diff options
Diffstat (limited to 'include')
32 files changed, 0 insertions, 73 deletions
diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index 78904ac..d95dd8c 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -58,7 +58,6 @@ #define CONFIG_SYS_I2C_PINMUX_SET (0x000F) #ifdef CONFIG_MCFFEC -# define CONFIG_NET_RETRY_COUNT 5 # define CONFIG_OVERWRITE_ETHADDR_ONCE #endif /* FEC_ENET */ diff --git a/include/configs/am335x_shc.h b/include/configs/am335x_shc.h index 5ed4eb3..7789c1c 100644 --- a/include/configs/am335x_shc.h +++ b/include/configs/am335x_shc.h @@ -168,6 +168,4 @@ #undef CONFIG_DM_MMC #undef CONFIG_TIMER #endif - -#define CONFIG_NET_RETRY_COUNT 10 #endif /* ! __CONFIG_AM335X_SHC_H */ diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 456ed43..393e15e 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -14,9 +14,6 @@ #include <configs/ti_omap3_common.h> -/* Ethernet */ -#define CONFIG_NET_RETRY_COUNT 10 - /* Board NAND Info. */ #ifdef CONFIG_MTD_RAW_NAND #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, 10, \ diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 7bea61e..651eb19 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -145,11 +145,6 @@ #endif -#ifndef CONFIG_SPL_BUILD -/* CPSW Ethernet */ -#define CONFIG_NET_RETRY_COUNT 10 -#endif - #define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */ #define CONFIG_SYS_RX_ETH_BUFFER 64 diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h index ff0498a..c36311e 100644 --- a/include/configs/am57xx_evm.h +++ b/include/configs/am57xx_evm.h @@ -45,7 +45,6 @@ #define CONFIG_HSMMC2_8BIT /* CPSW Ethernet */ -#define CONFIG_NET_RETRY_COUNT 10 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */ /* diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index 995b009..b6d0247 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -66,7 +66,6 @@ #define DM9000_DATA (CONFIG_DM9000_BASE + 4) #define CONFIG_DM9000_USE_16BIT #define CONFIG_DM9000_NO_SROM -#define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_RESET_PHY_R /* USB */ diff --git a/include/configs/bk4r1.h b/include/configs/bk4r1.h index 14b3e52..762d198 100644 --- a/include/configs/bk4r1.h +++ b/include/configs/bk4r1.h @@ -34,9 +34,6 @@ /* Enable PREBOOT variable */ -/* Set ARP_TIMEOUT_COUNT to 3 repetitions */ -#define CONFIG_NET_RETRY_COUNT 5 - /* BK4r1 net init sets GPIO122/PTE17 to enable Ethernet */ #define BK4_NET_INIT "run set_gpio122;" diff --git a/include/configs/bur_cfg_common.h b/include/configs/bur_cfg_common.h index 9d5a038..6985011 100644 --- a/include/configs/bur_cfg_common.h +++ b/include/configs/bur_cfg_common.h @@ -23,9 +23,6 @@ "setcurs 1 10;lcdputs serverip; setcurs 10 10; lcdputs ${serverip};" \ "setenv stdout nc;setenv stdin nc;setenv stderr nc\0" -/* Network defines */ -#define CONFIG_NET_RETRY_COUNT 10 - /* Network console */ /* As stated above, the following choices are optional. */ diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index 9f12c06..a02a180 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -150,7 +150,6 @@ #define CONFIG_FEC_XCV_TYPE RGMII #define IMX_FEC_BASE ENET_BASE_ADDR #define CONFIG_ETHPRIME "FEC0" -#define CONFIG_NET_RETRY_COUNT 5 /* USB */ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index 6cb75e5..b34a5c9 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -50,7 +50,6 @@ #define CONFIG_DM9000_BASE 0x08000000 #define DM9000_IO (CONFIG_DM9000_BASE) #define DM9000_DATA (CONFIG_DM9000_BASE + 4) -#define CONFIG_NET_RETRY_COUNT 10 #endif /* diff --git a/include/configs/corvus.h b/include/configs/corvus.h index 5347115..4c25c90 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -64,7 +64,6 @@ /* Ethernet */ #define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_AT91_WANTS_COMMON_PHY /* DFU class support */ diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index fa7afab..ff0cc35 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -137,13 +137,6 @@ #define CONFIG_SYS_NAND_ECCBYTES 10 #endif -/* - * Network & Ethernet Configuration - */ -#ifdef CONFIG_DRIVER_TI_EMAC -#define CONFIG_NET_RETRY_COUNT 10 -#endif - #ifdef CONFIG_MTD_NOR_FLASH #define CONFIG_SYS_FLASH_SECT_SZ (128 << 10) /* 128KB */ #define CONFIG_SYS_FLASH_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 0637c7d..16b3650 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -35,7 +35,6 @@ /* Hardware drivers */ /* DM9000 */ -#define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_DRIVER_DM9000 1 #define CONFIG_DM9000_BASE 0x2c000000 #define DM9000_IO CONFIG_DM9000_BASE diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 711e37c..4544373 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -55,9 +55,6 @@ /* Enhance our eMMC support / experience. */ #define CONFIG_HSMMC2_8BIT -/* CPSW Ethernet */ -#define CONFIG_NET_RETRY_COUNT 10 - /* * Default to using SPI for environment, etc. * 0x000000 - 0x040000 : QSPI.SPL (256KiB) diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index ef91146..860709a 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -54,7 +54,6 @@ /* JFFS2 */ /* Ethernet */ -#define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_RMII #define CONFIG_PHY_ID 0 #define CONFIG_MACB_SEARCH_PHY diff --git a/include/configs/meesc.h b/include/configs/meesc.h index e841c94..df29021 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -68,7 +68,6 @@ /* Ethernet */ #define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 20 #undef CONFIG_RESET_PHY_R /* hw-controller addresses */ diff --git a/include/configs/mvebu_armada-37xx.h b/include/configs/mvebu_armada-37xx.h index 77f9d0e..06882fb 100644 --- a/include/configs/mvebu_armada-37xx.h +++ b/include/configs/mvebu_armada-37xx.h @@ -40,11 +40,6 @@ */ #define DEFAULT_ENV_IS_RW /* required for configuring default fdtfile= */ -/* - * Ethernet Driver configuration - */ -#define CONFIG_NET_RETRY_COUNT 50 - #define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3) /* diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h index 049f00f..8e325e8 100644 --- a/include/configs/mvebu_armada-8k.h +++ b/include/configs/mvebu_armada-8k.h @@ -33,11 +33,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 -/* - * Ethernet Driver configuration - */ -#define CONFIG_NET_RETRY_COUNT 50 - #define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3) /* USB ethernet */ diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index e70f5fc..512ddbc 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -137,13 +137,6 @@ #endif /* - * Network & Ethernet Configuration - */ -#ifdef CONFIG_DRIVER_TI_EMAC -#define CONFIG_NET_RETRY_COUNT 10 -#endif - -/* * U-Boot general configuration */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h index 7db27ab..0a782b4 100644 --- a/include/configs/pic32mzdask.h +++ b/include/configs/pic32mzdask.h @@ -48,7 +48,6 @@ * Networking Configuration */ #define CONFIG_SYS_RX_ETH_BUFFER 8 -#define CONFIG_NET_RETRY_COUNT 20 /*-------------------------------------------------- * USB Configuration diff --git a/include/configs/sama7g5ek.h b/include/configs/sama7g5ek.h index 2d5afab..bca7166 100644 --- a/include/configs/sama7g5ek.h +++ b/include/configs/sama7g5ek.h @@ -24,6 +24,4 @@ GENERATED_GBL_DATA_SIZE) #endif -#define CONFIG_NET_RETRY_COUNT 50 - #endif diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 615458c..6235ad2 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -133,8 +133,6 @@ * 0x442000 - 0x800000 : Userland */ -#define CONFIG_NET_RETRY_COUNT 10 - /* NAND support */ #ifdef CONFIG_MTD_RAW_NAND /* UBI Support */ diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index 2a00bfa..7aa6c40 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -86,7 +86,6 @@ * */ #define CONFIG_RMII /* use reduced MII inteface */ -#define CONFIG_NET_RETRY_COUNT 20 /* # of DHCP/BOOTP retries */ #define CONFIG_AT91_WANTS_COMMON_PHY /* BOOTP and DHCP options */ diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h index 5820423..6861344 100644 --- a/include/configs/snapper9260.h +++ b/include/configs/snapper9260.h @@ -39,7 +39,6 @@ /* Ethernet */ #define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_RESET_PHY_R #define CONFIG_AT91_WANTS_COMMON_PHY #define CONFIG_TFTP_PORT diff --git a/include/configs/snapper9g45.h b/include/configs/snapper9g45.h index 2377190..069f4c2 100644 --- a/include/configs/snapper9g45.h +++ b/include/configs/snapper9g45.h @@ -40,7 +40,6 @@ /* Ethernet */ #define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_RESET_PHY_R #define CONFIG_AT91_WANTS_COMMON_PHY #define CONFIG_TFTP_PORT diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index 0f786ab..95434aa 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -114,7 +114,6 @@ */ /* Ethernet */ -#define CONFIG_NET_RETRY_COUNT 10 #define CONFIG_PHY_ET1011C_TX_CLK_FIX #endif /* ! __CONFIG_TI814X_EVM_H */ diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index 533673b..05f7874 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -68,8 +68,6 @@ #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ CONFIG_SPL_TEXT_BASE) -#define CONFIG_NET_RETRY_COUNT 10 - /* Since SPL did pll and ddr initialization for us, * we don't need to do it twice. */ diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h index 10da123..f8bd555 100644 --- a/include/configs/ti_am335x_common.h +++ b/include/configs/ti_am335x_common.h @@ -25,11 +25,6 @@ #endif #define CONFIG_SYS_NS16550_CLK 48000000 -#ifndef CONFIG_SPL_BUILD -/* Network defines. */ -#define CONFIG_NET_RETRY_COUNT 10 -#endif - /* * SPL related defines. The Public RAM memory map the ROM defines the * area between 0x402F0400 and 0x4030B800 as a download area and diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h index 0243016..57f013c 100644 --- a/include/configs/ti_armv7_keystone2.h +++ b/include/configs/ti_armv7_keystone2.h @@ -63,7 +63,6 @@ #define CONFIG_SYS_SPI_CLK ks_clk_get_rate(KS2_CLK1_6) /* Network Configuration */ -#define CONFIG_NET_RETRY_COUNT 32 #define CONFIG_SYS_SGMII_REFCLK_MHZ 312 #define CONFIG_SYS_SGMII_LINERATE_MHZ 1250 #define CONFIG_SYS_SGMII_RATESCALE 2 diff --git a/include/configs/turris_mox.h b/include/configs/turris_mox.h index 2a34c8a..dc2fdcc 100644 --- a/include/configs/turris_mox.h +++ b/include/configs/turris_mox.h @@ -21,8 +21,6 @@ 4000000, 4500000, 5000000, 5500000, \ 6000000 } -#define CONFIG_NET_RETRY_COUNT 50 - #define CONFIG_USB_MAX_CONTROLLER_COUNT 6 #define BOOT_TARGET_DEVICES(func) \ diff --git a/include/configs/usb_a9263.h b/include/configs/usb_a9263.h index bc40029..128be92 100644 --- a/include/configs/usb_a9263.h +++ b/include/configs/usb_a9263.h @@ -45,7 +45,6 @@ /* Ethernet */ #define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_AT91_WANTS_COMMON_PHY /* USB */ diff --git a/include/configs/vinco.h b/include/configs/vinco.h index 7bd4882..a6511b3 100644 --- a/include/configs/vinco.h +++ b/include/configs/vinco.h @@ -50,7 +50,6 @@ /* Ethernet Hardware */ #define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_MACB_SEARCH_PHY #ifdef CONFIG_SPI_BOOT |