aboutsummaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/configs/adp-ae3xx.h186
-rw-r--r--include/configs/adp-ag101p.h299
2 files changed, 0 insertions, 485 deletions
diff --git a/include/configs/adp-ae3xx.h b/include/configs/adp-ae3xx.h
deleted file mode 100644
index 7dd2dc4..0000000
--- a/include/configs/adp-ae3xx.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2011 Andes Technology Corporation
- * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
- * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch-ae3xx/ae3xx.h>
-
-/*
- * CPU and Board Configuration Options
- */
-#define CONFIG_USE_INTERRUPT
-
-#define CONFIG_SKIP_TRUNOFF_WATCHDOG
-
-/*
- * Timer
- */
-#define VERSION_CLOCK get_board_sys_clk()
-
-/*
- * Use Externel CLOCK or PCLK
- */
-#undef CONFIG_FTRTC010_EXTCLK
-
-#ifndef CONFIG_FTRTC010_EXTCLK
-#define CONFIG_FTRTC010_PCLK
-#endif
-
-#ifdef CONFIG_FTRTC010_EXTCLK
-#define TIMER_CLOCK 32768 /* CONFIG_FTRTC010_EXTCLK */
-#else
-#define TIMER_CLOCK CONFIG_SYS_HZ /* CONFIG_FTRTC010_PCLK */
-#endif
-
-#define TIMER_LOAD_VAL 0xffffffff
-
-/*
- * Real Time Clock
- */
-#define CONFIG_RTC_FTRTC010
-
-/*
- * Real Time Clock Divider
- * RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ)
- */
-#define OSC_5MHZ (5*1000000)
-#define OSC_CLK (4*OSC_5MHZ)
-#define RTC_DIV_COUNT (0.5) /* Why?? */
-
-/*
- * Serial console configuration
- */
-
-/* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_02_BASE
-#ifndef CONFIG_DM_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE -4
-#endif
-#define CONFIG_SYS_NS16550_CLK ((18432000 * 20) / 25) /* AG101P */
-
-/*
- * Miscellaneous configurable options
- */
-
-/*
- * Size of malloc() pool
- */
-/* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */
-
-/*
- * Physical Memory Map
- */
-#define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */
-
-#define PHYS_SDRAM_1 \
- (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) /* SDRAM Bank #2 */
-
-#define PHYS_SDRAM_0_SIZE 0x20000000 /* 512 MB */
-#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0
-
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \
- GENERATED_GBL_DATA_SIZE)
-
-/*
- * Static memory controller configuration
- */
-#define CONFIG_FTSMC020
-
-#ifdef CONFIG_FTSMC020
-#include <faraday/ftsmc020.h>
-
-#define CONFIG_SYS_FTSMC020_CONFIGS { \
- { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \
- { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \
-}
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT /* FLASH is on BANK 0 */
-#define FTSMC020_BANK0_LOWLV_CONFIG (FTSMC020_BANK_ENABLE | \
- FTSMC020_BANK_SIZE_32M | \
- FTSMC020_BANK_MBW_32)
-
-#define FTSMC020_BANK0_LOWLV_TIMING (FTSMC020_TPR_RBE | \
- FTSMC020_TPR_AST(1) | \
- FTSMC020_TPR_CTW(1) | \
- FTSMC020_TPR_ATI(1) | \
- FTSMC020_TPR_AT2(1) | \
- FTSMC020_TPR_WTC(1) | \
- FTSMC020_TPR_AHT(1) | \
- FTSMC020_TPR_TRNA(1))
-#endif
-
-/*
- * FLASH on ADP_AG101P is connected to BANK0
- * Just disalbe the other BANK to avoid detection error.
- */
-#define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_ENABLE | \
- FTSMC020_BANK_BASE(PHYS_FLASH_1) | \
- FTSMC020_BANK_SIZE_32M | \
- FTSMC020_BANK_MBW_32)
-
-#define FTSMC020_BANK0_TIMING (FTSMC020_TPR_AST(3) | \
- FTSMC020_TPR_CTW(3) | \
- FTSMC020_TPR_ATI(0xf) | \
- FTSMC020_TPR_AT2(3) | \
- FTSMC020_TPR_WTC(3) | \
- FTSMC020_TPR_AHT(3) | \
- FTSMC020_TPR_TRNA(0xf))
-
-#define FTSMC020_BANK1_CONFIG (0x00)
-#define FTSMC020_BANK1_TIMING (0x00)
-#endif /* CONFIG_FTSMC020 */
-
-/*
- * FLASH and environment organization
- */
-/* use CFI framework */
-
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-#define CONFIG_SYS_CFI_FLASH_STATUS_POLL
-
-/* support JEDEC */
-
-/* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */
-#define PHYS_FLASH_1 0x88000000 /* BANK 0 */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, }
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */
-
-/* max number of memory banks */
-/*
- * There are 4 banks supported for this Controller,
- * but we have only 1 bank connected to flash on board
- */
-#define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000}
-
-/* max number of sectors on one chip */
-#define CONFIG_FLASH_SECTOR_SIZE (0x10000*2)
-#define CONFIG_SYS_MAX_FLASH_SECT 512
-
-/* environments */
-
-
-/* SPI FLASH */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 16 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-
-/* Initial Memory map for Linux*/
-#define CONFIG_SYS_BOOTMAPSZ (64 << 20)
-/* Increase max gunzip size */
-#define CONFIG_SYS_BOOTM_LEN (64 << 20)
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h
deleted file mode 100644
index 3766081..0000000
--- a/include/configs/adp-ag101p.h
+++ /dev/null
@@ -1,299 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2011 Andes Technology Corporation
- * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
- * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch-ag101/ag101.h>
-
-/*
- * CPU and Board Configuration Options
- */
-#define CONFIG_USE_INTERRUPT
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_MEM_REMAP
-#endif
-
-/*
- * Timer
- */
-#define VERSION_CLOCK get_board_sys_clk()
-
-/*
- * Use Externel CLOCK or PCLK
- */
-#undef CONFIG_FTRTC010_EXTCLK
-
-#ifndef CONFIG_FTRTC010_EXTCLK
-#define CONFIG_FTRTC010_PCLK
-#endif
-
-#ifdef CONFIG_FTRTC010_EXTCLK
-#define TIMER_CLOCK 32768 /* CONFIG_FTRTC010_EXTCLK */
-#else
-#define TIMER_CLOCK CONFIG_SYS_HZ /* CONFIG_FTRTC010_PCLK */
-#endif
-
-#define TIMER_LOAD_VAL 0xffffffff
-
-/*
- * Real Time Clock
- */
-#define CONFIG_RTC_FTRTC010
-
-/*
- * Real Time Clock Divider
- * RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ)
- */
-#define OSC_5MHZ (5*1000000)
-#define OSC_CLK (4*OSC_5MHZ)
-#define RTC_DIV_COUNT (0.5) /* Why?? */
-
-/*
- * Serial console configuration
- */
-
-/* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_02_BASE
-#ifndef CONFIG_DM_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE -4
-#endif
-#define CONFIG_SYS_NS16550_CLK ((18432000 * 20) / 25) /* AG101P */
-
-/*
- * Miscellaneous configurable options
- */
-
-/*
- * AHB Controller configuration
- */
-#define CONFIG_FTAHBC020S
-
-#ifdef CONFIG_FTAHBC020S
-#include <faraday/ftahbc020s.h>
-
-/* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */
-#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE 0x100
-
-/*
- * CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S,
- * hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote
- * in C language.
- */
-#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \
- (FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) | \
- FTAHBC020S_SLAVE_BSR_SIZE(0xb))
-#endif
-
-/*
- * Watchdog
- */
-#define CONFIG_FTWDT010_WATCHDOG
-
-/*
- * PMU Power controller configuration
- */
-#define CONFIG_PMU
-#define CONFIG_FTPMU010_POWER
-
-#ifdef CONFIG_FTPMU010_POWER
-#include <faraday/ftpmu010.h>
-#define CONFIG_SYS_FTPMU010_PDLLCR0_HCLKOUTDIS 0x0E
-#define CONFIG_SYS_FTPMU010_SDRAMHTC (FTPMU010_SDRAMHTC_EBICTRL_DCSR | \
- FTPMU010_SDRAMHTC_EBIDATA_DCSR | \
- FTPMU010_SDRAMHTC_SDRAMCS_DCSR | \
- FTPMU010_SDRAMHTC_SDRAMCTL_DCSR | \
- FTPMU010_SDRAMHTC_CKE_DCSR | \
- FTPMU010_SDRAMHTC_DQM_DCSR | \
- FTPMU010_SDRAMHTC_SDCLK_DCSR)
-#endif
-
-/*
- * SDRAM controller configuration
- */
-#define CONFIG_FTSDMC021
-
-#ifdef CONFIG_FTSDMC021
-#include <faraday/ftsdmc021.h>
-
-#define CONFIG_SYS_FTSDMC021_TP1 (FTSDMC021_TP1_TRAS(2) | \
- FTSDMC021_TP1_TRP(1) | \
- FTSDMC021_TP1_TRCD(1) | \
- FTSDMC021_TP1_TRF(3) | \
- FTSDMC021_TP1_TWR(1) | \
- FTSDMC021_TP1_TCL(2))
-
-#define CONFIG_SYS_FTSDMC021_TP2 (FTSDMC021_TP2_INI_PREC(4) | \
- FTSDMC021_TP2_INI_REFT(8) | \
- FTSDMC021_TP2_REF_INTV(0x180))
-
-/*
- * CONFIG_SYS_FTSDMC021_CR1: this define is used in lowlevel_init.S,
- * hence we cannot use FTSDMC021_BANK_SIZE(64) since it will use ffs() wrote in
- * C language.
- */
-#define CONFIG_SYS_FTSDMC021_CR1 (FTSDMC021_CR1_DDW(2) | \
- FTSDMC021_CR1_DSZ(3) | \
- FTSDMC021_CR1_MBW(2) | \
- FTSDMC021_CR1_BNKSIZE(6))
-
-#define CONFIG_SYS_FTSDMC021_CR2 (FTSDMC021_CR2_IPREC | \
- FTSDMC021_CR2_IREF | \
- FTSDMC021_CR2_ISMR)
-
-#define CONFIG_SYS_FTSDMC021_BANK0_BASE CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE
-#define CONFIG_SYS_FTSDMC021_BANK0_BSR (FTSDMC021_BANK_ENABLE | \
- CONFIG_SYS_FTSDMC021_BANK0_BASE)
-
-#define CONFIG_SYS_FTSDMC021_BANK1_BASE \
- (CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE + (PHYS_SDRAM_0_SIZE >> 20))
-#define CONFIG_SYS_FTSDMC021_BANK1_BSR (FTSDMC021_BANK_ENABLE | \
- CONFIG_SYS_FTSDMC021_BANK1_BASE)
-#endif
-
-/*
- * Physical Memory Map
- */
-#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-#define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */
-#else
-#ifdef CONFIG_MEM_REMAP
-#define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */
-#else
-#define PHYS_SDRAM_0 0x80000000 /* SDRAM Bank #1 */
-#endif
-#endif
-
-#define PHYS_SDRAM_1 \
- (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) /* SDRAM Bank #2 */
-
-#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-#define PHYS_SDRAM_0_SIZE 0x20000000 /* 512 MB */
-#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */
-#else
-#ifdef CONFIG_MEM_REMAP
-#define PHYS_SDRAM_0_SIZE 0x20000000 /* 512 MB */
-#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */
-#else
-#define PHYS_SDRAM_0_SIZE 0x08000000 /* 128 MB */
-#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
-#endif
-#endif
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0
-
-#ifdef CONFIG_MEM_REMAP
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \
- GENERATED_GBL_DATA_SIZE)
-#else
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
- GENERATED_GBL_DATA_SIZE)
-#endif /* CONFIG_MEM_REMAP */
-
-/*
- * Static memory controller configuration
- */
-#define CONFIG_FTSMC020
-
-#ifdef CONFIG_FTSMC020
-#include <faraday/ftsmc020.h>
-
-#define CONFIG_SYS_FTSMC020_CONFIGS { \
- { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \
- { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \
-}
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT /* FLASH is on BANK 0 */
-#define FTSMC020_BANK0_LOWLV_CONFIG (FTSMC020_BANK_ENABLE | \
- FTSMC020_BANK_SIZE_32M | \
- FTSMC020_BANK_MBW_32)
-
-#define FTSMC020_BANK0_LOWLV_TIMING (FTSMC020_TPR_RBE | \
- FTSMC020_TPR_AST(1) | \
- FTSMC020_TPR_CTW(1) | \
- FTSMC020_TPR_ATI(1) | \
- FTSMC020_TPR_AT2(1) | \
- FTSMC020_TPR_WTC(1) | \
- FTSMC020_TPR_AHT(1) | \
- FTSMC020_TPR_TRNA(1))
-#endif
-
-/*
- * FLASH on ADP_AG101P is connected to BANK0
- * Just disalbe the other BANK to avoid detection error.
- */
-#define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_ENABLE | \
- FTSMC020_BANK_BASE(PHYS_FLASH_1) | \
- FTSMC020_BANK_SIZE_32M | \
- FTSMC020_BANK_MBW_32)
-
-#define FTSMC020_BANK0_TIMING (FTSMC020_TPR_AST(3) | \
- FTSMC020_TPR_CTW(3) | \
- FTSMC020_TPR_ATI(0xf) | \
- FTSMC020_TPR_AT2(3) | \
- FTSMC020_TPR_WTC(3) | \
- FTSMC020_TPR_AHT(3) | \
- FTSMC020_TPR_TRNA(0xf))
-
-#define FTSMC020_BANK1_CONFIG (0x00)
-#define FTSMC020_BANK1_TIMING (0x00)
-#endif /* CONFIG_FTSMC020 */
-
-/*
- * FLASH and environment organization
- */
-/* use CFI framework */
-
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-#define CONFIG_SYS_CFI_FLASH_STATUS_POLL
-
-/* support JEDEC */
-
-/* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */
-#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-#define PHYS_FLASH_1 0x80000000 /* BANK 0 */
-#else
-#ifdef CONFIG_MEM_REMAP
-#define PHYS_FLASH_1 0x80000000 /* BANK 0 */
-#else
-#define PHYS_FLASH_1 0x00000000 /* BANK 0 */
-#endif
-#endif /* CONFIG_MEM_REMAP */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, }
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */
-
-/* max number of memory banks */
-/*
- * There are 4 banks supported for this Controller,
- * but we have only 1 bank connected to flash on board
- */
-#define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000}
-
-/* max number of sectors on one chip */
-#define CONFIG_FLASH_SECTOR_SIZE (0x10000*2)
-#define CONFIG_SYS_MAX_FLASH_SECT 512
-
-/* environments */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 16 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-
-/* Initial Memory map for Linux*/
-#define CONFIG_SYS_BOOTMAPSZ (64 << 20)
-/* Increase max gunzip size */
-#define CONFIG_SYS_BOOTM_LEN (64 << 20)
-
-#endif /* __CONFIG_H */
generated by cgit v1.1 at 2024-11-12 04:27:54 +0000