone2.h @@ -205,24 +205,6 @@ "mtdparts=mtdparts=davinci_nand.0:" \ "1024k(bootloader)ro,512k(params)ro,-(ubifs)\0" -#ifndef CONFIG_BOOTCOMMAND -#ifndef CONFIG_TI_SECURE_DEVICE -#define CONFIG_BOOTCOMMAND \ - "run init_${boot}; " \ - "run get_mon_${boot} run_mon; " \ - "run get_kern_${boot}; " \ - "run init_fw_rd_${boot}; " \ - "run get_fdt_${boot}; " \ - "run run_kern" -#else -#define CONFIG_BOOTCOMMAND \ - "run run_mon_hs; " \ - "run init_${boot}; " \ - "run get_fit_${boot}; " \ - "bootm ${addr_fit}#${name_fdt}" -#endif -#endif - /* Now for the remaining common defines */ #include <configs/ti_armv7_common.h> diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index 055d108..270ef95 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -170,10 +170,6 @@ "exit; " \ "fi; " \ -#define FASTBOOT_CMD \ - "echo Booting into fastboot ...; " \ - "fastboot " __stringify(CONFIG_FASTBOOT_USB_DEV) "; " - #define DEFAULT_COMMON_BOOT_TI_ARGS \ "console=" CONSOLEDEV ",115200n8\0" \ "fdtfile=undefined\0" \ @@ -195,7 +191,7 @@ "if bcb test command = bootonce-bootloader; then " \ "echo Android: Bootloader boot...; " \ "bcb clear command; bcb store; " \ - FASTBOOT_CMD \ + "fastboot 1; " \ "exit; " \ "elif bcb test command = boot-recovery; then " \ "echo Android: Recovery boot...; " \ @@ -260,21 +256,6 @@ "if test $fdtfile = undefined; then " \ "echo WARNING: Could not determine device tree to use; fi; \0" -#define CONFIG_BOOTCOMMAND \ - "if test ${dofastboot} -eq 1; then " \ - "echo Boot fastboot requested, resetting dofastboot ...;" \ - "setenv dofastboot 0; saveenv;" \ - FASTBOOT_CMD \ - "fi;" \ - "if test ${boot_fit} -eq 1; then " \ - "run update_to_fit;" \ - "fi;" \ - "run findfdt; " \ - "run finduuid; " \ - "run distro_bootcmd;" \ - "run emmc_android_boot; " \ - "" - #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(MMC, mmc, 1) \ diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h index 88bb4a8..ba6c3f0 100644 --- a/include/configs/topic_miami.h +++ b/include/configs/topic_miami.h @@ -94,9 +94,4 @@ EXTRA_ENV_USB \ DFU_ALT_INFO -#undef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND "if mmcinfo; then " \ - "if fatload mmc 0 0x1900000 ${bootscript}; then source 0x1900000; " \ - "fi; fi; run $modeboot" - #endif /* __CONFIG_TOPIC_MIAMI_H */ diff --git a/include/configs/total_compute.h b/include/configs/total_compute.h index 933a145..c752da3 100644 --- a/include/configs/total_compute.h +++ b/include/configs/total_compute.h @@ -47,27 +47,6 @@ * without verification (for development purposes). * Else boot FIT image. */ -#define CONFIG_BOOTCOMMAND \ - "if part number mmc 0 vbmeta is_avb; then" \ - " echo MMC with vbmeta partition detected.;" \ - " echo starting Android Verified boot.;" \ - " avb init 0; " \ - " if avb verify; then " \ - " set bootargs $bootargs $avb_bootargs; " \ - " part start mmc 0 boot boot_start; " \ - " part size mmc 0 boot boot_size; " \ - " mmc read ${load_addr} ${boot_start} ${boot_size}; " \ - " bootm ${load_addr} ${load_addr} ${fdt_addr_r}; " \ - " else; " \ - " echo AVB verification failed.; " \ - " exit; " \ - " fi; " \ - "elif part number mmc 0 system is_non_avb_android; then " \ - " booti ${kernel_addr_r} ${initrd_addr_r} ${fdt_addr_r};" \ - "else;" \ - " echo Booting FIT image.;" \ - " bootm ${load_addr} ${load_addr} ${fdt_addr_r}; " \ - "fi;" /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ diff --git a/include/configs/tplink_wdr4300.h b/include/configs/tplink_wdr4300.h index e6dc9f1..4d5b470 100644 --- a/include/configs/tplink_wdr4300.h +++ b/include/configs/tplink_wdr4300.h @@ -25,9 +25,6 @@ */ #define CONFIG_SYS_NS16550_CLK 40000000 -#define CONFIG_BOOTCOMMAND \ - "dhcp 192.168.1.1:wdr4300.fit && bootm $loadaddr" - /* * Command */ diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h index 233031b..633b100 100644 --- a/include/configs/tqma6.h +++ b/include/configs/tqma6.h @@ -119,9 +119,6 @@ "fi; fi; " \ "setenv filesize; setenv blkc \0" \ -#define CONFIG_BOOTCOMMAND \ - "run mmcboot; run netboot; run panicboot" - #elif defined(CONFIG_TQMA6X_SPI_BOOT) #define TQMA6_UBOOT_OFFSET 0x400 @@ -205,11 +202,7 @@ "setexpr offset ${fdt_start} * " \ __stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \ "sf read ${fdt_addr} ${offset} ${size}; " \ - "setenv size ; setenv offset\0" \ - -#define CONFIG_BOOTCOMMAND \ - "sf probe; run mmcboot; run netboot; run panicboot" \ - + "setenv size ; setenv offset\0" #else #error "need to define boot source" diff --git a/include/configs/trats.h b/include/configs/trats.h index 396e9f2..5217400 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -15,7 +15,6 @@ #define CONFIG_TIZEN /* TIZEN lib */ -#define CONFIG_SYS_L2CACHE_OFF #ifndef CONFIG_SYS_L2CACHE_OFF #define CONFIG_SYS_L2_PL310 #define CONFIG_SYS_PL310_BASE 0x10502000 @@ -26,8 +25,6 @@ #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE #define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */ -#define CONFIG_BOOTCOMMAND "run autoboot" - #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ - GENERATED_GBL_DATA_SIZE) diff --git a/include/configs/trats2.h b/include/configs/trats2.h index 114dd8e..8d4b782 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -14,7 +14,6 @@ #define CONFIG_TIZEN /* TIZEN lib */ -#define CONFIG_SYS_L2CACHE_OFF #ifndef CONFIG_SYS_L2CACHE_OFF #define CONFIG_SYS_L2_PL310 #define CONFIG_SYS_PL310_BASE 0x10502000 @@ -25,8 +24,6 @@ #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE #define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */ -#define CONFIG_BOOTCOMMAND "run autoboot" - #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \ - GENERATED_GBL_DATA_SIZE) diff --git a/include/configs/ulcb.h b/include/configs/ulcb.h index 1ce844f..bdd6b4b 100644 --- a/include/configs/ulcb.h +++ b/include/configs/ulcb.h @@ -23,7 +23,6 @@ #define CONFIG_FLASH_SHOW_PROGRESS 45 #define CONFIG_SYS_FLASH_QUIET_TEST #define CONFIG_SYS_FLASH_BANKS_LIST { 0x08000000 } -#define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 #define CONFIG_SYS_MAX_FLASH_SECT 256 diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index dbd4a00..fb7b83d 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -79,11 +79,6 @@ #endif #define CONFIG_ROOTPATH "/nfs/root/path" -#define NFSBOOTCOMMAND \ - "setenv bootargs $bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \ - "run __nfsboot" #ifdef CONFIG_FIT #define CONFIG_BOOTFILE "fitImage" @@ -203,6 +198,4 @@ #define CONFIG_SPL_PAD_TO 0x20000 -#define CONFIG_SYS_PCI_64BIT - #endif /* __CONFIG_UNIPHIER_H__ */ diff --git a/include/configs/usb_a9263.h b/include/configs/usb_a9263.h index 49895e7..ffa6900 100644 --- a/include/configs/usb_a9263.h +++ b/include/configs/usb_a9263.h @@ -63,7 +63,6 @@ #endif /* bootstrap + u-boot + env + linux in dataflash on CS0 */ -#define CONFIG_BOOTCOMMAND "nboot 21000000 0" #define CONFIG_EXTRA_ENV_SETTINGS \ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ diff --git a/include/configs/usbarmory.h b/include/configs/usbarmory.h index 6f5a1c8..0faa656 100644 --- a/include/configs/usbarmory.h +++ b/include/configs/usbarmory.h @@ -10,8 +10,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_SYS_FSL_CLK - #include <asm/arch/imx-regs.h> /* U-Boot environment */ @@ -36,12 +34,6 @@ /* Linux boot */ #define CONFIG_HOSTNAME "usbarmory" -#define CONFIG_BOOTCOMMAND \ - "run distro_bootcmd; " \ - "setenv bootargs console=${console} ${bootargs_default}; " \ - "ext2load mmc 0:1 ${kernel_addr_r} /boot/zImage; " \ - "ext2load mmc 0:1 ${fdt_addr_r} /boot/${fdtfile}; " \ - "bootz ${kernel_addr_r} - ${fdt_addr_r}" #define BOOT_TARGET_DEVICES(func) func(MMC, mmc, 0) diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h index 7fbec27..17583c0 100644 --- a/include/configs/verdin-imx8mm.h +++ b/include/configs/verdin-imx8mm.h @@ -11,8 +11,6 @@ #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -103,7 +101,6 @@ /* USDHC */ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 /* ENET */ #define CONFIG_ETHPRIME "FEC" diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8.h index df22584..54e8cae 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8.h @@ -4,36 +4,39 @@ * configurations. */ -#ifndef __VEXPRESS_AEMV8A_H -#define __VEXPRESS_AEMV8A_H +#ifndef __VEXPRESS_AEMV8_H +#define __VEXPRESS_AEMV8_H + +#include <linux/stringify.h> #define CONFIG_REMAKE_ELF /* Link Definitions */ -#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP +#ifdef CONFIG_TARGET_VEXPRESS64_JUNO +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) +#else /* ATF loads u-boot here for BASE_FVP model */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000) -#elif CONFIG_TARGET_VEXPRESS64_JUNO -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) #endif #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ /* CS register bases for the original memory map. */ -#define V2M_PA_CS0 0x00000000 -#define V2M_PA_CS1 0x14000000 -#define V2M_PA_CS2 0x18000000 -#define V2M_PA_CS3 0x1c000000 -#define V2M_PA_CS4 0x0c000000 -#define V2M_PA_CS5 0x10000000 +#define V2M_BASE 0x80000000 +#define V2M_PA_BASE 0x00000000 + +#define V2M_PA_CS0 (V2M_PA_BASE + 0x00000000) +#define V2M_PA_CS1 (V2M_PA_BASE + 0x14000000) +#define V2M_PA_CS2 (V2M_PA_BASE + 0x18000000) +#define V2M_PA_CS3 (V2M_PA_BASE + 0x1c000000) +#define V2M_PA_CS4 (V2M_PA_BASE + 0x0c000000) +#define V2M_PA_CS5 (V2M_PA_BASE + 0x10000000) #define V2M_PERIPH_OFFSET(x) (x << 16) #define V2M_SYSREGS (V2M_PA_CS3 + V2M_PERIPH_OFFSET(1)) #define V2M_SYSCTL (V2M_PA_CS3 + V2M_PERIPH_OFFSET(2)) #define V2M_SERIAL_BUS_PCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(3)) -#define V2M_BASE 0x80000000 - /* Common peripherals relative to CS7. */ #define V2M_AACI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(4)) #define V2M_MMCI (V2M_PA_CS3 + V2M_PERIPH_OFFSET(5)) @@ -72,23 +75,23 @@ /* Generic Interrupt Controller Definitions */ #ifdef CONFIG_GICV3 -#define GICD_BASE (0x2f000000) -#define GICR_BASE (0x2f100000) +#define GICD_BASE (V2M_PA_BASE + 0x2f000000) +#define GICR_BASE (V2M_PA_BASE + 0x2f100000) #else -#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP -#define GICD_BASE (0x2f000000) -#define GICC_BASE (0x2c000000) -#elif CONFIG_TARGET_VEXPRESS64_JUNO +#ifdef CONFIG_TARGET_VEXPRESS64_JUNO #define GICD_BASE (0x2C010000) #define GICC_BASE (0x2C02f000) +#else +#define GICD_BASE (V2M_PA_BASE + 0x2f000000) +#define GICC_BASE (V2M_PA_BASE + 0x2c000000) #endif #endif /* !CONFIG_GICV3 */ -#ifndef CONFIG_TARGET_VEXPRESS64_JUNO -/* The Vexpress64 simulators use SMSC91C111 */ +#if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) && !defined(CONFIG_DM_ETH) +/* The Vexpress64 BASE_FVP simulator uses SMSC91C111 */ #define CONFIG_SMC91111 1 -#define CONFIG_SMC91111_BASE (0x01A000000) +#define CONFIG_SMC91111_BASE (V2M_PA_BASE + 0x01A000000) #endif /* PL011 Serial Configuration */ @@ -113,7 +116,7 @@ #ifdef CONFIG_TARGET_VEXPRESS64_JUNO #define PHYS_SDRAM_2 (0x880000000) #define PHYS_SDRAM_2_SIZE 0x180000000 -#elif CONFIG_TARGET_VEXPRESS64_BASE_FVP && CONFIG_NR_DRAM_BANKS == 2 +#elif CONFIG_NR_DRAM_BANKS == 2 #define PHYS_SDRAM_2 (0x880000000) #define PHYS_SDRAM_2_SIZE 0x80000000 #endif @@ -171,35 +174,22 @@ BOOTENV #elif CONFIG_TARGET_VEXPRESS64_BASE_FVP + +#define VEXPRESS_KERNEL_ADDR 0x80080000 +#define VEXPRESS_FDT_ADDR 0x8fc00000 +#define VEXPRESS_BOOT_ADDR 0x8fd00000 +#define VEXPRESS_RAMDISK_ADDR 0x8fe00000 + #define CONFIG_EXTRA_ENV_SETTINGS \ "kernel_name=Image\0" \ - "kernel_addr=0x80080000\0" \ - "initrd_name=ramdisk.img\0" \ - "initrd_addr=0x88000000\0" \ - "fdtfile=devtree.dtb\0" \ - "fdt_addr=0x83000000\0" \ - "boot_name=boot.img\0" \ - "boot_addr=0x8007f800\0" - -#ifndef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND "if smhload ${boot_name} ${boot_addr}; then " \ - " set bootargs; " \ - " abootimg addr ${boot_addr}; " \ - " abootimg get dtb --index=0 fdt_addr; " \ - " bootm ${boot_addr} ${boot_addr} " \ - " ${fdt_addr}; " \ - "else; " \ - " set fdt_high 0xffffffffffffffff; " \ - " set initrd_high 0xffffffffffffffff; " \ - " smhload ${kernel_name} ${kernel_addr}; " \ - " smhload ${fdtfile} ${fdt_addr}; " \ - " smhload ${initrd_name} ${initrd_addr} "\ - " initrd_end; " \ - " fdt addr ${fdt_addr}; fdt resize; " \ - " fdt chosen ${initrd_addr} ${initrd_end}; " \ - " booti $kernel_addr - $fdt_addr; " \ - "fi" -#endif + "kernel_addr_r=" __stringify(VEXPRESS_KERNEL_ADDR) "\0" \ + "ramdisk_name=ramdisk.img\0" \ + "ramdisk_addr_r=" __stringify(VEXPRESS_RAMDISK_ADDR) "\0" \ + "fdtfile=devtree.dtb\0" \ + "fdt_addr_r=" __stringify(VEXPRESS_FDT_ADDR) "\0" \ + "boot_name=boot.img\0" \ + "boot_addr_r=" __stringify(VEXPRESS_BOOT_ADDR) "\0" + #endif /* Monitor Command Prompt */ @@ -213,7 +203,7 @@ /* Store environment at top of flash in the same location as blank.img */ /* in the Juno firmware. */ #else -#define CONFIG_SYS_FLASH_BASE 0x0C000000 +#define CONFIG_SYS_FLASH_BASE (V2M_PA_BASE + 0x0C000000) /* 256 x 256KiB sectors */ #define CONFIG_SYS_MAX_FLASH_SECT 256 /* Store environment at top of flash */ @@ -230,4 +220,4 @@ #define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */ #define FLASH_MAX_SECTOR_SIZE 0x00040000 -#endif /* __VEXPRESS_AEMV8A_H */ +#endif /* __VEXPRESS_AEMV8_H */ diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h index 990f5ed..91d50bc 100644 --- a/include/configs/vexpress_common.h +++ b/include/configs/vexpress_common.h @@ -109,8 +109,6 @@ /* Board info register */ #define SYS_ID V2M_SYSREGS -#define CONFIG_SYS_L2CACHE_OFF 1 - #define SCTL_BASE V2M_SYSCTL #define VEXPRESS_FLASHPROG_FLVPPEN (1 << 0) diff --git a/include/configs/veyron.h b/include/configs/veyron.h index 2ab6d6c..ce9441d 100644 --- a/include/configs/veyron.h +++ b/include/configs/veyron.h @@ -13,6 +13,4 @@ #include <configs/rk3288_common.h> -#define CONFIG_KEYBOARD - #endif diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index 6ec39a0..d90c2fa 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -11,8 +11,6 @@ #include <asm/arch/imx-regs.h> #include <linux/stringify.h> -#define CONFIG_SYS_FSL_CLK - /* NAND support */ #ifdef CONFIG_CMD_NAND @@ -127,18 +125,6 @@ "bootz; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - /* Miscellaneous configurable options */ /* Physical memory map */ diff --git a/include/configs/vinco.h b/include/configs/vinco.h index b353c37..7bd4882 100644 --- a/include/configs/vinco.h +++ b/include/configs/vinco.h @@ -34,13 +34,11 @@ #ifdef CONFIG_CMD_SF #define CONFIG_ATMEL_SPI0 -#define CONFIG_SPI_FLASH_STMICRO #endif /* MMC */ #ifdef CONFIG_CMD_MMC -#define CONFIG_GENERIC_ATMEL_MCI #define ATMEL_BASE_MMCI 0xfc000000 #define CONFIG_SYS_MMC_CLK_OD 500000 @@ -60,11 +58,6 @@ /* Use our own mapping for the VInCo platform */ /* Update the bootcommand according to our mapping for the VInCo platform */ -#undef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND "mmc dev 0 0;" \ - "mmc read ${loadaddr} ${k_offset} ${k_blksize};" \ - "mmc read ${oftaddr} ${dtb_offset} ${dtb_blksize};" \ - "bootz ${loadaddr} - ${oftaddr}" #define CONFIG_EXTRA_ENV_SETTINGS \ "kernel_start=0x20000\0" \ diff --git a/include/configs/vocore2.h b/include/configs/vocore2.h index 58888d4..c60da8a 100644 --- a/include/configs/vocore2.h +++ b/include/configs/vocore2.h @@ -30,7 +30,6 @@ #define CONFIG_SYS_NS16550_CLK 40000000 #define CONFIG_SYS_NS16550_REG_SIZE -4 #define CONFIG_SYS_NS16550_COM3 0xb0000e00 -#define CONFIG_CONS_INDEX 3 /* RAM */ diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index ece762e..051c18c 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -32,7 +32,6 @@ #define CONFIG_MXC_USB_FLAGS 0 /* Framebuffer */ -#define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX_HDMI #define CONFIG_IMX_VIDEO_SKIP diff --git a/include/configs/warp.h b/include/configs/warp.h index 11a9b31..8bdda37 100644 --- a/include/configs/warp.h +++ b/include/configs/warp.h @@ -117,17 +117,4 @@ "bootz; " \ "fi;\0" -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev};" \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" - #endif /* __CONFIG_H */ diff --git a/include/configs/warp7.h b/include/configs/warp7.h index 00031d8..83ee178 100644 --- a/include/configs/warp7.h +++ b/include/configs/warp7.h @@ -16,7 +16,6 @@ /* MMC Config*/ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR #define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 #define CONFIG_DFU_ENV_SETTINGS \ "dfu_alt_info=boot raw 0x2 0x1000 mmcpart 1\0" \ @@ -40,12 +39,12 @@ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ "fdt_file=imx7s-warp.dtb\0" \ - "fdt_addr=" __stringify(CONFIG_SYS_FDT_ADDR)"\0" \ + "fdt_addr=0x83000000\0" \ "fdtovaddr=0x83100000\0" \ "boot_fdt=try\0" \ "ip_dyn=yes\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "rootpart=" __stringify(CONFIG_WARP7_ROOT_PART) "\0" \ "finduuid=part uuid mmc 0:${rootpart} uuid\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ @@ -83,19 +82,6 @@ "bootz; " \ "fi;\0" \ -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev};" \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "run do_bootscript_hab;" \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "fi; " \ - "fi; " \ - "fi" - /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h index a45d3b4..a43fd81 100644 --- a/include/configs/work_92105.h +++ b/include/configs/work_92105.h @@ -55,7 +55,6 @@ */ /* driver configuration */ -#define CONFIG_SYS_NAND_SELF_INIT #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_MAX_NAND_CHIPS 1 #define CONFIG_SYS_NAND_BASE MLC_NAND_BASE @@ -64,8 +63,6 @@ * GPIO */ -#define CONFIG_LPC32XX_GPIO - /* * Environment */ diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index 486b5ca..394978b 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -14,8 +14,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_PHYSMEM - #define CONFIG_SYS_BOOTM_LEN (16 << 20) /* SATA AHCI storage */ @@ -39,11 +37,6 @@ */ #define CONFIG_SYS_NS16550_PORT_MAPPED -#ifndef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND \ - "ext2load scsi 0:3 01000000 /boot/vmlinuz; zboot 01000000" -#endif - /* * Miscellaneous configurable options */ @@ -88,9 +81,14 @@ #define DISTRO_BOOTENV #endif +#ifndef SPLASH_SETTINGS +#define SPLASH_SETTINGS +#endif + #define CONFIG_EXTRA_ENV_SETTINGS \ DISTRO_BOOTENV \ CONFIG_STD_DEVICES_SETTINGS \ + SPLASH_SETTINGS \ "pciconfighost=1\0" \ "netdev=eth0\0" \ "consoledev=ttyS0\0" \ @@ -101,21 +99,4 @@ "ramdiskfile=initramfs.gz\0" -#define RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftpboot $kernel_addr_r $bootfile;" \ - "tftpboot $ramdisk_addr_r $ramdiskfile;" \ - "zboot $kernel_addr_r 0 $ramdisk_addr_r $filesize" - -#define NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftpboot $kernel_addr_r $bootfile;" \ - "zboot $kernel_addr_r" - - #endif /* __CONFIG_H */ diff --git a/include/configs/xea.h b/include/configs/xea.h index 5081cc8..aa48bb9 100644 --- a/include/configs/xea.h +++ b/include/configs/xea.h @@ -29,10 +29,6 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (SZ_32K / 0x200) #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR (SZ_1M / 0x200) -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SPI_FLASH_MTD -#endif - /* Memory configuration */ #define PHYS_SDRAM_1 0x40000000 /* Base address */ #define PHYS_SDRAM_1_SIZE 0x10000000 /* Max 256 MB RAM */ @@ -42,7 +38,6 @@ /* Booting Linux */ #define CONFIG_BOOTFILE "uImage" -#define CONFIG_BOOTCOMMAND "run ${bootpri} ; run ${bootsec}" /* Extra Environment */ #define CONFIG_HOSTNAME "xea" diff --git a/include/configs/xenguest_arm64.h b/include/configs/xenguest_arm64.h index c5e3d16..408c7b5 100644 --- a/include/configs/xenguest_arm64.h +++ b/include/configs/xenguest_arm64.h @@ -11,17 +11,8 @@ #define CONFIG_EXTRA_ENV_SETTINGS -#undef CONFIG_NR_DRAM_BANKS #undef CONFIG_SYS_SDRAM_BASE -#define CONFIG_NR_DRAM_BANKS 1 - -/* - * This can be any arbitrary address as we are using PIE, but - * please note, that CONFIG_SYS_TEXT_BASE must match the below. - */ -#define CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE CONFIG_SYS_LOAD_ADDR - /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SYS_MAXARGS 64 @@ -29,8 +20,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_OF_SYSTEM_SETUP - #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ "loadimage=ext4load pvblock 0 0x90000000 /boot/Image;\0" \ diff --git a/include/configs/xilinx_versal.h b/include/configs/xilinx_versal.h index 4348645..03539a4 100644 --- a/include/configs/xilinx_versal.h +++ b/include/configs/xilinx_versal.h @@ -26,8 +26,6 @@ #endif /* Serial setup */ -#define CONFIG_CPU_ARMV8 - #define CONFIG_SYS_BAUDRATE_TABLE \ { 4800, 9600, 19200, 38400, 57600, 115200 } diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index e214805..f4b7f30 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -26,8 +26,6 @@ #endif /* Serial setup */ -#define CONFIG_CPU_ARMV8 - #define CONFIG_SYS_BAUDRATE_TABLE \ { 4800, 9600, 19200, 38400, 57600, 115200 } @@ -39,10 +37,6 @@ # define CONFIG_SYS_MAX_NAND_DEVICE 1 #endif -#if defined(CONFIG_SPL_BUILD) -#define CONFIG_ZYNQMP_PSU_INIT_ENABLED -#endif - /* Miscellaneous configurable options */ #if defined(CONFIG_ZYNQMP_USB) diff --git a/include/configs/xilinx_zynqmp_mini.h b/include/configs/xilinx_zynqmp_mini.h index c106443..c3c8b4c 100644 --- a/include/configs/xilinx_zynqmp_mini.h +++ b/include/configs/xilinx_zynqmp_mini.h @@ -15,7 +15,6 @@ #include <configs/xilinx_zynqmp.h> /* Undef unneeded configs */ -#undef CONFIG_BOOTCOMMAND #undef CONFIG_EXTRA_ENV_SETTINGS #undef CONFIG_SYS_INIT_SP_ADDR diff --git a/include/configs/xilinx_zynqmp_r5.h b/include/configs/xilinx_zynqmp_r5.h index 6d5b81e..3ec99e0 100644 --- a/include/configs/xilinx_zynqmp_r5.h +++ b/include/configs/xilinx_zynqmp_r5.h @@ -8,9 +8,6 @@ #define CONFIG_EXTRA_ENV_SETTINGS -/* CPU clock */ -#define CONFIG_CPU_FREQ_HZ 500000000 - /* Serial drivers */ /* The following table includes the supported baudrates */ #define CONFIG_SYS_BAUDRATE_TABLE \ diff --git a/include/configs/xpress.h b/include/configs/xpress.h index f6645a7..6d621f2 100644 --- a/include/configs/xpress.h +++ b/include/configs/xpress.h @@ -48,8 +48,6 @@ #define CONFIG_FEC_XCV_TYPE RMII #define CONFIG_ETHPRIME "FEC" -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #define CONFIG_UBOOT_SECTOR_START 0x2 #define CONFIG_UBOOT_SECTOR_COUNT 0x3fe @@ -64,7 +62,7 @@ "boot_fdt=try\0" \ "ip_dyn=yes\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ diff --git a/include/configs/xtfpga.h b/include/configs/xtfpga.h index ccc90a6..c8a6e9a 100644 --- a/include/configs/xtfpga.h +++ b/include/configs/xtfpga.h @@ -22,9 +22,6 @@ #define CONFIG_XTFPGA -/* FPGA CPU freq after init */ -#define CONFIG_SYS_CLK_FREQ (gd->cpu_clk) - /*===================*/ /* RAM Layout */ /*===================*/ @@ -169,7 +166,7 @@ #define CONFIG_SYS_NS16550_COM1 IOADDR(0x0D050020) /* Base address */ /* Input clk to NS16550 (in Hz; the SYS_CLK_FREQ is in kHz) */ -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_CLK_FREQ +#define CONFIG_SYS_NS16550_CLK get_board_sys_clk() /*======================*/ /* Ethernet Driver Info */ diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 4de2f94..88c6490 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -9,15 +9,9 @@ #ifndef __CONFIG_ZYNQ_COMMON_H #define __CONFIG_ZYNQ_COMMON_H -/* CPU clock */ -#ifndef CONFIG_CPU_FREQ_HZ -# define CONFIG_CPU_FREQ_HZ 800000000 -#endif - #define CONFIG_REMAKE_ELF /* Cache options */ -#define CONFIG_SYS_L2CACHE_OFF #ifndef CONFIG_SYS_L2CACHE_OFF # define CONFIG_SYS_L2_PL310 # define CONFIG_SYS_PL310_BASE 0xf8f02000 diff --git a/include/dm/device.h b/include/dm/device.h index f790041..cf785f7 100644 --- a/include/dm/device.h +++ b/include/dm/device.h @@ -593,7 +593,7 @@ int device_get_child(const struct udevice *parent, int index, struct udevice **devp); /** - * device_get_child_count() - Get the available child count of a device + * device_get_child_count() - Get the child count of a device * * Returns the number of children to a device. * @@ -602,6 +602,15 @@ int device_get_child(const struct udevice *parent, int index, int device_get_child_count(const struct udevice *parent); /** + * device_get_decendent_count() - Get the total number of decendents of a device + * + * Returns the total number of decendents, including all children + * + * @parent: Parent device to check + */ +int device_get_decendent_count(const struct udevice *parent); + +/** * device_find_child_by_seq() - Find a child device based on a sequence * * This searches for a device with the given seq. @@ -763,6 +772,18 @@ int device_find_first_child_by_uclass(const struct udevice *parent, * * @parent: Parent device to search * @name: Name to look for + * @len: Length of the name + * @devp: Returns device found, if any + * @return 0 if found, else -ENODEV + */ +int device_find_child_by_namelen(const struct udevice *parent, const char *name, + int len, struct udevice **devp); + +/** + * device_find_child_by_name() - Find a child by device name + * + * @parent: Parent device to search + * @name: Name to look for * @devp: Returns device found, if any * @return 0 if found, else -ENODEV */ diff --git a/include/dm/of_extra.h b/include/dm/of_extra.h index f0d2054..c2498aa 100644 --- a/include/dm/of_extra.h +++ b/include/dm/of_extra.h @@ -114,4 +114,18 @@ int ofnode_decode_memory_region(ofnode config_node, const char *mem_type, */ bool ofnode_phy_is_fixed_link(ofnode eth_node, ofnode *phy_node); +/** + * ofnode_eth_uses_inband_aneg() - Detect whether MAC should use in-band autoneg + * + * This function detects whether the Ethernet controller should use IEEE 802.3 + * clause 37 in-band autonegotiation for serial protocols such as 1000base-x, + * SGMII, USXGMII, etc. The property is relevant when the Ethernet controller + * is connected to an on-board PHY or an SFP cage, and is not relevant when it + * has a fixed link (in that case, in-band autoneg should not be used). + * + * @param eth_node ofnode belonging to the Ethernet controller + * @return true if in-band autoneg should be used, false otherwise + */ +bool ofnode_eth_uses_inband_aneg(ofnode eth_node); + #endif diff --git a/include/dm/ofnode.h b/include/dm/ofnode.h index 0f680e5..6601bd8 100644 --- a/include/dm/ofnode.h +++ b/include/dm/ofnode.h @@ -590,11 +590,11 @@ int ofnode_stringlist_search(ofnode node, const char *propname, * * @node: node to check * @propname: name of the property containing the string list - * @index: index of the string to return + * @index: index of the string to return (cannot be negative) * @lenp: return location for the string length or an error code on failure * * @return: - * length of string, if found or -ve error value if not found + * 0 if found or -ve error value if not found */ int ofnode_read_string_index(ofnode node, const char *propname, int index, const char **outp); @@ -610,6 +610,26 @@ int ofnode_read_string_index(ofnode node, const char *propname, int index, int ofnode_read_string_count(ofnode node, const char *property); /** + * ofnode_read_string_list() - read a list of strings + * + * This produces a list of string pointers with each one pointing to a string + * in the string list. If the property does not exist, it returns {NULL}. + * + * The data is allocated and the caller is reponsible for freeing the return + * value (the list of string pointers). The strings themselves may not be + * changed as they point directly into the devicetree property. + * + * @node: node to check + * @listp: returns an allocated, NULL-terminated list of strings if the return + * value is > 0, else is set to NULL + * @return number of strings in list, 0 if none, -ENOMEM if out of memory, + * -EINVAL if no such property, -EENODATA if property is empty + * @return: NULL-terminated list of strings (NULL if no property or empty) + */ +int ofnode_read_string_list(ofnode node, const char *property, + const char ***listp); + +/** * ofnode_parse_phandle_with_args() - Find a node pointed by phandle in a list * * This function is useful to parse lists of phandles and their arguments. diff --git a/include/dm/pinctrl.h b/include/dm/pinctrl.h index 695e78a..8b869c4 100644 --- a/include/dm/pinctrl.h +++ b/include/dm/pinctrl.h @@ -495,7 +495,7 @@ int pinctrl_generic_set_state(struct udevice *pctldev, struct udevice *config); static inline int pinctrl_generic_set_state(struct udevice *pctldev, struct udevice *config) { - return -EINVAL; + return -ENOSYS; } #endif @@ -512,7 +512,7 @@ int pinctrl_select_state(struct udevice *dev, const char *statename); static inline int pinctrl_select_state(struct udevice *dev, const char *statename) { - return -EINVAL; + return -ENOSYS; } #endif diff --git a/include/dm/read.h b/include/dm/read.h index 890bf3d..75c6ad6 100644 --- a/include/dm/read.h +++ b/include/dm/read.h @@ -371,6 +371,27 @@ int dev_read_string_index(const struct udevice *dev, const char *propname, * number of strings in the list, or -ve error value if not found */ int dev_read_string_count(const struct udevice *dev, const char *propname); + +/** + * dev_read_string_list() - read a list of strings + * + * This produces a list of string pointers with each one pointing to a string + * in the string list. If the property does not exist, it returns {NULL}. + * + * The data is allocated and the caller is reponsible for freeing the return + * value (the list of string pointers). The strings themselves may not be + * changed as they point directly into the devicetree property. + * + * @dev: device to examine + * @propname: name of the property containing the string list + * @listp: returns an allocated, NULL-terminated list of strings if the return + * value is > 0, else is set to NULL + * @return number of strings in list, 0 if none, -ENOMEM if out of memory, + * -ENOENT if no such property + */ +int dev_read_string_list(const struct udevice *dev, const char *propname, + const char ***listp); + /** * dev_read_phandle_with_args() - Find a node pointed by phandle in a list * @@ -906,6 +927,13 @@ static inline int dev_read_string_count(const struct udevice *dev, return ofnode_read_string_count(dev_ofnode(dev), propname); } +static inline int dev_read_string_list(const struct udevice *dev, + const char *propname, + const char ***listp) +{ + return ofnode_read_string_list(dev_ofnode(dev), propname, listp); +} + static inline int dev_read_phandle_with_args(const struct udevice *dev, const char *list_name, const char *cells_name, int cell_count, int index, struct ofnode_phandle_args *out_args) diff --git a/include/dm/root.h b/include/dm/root.h index 42510b1..780f269 100644 --- a/include/dm/root.h +++ b/include/dm/root.h @@ -131,4 +131,12 @@ int dm_remove_devices_flags(uint flags); static inline int dm_remove_devices_flags(uint flags) { return 0; } #endif +/** + * dm_get_stats() - Get some stats for driver mode + * + * @device_countp: Returns total number of devices that are bound + * @uclass_countp: Returns total number of uclasses in use + */ +void dm_get_stats(int *device_countp, int *uclass_countp); + #endif diff --git a/include/dm/uclass-internal.h b/include/dm/uclass-internal.h index 57c664c..fb0edcc 100644 --- a/include/dm/uclass-internal.h +++ b/include/dm/uclass-internal.h @@ -243,6 +243,17 @@ int uclass_find_device_by_phandle(enum uclass_id id, struct udevice *parent, */ int uclass_bind_device(struct udevice *dev); +#if CONFIG_IS_ENABLED(DM_DEVICE_REMOVE) +/** + * uclass_pre_unbind_device() - Prepare to deassociate device with a uclass + * + * Call any handled needed before uclass_unbind_device() is called + * + * @dev: Pointer to the device + * #return 0 on success, -ve on error + */ +int uclass_pre_unbind_device(struct udevice *dev); + /** * uclass_unbind_device() - Deassociate device with a uclass * @@ -251,9 +262,10 @@ int uclass_bind_device(struct udevice *dev); * @dev: Pointer to the device * #return 0 on success, -ve on error */ -#if CONFIG_IS_ENABLED(DM_DEVICE_REMOVE) int uclass_unbind_device(struct udevice *dev); + #else +static inline int uclass_pre_unbind_device(struct udevice *dev) { return 0; } static inline int uclass_unbind_device(struct udevice *dev) { return 0; } #endif @@ -295,6 +307,13 @@ static inline int uclass_pre_remove_device(struct udevice *dev) { return 0; } #endif /** + * uclass_get_count() - Get the number of uclasses + * + * Returns the number of uclasses instantiated in driver model + */ +int uclass_get_count(void); + +/** * uclass_find() - Find uclass by its id * * @id: Id to serach for diff --git a/include/dm/uclass.h b/include/dm/uclass.h index 15e5f9e..f1fd2ba 100644 --- a/include/dm/uclass.h +++ b/include/dm/uclass.h @@ -176,6 +176,15 @@ const char *uclass_get_name(enum uclass_id id); * uclass_get_by_name() - Look up a uclass by its driver name * * @name: Name to look up + * @len: Length of name + * @returns the associated uclass ID, or UCLASS_INVALID if not found + */ +enum uclass_id uclass_get_by_name_len(const char *name, int len); + +/** + * uclass_get_by_name() - Look up a uclass by its driver name + * + * @name: Name to look up * @returns the associated uclass ID, or UCLASS_INVALID if not found */ enum uclass_id uclass_get_by_name(const char *name); @@ -417,6 +426,14 @@ int uclass_first_device_drvdata(enum uclass_id id, ulong driver_data, int uclass_probe_all(enum uclass_id id); /** + * uclass_id_count() - Count the number of devices in a uclass + * + * @id: uclass ID to look up + * @return number of devices in that uclass (0 if none) + */ +int uclass_id_count(enum uclass_id id); + +/** * uclass_id_foreach_dev() - Helper function to iteration through devices * * This creates a for() loop which works through the available devices in diff --git a/include/dt-bindings/clock/bcm2835.h b/include/dt-bindings/clock/bcm2835.h index 2cec01f..b60c034 100644 --- a/include/dt-bindings/clock/bcm2835.h +++ b/include/dt-bindings/clock/bcm2835.h @@ -58,3 +58,5 @@ #define BCM2835_CLOCK_DSI1E 48 #define BCM2835_CLOCK_DSI0P 49 #define BCM2835_CLOCK_DSI1P 50 + +#define BCM2711_CLOCK_EMMC2 51 diff --git a/include/efi.h b/include/efi.h index 1432038..877a2e5 100644 --- a/include/efi.h +++ b/include/efi.h @@ -400,15 +400,37 @@ static inline struct efi_mem_desc *efi_get_next_mem_desc( return (struct efi_mem_desc *)((ulong)desc + map->desc_size); } +/** + * struct efi_priv - Information about the environment provided by EFI + * + * @parent_image: image passed into the EFI app or stub + * @sys_table: Pointer to system table + * @boot: Pointer to boot-services table + * @run: Pointer to runtime-services table + * + * @use_pool_for_malloc: true if all allocation should go through the EFI 'pool' + * methods allocate_pool() and free_pool(); false to use 'pages' methods + * allocate_pages() and free_pages() + * @ram_base: Base address of RAM (size CONFIG_EFI_RAM_SIZE) + * @image_data_type: Type of the loaded image (e.g. EFI_LOADER_CODE) + * + * @info: Header of the info list, holding info collected by the stub and passed + * to U-Boot + * @info_size: Size of the info list @info in bytes + * @next_hdr: Pointer to where to put the next header when adding to the list + */ struct efi_priv { efi_handle_t parent_image; - struct efi_device_path *device_path; struct efi_system_table *sys_table; struct efi_boot_services *boot; struct efi_runtime_services *run; + + /* app: */ bool use_pool_for_malloc; unsigned long ram_base; unsigned int image_data_type; + + /* stub: */ struct efi_info_hdr *info; unsigned int info_size; void *next_hdr; @@ -419,10 +441,12 @@ struct efi_priv { * * @handle: handle of the controller on which this driver is installed * @blkio: block io protocol proxied by this driver + * @device_path: EFI path to the device */ struct efi_media_plat { - efi_handle_t handle; - struct efi_block_io *blkio; + efi_handle_t handle; + struct efi_block_io *blkio; + struct efi_device_path *device_path; }; /* Base address of the EFI image */ @@ -451,6 +475,27 @@ extern char _binary_u_boot_bin_start[], _binary_u_boot_bin_end[]; EFI_VARIABLE_APPEND_WRITE) /** + * efi_get_priv() - Get access to the EFI-private information + * + * This struct it used by both the stub and the app to record things about the + * EFI environment. It is not available in U-Boot proper after the stub has + * jumped there. Use efi_info_get() to obtain info in that case. + * + * Return: pointer to private info + */ +struct efi_priv *efi_get_priv(void); + +/** + * efi_set_priv() - Set up a pointer to the EFI-private information + * + * This is called in the stub and app to record the location of this + * information. + * + * @priv: New location of private data + */ +void efi_set_priv(struct efi_priv *priv); + +/** * efi_get_sys_table() - Get access to the main EFI system table * * @return pointer to EFI system table @@ -521,6 +566,10 @@ void efi_putc(struct efi_priv *priv, const char ch); /** * efi_info_get() - get an entry from an EFI table * + * This function is called from U-Boot proper to read information set up by the + * EFI stub. It can only be used when running from the EFI stub, not when U-Boot + * is running as an app. + * * @type: Entry type to search for * @datap: Returns pointer to entry data * @sizep: Returns pointer to entry size diff --git a/include/efi_api.h b/include/efi_api.h index 80109f0..ec9fa89 100644 --- a/include/efi_api.h +++ b/include/efi_api.h @@ -2035,4 +2035,19 @@ struct efi_firmware_management_protocol { const u16 *package_version_name); }; +#define EFI_DISK_IO_PROTOCOL_GUID \ + EFI_GUID(0xce345171, 0xba0b, 0x11d2, 0x8e, 0x4f, \ + 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b) + +struct efi_disk { + u64 revision; + efi_status_t (EFIAPI *read_disk)(struct efi_disk *this, u32 media_id, + u64 offset, efi_uintn_t buffer_size, + void *buffer); + + efi_status_t (EFIAPI *write_disk)(struct efi_disk *this, u32 media_id, + u64 offset, efi_uintn_t buffer_size, + void *buffer); +}; + #endif diff --git a/include/env.h b/include/env.h index ee5e30d..ff8943e 100644 --- a/include/env.h +++ b/include/env.h @@ -134,6 +134,13 @@ int env_get_f(const char *name, char *buf, unsigned int len); int env_get_yesno(const char *var); /** + * env_get_autostart() - Check if autostart is enabled + * + * @return true if the "autostart" env var exists and is set to "yes" + */ +bool env_get_autostart(void); + +/** * env_set() - set an environment variable * * This sets or deletes the value of an environment variable. For setting the diff --git a/include/env_default.h b/include/env_default.h index 23430dc..21afd7f 100644 --- a/include/env_default.h +++ b/include/env_default.h @@ -10,6 +10,10 @@ #include <env_callback.h> #include <linux/stringify.h> +#ifndef USE_HOSTCC +#include <generated/environment.h> +#endif + #ifdef DEFAULT_ENV_INSTANCE_EMBEDDED env_t embedded_environment __UBOOT_ENV_SECTION__(environment) = { ENV_CRC, /* CRC Sum */ @@ -37,12 +41,6 @@ const char default_environment[] = { #ifdef CONFIG_BOOTCOMMAND "bootcmd=" CONFIG_BOOTCOMMAND "\0" #endif -#ifdef CONFIG_RAMBOOTCOMMAND - "ramboot=" CONFIG_RAMBOOTCOMMAND "\0" -#endif -#ifdef CONFIG_NFSBOOTCOMMAND - "nfsboot=" CONFIG_NFSBOOTCOMMAND "\0" -#endif #if defined(CONFIG_BOOTDELAY) "bootdelay=" __stringify(CONFIG_BOOTDELAY) "\0" #endif @@ -110,6 +108,13 @@ const char default_environment[] = { #if defined(CONFIG_BOOTCOUNT_BOOTLIMIT) && (CONFIG_BOOTCOUNT_BOOTLIMIT > 0) "bootlimit=" __stringify(CONFIG_BOOTCOUNT_BOOTLIMIT)"\0" #endif +#ifdef CONFIG_EXTRA_ENV_TEXT +# ifdef CONFIG_EXTRA_ENV_SETTINGS +# error "Your board uses a text-file environment, so must not define CONFIG_EXTRA_ENV_SETTINGS" +# endif + /* This is created in the Makefile */ + CONFIG_EXTRA_ENV_TEXT +#endif #ifdef CONFIG_EXTRA_ENV_SETTINGS CONFIG_EXTRA_ENV_SETTINGS #endif diff --git a/include/faraday/ftwdt010_wdt.h b/include/faraday/ftwdt010_wdt.h index 20bf6d3..804907d 100644 --- a/include/faraday/ftwdt010_wdt.h +++ b/include/faraday/ftwdt010_wdt.h @@ -16,6 +16,8 @@ #ifndef __FTWDT010_H #define __FTWDT010_H +#include <clock_legacy.h> + struct ftwdt010_wdt { unsigned int wdcounter; /* Counter Reg - 0x00 */ unsigned int wdload; /* Counter Auto Reload Reg - 0x04 */ @@ -82,10 +84,10 @@ struct ftwdt010_wdt { /* * Variable timeout should be set in ms. - * (CONFIG_SYS_CLK_FREQ/1000) equals 1 ms. + * (get_board_sys_clk()/1000) equals 1 ms. * WDLOAD = timeout * TIMEOUT_FACTOR. */ -#define FTWDT010_TIMEOUT_FACTOR (CONFIG_SYS_CLK_FREQ / 1000) /* 1 ms */ +#define FTWDT010_TIMEOUT_FACTOR (get_board_sys_clk() / 1000) /* 1 ms */ void ftwdt010_wdt_reset(void); void ftwdt010_wdt_disable(void); diff --git a/include/fdt_region.h b/include/fdt_region.h index ff7a1cc..d0c6876 100644 --- a/include/fdt_region.h +++ b/include/fdt_region.h @@ -77,6 +77,7 @@ struct fdt_region_state { int max_regions; /* Maximum regions to find */ int can_merge; /* 1 if we can merge with previous region */ int start; /* Start position of current region */ + bool have_node; /* True if any node is included */ struct fdt_region_ptrs ptrs; /* Pointers for what we are up to */ }; diff --git a/include/fdt_simplefb.h b/include/fdt_simplefb.h index 7cc305e..41cd740 100644 --- a/include/fdt_simplefb.h +++ b/include/fdt_simplefb.h @@ -8,6 +8,7 @@ #ifndef _FDT_SIMPLEFB_H_ #define _FDT_SIMPLEFB_H_ -int lcd_dt_simplefb_add_node(void *blob); -int lcd_dt_simplefb_enable_existing_node(void *blob); +int fdt_simplefb_add_node(void *blob); +int fdt_simplefb_enable_existing_node(void *blob); +int fdt_simplefb_enable_and_mem_rsv(void *blob); #endif diff --git a/include/fdt_support.h b/include/fdt_support.h index 88d129c..8ec461a 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -228,6 +228,8 @@ void set_working_fdt_addr(ulong addr); int fdt_shrink_to_minimum(void *blob, uint extrasize); int fdt_increase_size(void *fdt, int add_len); +int fdt_delete_disabled_nodes(void *blob); + int fdt_fixup_nor_flash_size(void *blob); struct node_info; @@ -285,9 +287,13 @@ int fdt_get_dma_range(const void *blob, int node_offset, phys_addr_t *cpu, int fdt_node_offset_by_compat_reg(void *blob, const char *compat, phys_addr_t compat_off); -int fdt_alloc_phandle(void *blob); +int fdt_node_offset_by_pathf(void *blob, const char *fmt, ...) + __attribute__ ((format (printf, 2, 3))); int fdt_set_phandle(void *fdt, int nodeoffset, uint32_t phandle); unsigned int fdt_create_phandle(void *fdt, int nodeoffset); +unsigned int fdt_create_phandle_by_compatible(void *fdt, const char *compat); +unsigned int fdt_create_phandle_by_pathf(void *fdt, const char *fmt, ...) + __attribute__ ((format (printf, 2, 3))); int fdt_add_edid(void *blob, const char *compat, unsigned char *buf); int fdt_verify_alias_address(void *fdt, int anode, const char *alias, @@ -300,38 +306,61 @@ enum fdt_status { FDT_STATUS_OKAY, FDT_STATUS_DISABLED, FDT_STATUS_FAIL, - FDT_STATUS_FAIL_ERROR_CODE, }; -int fdt_set_node_status(void *fdt, int nodeoffset, - enum fdt_status status, unsigned int error_code); +int fdt_set_node_status(void *fdt, int nodeoffset, enum fdt_status status); static inline int fdt_status_okay(void *fdt, int nodeoffset) { - return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_OKAY, 0); + return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_OKAY); } static inline int fdt_status_disabled(void *fdt, int nodeoffset) { - return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_DISABLED, 0); + return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_DISABLED); } static inline int fdt_status_fail(void *fdt, int nodeoffset) { - return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_FAIL, 0); + return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_FAIL); } int fdt_set_status_by_alias(void *fdt, const char *alias, - enum fdt_status status, unsigned int error_code); + enum fdt_status status); static inline int fdt_status_okay_by_alias(void *fdt, const char *alias) { - return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_OKAY, 0); + return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_OKAY); } static inline int fdt_status_disabled_by_alias(void *fdt, const char *alias) { - return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_DISABLED, 0); + return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_DISABLED); } static inline int fdt_status_fail_by_alias(void *fdt, const char *alias) { - return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_FAIL, 0); + return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_FAIL); } +int fdt_set_status_by_compatible(void *fdt, const char *compat, + enum fdt_status status); +static inline int fdt_status_okay_by_compatible(void *fdt, const char *compat) +{ + return fdt_set_status_by_compatible(fdt, compat, FDT_STATUS_OKAY); +} +static inline int fdt_status_disabled_by_compatible(void *fdt, + const char *compat) +{ + return fdt_set_status_by_compatible(fdt, compat, FDT_STATUS_DISABLED); +} +static inline int fdt_status_fail_by_compatible(void *fdt, const char *compat) +{ + return fdt_set_status_by_compatible(fdt, compat, FDT_STATUS_FAIL); +} + +int fdt_set_status_by_pathf(void *fdt, enum fdt_status status, const char *fmt, + ...) __attribute__ ((format (printf, 3, 4))); +#define fdt_status_okay_by_pathf(fdt, fmt, ...) \ + fdt_set_status_by_pathf((fdt), FDT_STATUS_OKAY, (fmt), ##__VA_ARGS__) +#define fdt_status_disabled_by_pathf(fdt, fmt, ...) \ + fdt_set_status_by_pathf((fdt), FDT_STATUS_DISABLED, (fmt), ##__VA_ARGS__) +#define fdt_status_fail_by_pathf(fdt, fmt, ...) \ + fdt_set_status_by_pathf((fdt), FDT_STATUS_FAIL, (fmt), ##__VA_ARGS__) + /* Helper to read a big number; size is in cells (not bytes) */ static inline u64 fdt_read_number(const fdt32_t *cell, int size) { diff --git a/include/fdtdec.h b/include/fdtdec.h index 6c7ab88..09525ce 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -55,6 +55,31 @@ struct bd_info; #define SPL_BUILD 0 #endif +/** + * enum fdt_source_t - indicates where the devicetree came from + * + * These are listed in approximate order of desirability after FDTSRC_NONE + * + * @FDTSRC_SEPARATE: Appended to U-Boot. This is the normal approach if U-Boot + * is the only firmware being booted + * @FDTSRC_FIT: Found in a multi-dtb FIT. This should be used when U-Boot must + * select a devicetree from many options + * @FDTSRC_BOARD: Located by custom board code. This should only be used when + * the prior stage does not support FDTSRC_PASSAGE + * @FDTSRC_EMBED: Embedded into U-Boot executable. This should onyl be used when + * U-Boot is packaged as an ELF file, e.g. for debugging purposes + * @FDTSRC_ENV: Provided by the fdtcontroladdr environment variable. This should + * be used for debugging/development only + * @FDTSRC_NONE: No devicetree at all + */ +enum fdt_source_t { + FDTSRC_SEPARATE, + FDTSRC_FIT, + FDTSRC_BOARD, + FDTSRC_EMBED, + FDTSRC_ENV, +}; + /* * Information about a resource. start is the first address of the resource * and end is the last address (inclusive). The length of the resource will @@ -111,6 +136,20 @@ struct fdt_pci_addr { extern u8 __dtb_dt_begin[]; /* embedded device tree blob */ extern u8 __dtb_dt_spl_begin[]; /* embedded device tree blob for SPL/TPL */ +/* Get a pointer to the embedded devicetree, if there is one, else NULL */ +static inline u8 *dtb_dt_embedded(void) +{ +#ifdef CONFIG_OF_EMBED +# ifdef CONFIG_SPL_BUILD + return __dtb_dt_spl_begin; +# else + return __dtb_dt_begin; +# endif +#else + return NULL; +#endif +} + /** * Compute the size of a resource. * @@ -1156,10 +1195,13 @@ int fdtdec_resetup(int *rescan); /** * Board-specific FDT initialization. Returns the address to a device tree blob. - * Called when CONFIG_OF_BOARD is defined, or if CONFIG_OF_SEPARATE is defined - * and the board implements it. + * + * Called when CONFIG_OF_BOARD is defined. + * + * The existing devicetree is available at gd->fdt_blob * * @err internal error code if we fail to setup a DTB + * @returns new devicetree blob pointer */ void *board_fdt_blob_setup(int *err); @@ -1198,4 +1240,11 @@ int fdtdec_decode_ram_size(const void *blob, const char *area, int board_id, phys_addr_t *basep, phys_size_t *sizep, struct bd_info *bd); +/** + * fdtdec_get_srcname() - Get the name of where the devicetree comes from + * + * @return source name + */ +const char *fdtdec_get_srcname(void); + #endif diff --git a/include/init.h b/include/init.h index f2cd46d..dcd682c 100644 --- a/include/init.h +++ b/include/init.h @@ -14,8 +14,11 @@ #include <linux/types.h> -/* Avoid using CONFIG_EFI_STUB directly as we may boot from other loaders */ -#ifdef CONFIG_EFI_STUB +/* + * In case of the EFI app the UEFI firmware provides the low-level + * initialisation. + */ +#ifdef CONFIG_EFI #define ll_boot_init() false #else #include <asm/global_data.h> diff --git a/include/linux/byteorder/swab.h b/include/linux/byteorder/swab.h index 4334fa7..5efc252 100644 --- a/include/linux/byteorder/swab.h +++ b/include/linux/byteorder/swab.h @@ -39,6 +39,10 @@ (__u64)(((__u64)(x) & (__u64)0x00ff000000000000ULL) >> 40) | \ (__u64)(((__u64)(x) & (__u64)0xff00000000000000ULL) >> 56) )) +#define ___constant_swab16(x) ___swab16(x) +#define ___constant_swab32(x) ___swab32(x) +#define ___constant_swab64(x) ___swab64(x) + /* * provide defaults when no architecture-specific optimization is detected */ diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h new file mode 100644 index 0000000..cbc82f4 --- /dev/null +++ b/include/linux/if_vlan.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * VLAN An implementation of 802.1Q VLAN tagging. + * + * Authors: Ben Greear <greearb@candelatech.com> + */ +#ifndef _LINUX_IF_VLAN_H_ +#define _LINUX_IF_VLAN_H_ + +/** + * struct vlan_ethhdr - vlan ethernet header (ethhdr + vlan_hdr) + * @h_dest: destination ethernet address + * @h_source: source ethernet address + * @h_vlan_proto: ethernet protocol + * @h_vlan_TCI: priority and VLAN ID + * @h_vlan_encapsulated_proto: packet type ID or len + */ +struct vlan_ethhdr { + unsigned char h_dest[ETH_ALEN]; + unsigned char h_source[ETH_ALEN]; + __be16 h_vlan_proto; + __be16 h_vlan_TCI; + __be16 h_vlan_encapsulated_proto; +}; + +#endif /* !(_LINUX_IF_VLAN_H_) */ diff --git a/include/mpc85xx.h b/include/mpc85xx.h index ce6d083..2c69a60 100644 --- a/include/mpc85xx.h +++ b/include/mpc85xx.h @@ -60,8 +60,4 @@ CONFIG_SYS_CCSRBAR_PHYS_LOW and/or CONFIG_SYS_CCSRBAR_PHYS_HIGH instead." #define CONFIG_SYS_CCSRBAR_PHYS ((CONFIG_SYS_CCSRBAR_PHYS_HIGH * 1ull) << 32 | \ CONFIG_SYS_CCSRBAR_PHYS_LOW) -#ifndef CONFIG_SYS_IMMR -#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR -#endif - #endif /* __MPC85xx_H__ */ diff --git a/include/nand.h b/include/nand.h index 09dbda4..70c1286 100644 --- a/include/nand.h +++ b/include/nand.h @@ -10,22 +10,6 @@ #include <config.h> -/* - * All boards using a given driver must convert to self-init - * at the same time, so do it here. When all drivers are - * converted, this will go away. - */ -#ifdef CONFIG_SPL_BUILD -#if defined(CONFIG_NAND_FSL_ELBC) || defined(CONFIG_NAND_FSL_IFC) -#define CONFIG_SYS_NAND_SELF_INIT -#endif -#else -#if defined(CONFIG_NAND_FSL_ELBC) || defined(CONFIG_NAND_ATMEL)\ - || defined(CONFIG_NAND_FSL_IFC) -#define CONFIG_SYS_NAND_SELF_INIT -#endif -#endif - extern void nand_init(void); unsigned long nand_size(void); @@ -34,7 +18,7 @@ unsigned long nand_size(void); int nand_mtd_to_devnum(struct mtd_info *mtd); -#ifdef CONFIG_SYS_NAND_SELF_INIT +#if CONFIG_IS_ENABLED(SYS_NAND_SELF_INIT) void board_nand_init(void); int nand_register(int devnum, struct mtd_info *mtd); #else diff --git a/include/net/dsa.h b/include/net/dsa.h index a339a49..1b1068c 100644 --- a/include/net/dsa.h +++ b/include/net/dsa.h @@ -6,6 +6,7 @@ #ifndef __DSA_H__ #define __DSA_H__ +#include <dm/ofnode.h> #include <phy.h> #include <net.h> @@ -146,6 +147,17 @@ int dsa_set_tagging(struct udevice *dev, ushort headroom, ushort tailroom); struct udevice *dsa_get_master(struct udevice *dev); /** + * dsa_port_get_ofnode() - Return a reference to the given port's OF node + * + * Can be called at driver probe time or later. + * + * @dev: DSA switch udevice pointer + * @port: Port index + * @return OF node reference if OK, NULL on error + */ +ofnode dsa_port_get_ofnode(struct udevice *dev, int port); + +/** * dsa_port_get_pdata() - Helper that returns the platdata of an active * (non-CPU) DSA port device. * diff --git a/include/os.h b/include/os.h index 770d76e..4cbcbd9 100644 --- a/include/os.h +++ b/include/os.h @@ -419,6 +419,15 @@ int os_read_file(const char *name, void **bufp, int *sizep); */ int os_map_file(const char *pathname, int os_flags, void **bufp, int *sizep); +/** + * os_unmap() - Unmap a file previously mapped + * + * @buf: Mapped address + * @size: Size in bytes + * Return: 0 if OK, -ve on error + */ +int os_unmap(void *buf, int size); + /* * os_find_text_base() - Find the text section in this running process * diff --git a/include/pci.h b/include/pci.h index 797f224..6c1094d 100644 --- a/include/pci.h +++ b/include/pci.h @@ -522,6 +522,32 @@ #include <pci_ids.h> +/* + * Enhanced Configuration Access Mechanism (ECAM) + * + * See PCI Express Base Specification, Revision 5.0, Version 1.0, + * Section 7.2.2, Table 7-1, p. 677. + */ +#define PCIE_ECAM_BUS_SHIFT 20 /* Bus number */ +#define PCIE_ECAM_DEV_SHIFT 15 /* Device number */ +#define PCIE_ECAM_FUNC_SHIFT 12 /* Function number */ + +#define PCIE_ECAM_BUS_MASK 0xff +#define PCIE_ECAM_DEV_MASK 0x1f +#define PCIE_ECAM_FUNC_MASK 0x7 +#define PCIE_ECAM_REG_MASK 0xfff /* Limit offset to a maximum of 4K */ + +#define PCIE_ECAM_BUS(x) (((x) & PCIE_ECAM_BUS_MASK) << PCIE_ECAM_BUS_SHIFT) +#define PCIE_ECAM_DEV(x) (((x) & PCIE_ECAM_DEV_MASK) << PCIE_ECAM_DEV_SHIFT) +#define PCIE_ECAM_FUNC(x) (((x) & PCIE_ECAM_FUNC_MASK) << PCIE_ECAM_FUNC_SHIFT) +#define PCIE_ECAM_REG(x) ((x) & PCIE_ECAM_REG_MASK) + +#define PCIE_ECAM_OFFSET(bus, dev, func, where) \ + (PCIE_ECAM_BUS(bus) | \ + PCIE_ECAM_DEV(dev) | \ + PCIE_ECAM_FUNC(func) | \ + PCIE_ECAM_REG(where)) + #ifndef __ASSEMBLY__ #include <dm/pci.h> diff --git a/include/pci_ids.h b/include/pci_ids.h index 7ecedc7..3c5434c 100644 --- a/include/pci_ids.h +++ b/include/pci_ids.h @@ -151,6 +151,9 @@ #define PCI_DEVICE_ID_BERKOM_A4T 0xffa4 #define PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO 0xffa8 +#define PCI_VENDOR_ID_BROADCOM 0x14e4 +#define PCI_DEVICE_ID_NXT_57320 0x16F0 + #define PCI_VENDOR_ID_COMPAQ 0x0e11 #define PCI_DEVICE_ID_COMPAQ_TOKENRING 0x0508 #define PCI_DEVICE_ID_COMPAQ_TACHYON 0xa0fc diff --git a/include/sandboxblockdev.h b/include/sandboxblockdev.h index 4006e94..4ca9554 100644 --- a/include/sandboxblockdev.h +++ b/include/sandboxblockdev.h @@ -6,6 +6,9 @@ #ifndef __SANDBOX_BLOCK_DEV__ #define __SANDBOX_BLOCK_DEV__ +/* Maximum number of host devices - see drivers/block/sandbox.c */ +#define SANDBOX_HOST_MAX_DEVICES 4 + struct host_block_dev { #ifndef CONFIG_BLK struct blk_desc blk_dev; diff --git a/include/scmi_agent.h b/include/scmi_agent.h index f1be9ff..ed40c73 100644 --- a/include/scmi_agent.h +++ b/include/scmi_agent.h @@ -45,9 +45,9 @@ struct scmi_msg { } /** - * scmi_send_and_process_msg() - send and process a SCMI message + * devm_scmi_process_msg() - Send and process an SCMI message * - * Send a message to a SCMI server through a target SCMI agent device. + * Send a message to an SCMI server through a target SCMI agent device. * Caller sets scmi_msg::out_msg_sz to the output message buffer size. * On return, scmi_msg::out_msg_sz stores the response payload size. * diff --git a/include/spi_flash.h b/include/spi_flash.h index 4d4ae89..4566fea 100644 --- a/include/spi_flash.h +++ b/include/spi_flash.h @@ -14,20 +14,6 @@ struct udevice; -/* by default ENV use the same parameters than SF command */ -#ifndef CONFIG_ENV_SPI_BUS -# define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS -#endif -#ifndef CONFIG_ENV_SPI_CS -# define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS -#endif -#ifndef CONFIG_ENV_SPI_MAX_HZ -# define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED -#endif -#ifndef CONFIG_ENV_SPI_MODE -# define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE -#endif - struct spi_slave; struct dm_spi_flash_ops { diff --git a/include/splash.h b/include/splash.h index 7fd2de8..33e45e6 100644 --- a/include/splash.h +++ b/include/splash.h @@ -30,6 +30,7 @@ enum splash_storage { SPLASH_STORAGE_MMC, SPLASH_STORAGE_USB, SPLASH_STORAGE_SATA, + SPLASH_STORAGE_VIRTIO, }; enum splash_flags { diff --git a/include/tee.h b/include/tee.h index 087810b..13f6096 100644 --- a/include/tee.h +++ b/include/tee.h @@ -32,6 +32,25 @@ TEE_PARAM_ATTR_META) /* + * Global Platform login identifiers for tee_open_session_arg::clnt_login + */ +#define TEE_LOGIN_PUBLIC 0x00000000 +#define TEE_LOGIN_USER 0x00000001 +#define TEE_LOGIN_GROUP 0x00000002 +#define TEE_LOGIN_APPLICATION 0x00000004 +#define TEE_LOGIN_APPLICATION_USER 0x00000005 +#define TEE_LOGIN_APPLICATION_GROUP 0x00000006 +/* + * Reserve use of GP implementation specific login method range + * (0x80000000 - 0xBFFFFFFF). This range is rather being used + * for REE kernel clients or TEE implementation. + */ +#define TEE_LOGIN_REE_KERNEL_MIN 0x80000000 +#define TEE_LOGIN_REE_KERNEL_MAX 0xBFFFFFFF +/* Private login method for REE kernel/privileged clients */ +#define TEE_LOGIN_REE_KERNEL 0x80000000 + +/* * Some Global Platform error codes which has a meaning if the * TEE_GEN_CAP_GP bit is returned by the driver in * struct tee_version_data::gen_caps @@ -46,6 +65,7 @@ #define TEE_ERROR_NOT_SUPPORTED 0xffff000a #define TEE_ERROR_COMMUNICATION 0xffff000e #define TEE_ERROR_SECURITY 0xffff000f +#define TEE_ERROR_SHORT_BUFFER 0xffff0010 #define TEE_ERROR_OUT_OF_MEMORY 0xffff000c #define TEE_ERROR_OVERFLOW 0xffff300f #define TEE_ERROR_TARGET_DEAD 0xffff3024 @@ -136,8 +156,8 @@ struct tee_param { /** * struct tee_open_session_arg - extra arguments for tee_open_session() * @uuid: [in] UUID of the Trusted Application - * @clnt_uuid: [in] Normally zeroes - * @clnt_login: [in] Normally 0 + * @clnt_uuid: [in] UUID of client, zeroes for PUBLIC/REE_KERNEL + * @clnt_login: [in] Class of client TEE_LOGIN_* * @session: [out] Session id * @ret: [out] return value * @ret_origin: [out] origin of the return value diff --git a/include/tsec.h b/include/tsec.h index c301c28..72f3485 100644 --- a/include/tsec.h +++ b/include/tsec.h @@ -122,6 +122,8 @@ #define ECNTRL_REDUCED_MII_MODE 0x00000004 #define ECNTRL_SGMII_MODE 0x00000002 +#define RCTRL_PROM 0x00000008 + #ifndef CONFIG_SYS_TBIPA_VALUE # define CONFIG_SYS_TBIPA_VALUE 0x1f #endif diff --git a/include/video.h b/include/video.h index f14fb15..1d75a90 100644 --- a/include/video.h +++ b/include/video.h @@ -30,12 +30,14 @@ struct udevice; * @base: Base address of frame buffer, 0 if not yet known * @copy_base: Base address of a hardware copy of the frame buffer. See * CONFIG_VIDEO_COPY. + * @hide_logo: Hide the logo (used for testing) */ struct video_uc_plat { uint align; uint size; ulong base; ulong copy_base; + bool hide_logo; }; enum video_polarity { @@ -93,7 +95,6 @@ enum video_format { * @colour_bg: Background colour (pixel value) * @flush_dcache: true to enable flushing of the data cache after * the LCD is updated - * @cmap: Colour map for 8-bit-per-pixel displays * @fg_col_idx: Foreground color code (bit 3 = bold, bit 0-2 = color) * @bg_col_idx: Background color code (bit 3 = bold, bit 0-2 = color) */ @@ -118,7 +119,6 @@ struct video_priv { u32 colour_fg; u32 colour_bg; bool flush_dcache; - ushort *cmap; u8 fg_col_idx; u8 bg_col_idx; }; @@ -276,6 +276,13 @@ static inline int video_sync_copy_all(struct udevice *dev) #endif +/** + * video_is_active() - Test if one video device it active + * + * @return true if at least one video device is active, else false. + */ +bool video_is_active(void); + #ifndef CONFIG_DM_VIDEO /* Video functions */ diff --git a/include/virtio.h b/include/virtio.h index a42bdad..34e2bfd 100644 --- a/include/virtio.h +++ b/include/virtio.h @@ -20,6 +20,7 @@ #ifndef __VIRTIO_H__ #define __VIRTIO_H__ +#include <virtio_types.h> #include <linux/bitops.h> #include <linux/bug.h> #define VIRTIO_ID_NET 1 /* virtio net */ |