aboutsummaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/configs/km/keymile-common.h6
-rw-r--r--include/configs/km/km-mpc83xx.h4
-rw-r--r--include/configs/km/km-powerpc.h13
-rw-r--r--include/configs/km/km_arm.h22
-rw-r--r--include/configs/km/kmp204x-common.h15
-rw-r--r--include/configs/km_kirkwood.h22
-rw-r--r--include/configs/kmvect1.h5
7 files changed, 0 insertions, 87 deletions
diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h
index a83782e..3106ef1 100644
--- a/include/configs/km/keymile-common.h
+++ b/include/configs/km/keymile-common.h
@@ -27,12 +27,6 @@
#define CONFIG_LOADS_ECHO
#define CONFIG_SYS_LOADS_BAUD_CHANGE
-
-/* Support the IVM EEprom */
-#define CONFIG_SYS_IVM_EEPROM_ADR 0x50
-#define CONFIG_SYS_IVM_EEPROM_MAX_LEN 0x400
-#define CONFIG_SYS_IVM_EEPROM_PAGE_LEN 0x100
-
/*
* BOOTP options
*/
diff --git a/include/configs/km/km-mpc83xx.h b/include/configs/km/km-mpc83xx.h
index 455e523..c06143c 100644
--- a/include/configs/km/km-mpc83xx.h
+++ b/include/configs/km/km-mpc83xx.h
@@ -3,8 +3,6 @@
*/
#define BOOTFLASH_START 0xF0000000
-#define CONFIG_KM_CONSOLE_TTY "ttyS0"
-
/*
* DDR Setup
*/
@@ -89,8 +87,6 @@
{0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
{1, {I2C_NULL_HOP} } }
-#define CONFIG_KM_IVM_BUS 2 /* I2C2 (Mux-Port 1)*/
-
#if defined(CONFIG_CMD_NAND)
#define CONFIG_NAND_KMETER1
#define CONFIG_SYS_MAX_NAND_DEVICE 1
diff --git a/include/configs/km/km-powerpc.h b/include/configs/km/km-powerpc.h
index 74cd674..20b596f 100644
--- a/include/configs/km/km-powerpc.h
+++ b/include/configs/km/km-powerpc.h
@@ -11,9 +11,6 @@
#define CONFIG_JFFS2_CMDLINE
-/* standard km ethernet_present for piggy */
-#define CONFIG_KM_COMMON_ETH_INIT 1
-
/* EEprom support 24C08, 24C16, 24C64 */
#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 /* 8 Byte write page */
@@ -45,20 +42,10 @@
/* size of rootfs in RAM */
#define CONFIG_KM_ROOTFSSIZE 0x0
-/* pseudo-non volatile RAM [hex] */
-#define CONFIG_KM_PNVRAM 0x80000
-/* physical RAM MTD size [hex] */
-#define CONFIG_KM_PHRAM 0x100000
-/* resereved pram area at the end of memroy [hex] */
-#define CONFIG_KM_RESERVED_PRAM 0x0
/* set the default PRAM value to at least PNVRAM + PHRAM when pram env variable
* is not valid yet, which is the case for when u-boot copies itself to RAM */
#define CONFIG_PRAM ((CONFIG_KM_PNVRAM + CONFIG_KM_PHRAM)>>10)
-#define CONFIG_KM_CRAMFS_ADDR 0xC00000
-#define CONFIG_KM_KERNEL_ADDR 0x400000 /* 7680Kbytes */
-#define CONFIG_KM_FDT_ADDR 0xB80000 /* 512Kbytes */
-
/* architecture specific default bootargs */
#define CONFIG_KM_DEF_BOOT_ARGS_CPU ""
diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h
index 6faff0f..22bd744 100644
--- a/include/configs/km/km_arm.h
+++ b/include/configs/km/km_arm.h
@@ -43,15 +43,6 @@
#define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */
#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
-/* pseudo-non volatile RAM [hex] */
-#define CONFIG_KM_PNVRAM 0x80000
-/* physical RAM MTD size [hex] */
-#define CONFIG_KM_PHRAM 0x17F000
-
-#define CONFIG_KM_CRAMFS_ADDR 0x2400000
-#define CONFIG_KM_KERNEL_ADDR 0x2000000 /* 3098KBytes */
-#define CONFIG_KM_FDT_ADDR 0x23E0000 /* 128KBytes */
-
/* architecture specific default bootargs */
#define CONFIG_KM_DEF_BOOT_ARGS_CPU \
"bootcountaddr=${bootcountaddr} ${mtdparts}" \
@@ -103,13 +94,6 @@
#define BOOTFLASH_START 0x0
-/* Kirkwood has two serial IF */
-#if (CONFIG_CONS_INDEX == 2)
-#define CONFIG_KM_CONSOLE_TTY "ttyS1"
-#else
-#define CONFIG_KM_CONSOLE_TTY "ttyS0"
-#endif
-
/*
* Other required minimal configurations
*/
@@ -124,7 +108,6 @@
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 0
#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
-#define CONFIG_KM_COMMON_ETH_INIT 1 /* standard km ethernet_present for piggy */
/*
* I2C related stuff
@@ -246,11 +229,6 @@ int get_scl(void);
#define CONFIG_SYS_SDRAM_BASE 0x00000000
/* Do early setups now in board_init_f() */
-/*
- * resereved pram area at the end of memroy [hex]
- * 8Mbytes for switch + 4Kbytes for bootcount
- */
-#define CONFIG_KM_RESERVED_PRAM 0x801000
/* address for the bootcount (taken from end of RAM) */
#define BOOTCOUNT_ADDR (CONFIG_KM_RESERVED_PRAM)
diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h
index 3eff380..421a03e 100644
--- a/include/configs/km/kmp204x-common.h
+++ b/include/configs/km/kmp204x-common.h
@@ -113,21 +113,10 @@ unsigned long get_board_sys_clk(unsigned long dummy);
/* size of rootfs in RAM */
#define CONFIG_KM_ROOTFSSIZE 0x0
-/* pseudo-non volatile RAM [hex] */
-#define CONFIG_KM_PNVRAM 0x80000
-/* physical RAM MTD size [hex] */
-#define CONFIG_KM_PHRAM 0x100000
-/* reserved pram area at the end of memory [hex]
- * u-boot reserves some memory for the MP boot page */
-#define CONFIG_KM_RESERVED_PRAM 0x1000
/* set the default PRAM value to at least PNVRAM + PHRAM when pram env variable
* is not valid yet, which is the case for when u-boot copies itself to RAM */
#define CONFIG_PRAM ((CONFIG_KM_PNVRAM + CONFIG_KM_PHRAM)>>10)
-#define CONFIG_KM_CRAMFS_ADDR 0x2000000
-#define CONFIG_KM_KERNEL_ADDR 0x1000000 /* max kernel size 15.5Mbytes */
-#define CONFIG_KM_FDT_ADDR 0x1F80000 /* max dtb size 0.5Mbytes */
-
/*
* Local Bus Definitions
*/
@@ -217,8 +206,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
-#define CONFIG_KM_CONSOLE_TTY "ttyS0"
-
/* I2C */
#define CONFIG_SYS_I2C
@@ -243,8 +230,6 @@ int get_sda(void);
int get_scl(void);
#endif
-#define CONFIG_KM_IVM_BUS 1 /* I2C1 (Mux-Port 1)*/
-
/*
* eSPI - Enhanced SPI
*/
diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h
index d032457..b679701 100644
--- a/include/configs/km_kirkwood.h
+++ b/include/configs/km_kirkwood.h
@@ -24,13 +24,10 @@
#if defined(CONFIG_KM_KIRKWOOD)
#define CONFIG_HOSTNAME "km_kirkwood"
#define CONFIG_KM_DISABLE_PCIE
-#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
/* KM_KIRKWOOD_PCI */
#elif defined(CONFIG_KM_KIRKWOOD_PCI)
#define CONFIG_HOSTNAME "km_kirkwood_pci"
-#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
-#define CONFIG_KM_FPGA_CONFIG 1
#define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048"
#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
@@ -40,11 +37,9 @@
#undef CONFIG_SYS_KWD_CONFIG
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
#define CONFIG_KM_DISABLE_PCIE
-#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
/* KM_NUSA / KM_SUGP1 */
#elif defined(CONFIG_KM_NUSA) || defined(CONFIG_KM_SUGP1)
-#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
# if defined(CONFIG_KM_NUSA)
#define CONFIG_HOSTNAME "kmnusa"
@@ -55,48 +50,31 @@
#undef CONFIG_SYS_KWD_CONFIG
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
-#define CONFIG_KM_ENV_IS_IN_SPI_NOR 1
-#define CONFIG_KM_FPGA_CONFIG 1
-#define CONFIG_KM_PIGGY4_88E6352 1
-#define CONFIG_MV88E6352_SWITCH 1
-#define CONFIG_KM_MVEXTSW_ADDR 0x10
/* KM_MGCOGE3UN */
#elif defined(CONFIG_KM_MGCOGE3UN)
#define CONFIG_HOSTNAME "mgcoge3un"
-#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
#undef CONFIG_SYS_KWD_CONFIG
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-memphis.cfg
#define CONFIG_KM_BOARD_EXTRA_ENV "waitforne=true\0"
-#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3
#define CONFIG_KM_DISABLE_PCIE
-#define CONFIG_KM_PIGGY4_88E6061 1
/* KMCOGE5UN */
#elif defined(CONFIG_KM_COGE5UN)
-#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
#undef CONFIG_SYS_KWD_CONFIG
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg
-#define CONFIG_KM_ENV_IS_IN_SPI_NOR 1
-#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3
#define CONFIG_HOSTNAME "kmcoge5un"
#define CONFIG_KM_DISABLE_PCIE
-#define CONFIG_KM_PIGGY4_88E6352 1
/* KM_PORTL2 */
#elif defined(CONFIG_KM_PORTL2)
#define CONFIG_HOSTNAME "portl2"
-#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
-#define CONFIG_KM_PIGGY4_88E6061 1
/* KM_SUV31 */
#elif defined(CONFIG_KM_SUV31)
-#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
#define CONFIG_HOSTNAME "kmsuv31"
#undef CONFIG_SYS_KWD_CONFIG
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
-#define CONFIG_KM_ENV_IS_IN_SPI_NOR 1
-#define CONFIG_KM_FPGA_CONFIG 1
#define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048"
#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
#else
diff --git a/include/configs/kmvect1.h b/include/configs/kmvect1.h
index 3049521..4a3064d 100644
--- a/include/configs/kmvect1.h
+++ b/include/configs/kmvect1.h
@@ -34,11 +34,6 @@
#define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \
0x0000c000 | \
MxMR_WLFx_2X)
-/*
- * QE UEC ethernet configuration
- */
-#define CONFIG_MV88E6352_SWITCH 1
-#define CONFIG_KM_MVEXTSW_ADDR 0x10
/* ethernet port connected to simple switch 88e6122 (UEC0) */
#define CONFIG_UEC_ETH1
generated by cgit v1.1 at 2024-08-11 12:55:07 +0000