diff options
Diffstat (limited to 'include/linux/mtd/st_smi.h')
-rw-r--r-- | include/linux/mtd/st_smi.h | 100 |
1 files changed, 0 insertions, 100 deletions
diff --git a/include/linux/mtd/st_smi.h b/include/linux/mtd/st_smi.h deleted file mode 100644 index 6058969..0000000 --- a/include/linux/mtd/st_smi.h +++ /dev/null @@ -1,100 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2009 - * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com. - */ - -#ifndef ST_SMI_H -#define ST_SMI_H - -/* 0xF800.0000 . 0xFBFF.FFFF 64MB SMI (Serial Flash Mem) */ -/* 0xFC00.0000 . 0xFC1F.FFFF 2MB SMI (Serial Flash Reg.) */ - -#define FLASH_START_ADDRESS CONFIG_SYS_FLASH_BASE -#define FLASH_BANK_SIZE CONFIG_SYS_FLASH_BANK_SIZE - -#define SMIBANK0_BASE (FLASH_START_ADDRESS) -#define SMIBANK1_BASE (SMIBANK0_BASE + FLASH_BANK_SIZE) -#define SMIBANK2_BASE (SMIBANK1_BASE + FLASH_BANK_SIZE) -#define SMIBANK3_BASE (SMIBANK2_BASE + FLASH_BANK_SIZE) - -#define BANK0 0 -#define BANK1 1 -#define BANK2 2 -#define BANK3 3 - -struct smi_regs { - u32 smi_cr1; - u32 smi_cr2; - u32 smi_sr; - u32 smi_tr; - u32 smi_rr; -}; - -/* CONTROL REG 1 */ -#define BANK_EN 0x0000000F /* enables all banks */ -#define DSEL_TIME 0x00000060 /* Deselect time */ -#define PRESCAL5 0x00000500 /* AHB_CK prescaling value */ -#define PRESCALA 0x00000A00 /* AHB_CK prescaling value */ -#define PRESCAL3 0x00000300 /* AHB_CK prescaling value */ -#define PRESCAL4 0x00000400 /* AHB_CK prescaling value */ -#define SW_MODE 0x10000000 /* enables SW Mode */ -#define WB_MODE 0x20000000 /* Write Burst Mode */ -#define FAST_MODE 0x00008000 /* Fast Mode */ -#define HOLD1 0x00010000 - -/* CONTROL REG 2 */ -#define RD_STATUS_REG 0x00000400 /* reads status reg */ -#define WE 0x00000800 /* Write Enable */ -#define BANK0_SEL 0x00000000 /* Select Banck0 */ -#define BANK1_SEL 0x00001000 /* Select Banck1 */ -#define BANK2_SEL 0x00002000 /* Select Banck2 */ -#define BANK3_SEL 0x00003000 /* Select Banck3 */ -#define BANKSEL_SHIFT 12 -#define SEND 0x00000080 /* Send data */ -#define TX_LEN_1 0x00000001 /* data length = 1 byte */ -#define TX_LEN_2 0x00000002 /* data length = 2 byte */ -#define TX_LEN_3 0x00000003 /* data length = 3 byte */ -#define TX_LEN_4 0x00000004 /* data length = 4 byte */ -#define RX_LEN_1 0x00000010 /* data length = 1 byte */ -#define RX_LEN_2 0x00000020 /* data length = 2 byte */ -#define RX_LEN_3 0x00000030 /* data length = 3 byte */ -#define RX_LEN_4 0x00000040 /* data length = 4 byte */ -#define TFIE 0x00000100 /* Tx Flag Interrupt Enable */ -#define WCIE 0x00000200 /* WCF Interrupt Enable */ - -/* STATUS_REG */ -#define INT_WCF_CLR 0xFFFFFDFF /* clear: WCF clear */ -#define INT_TFF_CLR 0xFFFFFEFF /* clear: TFF clear */ -#define WIP_BIT 0x00000001 /* WIP Bit of SPI SR */ -#define WEL_BIT 0x00000002 /* WEL Bit of SPI SR */ -#define RSR 0x00000005 /* Read Status regiser */ -#define TFF 0x00000100 /* Transfer Finished FLag */ -#define WCF 0x00000200 /* Transfer Finished FLag */ -#define ERF1 0x00000400 /* Error Flag 1 */ -#define ERF2 0x00000800 /* Error Flag 2 */ -#define WM0 0x00001000 /* WM Bank 0 */ -#define WM1 0x00002000 /* WM Bank 1 */ -#define WM2 0x00004000 /* WM Bank 2 */ -#define WM3 0x00008000 /* WM Bank 3 */ -#define WM_SHIFT 12 - -/* TR REG */ -#define READ_ID 0x0000009F /* Read Identification */ -#define BULK_ERASE 0x000000C7 /* BULK erase */ -#define SECTOR_ERASE 0x000000D8 /* SECTOR erase */ -#define WRITE_ENABLE 0x00000006 /* Wenable command to FLASH */ - -struct flash_dev { - u32 density; - ulong size; - ushort sector_count; -}; - -#define SFLASH_PAGE_SIZE 0x100 /* flash page size */ -#define XFER_FINISH_TOUT 15 /* xfer finish timeout(in ms) */ -#define WMODE_TOUT 15 /* write enable timeout(in ms) */ - -extern void smi_init(void); - -#endif |