diff options
Diffstat (limited to 'include/configs')
255 files changed, 53 insertions, 1475 deletions
diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h index 6a69ac4..5ed624c 100644 --- a/include/configs/M5208EVBE.h +++ b/include/configs/M5208EVBE.h @@ -15,7 +15,6 @@ */ #define CONFIG_SYS_UART_PORT (0) -#undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 #ifdef CONFIG_MCFFEC @@ -39,7 +38,6 @@ #define CONFIG_MCFTMR /* I2C */ -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR #define CONFIG_UDP_CHECKSUM diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index 7421f3b..90f1664 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -20,7 +20,6 @@ #define CONFIG_SYS_UART_PORT (0) -#undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ /* @@ -48,7 +47,6 @@ #define CONFIG_MCFTMR /* I2C */ -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR #define CONFIG_SYS_I2C_PINMUX_REG (gpio->par_qspi) #define CONFIG_SYS_I2C_PINMUX_CLR ~(GPIO_PAR_FECI2C_SCL_MASK | GPIO_PAR_FECI2C_SDA_MASK) #define CONFIG_SYS_I2C_PINMUX_SET (GPIO_PAR_FECI2C_SCL_I2CSCL | GPIO_PAR_FECI2C_SDA_I2CSDA) diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index 7ee0ec6..00892ec 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -21,8 +21,6 @@ #define CONFIG_SYS_UART_PORT (0) -#undef CONFIG_WATCHDOG - #undef CONFIG_MONITOR_IS_IN_RAM /* no pre-loader required!!! ;-) */ /* diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index e9a7922..c5d8aa3 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -12,8 +12,6 @@ #define CONFIG_SYS_UART_PORT (0) -#undef CONFIG_WATCHDOG /* disable watchdog */ - /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash @@ -69,7 +67,6 @@ #define CONFIG_HOSTNAME "M5253DEMO" /* I2C */ -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR #define CONFIG_SYS_I2C_PINMUX_REG (*(u32 *) (CONFIG_SYS_MBAR+0x19C)) #define CONFIG_SYS_I2C_PINMUX_CLR (0xFFFFE7FF) #define CONFIG_SYS_I2C_PINMUX_SET (0) diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index 2121b29..e814a29 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -20,7 +20,6 @@ #define CONFIG_SYS_UART_PORT (0) -#undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 10000 /* timeout in milliseconds */ #undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index 7ca9164..b18f031 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -58,7 +58,6 @@ #endif /* I2C */ -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR #define CONFIG_SYS_I2C_PINMUX_REG (gpio_reg->par_feci2c) #define CONFIG_SYS_I2C_PINMUX_CLR (0xFFF0) #define CONFIG_SYS_I2C_PINMUX_SET (0x000F) diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index 7b33677..5db189a 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -20,7 +20,6 @@ #define CONFIG_SYS_UART_PORT (0) -#undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 #define CONFIG_SYS_UNIFY_CACHE @@ -54,7 +53,6 @@ #define CONFIG_MCFTMR /* I2C */ -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR #define CONFIG_UDP_CHECKSUM diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 19d8cfe..f96f54e 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -20,7 +20,6 @@ #define CONFIG_SYS_UART_PORT (0) -#undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ #define CONFIG_SYS_UNIFY_CACHE @@ -48,7 +47,6 @@ #define CONFIG_MCFTMR /* I2C */ -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR #define CONFIG_UDP_CHECKSUM @@ -137,10 +135,6 @@ # define CONFIG_SYS_NAND_SIZE 1 # define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } # define NAND_ALLOW_ERASE_ALL 1 -# define CONFIG_JFFS2_NAND 1 -# define CONFIG_JFFS2_DEV "nand0" -# define CONFIG_JFFS2_PART_SIZE (CONFIG_SYS_CS2_MASK & ~1) -# define CONFIG_JFFS2_PART_OFFSET 0x00000000 #endif #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index e2ddc48..b790601 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -22,7 +22,6 @@ #define CONFIG_SYS_UART_PORT (0) -#undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 3360 /* timeout in ms, max is 3.36 sec */ #define CONFIG_SYS_UNIFY_CACHE @@ -50,7 +49,6 @@ #define CONFIG_MCFTMR /* I2C */ -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR #define CONFIG_UDP_CHECKSUM @@ -139,10 +137,6 @@ # define CONFIG_SYS_NAND_SIZE 1 # define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } # define NAND_ALLOW_ERASE_ALL 1 -# define CONFIG_JFFS2_NAND 1 -# define CONFIG_JFFS2_DEV "nand0" -# define CONFIG_JFFS2_PART_SIZE (CONFIG_SYS_CS2_MASK & ~1) -# define CONFIG_JFFS2_PART_OFFSET 0x00000000 #endif #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 1cf3670..9a34e54 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -302,8 +302,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -#undef CONFIG_WATCHDOG /* watchdog disabled */ - #ifdef CONFIG_MMC #define CONFIG_FSL_ESDHC_PIN_MUX #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR @@ -326,7 +324,6 @@ */ #define CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_NETDEV "eth1" diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index ab029aa..84e05ea 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -26,8 +26,6 @@ #define CONFIG_HAS_FEC 1 /* 8540 has FEC */ #endif -#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ - /* * sysclk for MPC85xx * @@ -46,10 +44,6 @@ * Note that PCI-X won't work at 33MHz. */ -#ifndef CONFIG_SYS_CLK_FREQ -#define CONFIG_SYS_CLK_FREQ 33000000 -#endif - /* * These can be toggled for performance analysis, otherwise use default. */ @@ -266,8 +260,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -#undef CONFIG_WATCHDOG /* watchdog disabled */ - /* * Miscellaneous configurable options */ diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 349b486..f583aa8 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -19,15 +19,12 @@ #define CONFIG_PCI1 /* PCI controller 1 */ #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ #undef CONFIG_PCI2 -#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ #ifndef __ASSEMBLY__ #include <linux/stringify.h> -extern unsigned long get_clock_freq(void); #endif -#define CONFIG_SYS_CLK_FREQ get_clock_freq() /* sysclk for MPC85xx */ /* * These can be toggled for performance analysis, otherwise use default. @@ -384,8 +381,6 @@ extern unsigned long get_clock_freq(void); */ #define CONFIG_BOOTP_BOOTFILESIZE -#undef CONFIG_WATCHDOG /* watchdog disabled */ - /* * Miscellaneous configurable options */ diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index 2167dcd..b8a72d0 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -27,7 +27,6 @@ * assume U-Boot is less than 0.5MB */ -#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ /* @@ -44,10 +43,6 @@ * in the README.mpc85xxads. */ -#ifndef CONFIG_SYS_CLK_FREQ -#define CONFIG_SYS_CLK_FREQ 33000000 -#endif - /* * These can be toggled for performance analysis, otherwise use default. */ @@ -253,8 +248,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -#undef CONFIG_WATCHDOG /* watchdog disabled */ - /* * Miscellaneous configurable options */ diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index d36a8e2..6a9c86c 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -63,19 +63,16 @@ #define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0 #else #ifdef CONFIG_TPL_BUILD #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_NAND_INIT #define CONFIG_SPL_COMMON_INIT_DDR #define CONFIG_SPL_MAX_SIZE (128 << 10) -#define CONFIG_TPL_TEXT_BASE 0xD0001000 #define CONFIG_SYS_MPC85XX_NO_RESETVEC #define CONFIG_SYS_NAND_U_BOOT_SIZE (576 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) -#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) #elif defined(CONFIG_SPL_BUILD) #define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_NAND_MINIMAL @@ -84,7 +81,6 @@ #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0xD0000000 #define CONFIG_SYS_NAND_U_BOOT_START 0xD0000000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) #endif #define CONFIG_SPL_PAD_TO 0x20000 #define CONFIG_TPL_PAD_TO 0x20000 @@ -102,7 +98,7 @@ #endif #ifdef CONFIG_TPL_BUILD -#define CONFIG_SYS_MONITOR_BASE CONFIG_TPL_TEXT_BASE +#define CONFIG_SYS_MONITOR_BASE 0xD0001000 #elif defined(CONFIG_SPL_BUILD) #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE #else @@ -110,12 +106,10 @@ #endif /* High Level Configuration Options */ -#define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ #if defined(CONFIG_PCI) #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ #define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ /* * PCI Windows @@ -152,8 +146,6 @@ #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ #endif -#define CONFIG_SYS_CLK_FREQ 66666666 /* SYSCLK for P1010 RDB */ - #define CONFIG_HWCONFIG /* * These can be toggled for performance analysis, otherwise use default. @@ -573,7 +565,6 @@ extern unsigned long get_sdram_size(void); #if defined(CONFIG_HAS_FSL_DR_USB) #ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_USB_EHCI_FSL #endif #endif @@ -597,8 +588,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_LOADS_ECHO /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ -#undef CONFIG_WATCHDOG /* watchdog disabled */ - #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI_HCD) \ || defined(CONFIG_FSL_SATA) #endif diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index ef4bb0b..8ada25d 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -36,7 +36,6 @@ #define CONFIG_PCIE1 /* PCIE controller 1 */ #define CONFIG_PCIE2 /* PCIE controller 2 */ #define CONFIG_PCIE3 /* PCIE controller 3 */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ #define CONFIG_SYS_SRIO #define CONFIG_SRIO1 /* SRIO port 1 */ @@ -50,10 +49,8 @@ #endif #ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(unsigned long dummy); #include <linux/stringify.h> #endif -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /* * These can be toggled for performance analysis, otherwise use default. @@ -395,7 +392,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_HAS_FSL_MPH_USB #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif diff --git a/include/configs/SBx81LIFKW.h b/include/configs/SBx81LIFKW.h index bf9f26e..dbaffc6 100644 --- a/include/configs/SBx81LIFKW.h +++ b/include/configs/SBx81LIFKW.h @@ -6,25 +6,16 @@ #ifndef _CONFIG_SBX81LIFKW_H #define _CONFIG_SBX81LIFKW_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ -#define CONFIG_KW88F6281 1 /* SOC Name */ -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg - /* additions for new ARM relocation support */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ #define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 */ #define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ -#define CONFIG_KIRKWOOD_GPIO 1 /* * NS16550 Configuration */ -#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK @@ -61,7 +52,6 @@ * Ethernet Driver configuration */ #ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */ #define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */ #define CONFIG_PHY_BASE_ADR 0x01 #endif /* CONFIG_CMD_NET */ diff --git a/include/configs/SBx81LIFXCAT.h b/include/configs/SBx81LIFXCAT.h index 71394ae..bbd3ccc 100644 --- a/include/configs/SBx81LIFXCAT.h +++ b/include/configs/SBx81LIFXCAT.h @@ -6,25 +6,16 @@ #ifndef _CONFIG_SBX81LIFXCAT_H #define _CONFIG_SBX81LIFXCAT_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ -#define CONFIG_KW88F6281 1 /* SOC Name */ -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg - /* additions for new ARM relocation support */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ #define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 */ #define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ -#define CONFIG_KIRKWOOD_GPIO 1 /* * NS16550 Configuration */ -#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK @@ -66,7 +57,6 @@ * Ethernet Driver configuration */ #ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */ #define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */ #define CONFIG_PHY_BASE_ADR 0x01 #endif /* CONFIG_CMD_NET */ diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index faeba06..9b7784a 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -41,7 +41,6 @@ #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0x30000000 #define CONFIG_SYS_NAND_U_BOOT_START 0x30000000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) #endif #ifdef CONFIG_SPIFLASH @@ -116,12 +115,6 @@ #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc #endif -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - -#define CONFIG_SYS_CLK_FREQ 100000000 - /* * These can be toggled for performance analysis, otherwise use default. */ @@ -416,7 +409,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_PCIE1 /* PCIE controller 1 */ #define CONFIG_PCIE2 /* PCIE controller 2 */ #define CONFIG_PCIE3 /* PCIE controller 3 */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ #ifdef CONFIG_PCI /* controller 1, direct to uli, tgtid 3, Base address 20000 */ @@ -452,7 +444,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_HAS_FSL_DR_USB #ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index e702092..7f3b190 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -40,7 +40,6 @@ #endif #define CONFIG_SYS_NAND_U_BOOT_DST 0x30000000 #define CONFIG_SYS_NAND_U_BOOT_START 0x30000000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) #endif #ifdef CONFIG_SPIFLASH @@ -85,8 +84,6 @@ #define CONFIG_PCIE3 /* PCIE controller 3 */ #define CONFIG_PCIE4 /* PCIE controller 4 */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ - #if defined(CONFIG_SPIFLASH) #elif defined(CONFIG_MTD_RAW_NAND) #ifdef CONFIG_NXP_ESBC @@ -95,8 +92,6 @@ #endif #endif -#define CONFIG_SYS_CLK_FREQ 100000000 - /* * These can be toggled for performance analysis, otherwise use default. */ @@ -460,7 +455,6 @@ #ifdef CONFIG_HAS_FSL_DR_USB #ifdef CONFIG_USB_EHCI_HCD -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif #endif @@ -499,8 +493,6 @@ #define CONFIG_SYS_DPAA_FMAN #define CONFIG_SYS_DPAA_PME -#define CONFIG_U_QE - #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) #endif /* CONFIG_NOBQFMAN */ diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index 7344f93..aaea314 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -44,7 +44,6 @@ #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) #endif #ifdef CONFIG_SPIFLASH @@ -94,12 +93,6 @@ #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #endif -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() - /* * Config the L3 Cache as L3 SRAM */ @@ -360,12 +353,6 @@ unsigned long get_board_sys_clk(void); #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 -#define CONFIG_VID_FLS_ENV "t208xqds_vdd_mv" -#ifndef CONFIG_SPL_BUILD -#define CONFIG_VID -#endif -#define CONFIG_VOL_MONITOR_IR36021_SET -#define CONFIG_VOL_MONITOR_IR36021_READ /* The lowest and highest voltage allowed for T208xQDS */ #define VDD_MV_MIN 819 #define VDD_MV_MAX 1212 @@ -420,7 +407,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_PCIE2 /* PCIE controller 2 */ #define CONFIG_PCIE3 /* PCIE controller 3 */ #define CONFIG_PCIE4 /* PCIE controller 4 */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ /* controller 1, direct to uli, tgtid 3, Base address 20000 */ #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull @@ -517,7 +503,6 @@ unsigned long get_board_sys_clk(void); * USB */ #ifdef CONFIG_USB_EHCI_HCD -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_HAS_FSL_DR_USB #endif diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index 979a997..467f634 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -39,7 +39,6 @@ #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) #endif #ifdef CONFIG_SPIFLASH @@ -89,12 +88,6 @@ #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #endif -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - -#define CONFIG_SYS_CLK_FREQ 66660000 - /* * Config the L3 Cache as L3 SRAM */ @@ -312,12 +305,6 @@ unsigned long get_board_sys_clk(void); #define I2C_MUX_CH_VOL_MONITOR 0xa -#define CONFIG_VID_FLS_ENV "t208xrdb_vdd_mv" -#ifndef CONFIG_SPL_BUILD -#define CONFIG_VID -#endif -#define CONFIG_VOL_MONITOR_IR36021_SET -#define CONFIG_VOL_MONITOR_IR36021_READ /* The lowest and highest voltage allowed for T208xRDB */ #define VDD_MV_MIN 819 #define VDD_MV_MAX 1212 @@ -372,7 +359,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_PCIE2 /* PCIE controller 2 */ #define CONFIG_PCIE3 /* PCIE controller 3 */ #define CONFIG_PCIE4 /* PCIE controller 4 */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ /* controller 1, direct to uli, tgtid 3, Base address 20000 */ #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull @@ -472,7 +458,6 @@ unsigned long get_board_sys_clk(void); * USB */ #ifdef CONFIG_USB_EHCI_HCD -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_HAS_FSL_DR_USB #endif diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index 12a11e2..2d63249 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -60,7 +60,6 @@ #define CONFIG_PCIE1 /* PCIE controller 1 */ #define CONFIG_PCIE2 /* PCIE controller 2 */ #define CONFIG_PCIE3 /* PCIE controller 3 */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ /* * These can be toggled for performance analysis, otherwise use default. @@ -225,12 +224,6 @@ "setenv bootargs config-addr=0x60000000; " \ "bootm 0x01000000 - 0x00f00000" -#define CONFIG_SYS_CLK_FREQ 66666666 - -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - /* * DDR Setup */ @@ -408,12 +401,6 @@ unsigned long get_board_sys_clk(void); #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 -#define CONFIG_VID_FLS_ENV "t4240rdb_vdd_mv" -#ifndef CONFIG_SPL_BUILD -#define CONFIG_VID -#endif -#define CONFIG_VOL_MONITOR_IR36021_SET -#define CONFIG_VOL_MONITOR_IR36021_READ /* The lowest and highest voltage allowed for T4240RDB */ #define VDD_MV_MIN 819 #define VDD_MV_MAX 1212 @@ -498,7 +485,6 @@ unsigned long get_board_sys_clk(void); /* * USB */ -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_HAS_FSL_DR_USB diff --git a/include/configs/adp-ae3xx.h b/include/configs/adp-ae3xx.h index 973033d..58e8526 100644 --- a/include/configs/adp-ae3xx.h +++ b/include/configs/adp-ae3xx.h @@ -17,8 +17,6 @@ #define CONFIG_SKIP_TRUNOFF_WATCHDOG -#define CONFIG_ARCH_MAP_SYSMEM - #define CONFIG_BOOTP_SERVERIP #ifdef CONFIG_SKIP_LOWLEVEL_INIT @@ -30,8 +28,7 @@ /* * Timer */ -#define CONFIG_SYS_CLK_FREQ 39062500 -#define VERSION_CLOCK CONFIG_SYS_CLK_FREQ +#define VERSION_CLOCK get_board_sys_clk() /* * Use Externel CLOCK or PCLK diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h index f533ada..1022764 100644 --- a/include/configs/adp-ag101p.h +++ b/include/configs/adp-ag101p.h @@ -15,8 +15,6 @@ */ #define CONFIG_USE_INTERRUPT -#define CONFIG_ARCH_MAP_SYSMEM - #define CONFIG_BOOTP_SERVERIP #ifndef CONFIG_SKIP_LOWLEVEL_INIT @@ -32,8 +30,7 @@ /* * Timer */ -#define CONFIG_SYS_CLK_FREQ 39062500 -#define VERSION_CLOCK CONFIG_SYS_CLK_FREQ +#define VERSION_CLOCK get_board_sys_clk() /* * Use Externel CLOCK or PCLK diff --git a/include/configs/alt.h b/include/configs/alt.h index 8456a6b..37b5800 100644 --- a/include/configs/alt.h +++ b/include/configs/alt.h @@ -34,8 +34,6 @@ #define CONFIG_BITBANGMII_MULTI /* Board Clock */ -#define RMOBILE_XTAL_CLK 20000000u -#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" \ diff --git a/include/configs/ap152.h b/include/configs/ap152.h index c3ed137..5bfca42 100644 --- a/include/configs/ap152.h +++ b/include/configs/ap152.h @@ -25,8 +25,6 @@ */ #define CONFIG_SYS_NS16550_CLK 25000000 -#define CONFIG_ENV_SPI_MAX_HZ 25000000 - /* Miscellaneous configurable options */ /* diff --git a/include/configs/apalis-imx8.h b/include/configs/apalis-imx8.h index 27007c5..c2b0d6f 100644 --- a/include/configs/apalis-imx8.h +++ b/include/configs/apalis-imx8.h @@ -50,7 +50,7 @@ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=PARTUUID=${uuid} rootwait " \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "netargs=setenv bootargs console=${console},${baudrate} " \ "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \ "\0" \ @@ -68,8 +68,6 @@ #define CONFIG_SYS_INIT_SP_ADDR 0x80200000 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - /* On Apalis iMX8 USDHC1 is eMMC, USDHC2 is 8-bit and USDHC3 is 4-bit MMC/SD */ #define CONFIG_SYS_FSL_USDHC_NUM 3 diff --git a/include/configs/apalis-imx8x.h b/include/configs/apalis-imx8x.h index 50dae2d..402fed1 100644 --- a/include/configs/apalis-imx8x.h +++ b/include/configs/apalis-imx8x.h @@ -77,7 +77,7 @@ "mmcargs=setenv bootargs ${consoleargs} " \ "root=PARTUUID=${uuid} rootwait " \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "netargs=setenv bootargs ${consoleargs} " \ "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp " \ "${vidargs}\0" \ @@ -99,8 +99,6 @@ /* Environment in eMMC, before config block at the end of 1st "boot sector" */ -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - /* On Apalis iMX8X USDHC1 is eMMC, USDHC2 is 4-bit SD */ #define CONFIG_SYS_FSL_USDHC_NUM 2 diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h index dfed161..13c8d8a 100644 --- a/include/configs/apalis_imx6.h +++ b/include/configs/apalis_imx6.h @@ -45,7 +45,6 @@ #define CONFIG_USBD_HS /* Framebuffer and LCD */ -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE #define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX_HDMI diff --git a/include/configs/apple.h b/include/configs/apple.h index b1f6043..9cf20fc 100644 --- a/include/configs/apple.h +++ b/include/configs/apple.h @@ -5,8 +5,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x880000000 -#define CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE CONFIG_SYS_TEXT_BASE - /* Environment */ #define ENV_DEVICE_SETTINGS \ "stdin=serial,usbkbd\0" \ diff --git a/include/configs/armadillo-800eva.h b/include/configs/armadillo-800eva.h index 73f63c5..7714da4 100644 --- a/include/configs/armadillo-800eva.h +++ b/include/configs/armadillo-800eva.h @@ -17,7 +17,7 @@ #define CONFIG_TMU_TIMER #define CONFIG_SYS_TIMER_COUNTS_DOWN #define CONFIG_SYS_TIMER_COUNTER (TMU_BASE + 0xc) /* TCNT0 */ -#define CONFIG_SYS_TIMER_RATE (CONFIG_SYS_CLK_FREQ / 4) +#define CONFIG_SYS_TIMER_RATE (get_board_sys_clk() / 4) /* STACK */ #define CONFIG_SYS_INIT_SP_ADDR 0xE8083000 @@ -72,7 +72,6 @@ #define CONFIG_BITBANGMII_MULTI /* Board Clock */ -#define CONFIG_SYS_CLK_FREQ 50000000 -#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ get_board_sys_clk() #endif /* __ARMADILLO_800EVA_H */ diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index 2e7927b..d87ca30 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -58,7 +58,6 @@ #define CONFIG_MCFTMR /* I2C */ -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR /* * Defines processor clock - important for correct timings concerning serial @@ -91,7 +90,6 @@ */ #ifndef CONFIG_MONITOR_IS_IN_RAM -#define CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 3355 /* timeout in milliseconds */ #endif diff --git a/include/configs/bcm_ns3.h b/include/configs/bcm_ns3.h index 7d6edbd..81b4218 100644 --- a/include/configs/bcm_ns3.h +++ b/include/configs/bcm_ns3.h @@ -44,7 +44,6 @@ /* Access eMMC Boot_1 and Boot_2 partitions */ /* enable 64-bit PCI resources */ -#define CONFIG_SYS_PCI_64BIT 1 #define CONSOLE_ARGS "console_args=console=ttyS0,115200n8\0" #define MAX_CPUS "max_cpus=maxcpus=8\0" diff --git a/include/configs/bcmstb.h b/include/configs/bcmstb.h index e7f380b..98c8159 100644 --- a/include/configs/bcmstb.h +++ b/include/configs/bcmstb.h @@ -90,7 +90,6 @@ extern phys_addr_t prior_stage_fdt_address; /* * CONFIG_SYS_LOAD_ADDR - 1 MiB. */ -#define CONFIG_SYS_FDT_SAVE_ADDRESS 0x1f00000 #define CONFIG_SYS_CBSIZE 512 #define CONFIG_SYS_MAXARGS 32 @@ -104,7 +103,6 @@ extern phys_addr_t prior_stage_fdt_address; */ #define V_NS16550_CLK 81000000 -#define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK @@ -126,8 +124,6 @@ extern phys_addr_t prior_stage_fdt_address; /* * Flash configuration. */ -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_SPI_FLASH_MACRONIX /* * Filesystem configuration. diff --git a/include/configs/blanche.h b/include/configs/blanche.h index f048f15..882b94f 100644 --- a/include/configs/blanche.h +++ b/include/configs/blanche.h @@ -45,8 +45,6 @@ #endif /* Board Clock */ -#define RMOBILE_XTAL_CLK 20000000u -#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK /* ENV setting */ diff --git a/include/configs/broadcom_bcm963158.h b/include/configs/broadcom_bcm963158.h index de45f74..5aa784d 100644 --- a/include/configs/broadcom_bcm963158.h +++ b/include/configs/broadcom_bcm963158.h @@ -28,7 +28,6 @@ #ifdef CONFIG_MTD_RAW_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_SELF_INIT #endif /* CONFIG_MTD_RAW_NAND */ /* diff --git a/include/configs/broadcom_bcm968360bg.h b/include/configs/broadcom_bcm968360bg.h index 0391f06..01bab04 100644 --- a/include/configs/broadcom_bcm968360bg.h +++ b/include/configs/broadcom_bcm968360bg.h @@ -27,7 +27,6 @@ #ifdef CONFIG_MTD_RAW_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_SELF_INIT #endif /* CONFIG_MTD_RAW_NAND */ /* diff --git a/include/configs/broadcom_bcm968380gerg.h b/include/configs/broadcom_bcm968380gerg.h index 866de25..c1c1b37 100644 --- a/include/configs/broadcom_bcm968380gerg.h +++ b/include/configs/broadcom_bcm968380gerg.h @@ -8,5 +8,4 @@ #ifdef CONFIG_MTD_RAW_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_SELF_INIT #endif /* CONFIG_MTD_RAW_NAND */ diff --git a/include/configs/broadcom_bcm968580xref.h b/include/configs/broadcom_bcm968580xref.h index 179aa9d..ebfc2ec 100644 --- a/include/configs/broadcom_bcm968580xref.h +++ b/include/configs/broadcom_bcm968580xref.h @@ -27,7 +27,6 @@ #ifdef CONFIG_MTD_RAW_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_SELF_INIT #endif /* CONFIG_MTD_RAW_NAND */ /* diff --git a/include/configs/capricorn-common.h b/include/configs/capricorn-common.h index e42f2b5..1cde5f7 100644 --- a/include/configs/capricorn-common.h +++ b/include/configs/capricorn-common.h @@ -11,15 +11,12 @@ #include <asm/arch/imx-regs.h> #include "siemens-env-common.h" -#include "siemens-ccp-common.h" /* SPL config */ #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800 #define CONFIG_SPL_STACK 0x013E000 #define CONFIG_SPL_BSS_START_ADDR 0x00128000 @@ -35,9 +32,6 @@ #define CONFIG_FACTORYSET -#undef CONFIG_IDENT_STRING -#define CONFIG_IDENT_STRING GENERATE_CCP_VERSION("01", "07") - #define CONFIG_REMAKE_ELF /* ENET Config */ @@ -122,7 +116,6 @@ /* On CCP board, USDHC1 is for eMMC */ #define CONFIG_MMCROOT "/dev/mmcblk0p2" /* eMMC */ -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 #define CONFIG_SYS_SDRAM_BASE 0x80000000 #define PHYS_SDRAM_1 0x80000000 diff --git a/include/configs/cgtqmx8.h b/include/configs/cgtqmx8.h index 220eb81..d5549f6 100644 --- a/include/configs/cgtqmx8.h +++ b/include/configs/cgtqmx8.h @@ -14,8 +14,6 @@ #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800 #define CONFIG_SPL_STACK 0x013E000 #define CONFIG_SPL_BSS_START_ADDR 0x00128000 @@ -33,7 +31,6 @@ #define CONFIG_REMAKE_ELF /* Flat Device Tree Definitions */ -#define CONFIG_OF_BOARD_SETUP #define CONFIG_SYS_BOOTMAPSZ (256 << 20) #define CONFIG_SYS_FSL_ESDHC_ADDR 0 @@ -82,7 +79,7 @@ "boot_fdt=try\0" \ "fdt_file=imx8qm-cgt-qmx8.dtb\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot} earlycon\0 " \ @@ -127,8 +124,6 @@ #define CONFIG_SYS_INIT_SP_ADDR 0x80200000 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */ #define CONFIG_SYS_FSL_USDHC_NUM 3 diff --git a/include/configs/chromebook_coral.h b/include/configs/chromebook_coral.h index 27e60d8..0eeea80 100644 --- a/include/configs/chromebook_coral.h +++ b/include/configs/chromebook_coral.h @@ -18,8 +18,6 @@ "stdout=vidconsole,serial\0" \ "stderr=vidconsole,serial\0" -#define CONFIG_TPL_TEXT_BASE 0xffff8000 - #define CONFIG_SYS_NS16550_MEM32 #undef CONFIG_SYS_NS16550_PORT_MAPPED diff --git a/include/configs/chromebook_samus.h b/include/configs/chromebook_samus.h index 2fe3e72..9d5a63c 100644 --- a/include/configs/chromebook_samus.h +++ b/include/configs/chromebook_samus.h @@ -23,6 +23,4 @@ "stdout=vidconsole,serial\0" \ "stderr=vidconsole,serial\0" -#define CONFIG_TPL_TEXT_BASE 0xfffd8000 - #endif /* __CONFIG_H */ diff --git a/include/configs/ci20.h b/include/configs/ci20.h index 0a7043a..17954fe 100644 --- a/include/configs/ci20.h +++ b/include/configs/ci20.h @@ -35,7 +35,6 @@ #define CONFIG_SYS_MAXARGS 32 /* Max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot argument buffer size */ -#define CONFIG_VERSION_VARIABLE /* U-BOOT version */ /* Miscellaneous configuration options */ #define CONFIG_SYS_BOOTM_LEN (64 << 20) @@ -50,6 +49,4 @@ #define CONFIG_SPL_START_S_PATH "arch/mips/mach-jz47xx" -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x1c /* 14 KiB offset */ - #endif /* __CONFIG_CI20_H__ */ diff --git a/include/configs/cl-som-imx7.h b/include/configs/cl-som-imx7.h index 92770e8..a5bf6cc 100644 --- a/include/configs/cl-som-imx7.h +++ b/include/configs/cl-som-imx7.h @@ -49,7 +49,7 @@ "fdtaddr=0x83000000\0" \ "mmcdev_def="__stringify(CONFIG_SYS_MMC_DEV)"\0" \ "usbdev_def="__stringify(CONFIG_SYS_USB_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "usbpart=" __stringify(CONFIG_SYS_USB_IMG_LOAD_PART) "\0" \ "doboot=bootz ${loadaddr} - ${fdtaddr}\0" \ "mmc_config=mmc dev ${mmcdev}; mmc rescan\0" \ diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index d61d759..e1723c9 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -13,7 +13,6 @@ #include "mx6_common.h" /* Machine config */ -#define CONFIG_SYS_LITTLE_ENDIAN /* MMC */ #define CONFIG_SYS_FSL_USDHC_NUM 3 diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index be62caa..3e19e99 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -54,7 +54,6 @@ */ #if 0 -#define CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 10000 /* timeout in milliseconds */ #endif diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h index 82926af..0118250 100644 --- a/include/configs/colibri-imx8x.h +++ b/include/configs/colibri-imx8x.h @@ -80,7 +80,7 @@ "mmcargs=setenv bootargs ${consoleargs} " \ "root=PARTUUID=${uuid} rootwait " \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "netargs=setenv bootargs ${consoleargs} " \ "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp " \ "${vidargs}\0" \ @@ -102,8 +102,6 @@ /* Environment in eMMC, before config block at the end of 1st "boot sector" */ -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - /* On Colibri iMX8X USDHC1 is eMMC, USDHC2 is 4-bit SD */ #define CONFIG_SYS_FSL_USDHC_NUM 2 diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h index b103186..9a6f17f 100644 --- a/include/configs/colibri_imx6.h +++ b/include/configs/colibri_imx6.h @@ -35,7 +35,6 @@ #define CONFIG_USBD_HS /* Framebuffer and LCD */ -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE #define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_IMX_HDMI diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index 22eab77..0be7f5a 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -12,7 +12,6 @@ /* * High Level Board Configuration Options */ -#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */ /* Avoid overwriting factory configuration block */ #define CONFIG_BOARD_SIZE_LIMIT 0x40000 diff --git a/include/configs/colibri_t20.h b/include/configs/colibri_t20.h index e947b58..c377187 100644 --- a/include/configs/colibri_t20.h +++ b/include/configs/colibri_t20.h @@ -19,7 +19,6 @@ #define CONFIG_LCD_LOGO /* NAND support */ -#define CONFIG_TEGRA_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define UBOOT_UPDATE \ diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index a7c91b9..40984d6 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -14,8 +14,6 @@ #include <asm/arch/imx-regs.h> #include <linux/sizes.h> -#define CONFIG_SYS_FSL_CLK - #ifdef CONFIG_VIDEO_FSL_DCU_FB #define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO diff --git a/include/configs/comtrend_vr3032u.h b/include/configs/comtrend_vr3032u.h index fc890af..ee29f70 100644 --- a/include/configs/comtrend_vr3032u.h +++ b/include/configs/comtrend_vr3032u.h @@ -10,5 +10,4 @@ #ifdef CONFIG_MTD_RAW_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_SELF_INIT #endif /* CONFIG_MTD_RAW_NAND */ diff --git a/include/configs/condor.h b/include/configs/condor.h index 36466f0..822ef71 100644 --- a/include/configs/condor.h +++ b/include/configs/condor.h @@ -27,7 +27,6 @@ /* Board Clock */ /* XTAL_CLK : 33.33MHz */ -#define CONFIG_SYS_CLK_FREQ 33333333u /* Generic Timer Definitions (use in assembler source) */ #define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */ diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index a04e7f98..f6e0b2a 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -47,15 +47,12 @@ #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS #define CONFIG_PCIE1 /* PCIE controller 1 */ #define CONFIG_PCIE2 /* PCIE controller 2 */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ #if defined(CONFIG_SPIFLASH) #elif defined(CONFIG_SDCARD) #define CONFIG_FSL_FIXED_MMC_LOCATION #endif -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ - /* * These can be toggled for performance analysis, otherwise use default. */ @@ -392,7 +389,6 @@ #define CONFIG_HAS_FSL_MPH_USB #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) -#define CONFIG_USB_EHCI_FSL #define CONFIG_EHCI_HCD_INIT_AFTER_RESET #endif diff --git a/include/configs/corvus.h b/include/configs/corvus.h index 2d615d0..27284f7 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -66,7 +66,6 @@ #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8 -#define CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT #endif /* Ethernet */ diff --git a/include/configs/crs3xx-98dx3236.h b/include/configs/crs3xx-98dx3236.h index 27b45a7..4dbc758 100644 --- a/include/configs/crs3xx-98dx3236.h +++ b/include/configs/crs3xx-98dx3236.h @@ -11,7 +11,6 @@ */ #define CONFIG_SYS_BOOTM_LEN (64 * 1024 * 1024) /* 64 MB */ -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg /* Environment in SPI NOR flash */ diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index bd78866..97c9276 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -18,7 +18,6 @@ * SoC Configuration */ #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH -#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) @@ -136,10 +135,6 @@ 59, 60, 61, 62, 63 } #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 10 - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SYS_NAND_SELF_INIT -#endif #endif /* diff --git a/include/configs/db-xc3-24g4xg.h b/include/configs/db-xc3-24g4xg.h index 6a4c5a7..1d242bf 100644 --- a/include/configs/db-xc3-24g4xg.h +++ b/include/configs/db-xc3-24g4xg.h @@ -6,12 +6,6 @@ #ifndef _CONFIG_DB_XC3_24G4G_H #define _CONFIG_DB_XC3_24G4G_H -/* - * High Level Configuration Options (easy to change) - */ - -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg - /* Environment in SPI NOR flash */ /* NAND */ diff --git a/include/configs/deneb.h b/include/configs/deneb.h index a33165c..f155bb8 100644 --- a/include/configs/deneb.h +++ b/include/configs/deneb.h @@ -9,9 +9,6 @@ #include "capricorn-common.h" -#undef CONFIG_IDENT_STRING -#define CONFIG_IDENT_STRING GENERATE_CCP_VERSION("01", "06") - /* DDR3 board total DDR is 2 GB */ #undef PHYS_SDRAM_1_SIZE #define PHYS_SDRAM_1_SIZE 0x80000000 /* 2 GB */ diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h index 7fbe9df..1e24d05 100644 --- a/include/configs/devkit3250.h +++ b/include/configs/devkit3250.h @@ -28,7 +28,6 @@ /* * GPIO */ -#define CONFIG_LPC32XX_GPIO /* * Ethernet diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index d813d92..9282f83 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -46,15 +46,6 @@ /* TWL4030 */ -/* Board NAND Info */ -#define CONFIG_JFFS2_NAND -/* nand device jffs2 lives on */ -#define CONFIG_JFFS2_DEV "nand0" -/* start of jffs2 partition */ -#define CONFIG_JFFS2_PART_OFFSET 0x680000 -#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ - /* partition */ - /* BOOTP/DHCP options */ #define CONFIG_BOOTP_NISDOMAIN #define CONFIG_BOOTP_BOOTFILESIZE diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h index 3233bf1..8b8cd4c 100644 --- a/include/configs/dh_imx6.h +++ b/include/configs/dh_imx6.h @@ -64,13 +64,6 @@ #endif #endif -/* Watchdog */ -#if defined(CONFIG_SPL_BUILD) -#undef CONFIG_WDT -#undef CONFIG_WATCHDOG -#define CONFIG_HW_WATCHDOG -#endif - #ifndef CONFIG_SPL_BUILD #define CONFIG_EXTRA_ENV_SETTINGS \ "console=ttymxc0,115200\0" \ diff --git a/include/configs/display5.h b/include/configs/display5.h index 8633efb..38ac869 100644 --- a/include/configs/display5.h +++ b/include/configs/display5.h @@ -314,13 +314,6 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -/* Watchdog */ -#if defined(CONFIG_SPL_BUILD) -#undef CONFIG_WDT -#undef CONFIG_WATCHDOG -#define CONFIG_HW_WATCHDOG -#endif - /* ENV config */ #ifdef CONFIG_ENV_IS_IN_SPI_FLASH /* The 0x120000 value corresponds to above SPI-NOR memory MAP */ diff --git a/include/configs/dns325.h b/include/configs/dns325.h index 8e298dd..0590704 100644 --- a/include/configs/dns325.h +++ b/include/configs/dns325.h @@ -12,12 +12,6 @@ #ifndef _CONFIG_DNS325_H #define _CONFIG_DNS325_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -#define CONFIG_KW88F6281 /* SOC Name */ - #include "mv-common.h" /* Remove or override few declarations from mv-common.h */ @@ -32,7 +26,6 @@ /* * Enable GPI0 support */ -#define CONFIG_KIRKWOOD_GPIO /* * Environment variables configurations diff --git a/include/configs/dockstar.h b/include/configs/dockstar.h index 8a5daf4..0ad04ee 100644 --- a/include/configs/dockstar.h +++ b/include/configs/dockstar.h @@ -12,12 +12,6 @@ #define _CONFIG_DOCKSTAR_H /* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ -#define CONFIG_KW88F6281 1 /* SOC Name */ - -/* * mv-common.h should be defined after CMD configs since it used them * to enable certain macros */ diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h index 61b1e0f..beea234 100644 --- a/include/configs/dreamplug.h +++ b/include/configs/dreamplug.h @@ -11,12 +11,7 @@ #ifndef _CONFIG_DREAMPLUG_H #define _CONFIG_DREAMPLUG_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ - -#include "mv-plug-common.h" +#include "mv-common.h" /* * Environment variables configurations diff --git a/include/configs/ds109.h b/include/configs/ds109.h index c57461c..8553ea0 100644 --- a/include/configs/ds109.h +++ b/include/configs/ds109.h @@ -11,12 +11,7 @@ #ifndef _CONFIG_DS109_H #define _CONFIG_DS109_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ - -#include "mv-plug-common.h" +#include "mv-common.h" /* * Environment variables configurations diff --git a/include/configs/durian.h b/include/configs/durian.h index 1dec09b..c0ea42e 100644 --- a/include/configs/durian.h +++ b/include/configs/durian.h @@ -16,7 +16,6 @@ #define CONFIG_SYS_INIT_SP_ADDR (0x88000000 - 0x100000) /* PCI CONFIG */ -#define CONFIG_SYS_PCI_64BIT 1 #define CONFIG_PCI_SCAN_SHOW /* SCSI */ diff --git a/include/configs/eagle.h b/include/configs/eagle.h index ee53504..b8a7b5a 100644 --- a/include/configs/eagle.h +++ b/include/configs/eagle.h @@ -18,7 +18,6 @@ /* Board Clock */ /* XTAL_CLK : 33.33MHz */ -#define CONFIG_SYS_CLK_FREQ 33333333u /* Generic Timer Definitions (use in assembler source) */ #define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */ diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h index 6a32bc6..62b62e0 100644 --- a/include/configs/eb_cpu5282.h +++ b/include/configs/eb_cpu5282.h @@ -25,8 +25,6 @@ #define CONFIG_BOOT_RETRY_TIME -1 #define CONFIG_RESET_TO_RETRY -#define CONFIG_HW_WATCHDOG - #define STATUS_LED_ACTIVE 0 /*----------------------------------------------------------------------* @@ -187,8 +185,6 @@ * I2C */ -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR - #ifdef CONFIG_CMD_DATE #define CONFIG_RTC_DS1338 #define CONFIG_I2C_RTC_ADDR 0x68 diff --git a/include/configs/ebisu.h b/include/configs/ebisu.h index 48d4c8a..081d5e9 100644 --- a/include/configs/ebisu.h +++ b/include/configs/ebisu.h @@ -25,7 +25,6 @@ #define CONFIG_FLASH_SHOW_PROGRESS 45 #define CONFIG_SYS_FLASH_QUIET_TEST #define CONFIG_SYS_FLASH_BANKS_LIST { 0x08000000 } -#define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 #define CONFIG_SYS_MAX_FLASH_SECT 256 diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index 6b487b3..e20e058 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -28,9 +28,6 @@ * High Level Configuration Options (easy to change) */ -#define CONFIG_FEROCEON 1 /* CPU Core subversion */ -#define CONFIG_88F5182 1 /* SOC Name */ - #include <asm/arch/orion5x.h> /* * CLKs configurations diff --git a/include/configs/etamin.h b/include/configs/etamin.h index 5570086..dc83ab7 100644 --- a/include/configs/etamin.h +++ b/include/configs/etamin.h @@ -84,9 +84,6 @@ */ /* nedded by compliance test in read mode */ -#if defined(CONFIG_SPL_CMT) -#define CONFIG_SYS_DCACHE_OFF -#endif /* Define own nand partitions */ #define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE) diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index f9a739e..ccf615e 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -54,9 +54,6 @@ #endif /* JFFS2 */ -#ifdef CONFIG_CMD_JFFS2 -#define CONFIG_JFFS2_NAND -#endif /* Ethernet */ #define CONFIG_NET_RETRY_COUNT 20 @@ -66,7 +63,6 @@ /* MMC */ #ifdef CONFIG_CMD_MMC -#define CONFIG_GENERIC_ATMEL_MCI #define CONFIG_SYS_MMC_CD_PIN AT91_PIO_PORTC, 8 #endif diff --git a/include/configs/evb_ast2500.h b/include/configs/evb_ast2500.h index 558d6f9..b109a15 100644 --- a/include/configs/evb_ast2500.h +++ b/include/configs/evb_ast2500.h @@ -13,9 +13,6 @@ #define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE -/* Memory Info */ -#define CONFIG_SYS_LOAD_ADDR 0x83000000 - /* Misc */ #define CONFIG_EXTRA_ENV_SETTINGS \ "" diff --git a/include/configs/evb_ast2600.h b/include/configs/evb_ast2600.h index 9049a9f..3c2155d 100644 --- a/include/configs/evb_ast2600.h +++ b/include/configs/evb_ast2600.h @@ -10,9 +10,6 @@ #define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE -/* Memory Info */ -#define CONFIG_SYS_LOAD_ADDR 0x83000000 - /* Misc */ #define STR_HELPER(s) #s #define STR(s) STR_HELPER(s) diff --git a/include/configs/evb_px30.h b/include/configs/evb_px30.h index 27201fc..53781ba 100644 --- a/include/configs/evb_px30.h +++ b/include/configs/evb_px30.h @@ -12,6 +12,4 @@ "stdout=serial,vidconsole\0" \ "stderr=serial,vidconsole\0" -#define CONFIG_SUPPORT_EMMC_RPMB - #endif diff --git a/include/configs/evb_rk3308.h b/include/configs/evb_rk3308.h index e8893eb..0273e75 100644 --- a/include/configs/evb_rk3308.h +++ b/include/configs/evb_rk3308.h @@ -8,8 +8,6 @@ #include <configs/rk3308_common.h> -#define CONFIG_SUPPORT_EMMC_RPMB - #define ROCKCHIP_DEVICE_SETTINGS \ "stdout=serial,vidconsole\0" \ "stderr=serial,vidconsole\0" diff --git a/include/configs/evb_rk3568.h b/include/configs/evb_rk3568.h index 2b255a1..a0f2383 100644 --- a/include/configs/evb_rk3568.h +++ b/include/configs/evb_rk3568.h @@ -8,8 +8,6 @@ #include <configs/rk3568_common.h> -#define CONFIG_SUPPORT_EMMC_RPMB - #define ROCKCHIP_DEVICE_SETTINGS \ "stdout=serial,vidconsole\0" \ "stderr=serial,vidconsole\0" diff --git a/include/configs/exynos-common.h b/include/configs/exynos-common.h index 95aaa74..eb26069 100644 --- a/include/configs/exynos-common.h +++ b/include/configs/exynos-common.h @@ -19,8 +19,7 @@ /* Keep L2 Cache Disabled */ /* input clock of PLL: 24MHz input clock */ -#define CONFIG_SYS_CLK_FREQ 24000000 -#define COUNTER_FREQUENCY CONFIG_SYS_CLK_FREQ +#define COUNTER_FREQUENCY 24000000 /* select serial console configuration */ diff --git a/include/configs/exynos78x0-common.h b/include/configs/exynos78x0-common.h index 478a0c4..8d3449f 100644 --- a/include/configs/exynos78x0-common.h +++ b/include/configs/exynos78x0-common.h @@ -67,23 +67,6 @@ #define PHYS_SDRAM_12 (CONFIG_SYS_SDRAM_BASE + (11 * SDRAM_BANK_SIZE)) #define PHYS_SDRAM_12_SIZE SDRAM_BANK_SIZE -#define CONFIG_DEBUG_UART_CLOCK 132710400 - -#define CONFIG_PREBOOT \ -"echo Read pressed buttons status;" \ -"KEY_VOLUMEUP=gpa20;" \ -"KEY_HOME=gpa17;" \ -"KEY_VOLUMEDOWN=gpa21;" \ -"KEY_POWER=gpa00;" \ -"PRESSED=0;" \ -"RELEASED=1;" \ -"if gpio input $KEY_VOLUMEUP; then setenv VOLUME_UP $PRESSED; " \ -"else setenv VOLUME_UP $RELEASED; fi;" \ -"if gpio input $KEY_VOLUMEDOWN; then setenv VOLUME_DOWN $PRESSED; " \ -"else setenv VOLUME_DOWN $RELEASED; fi;" \ -"if gpio input $KEY_HOME; then setenv HOME $PRESSED; else setenv HOME $RELEASED; fi;" \ -"if gpio input $KEY_POWER; then setenv POWER $PRESSED; else setenv POWER $RELEASED; fi;" - #ifndef MEM_LAYOUT_ENV_SETTINGS #define MEM_LAYOUT_ENV_SETTINGS \ "bootm_size=0x10000000\0" \ diff --git a/include/configs/falcon.h b/include/configs/falcon.h index d783faf..1d6a9b9 100644 --- a/include/configs/falcon.h +++ b/include/configs/falcon.h @@ -26,7 +26,6 @@ /* Board Clock */ /* XTAL_CLK : 16.66MHz */ -#define CONFIG_SYS_CLK_FREQ 16666666u /* Generic Timer Definitions (use in assembler source) */ #define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */ diff --git a/include/configs/firefly_rk3308.h b/include/configs/firefly_rk3308.h index 3af2493..28e3a54 100644 --- a/include/configs/firefly_rk3308.h +++ b/include/configs/firefly_rk3308.h @@ -8,8 +8,6 @@ #include <configs/rk3308_common.h> -#define CONFIG_SUPPORT_EMMC_RPMB - #define ROCKCHIP_DEVICE_SETTINGS \ "stdout=serial,vidconsole\0" \ "stderr=serial,vidconsole\0" diff --git a/include/configs/giedi.h b/include/configs/giedi.h index dabb1fb..19a795b 100644 --- a/include/configs/giedi.h +++ b/include/configs/giedi.h @@ -9,9 +9,6 @@ #include "capricorn-common.h" -#undef CONFIG_IDENT_STRING -#define CONFIG_IDENT_STRING GENERATE_CCP_VERSION("01", "07") - /* DDR3 board total DDR is 1 GB */ #undef PHYS_SDRAM_1_SIZE #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1 GB */ diff --git a/include/configs/goflexhome.h b/include/configs/goflexhome.h index 269178c..90e37d9 100644 --- a/include/configs/goflexhome.h +++ b/include/configs/goflexhome.h @@ -15,12 +15,6 @@ #define _CONFIG_GOFLEXHOME_H /* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ -#define CONFIG_KW88F6281 1 /* SOC Name */ - -/* * Default GPIO configuration and LED status */ #define GOFLEXHOME_OE_LOW (~(0)) diff --git a/include/configs/gose.h b/include/configs/gose.h index 60a89e00..01657d7 100644 --- a/include/configs/gose.h +++ b/include/configs/gose.h @@ -30,8 +30,6 @@ #define CONFIG_BITBANGMII_MULTI /* Board Clock */ -#define RMOBILE_XTAL_CLK 20000000u -#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" diff --git a/include/configs/grpeach.h b/include/configs/grpeach.h index 29a446c..fb01c56 100644 --- a/include/configs/grpeach.h +++ b/include/configs/grpeach.h @@ -9,7 +9,6 @@ #define __GRPEACH_H /* Board Clock , P1 clock frequency (XTAL=13.33MHz) */ -#define CONFIG_SYS_CLK_FREQ 66666666 /* Miscellaneous */ #define CONFIG_SYS_PBSIZE 256 diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h index e51f3f2..25c5a97 100644 --- a/include/configs/guruplug.h +++ b/include/configs/guruplug.h @@ -9,20 +9,7 @@ #ifndef _CONFIG_GURUPLUG_H #define _CONFIG_GURUPLUG_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ - -/* - * Standard filesystems - */ - -/* - * mv-plug-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#include "mv-plug-common.h" +#include "mv-common.h" /* * Environment variables configurations diff --git a/include/configs/harmony.h b/include/configs/harmony.h index 5a1e72c..879bd5c 100644 --- a/include/configs/harmony.h +++ b/include/configs/harmony.h @@ -24,7 +24,6 @@ #endif /* NAND support */ -#define CONFIG_TEGRA_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Environment in NAND (which is 512M), aligned to start of last sector */ diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h index b03b45f..9783fd8 100644 --- a/include/configs/ib62x0.h +++ b/include/configs/ib62x0.h @@ -8,12 +8,6 @@ #ifndef _CONFIG_IB62x0_H #define _CONFIG_IB62x0_H -/* - * High level configuration options - */ -#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -#define CONFIG_KW88F6281 /* SOC Name */ - #include "mv-common.h" /* @@ -50,11 +44,4 @@ #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET #endif /* CONFIG_IDE */ -/* - * RTC driver configuration - */ -#ifdef CONFIG_CMD_DATE -#define CONFIG_RTC_MV -#endif /* CONFIG_CMD_DATE */ - #endif /* _CONFIG_IB62x0_H */ diff --git a/include/configs/iconnect.h b/include/configs/iconnect.h index 4903b92..f1aad1e 100644 --- a/include/configs/iconnect.h +++ b/include/configs/iconnect.h @@ -8,12 +8,6 @@ #ifndef _CONFIG_ICONNECT_H #define _CONFIG_ICONNECT_H -/* - * High level configuration options - */ -#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -#define CONFIG_KW88F6281 /* SOC Name */ - #include "mv-common.h" /* diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index 49f5d68..206a57a 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -153,7 +153,6 @@ /* * HW-Watchdog */ -#define CONFIG_WATCHDOG 1 #define CONFIG_SYS_WATCHDOG_VALUE 0xFFFF /* @@ -234,9 +233,6 @@ #define CONFIG_TIMESTAMP #undef CONFIG_SYS_LOADS_BAUD_CHANGE -#define CONFIG_JFFS2_NAND -#define CONFIG_JFFS2_DEV "0" - /* mtdparts command line support */ #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h index c289d69..dffe175 100644 --- a/include/configs/imx27lite-common.h +++ b/include/configs/imx27lite-common.h @@ -103,7 +103,6 @@ #define CONFIG_MXC_NAND_REGS_BASE 0xd8000000 #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0xd8000000 -#define CONFIG_JFFS2_NAND #define CONFIG_MXC_NAND_HWECC /* diff --git a/include/configs/imx7-cm.h b/include/configs/imx7-cm.h index 4a0050b..261ed90 100644 --- a/include/configs/imx7-cm.h +++ b/include/configs/imx7-cm.h @@ -32,7 +32,7 @@ "fdt_file=imx7-cm.dtb\0" \ "fdt_addr=0x83000000\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \ @@ -85,7 +85,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR #define CONFIG_SYS_FSL_USDHC_NUM 2 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 #define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */ /* USB Configs */ diff --git a/include/configs/imx8mm-cl-iot-gate.h b/include/configs/imx8mm-cl-iot-gate.h index 9880587..991839c 100644 --- a/include/configs/imx8mm-cl-iot-gate.h +++ b/include/configs/imx8mm-cl-iot-gate.h @@ -14,8 +14,6 @@ #define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M) #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -81,7 +79,7 @@ "initrd_addr=0x43800000\0" \ "bootm_size=0x10000000\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \ @@ -154,8 +152,6 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #define CONFIG_ETHPRIME "FEC" #define CONFIG_FEC_XCV_TYPE RGMII diff --git a/include/configs/imx8mm_beacon.h b/include/configs/imx8mm_beacon.h index 5d91de3..77f0624 100644 --- a/include/configs/imx8mm_beacon.h +++ b/include/configs/imx8mm_beacon.h @@ -11,8 +11,6 @@ #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -40,7 +38,7 @@ "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ "initrd_addr=0x43800000\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate}" \ @@ -93,9 +91,6 @@ #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */ -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1)) - #define CONFIG_MXC_UART_BASE UART2_BASE_ADDR /* Monitor Command Prompt */ @@ -108,7 +103,6 @@ /* USDHC */ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 /* FEC*/ #define CONFIG_ETHPRIME "FEC" diff --git a/include/configs/imx8mm_evk.h b/include/configs/imx8mm_evk.h index 167ca19..c7022ef 100644 --- a/include/configs/imx8mm_evk.h +++ b/include/configs/imx8mm_evk.h @@ -13,8 +13,6 @@ #define CONFIG_SYS_BOOTM_LEN (64 * SZ_1M) #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -53,7 +51,7 @@ "fdtfile=imx8mm-evk.dtb\0" \ "initrd_addr=0x43800000\0" \ "bootm_size=0x10000000\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ /* Link Definitions */ @@ -85,8 +83,6 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #define CONFIG_ETHPRIME "FEC" #define CONFIG_FEC_XCV_TYPE RGMII diff --git a/include/configs/imx8mm_icore_mx8mm.h b/include/configs/imx8mm_icore_mx8mm.h index 4b22ba1..d75fcf7 100644 --- a/include/configs/imx8mm_icore_mx8mm.h +++ b/include/configs/imx8mm_icore_mx8mm.h @@ -12,8 +12,6 @@ #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -30,9 +28,6 @@ # define CONFIG_SPL_ABORT_ON_RAW_IMAGE #endif /* CONFIG_SPL_BUILD */ -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1)) - #ifndef CONFIG_SPL_BUILD #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 2) \ @@ -71,10 +66,6 @@ #define PHYS_SDRAM_SIZE SZ_2G /* 2GB DDR */ #define CONFIG_SYS_BOOTM_LEN SZ_256M -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END \ - (CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1)) - /* UART */ #define CONFIG_MXC_UART_BASE UART2_BASE_ADDR @@ -88,6 +79,5 @@ /* USDHC */ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 #endif /* __IMX8MM_ICORE_MX8MM_H */ diff --git a/include/configs/imx8mm_venice.h b/include/configs/imx8mm_venice.h index f8d4142..7ab11cc 100644 --- a/include/configs/imx8mm_venice.h +++ b/include/configs/imx8mm_venice.h @@ -11,8 +11,6 @@ #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -105,7 +103,6 @@ /* USDHC */ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 /* FEC */ #define CONFIG_ETHPRIME "eth0" diff --git a/include/configs/imx8mn_beacon.h b/include/configs/imx8mn_beacon.h index 438a382..2843535 100644 --- a/include/configs/imx8mn_beacon.h +++ b/include/configs/imx8mn_beacon.h @@ -11,9 +11,6 @@ #define CONFIG_SPL_MAX_SIZE (148 * SZ_1K) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -46,7 +43,7 @@ "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ "initrd_addr=0x43800000\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console} " \ @@ -124,7 +121,6 @@ /* USDHC */ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 /* ENET Config */ #if defined(CONFIG_FEC_MXC) diff --git a/include/configs/imx8mn_evk.h b/include/configs/imx8mn_evk.h index ab89321..142fc3e 100644 --- a/include/configs/imx8mn_evk.h +++ b/include/configs/imx8mn_evk.h @@ -14,8 +14,6 @@ #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -52,7 +50,7 @@ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ "initrd_addr=0x43800000\0" \ "bootm_size=0x10000000\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ /* Link Definitions */ @@ -84,6 +82,4 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #endif diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h index 30cce1a..b810a55 100644 --- a/include/configs/imx8mp_evk.h +++ b/include/configs/imx8mp_evk.h @@ -14,8 +14,6 @@ #define CONFIG_SPL_MAX_SIZE (152 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD @@ -67,7 +65,7 @@ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ "initrd_addr=0x43800000\0" \ "bootm_size=0x10000000\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ /* Link Definitions */ @@ -100,6 +98,4 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #endif diff --git a/include/configs/imx8mq_cm.h b/include/configs/imx8mq_cm.h index 7206c08..b099004 100644 --- a/include/configs/imx8mq_cm.h +++ b/include/configs/imx8mq_cm.h @@ -14,8 +14,6 @@ #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_STACK 0x187FF0 @@ -61,7 +59,7 @@ "fdt_file=imx8mq-cm.dtb\0" \ "initrd_addr=0x43800000\0" \ "bootm_size=0x10000000\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ /* Link Definitions */ @@ -91,6 +89,4 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #endif diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h index 49a9526..6e1d387 100644 --- a/include/configs/imx8mq_evk.h +++ b/include/configs/imx8mq_evk.h @@ -14,8 +14,6 @@ #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ @@ -72,7 +70,7 @@ "fdt_file=imx8mq-evk.dtb\0" \ "initrd_addr=0x43800000\0" \ "bootm_size=0x10000000\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ /* Link Definitions */ @@ -102,10 +100,4 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - -#define CONFIG_MXC_GPIO - -#define CONFIG_OF_SYSTEM_SETUP - #endif diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h index 9f55b03..1668ca8 100644 --- a/include/configs/imx8mq_phanbell.h +++ b/include/configs/imx8mq_phanbell.h @@ -11,8 +11,6 @@ #define CONFIG_SPL_MAX_SIZE (172 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ @@ -62,7 +60,7 @@ "initrd_addr=0x43800000\0" \ "initrd_high=0xffffffffffffffff\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \ @@ -118,10 +116,6 @@ #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x40000000 /* 1GB DDR */ -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ - (PHYS_SDRAM_SIZE >> 1)) - #define CONFIG_MXC_UART_BASE UART1_BASE_ADDR /* Monitor Command Prompt */ @@ -134,10 +128,4 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - -#define CONFIG_MXC_GPIO - -#define CONFIG_OF_SYSTEM_SETUP - #endif diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h index 6b8d940..884d741 100644 --- a/include/configs/imx8qm_mek.h +++ b/include/configs/imx8qm_mek.h @@ -15,8 +15,6 @@ #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800 #define CONFIG_SPL_STACK 0x013E000 #define CONFIG_SPL_BSS_START_ADDR 0x00128000 @@ -33,9 +31,6 @@ #define CONFIG_REMAKE_ELF -/* Flat Device Tree Definitions */ -#define CONFIG_OF_BOARD_SETUP - #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define USDHC1_BASE_ADDR 0x5B010000 #define USDHC2_BASE_ADDR 0x5B020000 @@ -60,7 +55,7 @@ "initrd_addr=0x83800000\0" \ "initrd_high=0xffffffffffffffff\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \ @@ -127,8 +122,6 @@ /* Default environment is in SD */ -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - /* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board */ #define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */ #define CONFIG_SYS_FSL_USDHC_NUM 2 diff --git a/include/configs/imx8qm_rom7720.h b/include/configs/imx8qm_rom7720.h index 3dea00c..1a55351 100644 --- a/include/configs/imx8qm_rom7720.h +++ b/include/configs/imx8qm_rom7720.h @@ -64,7 +64,7 @@ "fdt_file=imx8qm-rom7720-a1.dtb\0" \ "initrd_addr=0x83800000\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot} earlycon\0 " \ @@ -109,17 +109,6 @@ #define CONFIG_SYS_INIT_SP_ADDR 0x80200000 -/* Default environment is in SD */ - -#ifdef CONFIG_QSPI_BOOT -#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS -#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS -#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE -#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED -#endif - -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - /* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board, * USDHC3 is for SD on base board On DDR4 board, USDHC1 is mux for NAND, * USDHC2 is for SD, USDHC3 is for SD on base board diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h index 76ef124..3900ef1 100644 --- a/include/configs/imx8qxp_mek.h +++ b/include/configs/imx8qxp_mek.h @@ -13,8 +13,6 @@ #ifdef CONFIG_SPL_BUILD #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (1024 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x800 #define CONFIG_SPL_STACK 0x013E000 #define CONFIG_SPL_BSS_START_ADDR 0x00128000 @@ -31,9 +29,6 @@ #define CONFIG_REMAKE_ELF -/* Flat Device Tree Definitions */ -#define CONFIG_OF_BOARD_SETUP - #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define USDHC1_BASE_ADDR 0x5B010000 #define USDHC2_BASE_ADDR 0x5B020000 @@ -58,7 +53,7 @@ "initrd_addr=0x83800000\0" \ "initrd_high=0xffffffffffffffff\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot}\0 " \ @@ -125,8 +120,6 @@ /* Default environment is in SD */ -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - /* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board */ #define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */ #define CONFIG_SYS_FSL_USDHC_NUM 2 diff --git a/include/configs/imx8ulp_evk.h b/include/configs/imx8ulp_evk.h index 501f465..6b25b48 100644 --- a/include/configs/imx8ulp_evk.h +++ b/include/configs/imx8ulp_evk.h @@ -12,9 +12,6 @@ #define CONFIG_SYS_BOOTM_LEN (SZ_64M) #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 #define CONFIG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD @@ -64,7 +61,7 @@ "fdtfile=imx8ulp-evk.dtb\0" \ "initrd_addr=0x83800000\0" \ "bootm_size=0x10000000\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ /* Link Definitions */ diff --git a/include/configs/imxrt1020-evk.h b/include/configs/imxrt1020-evk.h index 64c0f5e..79feab3 100644 --- a/include/configs/imxrt1020-evk.h +++ b/include/configs/imxrt1020-evk.h @@ -11,7 +11,6 @@ #define CONFIG_SYS_INIT_SP_ADDR 0x20240000 -#define CONFIG_SYS_FSL_ERRATUM_ESDHC135 1 #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE 1 #define PHYS_SDRAM 0x80000000 diff --git a/include/configs/imxrt1050-evk.h b/include/configs/imxrt1050-evk.h index 99d25c1..241e872 100644 --- a/include/configs/imxrt1050-evk.h +++ b/include/configs/imxrt1050-evk.h @@ -11,7 +11,6 @@ #define CONFIG_SYS_INIT_SP_ADDR 0x20280000 -#define CONFIG_SYS_FSL_ERRATUM_ESDHC135 1 #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE 1 #define PHYS_SDRAM 0x80000000 diff --git a/include/configs/km/km-mpc8309.h b/include/configs/km/km-mpc8309.h index 869bd9b..98204bd 100644 --- a/include/configs/km/km-mpc8309.h +++ b/include/configs/km/km-mpc8309.h @@ -5,12 +5,6 @@ #define CONFIG_KM_DEF_ARCH "arch=ppc_82xx\0" -/* - * System Clock Setup - */ -#define CONFIG_SYS_CLK_FREQ 66000000 -#define CONFIG_83XX_PCICLK 66000000 - /* QE microcode/firmware address */ /* between the u-boot partition and env */ diff --git a/include/configs/km/km-mpc832x.h b/include/configs/km/km-mpc832x.h index de6e7da..888bb29 100644 --- a/include/configs/km/km-mpc832x.h +++ b/include/configs/km/km-mpc832x.h @@ -1,15 +1,4 @@ /* - * High Level Configuration Options - */ -#define CONFIG_KM8321 /* Keymile PBEC8321 board specific */ - -/* - * System Clock Setup - */ -#define CONFIG_SYS_CLK_FREQ 66000000 -#define CONFIG_83XX_PCICLK 66000000 - -/* * System IO Config */ #define CONFIG_SYS_SICRL SICRL_IRQ_CKS @@ -69,6 +58,3 @@ #define CONFIG_SYS_KMBEC_FPGA_BASE 0xE8000000 #define CONFIG_SYS_KMBEC_FPGA_SIZE 128 - -/* EEprom support */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index cca624e..a485c3a 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -19,12 +19,6 @@ #ifndef _CONFIG_KM_ARM_H #define _CONFIG_KM_ARM_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -#define CONFIG_KW88F6281 /* SOC Name */ - #define CONFIG_NAND_ECC_BCH /* include common defines/options for all Keymile boards */ @@ -74,7 +68,6 @@ #undef CONFIG_I2C_MVTWSI #define CONFIG_SYS_I2C_INIT_BOARD -#define CONFIG_KIRKWOOD_GPIO /* Enable GPIO Support */ #define CONFIG_SYS_NUM_I2C_BUSES 6 #define CONFIG_SYS_I2C_MAX_HOPS 1 #define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \ diff --git a/include/configs/km/pg-wcom-ls102xa.h b/include/configs/km/pg-wcom-ls102xa.h index 743d09e..ba0e4dd 100644 --- a/include/configs/km/pg-wcom-ls102xa.h +++ b/include/configs/km/pg-wcom-ls102xa.h @@ -6,8 +6,6 @@ #ifndef __CONFIG_PG_WCOM_LS102XA_H #define __CONFIG_PG_WCOM_LS102XA_H -#define CONFIG_SYS_FSL_CLK - /* include common defines/options for all Keymile boards */ #include "keymile-common.h" @@ -18,8 +16,6 @@ CONFIG_KM_PHRAM + \ CONFIG_KM_RESERVED_PRAM) >> 10) -#define CONFIG_SYS_CLK_FREQ 66666666 - #define PHYS_SDRAM 0x80000000 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) @@ -40,7 +36,6 @@ * IFC Definitions */ /* NOR Flash Definitions */ -#define CONFIG_FSL_IFC #define CONFIG_SYS_FLASH_BASE 0x60000000 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h index 82c2a12..e58a695 100644 --- a/include/configs/km_kirkwood.h +++ b/include/configs/km_kirkwood.h @@ -34,8 +34,6 @@ /* KM_KIRKWOOD_128M16 */ #elif defined(CONFIG_KM_KIRKWOOD_128M16) #define CONFIG_HOSTNAME "km_kirkwood_128m16" -#undef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg #define CONFIG_KM_DISABLE_PCIE /* KM_NUSA */ @@ -43,21 +41,14 @@ #define CONFIG_HOSTNAME "kmnusa" -#undef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg - /* KMCOGE5UN */ #elif defined(CONFIG_KM_COGE5UN) -#undef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg #define CONFIG_HOSTNAME "kmcoge5un" #define CONFIG_KM_DISABLE_PCIE /* KM_SUSE2 */ #elif defined(CONFIG_KM_SUSE2) #define CONFIG_HOSTNAME "kmsuse2" -#undef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg #define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048" #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE #else diff --git a/include/configs/kmcent2.h b/include/configs/kmcent2.h index 4dbd53c..98e5723 100644 --- a/include/configs/kmcent2.h +++ b/include/configs/kmcent2.h @@ -141,14 +141,11 @@ #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS #define CONFIG_PCIE1 /* PCIE controller 1 */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ /* Environment in parallel NOR-Flash */ #define CONFIG_ENV_TOTAL_SIZE 0x040000 #define ENV_DEL_ADDR 0xebf00000 /*direct for newenv*/ -#define CONFIG_SYS_CLK_FREQ 66666666 - /* * These can be toggled for performance analysis, otherwise use default. */ @@ -362,7 +359,6 @@ * Retain non-DM serial port for debug purposes. */ #if !defined(CONFIG_DM_SERIAL) -#define CONFIG_CONS_INDEX 1 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2) diff --git a/include/configs/kmcoge5ne.h b/include/configs/kmcoge5ne.h index 60fe4ae..8f4685c 100644 --- a/include/configs/kmcoge5ne.h +++ b/include/configs/kmcoge5ne.h @@ -24,12 +24,6 @@ #include "km/km-mpc83xx.h" #include "km/km-mpc8360.h" -/* - * System Clock Setup - */ -#define CONFIG_SYS_CLK_FREQ 66000000 -#define CONFIG_83XX_PCICLK 66000000 - /** * KMCOGE5NE has 512 MB RAM */ diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h index 65a38c5..eca8998 100644 --- a/include/configs/koelsch.h +++ b/include/configs/koelsch.h @@ -30,8 +30,6 @@ #define CONFIG_BITBANGMII_MULTI /* Board Clock */ -#define RMOBILE_XTAL_CLK 20000000u -#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" diff --git a/include/configs/kontron-sl-mx6ul.h b/include/configs/kontron-sl-mx6ul.h index 34304f9..2bac000 100644 --- a/include/configs/kontron-sl-mx6ul.h +++ b/include/configs/kontron-sl-mx6ul.h @@ -59,7 +59,6 @@ #ifdef CONFIG_FSL_USDHC #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR #define CONFIG_SYS_FSL_USDHC_NUM 2 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 #endif #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h index 4152851..448749a 100644 --- a/include/configs/kontron_sl28.h +++ b/include/configs/kontron_sl28.h @@ -30,10 +30,6 @@ /* early stack pointer */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xeff0) -/* memtest command */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 -#define CONFIG_SYS_MEMTEST_END 0x9fffffff - /* SMP */ #define CPU_RELEASE_ADDR secondary_boot_addr @@ -46,8 +42,7 @@ /* serial port */ #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2) -#define CONFIG_SYS_CLK_FREQ 100000000 -#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ / 4) +#define COUNTER_FREQUENCY_REAL (get_board_sys_clk() / 4) /* ethernet */ #define CONFIG_SYS_RX_ETH_BUFFER 8 diff --git a/include/configs/kp_imx53.h b/include/configs/kp_imx53.h index 8ac381c..0983d40 100644 --- a/include/configs/kp_imx53.h +++ b/include/configs/kp_imx53.h @@ -10,8 +10,6 @@ #include <asm/arch/imx-regs.h> #include <linux/sizes.h> -#define CONFIG_SYS_FSL_CLK - /* USB Configs */ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 diff --git a/include/configs/kzm9g.h b/include/configs/kzm9g.h index c3f690c..1eb6daf 100644 --- a/include/configs/kzm9g.h +++ b/include/configs/kzm9g.h @@ -68,9 +68,8 @@ /* Clock */ #define CONFIG_GLOBAL_TIMER -#define CONFIG_SYS_CLK_FREQ (48000000) #define CONFIG_SYS_CPU_CLK (1196000000) -#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_SH_SCIF_CLK_FREQ get_board_sys_clk() #define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */ #define CONFIG_NFS_TIMEOUT 10000UL diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h index 6180563..046f188 100644 --- a/include/configs/lacie_kw.h +++ b/include/configs/lacie_kw.h @@ -6,35 +6,6 @@ #ifndef _CONFIG_LACIE_KW_H #define _CONFIG_LACIE_KW_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -/* SoC name */ -#if defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2) -#define CONFIG_KW88F6192 -#else -#define CONFIG_KW88F6281 -#endif - -/* - * SDRAM configuration - */ - -/* - * Different SDRAM configuration and size for some of the boards derived - * from the Network Space v2 - */ -#if defined(CONFIG_INETSPACE_V2) -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-is2.cfg -#elif defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2) -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-ns2l.cfg -#endif - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ #include "mv-common.h" /* Remove or override few declarations from mv-common.h */ @@ -70,7 +41,6 @@ /* * Enable GPI0 support */ -#define CONFIG_KIRKWOOD_GPIO /* * Enable I2C support diff --git a/include/configs/lager.h b/include/configs/lager.h index c5001e3..4c291aa 100644 --- a/include/configs/lager.h +++ b/include/configs/lager.h @@ -31,8 +31,6 @@ #define CONFIG_BITBANGMII_MULTI /* Board Clock */ -#define RMOBILE_XTAL_CLK 20000000u -#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h index 0e4d134..b912db1 100644 --- a/include/configs/legoev3.h +++ b/include/configs/legoev3.h @@ -18,7 +18,6 @@ * SoC Configuration */ #define CONFIG_SYS_EXCEPTION_VECTORS_HIGH -#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) diff --git a/include/configs/liteboard.h b/include/configs/liteboard.h index 2d051e5..3a8dd47 100644 --- a/include/configs/liteboard.h +++ b/include/configs/liteboard.h @@ -23,8 +23,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR #endif -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ @@ -36,7 +34,7 @@ "boot_fdt=try\0" \ "ip_dyn=yes\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ diff --git a/include/configs/ls1012a2g5rdb.h b/include/configs/ls1012a2g5rdb.h index ffc23de..bda4283 100644 --- a/include/configs/ls1012a2g5rdb.h +++ b/include/configs/ls1012a2g5rdb.h @@ -14,8 +14,6 @@ #define CONFIG_SYS_SDRAM_SIZE 0x40000000 /* SATA */ -#define CONFIG_LIBATA -#define CONFIG_SCSI_AHCI #define CONFIG_SCSI_AHCI_PLAT #define CONFIG_SYS_SATA AHCI_BASE_ADDR diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h index 88986f9..5d56100 100644 --- a/include/configs/ls1012a_common.h +++ b/include/configs/ls1012a_common.h @@ -10,8 +10,6 @@ #include <asm/arch/stream_id_lsch2.h> #include <linux/sizes.h> -#define CONFIG_SYS_CLK_FREQ 125000000 - #ifdef CONFIG_TFABOOT #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE #else @@ -45,11 +43,6 @@ /* I2C */ /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h index 391f0f3..c61865c 100644 --- a/include/configs/ls1012afrwy.h +++ b/include/configs/ls1012afrwy.h @@ -8,9 +8,6 @@ #include "ls1012a_common.h" -#undef CONFIG_SYS_BOARD -#define CONFIG_SYS_BOARD "ls1012afrwy" - /* Board Rev*/ #define BOARD_REV_A_B 0x0 #define BOARD_REV_C 0x00080000 diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h index 98c0433..cbcb3f7 100644 --- a/include/configs/ls1012aqds.h +++ b/include/configs/ls1012aqds.h @@ -75,19 +75,16 @@ DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \ DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \ DSPI_CTAR_DT(0)) -#define CONFIG_SPI_FLASH_SST /* cs1 */ #define CONFIG_SYS_DSPI_CTAR2 (DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\ DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \ DSPI_CTAR_CSSCK(0) | DSPI_CTAR_ASC(0) | \ DSPI_CTAR_DT(0)) -#define CONFIG_SPI_FLASH_STMICRO /* cs2 */ #define CONFIG_SYS_DSPI_CTAR3 (DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\ DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \ DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \ DSPI_CTAR_DT(0)) -#define CONFIG_SPI_FLASH_EON /* cs3 */ #define CONFIG_PCIE1 /* PCIE controller 1 */ diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h index 222caa1..7b4044f 100644 --- a/include/configs/ls1021aiot.h +++ b/include/configs/ls1021aiot.h @@ -9,13 +9,9 @@ #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR -#define CONFIG_SYS_FSL_CLK - #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE -#define CONFIG_SYS_CLK_FREQ 100000000 - /* * DDR: 800 MHz ( 1600 MT/s data rate ) */ @@ -48,8 +44,6 @@ #define SDRAM_CFG_BI 0x00000001 #ifdef CONFIG_SD_BOOT -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8 - #define CONFIG_SPL_MAX_SIZE 0x1a000 #define CONFIG_SPL_STACK 0x1001d000 #define CONFIG_SPL_PAD_TO 0x1c000 @@ -100,9 +94,6 @@ CONFIG_SYS_SCSI_MAX_LUN) /* SPI */ -#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_SPI_FLASH_SPANSION -#endif /* * eTSEC @@ -174,9 +165,6 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #endif -#define CONFIG_OF_BOARD_SETUP -#define CONFIG_OF_STDOUT_VIA_ALIAS - #include <asm/fsl_secure_boot.h> #endif diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 27b97ff..7ef42a6 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -9,22 +9,13 @@ #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR -#define CONFIG_SYS_FSL_CLK - #define CONFIG_DEEP_SLEEP #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_SYS_CLK_FREQ 100000000 #define CONFIG_QIXIS_I2C_ACCESS -#else -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() #endif #ifdef CONFIG_SD_BOOT @@ -76,7 +67,6 @@ unsigned long get_board_sys_clk(void); * IFC Definitions */ #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_FSL_IFC #define CONFIG_SYS_FLASH_BASE 0x60000000 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE @@ -298,11 +288,6 @@ unsigned long get_board_sys_clk(void); */ /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif /* EEPROM */ #define CONFIG_SYS_I2C_EEPROM_NXID diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h index f70b6e9..5f6c2a0 100644 --- a/include/configs/ls1021atsn.h +++ b/include/configs/ls1021atsn.h @@ -8,8 +8,6 @@ #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR -#define CONFIG_SYS_FSL_CLK - #define CONFIG_DEEP_SLEEP #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR @@ -18,8 +16,6 @@ /* XHCI Support - enabled by default */ #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 -#define CONFIG_SYS_CLK_FREQ 100000000 - #define DDR_SDRAM_CFG 0x470c0008 #define DDR_CS0_BNDS 0x008000bf #define DDR_CS0_CONFIG 0x80014302 @@ -75,7 +71,6 @@ #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */ #endif -#define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM 0x80000000 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index b7c2cd7..75fab43 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -9,15 +9,11 @@ #define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR -#define CONFIG_SYS_FSL_CLK - #define CONFIG_DEEP_SLEEP #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE -#define CONFIG_SYS_CLK_FREQ 100000000 - #define DDR_SDRAM_CFG 0x470c0008 #define DDR_CS0_BNDS 0x008000bf #define DDR_CS0_CONFIG 0x80014302 @@ -89,7 +85,6 @@ * IFC Definitions */ #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_FSL_IFC #define CONFIG_SYS_FLASH_BASE 0x60000000 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE @@ -191,11 +186,6 @@ */ /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif /* EEPROM */ #define CONFIG_SYS_I2C_EEPROM_NXID diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h index b443180..f47bc73 100644 --- a/include/configs/ls1028a_common.h +++ b/include/configs/ls1028a_common.h @@ -7,7 +7,6 @@ #define __L1028A_COMMON_H #define CONFIG_REMAKE_ELF -#define CONFIG_MP #include <asm/arch/stream_id_lsch3.h> #include <asm/arch/config.h> @@ -32,11 +31,6 @@ #define COUNTER_FREQUENCY 25000000 /* 25MHz */ /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif /* I2C */ diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h index fe20363..8e3bd77 100644 --- a/include/configs/ls1028aqds.h +++ b/include/configs/ls1028aqds.h @@ -8,8 +8,7 @@ #include "ls1028a_common.h" -#define CONFIG_SYS_CLK_FREQ 100000000 -#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ / 4) +#define COUNTER_FREQUENCY_REAL (get_board_sys_clk() / 4) /* DDR */ #define CONFIG_DIMM_SLOTS_PER_CTLR 2 diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h index 348db1e..5ce9ebb 100644 --- a/include/configs/ls1028ardb.h +++ b/include/configs/ls1028ardb.h @@ -8,8 +8,7 @@ #include "ls1028a_common.h" -#define CONFIG_SYS_CLK_FREQ 100000000 -#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ / 4) +#define COUNTER_FREQUENCY_REAL (get_board_sys_clk() / 4) #define CONFIG_SYS_RTC_BUS_NUM 0 diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index b3f9117..3b4f822 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -112,17 +112,11 @@ #endif /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif /* IFC */ #ifndef SPL_NO_IFC #if defined(CONFIG_TFABOOT) || \ (!defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)) -#define CONFIG_FSL_IFC /* * CONFIG_SYS_FLASH_BASE has the final address (core view) * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view) @@ -154,13 +148,6 @@ #endif /* DSPI */ -#ifndef SPL_NO_DSPI -#ifdef CONFIG_FSL_DSPI -#define CONFIG_SPI_FLASH_STMICRO /* cs0 */ -#define CONFIG_SPI_FLASH_SST /* cs1 */ -#define CONFIG_SPI_FLASH_EON /* cs2 */ -#endif -#endif /* FMan ucode */ #ifndef SPL_NO_FMAN diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h index ee56605..80eff7b 100644 --- a/include/configs/ls1043aqds.h +++ b/include/configs/ls1043aqds.h @@ -8,12 +8,6 @@ #include "ls1043a_common.h" -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() - #define CONFIG_LAYERSCAPE_NS_ACCESS #define CONFIG_DIMM_SLOTS_PER_CTLR 1 @@ -330,12 +324,6 @@ unsigned long get_board_sys_clk(void); #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 -#define CONFIG_VID_FLS_ENV "ls1043aqds_vdd_mv" -#ifndef CONFIG_SPL_BUILD -#define CONFIG_VID -#endif -#define CONFIG_VOL_MONITOR_IR36021_SET -#define CONFIG_VOL_MONITOR_INA220 /* The lowest and highest voltage allowed for LS1043AQDS */ #define VDD_MV_MIN 819 #define VDD_MV_MAX 1212 diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index 0d071c4..7b6d193 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -8,8 +8,6 @@ #include "ls1043a_common.h" -#define CONFIG_SYS_CLK_FREQ 100000000 - #define CONFIG_LAYERSCAPE_NS_ACCESS #define CONFIG_DIMM_SLOTS_PER_CTLR 1 diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index 515f420..d07d27d 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -110,11 +110,6 @@ #endif /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif /* I2C */ diff --git a/include/configs/ls1046afrwy.h b/include/configs/ls1046afrwy.h index fa37c68..14ad84a 100644 --- a/include/configs/ls1046afrwy.h +++ b/include/configs/ls1046afrwy.h @@ -8,8 +8,6 @@ #include "ls1046a_common.h" -#define CONFIG_SYS_CLK_FREQ 100000000 - #define CONFIG_LAYERSCAPE_NS_ACCESS #define CONFIG_DIMM_SLOTS_PER_CTLR 1 @@ -17,8 +15,6 @@ #define CONFIG_SYS_UBOOT_BASE 0x40100000 -/* IFC */ -#define CONFIG_FSL_IFC /* * NAND Flash Definitions */ diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h index 3a502bc..97bf418 100644 --- a/include/configs/ls1046aqds.h +++ b/include/configs/ls1046aqds.h @@ -8,12 +8,6 @@ #include "ls1046a_common.h" -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() - #define CONFIG_LAYERSCAPE_NS_ACCESS #define CONFIG_DIMM_SLOTS_PER_CTLR 1 @@ -43,7 +37,6 @@ unsigned long get_board_sys_clk(void); /* IFC */ #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_FSL_IFC /* * CONFIG_SYS_FLASH_BASE has the final address (core view) * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view) @@ -339,12 +332,6 @@ unsigned long get_board_sys_clk(void); #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 -#define CONFIG_VID_FLS_ENV "ls1046aqds_vdd_mv" -#ifndef CONFIG_SPL_BUILD -#define CONFIG_VID -#endif -#define CONFIG_VOL_MONITOR_IR36021_SET -#define CONFIG_VOL_MONITOR_INA220 /* The lowest and highest voltage allowed for LS1046AQDS */ #define VDD_MV_MIN 819 #define VDD_MV_MAX 1212 diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h index c27eb73..8ed1dce 100644 --- a/include/configs/ls1046ardb.h +++ b/include/configs/ls1046ardb.h @@ -9,8 +9,6 @@ #include "ls1046a_common.h" -#define CONFIG_SYS_CLK_FREQ 100000000 - #define CONFIG_LAYERSCAPE_NS_ACCESS #define CONFIG_DIMM_SLOTS_PER_CTLR 1 @@ -27,14 +25,6 @@ #define CONFIG_SYS_SPL_ARGS_ADDR 0x90000000 #endif -#ifndef SPL_NO_IFC -/* IFC */ -#define CONFIG_FSL_IFC -/* - * NAND Flash Definitions - */ -#endif - #define CONFIG_SYS_NAND_BASE 0x7e800000 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index 140362c..2e52108 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -49,11 +49,6 @@ #define CPU_RELEASE_ADDR secondary_boot_addr /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif /* I2C */ @@ -63,11 +58,6 @@ #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2) -#if !defined(SPL_NO_IFC) || defined(CONFIG_TARGET_LS1088AQDS) -/* IFC */ -#define CONFIG_FSL_IFC -#endif - /* * During booting, IFC is mapped at the region of 0x30000000. * But this region is limited to 256MB. To accommodate NOR, promjet diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h index d001acf..5912fe9 100644 --- a/include/configs/ls1088aqds.h +++ b/include/configs/ls1088aqds.h @@ -8,22 +8,14 @@ #include "ls1088a_common.h" - -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) #define CONFIG_QIXIS_I2C_ACCESS #define SYS_NO_FLASH - -#define CONFIG_SYS_CLK_FREQ 100000000 #else #define CONFIG_QIXIS_I2C_ACCESS -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() #endif -#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ/4) +#define COUNTER_FREQUENCY_REAL (get_board_sys_clk()/4) #define COUNTER_FREQUENCY 25000000 /* 25MHz */ #define CONFIG_DIMM_SLOTS_PER_CTLR 1 @@ -298,16 +290,10 @@ unsigned long get_board_sys_clk(void); #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 #define I2C_SVDD_MONITOR_ADDR 0x4F -#define CONFIG_VID_FLS_ENV "ls1088aqds_vdd_mv" -#define CONFIG_VID - /* The lowest and highest voltage allowed for LS1088AQDS */ #define VDD_MV_MIN 819 #define VDD_MV_MAX 1212 -#define CONFIG_VOL_MONITOR_LTC3882_SET -#define CONFIG_VOL_MONITOR_LTC3882_READ - #define PWM_CHANNEL0 0x0 /* @@ -321,9 +307,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_SYS_EEPROM_BUS_NUM 0 #ifdef CONFIG_FSL_DSPI -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_SPI_FLASH_SST -#define CONFIG_SPI_FLASH_EON #if !defined(CONFIG_TFABOOT) && \ !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) #endif diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index 9351042..400b8ad 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -16,7 +16,6 @@ #define SYS_NO_FLASH #endif -#define CONFIG_SYS_CLK_FREQ 100000000 #define COUNTER_FREQUENCY_REAL 25000000 /* 25MHz */ #define COUNTER_FREQUENCY 25000000 /* 25MHz */ @@ -197,16 +196,10 @@ #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 #define I2C_SVDD_MONITOR_ADDR 0x4F -#define CONFIG_VID_FLS_ENV "ls1088ardb_vdd_mv" -#define CONFIG_VID - /* The lowest and highest voltage allowed for LS1088ARDB */ #define VDD_MV_MIN 819 #define VDD_MV_MAX 1212 -#define CONFIG_VOL_MONITOR_LTC3882_SET -#define CONFIG_VOL_MONITOR_LTC3882_READ - #define PWM_CHANNEL0 0x0 /* diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index 0ca03e0..eea6ce5 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -61,11 +61,6 @@ #define COUNTER_FREQUENCY 25000000 /* 25MHz */ /* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif /* I2C */ @@ -74,9 +69,6 @@ #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK (get_serial_clock()) -/* IFC */ -#define CONFIG_FSL_IFC - /* * During booting, IFC is mapped at the region of 0x30000000. * But this region is limited to 256MB. To accommodate NOR, promjet diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index e67dee0..b0a05dd 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -9,18 +9,13 @@ #include "ls2080a_common.h" -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - #ifdef CONFIG_FSL_QSPI #define CONFIG_QIXIS_I2C_ACCESS #define CONFIG_SYS_I2C_IFDR_DIV 0x7e #endif #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() -#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ/4) +#define COUNTER_FREQUENCY_REAL (get_board_sys_clk()/4) #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #define SPD_EEPROM_ADDRESS1 0x51 @@ -256,15 +251,7 @@ unsigned long get_board_sys_clk(void); #define I2C_MUX_CH_DEFAULT 0x8 /* SPI */ -#ifdef CONFIG_FSL_DSPI -#define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_SPI_FLASH_SST -#define CONFIG_SPI_FLASH_EON -#endif -#ifdef CONFIG_FSL_QSPI -#define CONFIG_SPI_FLASH_SPANSION -#endif /* * Verify QSPI when boot from NAND, QIXIS brdcfg9 need configure. * If boot from on-board NAND, ISO1 = 1, ISO2 = 0, IBOOT = 0 @@ -285,9 +272,7 @@ unsigned long get_board_sys_clk(void); */ #define RTC #define CONFIG_RTC_DS3231 1 -#define CONFIG_RTC_ENABLE_32KHZ_OUTPUT #define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#define CONFIG_RTC_ENABLE_32KHZ_OUTPUT /* EEPROM */ #define CONFIG_SYS_I2C_EEPROM_NXID diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 674d27f..a54387e 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -17,13 +17,7 @@ #define I2C_MUX_CH_VOL_MONITOR 0xa #define I2C_VOL_MONITOR_ADDR 0x38 -#define CONFIG_VOL_MONITOR_IR36021_READ -#define CONFIG_VOL_MONITOR_IR36021_SET -#define CONFIG_VID_FLS_ENV "ls2080ardb_vdd_mv" -#ifndef CONFIG_SPL_BUILD -#define CONFIG_VID -#endif /* step the IR regulator in 5mV increments */ #define IR_VDD_STEP_DOWN 5 #define IR_VDD_STEP_UP 5 @@ -31,12 +25,7 @@ #define VDD_MV_MIN 819 #define VDD_MV_MAX 1212 -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() -#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ/4) +#define COUNTER_FREQUENCY_REAL (get_board_sys_clk()/4) #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #define SPD_EEPROM_ADDRESS1 0x51 @@ -258,9 +247,6 @@ unsigned long get_board_sys_clk(void); #define I2C_MUX_CH_DEFAULT 0x8 /* SPI */ -#if defined(CONFIG_FSL_DSPI) -#define CONFIG_SPI_FLASH_STMICRO -#endif /* * RTC configuration diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index 7294a3c..afa0206 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -8,23 +8,8 @@ #define _CONFIG_LSXL_H /* - * Version number information - */ -#if defined(CONFIG_LSCHLV2) -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg -#elif defined(CONFIG_LSXHL) -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg -#else -#error "unknown board" -#endif - -/* * General configuration options */ -#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -#define CONFIG_KW88F6281 /* SOC Name */ - -#define CONFIG_KIRKWOOD_GPIO #include "mv-common.h" diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h index 0710004..e285109 100644 --- a/include/configs/lx2160a_common.h +++ b/include/configs/lx2160a_common.h @@ -11,7 +11,6 @@ #include <asm/arch/soc.h> #define CONFIG_REMAKE_ELF -#define CONFIG_FSL_TZPC_BP147 #define CONFIG_FSL_MEMAC #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE @@ -105,7 +104,6 @@ /* PCI */ #ifdef CONFIG_PCI -#define CONFIG_SYS_PCI_64BIT #define CONFIG_PCI_SCAN_SHOW #endif @@ -128,19 +126,7 @@ #endif #endif -/* GPIO */ -#ifdef CONFIG_DM_GPIO -#ifndef CONFIG_MPC8XXX_GPIO -#define CONFIG_MPC8XXX_GPIO -#endif -#endif - -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -#endif - -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() -#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ / 4) +#define COUNTER_FREQUENCY_REAL (get_board_sys_clk() / 4) #define CONFIG_HWCONFIG #define HWCONFIG_BUFFER_SIZE 128 diff --git a/include/configs/lx2160aqds.h b/include/configs/lx2160aqds.h index a04bbb6..a07ebeb 100644 --- a/include/configs/lx2160aqds.h +++ b/include/configs/lx2160aqds.h @@ -8,12 +8,6 @@ #include "lx2160a_common.h" -/* VID */ -#define CONFIG_VID_FLS_ENV "lx2160aqds_vdd_mv" -#define CONFIG_VID -#define CONFIG_VOL_MONITOR_LTC3882_SET -#define CONFIG_VOL_MONITOR_LTC3882_READ - /* RTC */ #define CONFIG_SYS_RTC_BUS_NUM 0 diff --git a/include/configs/lx2160ardb.h b/include/configs/lx2160ardb.h index 4fd3e54..a8a9f82 100644 --- a/include/configs/lx2160ardb.h +++ b/include/configs/lx2160ardb.h @@ -8,12 +8,6 @@ #include "lx2160a_common.h" -/* VID */ -#define CONFIG_VID_FLS_ENV "lx2160ardb_vdd_mv" -#define CONFIG_VID -#define CONFIG_VOL_MONITOR_LTC3882_SET -#define CONFIG_VOL_MONITOR_LTC3882_READ - /* RTC */ #define CONFIG_SYS_RTC_BUS_NUM 4 diff --git a/include/configs/lx2162aqds.h b/include/configs/lx2162aqds.h index 67c469c..c2fa579 100644 --- a/include/configs/lx2162aqds.h +++ b/include/configs/lx2162aqds.h @@ -12,12 +12,6 @@ #undef CONFIG_USB_MAX_CONTROLLER_COUNT #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 -/* Voltage monitor on channel 2*/ -#define CONFIG_VID_FLS_ENV "lx2162aqds_vdd_mv" -#define CONFIG_VID -#define CONFIG_VOL_MONITOR_LTC3882_SET -#define CONFIG_VOL_MONITOR_LTC3882_READ - /* RTC */ #define CONFIG_SYS_RTC_BUS_NUM 0 diff --git a/include/configs/m53menlo.h b/include/configs/m53menlo.h index 2844553..c2345e8 100644 --- a/include/configs/m53menlo.h +++ b/include/configs/m53menlo.h @@ -11,8 +11,6 @@ #include <asm/arch/imx-regs.h> -#define CONFIG_SYS_FSL_CLK - #define CONFIG_TIMESTAMP /* Print image info with timestamp */ /* @@ -204,9 +202,4 @@ "fi ; " \ "fi\0" -#if defined(CONFIG_SPL_BUILD) -#undef CONFIG_WATCHDOG -#define CONFIG_HW_WATCHDOG -#endif - #endif /* __M53MENLO_CONFIG_H__ */ diff --git a/include/configs/medcom-wide.h b/include/configs/medcom-wide.h index 84b998e..b35ba59 100644 --- a/include/configs/medcom-wide.h +++ b/include/configs/medcom-wide.h @@ -19,7 +19,6 @@ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE /* NAND support */ -#define CONFIG_TEGRA_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Environment in NAND, aligned to start of last sector */ diff --git a/include/configs/meson64.h b/include/configs/meson64.h index cb202d5..44f2967 100644 --- a/include/configs/meson64.h +++ b/include/configs/meson64.h @@ -29,7 +29,6 @@ #define STDIN_CFG "serial" #endif -#define CONFIG_CPU_ARMV8 #define CONFIG_REMAKE_ELF #define CONFIG_SYS_MAXARGS 32 #define CONFIG_SYS_CBSIZE 1024 diff --git a/include/configs/mt8183.h b/include/configs/mt8183.h index ebd2b32..2b4e976 100644 --- a/include/configs/mt8183.h +++ b/include/configs/mt8183.h @@ -11,7 +11,6 @@ #include <linux/sizes.h> -#define CONFIG_CPU_ARMV8 #define COUNTER_FREQUENCY 13000000 #define CONFIG_SYS_NS16550_SERIAL diff --git a/include/configs/mt8512.h b/include/configs/mt8512.h index 8882a5a..9c443db 100644 --- a/include/configs/mt8512.h +++ b/include/configs/mt8512.h @@ -13,8 +13,6 @@ #define CONFIG_SYS_NONCACHED_MEMORY SZ_1M -#define CONFIG_CPU_ARMV8 - #define COUNTER_FREQUENCY 13000000 #define CONFIG_SYS_BOOTM_LEN SZ_64M diff --git a/include/configs/mt8516.h b/include/configs/mt8516.h index 12840b8..47132c1 100644 --- a/include/configs/mt8516.h +++ b/include/configs/mt8516.h @@ -11,7 +11,6 @@ #include <linux/sizes.h> -#define CONFIG_CPU_ARMV8 #define COUNTER_FREQUENCY 13000000 #define CONFIG_SYS_NS16550_SERIAL diff --git a/include/configs/mt8518.h b/include/configs/mt8518.h index 593c6a1..49ee926 100644 --- a/include/configs/mt8518.h +++ b/include/configs/mt8518.h @@ -13,8 +13,6 @@ #define CONFIG_SYS_NONCACHED_MEMORY SZ_1M -#define CONFIG_CPU_ARMV8 - #define COUNTER_FREQUENCY 13000000 /* DRAM definition */ diff --git a/include/configs/mv-plug-common.h b/include/configs/mv-plug-common.h deleted file mode 100644 index d38d987..0000000 --- a/include/configs/mv-plug-common.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2009-2015 - * Marvell Semiconductor <www.marvell.com> - */ - -#ifndef _CONFIG_MARVELL_PLUG_H -#define _CONFIG_MARVELL_PLUG_H - -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_KW88F6281 1 /* SOC Name */ - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#include "mv-common.h" - -#endif /* _CONFIG_MARVELL_PLUG_H */ diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index f1a87fa..fd42d2b 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -12,8 +12,6 @@ /* High Level Configuration Options */ -#define CONFIG_SYS_FSL_CLK - #include <asm/arch/imx-regs.h> /* diff --git a/include/configs/mx53cx9020.h b/include/configs/mx53cx9020.h index f03e425..16c2241 100644 --- a/include/configs/mx53cx9020.h +++ b/include/configs/mx53cx9020.h @@ -14,8 +14,6 @@ #include <asm/arch/imx-regs.h> -#define CONFIG_SYS_FSL_CLK - #define CONFIG_MXC_UART_BASE UART2_BASE #define CONFIG_FPGA_COUNT 1 diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 92c75f5..a972410 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -11,8 +11,6 @@ #include <asm/arch/imx-regs.h> -#define CONFIG_SYS_FSL_CLK - #define CONFIG_MXC_UART_BASE UART1_BASE /* MMC Configs */ diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h index 80487e0..8f8dfe9 100644 --- a/include/configs/mx53ppd.h +++ b/include/configs/mx53ppd.h @@ -11,8 +11,6 @@ #include <asm/arch/imx-regs.h> -#define CONFIG_SYS_FSL_CLK - /* USB Configs */ #define CONFIG_MXC_USB_PORT 1 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index 0ae8305..5ff931e 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -27,8 +27,6 @@ #include <asm/arch/imx-regs.h> #include <asm/mach-imx/gpio.h> -#define CONFIG_SYS_FSL_CLK - /* Miscellaneous configurable options */ #define CONFIG_SYS_CBSIZE 512 #define CONFIG_SYS_MAXARGS 32 diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h index 5d74964..90b053b 100644 --- a/include/configs/mx6ul_14x14_evk.h +++ b/include/configs/mx6ul_14x14_evk.h @@ -33,8 +33,6 @@ #endif -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ @@ -48,7 +46,7 @@ "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ diff --git a/include/configs/mx6ullevk.h b/include/configs/mx6ullevk.h index 5e857bd..6bcca11 100644 --- a/include/configs/mx6ullevk.h +++ b/include/configs/mx6ullevk.h @@ -30,8 +30,6 @@ #endif #endif -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ @@ -44,7 +42,7 @@ "ip_dyn=yes\0" \ "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ @@ -124,8 +122,6 @@ #define CONFIG_IOMUX_LPSR -#define CONFIG_SOFT_SPI - #ifdef CONFIG_CMD_NET #define CONFIG_FEC_ENET_DEV 1 #if (CONFIG_FEC_ENET_DEV == 0) diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h index ffe8c75..2e976df 100644 --- a/include/configs/mx7_common.h +++ b/include/configs/mx7_common.h @@ -17,7 +17,6 @@ #define CONFIG_MXC_GPT_HCLK #define CONFIG_SC_TIMER_CLK 8000000 /* 8Mhz */ #define COUNTER_FREQUENCY CONFIG_SC_TIMER_CLK -#define CONFIG_SYS_FSL_CLK #define CONFIG_SYS_BOOTM_LEN 0x1000000 diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h index f11e2e3..a853e2b 100644 --- a/include/configs/mx7dsabresd.h +++ b/include/configs/mx7dsabresd.h @@ -17,8 +17,6 @@ /* MMC Config*/ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #ifdef CONFIG_IMX_BOOTAUX /* Set to QSPI1 A flash at default */ #define CONFIG_SYS_AUXCORE_BOOTDATA 0x60000000 diff --git a/include/configs/mx7ulp_com.h b/include/configs/mx7ulp_com.h index 58d48ed..8c4d942 100644 --- a/include/configs/mx7ulp_com.h +++ b/include/configs/mx7ulp_com.h @@ -25,7 +25,6 @@ */ #define CONFIG_BOARD_SIZE_LIMIT 785408 #define CONFIG_MMCROOT "/dev/mmcblk0p2" -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 /* Using ULP WDOG for reset */ #define WDOG_BASE_ADDR WDG1_RBASE @@ -48,7 +47,7 @@ "fdt_file=imx7ulp-com.dtb\0" \ "fdt_addr=0x63000000\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \ diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h index 7540a77..8f2cbc6 100644 --- a/include/configs/mx7ulp_evk.h +++ b/include/configs/mx7ulp_evk.h @@ -15,7 +15,6 @@ #define CONFIG_SYS_BOOTM_LEN 0x1000000 #define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */ -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 /* Using ULP WDOG for reset */ #define WDOG_BASE_ADDR WDG1_RBASE @@ -48,7 +47,7 @@ "earlycon=lpuart32,0x402D0010\0" \ "ip_dyn=yes\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ diff --git a/include/configs/nas220.h b/include/configs/nas220.h index 9f89cca..815f81f 100644 --- a/include/configs/nas220.h +++ b/include/configs/nas220.h @@ -11,12 +11,6 @@ #ifndef _CONFIG_NAS220_H #define _CONFIG_NAS220_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 /* #define CPU Core subversion */ -#define CONFIG_KW88F6192 /* SOC Name */ - /* power-on led, regulator, sata0, sata1 */ #define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)) #define NAS220_GE_OE_VAL_HIGH (0) @@ -60,15 +54,7 @@ #endif /* CONFIG_CMD_NET */ /* - * File system - */ -#define CONFIG_JFFS2_NAND -#define CONFIG_JFFS2_LZO - -/* * EFI partition */ -#define CONFIG_KIRKWOOD_GPIO - #endif /* _CONFIG_NAS220_H */ diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index c575798..0811019 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -21,7 +21,6 @@ /* * High Level Configuration Options */ -#define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */ #include <asm/arch/cpu.h> /* get chip and board defs */ #include <asm/arch/omap.h> diff --git a/include/configs/nsa310s.h b/include/configs/nsa310s.h index cf52a6d..8cc9ca6 100644 --- a/include/configs/nsa310s.h +++ b/include/configs/nsa310s.h @@ -9,11 +9,6 @@ #ifndef _CONFIG_NSA310S_H #define _CONFIG_NSA310S_H -/* high level configuration options */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ -#define CONFIG_KW88F6192 1 /* SOC Name */ -#define CONFIG_KW88F6702 1 /* SOC Name */ - #include "mv-common.h" /* environment variables configuration */ @@ -41,9 +36,4 @@ #define CONFIG_LBA48 #endif /* CONFIG_SATA */ -/* RTC driver configuration */ -#ifdef CONFIG_CMD_DATE -#define CONFIG_RTC_MV -#endif /* CONFIG_CMD_DATE */ - #endif /* _CONFIG_NSA310S_H */ diff --git a/include/configs/octeontx2_common.h b/include/configs/octeontx2_common.h index bc21b79..536dff2 100644 --- a/include/configs/octeontx2_common.h +++ b/include/configs/octeontx2_common.h @@ -7,8 +7,6 @@ #ifndef __OCTEONTX2_COMMON_H__ #define __OCTEONTX2_COMMON_H__ -#define CONFIG_SUPPORT_RAW_INITRD - /** Maximum size of image supported for bootm (and bootable FIT images) */ #define CONFIG_SYS_BOOTM_LEN (256 << 20) @@ -43,7 +41,6 @@ #if defined(CONFIG_MMC_OCTEONTX) #define MMC_SUPPORTS_TUNING /** EMMC specific defines */ -#define CONFIG_SUPPORT_EMMC_RPMB #endif #endif /* __OCTEONTX2_COMMON_H__ */ diff --git a/include/configs/octeontx_common.h b/include/configs/octeontx_common.h index 46908be..8185f4b 100644 --- a/include/configs/octeontx_common.h +++ b/include/configs/octeontx_common.h @@ -61,12 +61,6 @@ # define CONFIG_SYS_64BIT_LBA #endif -/***** SPI Defines *********/ -#ifdef CONFIG_DM_SPI_FLASH -# define CONFIG_SF_DEFAULT_BUS 0 -# define CONFIG_SF_DEFAULT_CS 0 -#endif - /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 /** Console I/O Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE @@ -76,9 +70,6 @@ #define CONFIG_SYS_MMC_MAX_BLK_COUNT 8192 /** EMMC specific defines */ -#if defined(CONFIG_MMC_OCTEONTX) -#define CONFIG_SUPPORT_EMMC_RPMB -#endif #if defined(CONFIG_NAND_OCTEONTX) /*#define CONFIG_MTD_CONCAT */ diff --git a/include/configs/odroid.h b/include/configs/odroid.h index 1a63f46..ed9b41d 100644 --- a/include/configs/odroid.h +++ b/include/configs/odroid.h @@ -13,7 +13,6 @@ #include <configs/exynos4-common.h> -#define CONFIG_SYS_L2CACHE_OFF #ifndef CONFIG_SYS_L2CACHE_OFF #define CONFIG_SYS_L2_PL310 #define CONFIG_SYS_PL310_BASE 0x10502000 diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h index 70481b5..a482598 100644 --- a/include/configs/odroid_xu3.h +++ b/include/configs/odroid_xu3.h @@ -80,8 +80,6 @@ * Need to override existing one (smdk5420) with odroid so set_board_info will * use proper prefix when creating full board_name (SYS_BOARD + type) */ -#undef CONFIG_SYS_BOARD -#define CONFIG_SYS_BOARD "odroid" /* Define new extra env settings, including DFU settings */ #undef CONFIG_EXTRA_ENV_SETTINGS diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index bc707eb..45297b9 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -17,7 +17,6 @@ /* * SoC Configuration */ -#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) diff --git a/include/configs/openrd.h b/include/configs/openrd.h index bd27e50..43d0896 100644 --- a/include/configs/openrd.h +++ b/include/configs/openrd.h @@ -13,12 +13,6 @@ #ifndef _CONFIG_OPENRD_H #define _CONFIG_OPENRD_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ -#define CONFIG_KW88F6281 1 /* SOC Name */ - #include "mv-common.h" /* diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 365f61b..2e1331b 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -102,12 +102,10 @@ #define CONFIG_SPL_NAND_INIT #define CONFIG_SPL_COMMON_INIT_DDR #define CONFIG_SPL_MAX_SIZE (128 << 10) -#define CONFIG_TPL_TEXT_BASE 0xf8f81000 #define CONFIG_SYS_MPC85XX_NO_RESETVEC #define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) -#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) #elif defined(CONFIG_SPL_BUILD) #define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE @@ -116,7 +114,6 @@ #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 #define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) #endif /* not CONFIG_TPL_BUILD */ #define CONFIG_SPL_PAD_TO 0x20000 @@ -130,7 +127,7 @@ #ifndef CONFIG_SYS_MONITOR_BASE #ifdef CONFIG_TPL_BUILD -#define CONFIG_SYS_MONITOR_BASE CONFIG_TPL_TEXT_BASE +#define CONFIG_SYS_MONITOR_BASE 0xf8f81000 #elif defined(CONFIG_SPL_BUILD) #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE #else @@ -140,17 +137,10 @@ #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ #define CONFIG_PCIE2 /* PCIE controller 2 (slot 2) */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ #define CONFIG_SYS_SATA_MAX_DEVICE 2 #define CONFIG_LBA48 -#if defined(CONFIG_TARGET_P2020RDB) -#define CONFIG_SYS_CLK_FREQ 100000000 -#else -#define CONFIG_SYS_CLK_FREQ 66666666 -#endif - #define CONFIG_HWCONFIG /* * These can be toggled for performance analysis, otherwise use default. @@ -534,7 +524,6 @@ #if defined(CONFIG_HAS_FSL_DR_USB) #ifdef CONFIG_USB_EHCI_HCD #define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_USB_EHCI_FSL #endif #endif @@ -546,8 +535,6 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR #endif -#undef CONFIG_WATCHDOG /* watchdog disabled */ - /* * Miscellaneous configurable options */ diff --git a/include/configs/p3450-0000.h b/include/configs/p3450-0000.h index 7f05beb..b03d3a4 100644 --- a/include/configs/p3450-0000.h +++ b/include/configs/p3450-0000.h @@ -24,12 +24,8 @@ func(DHCP, dhcp, na) /* Environment at end of QSPI, in the VER partition */ -#define CONFIG_ENV_SPI_MAX_HZ 48000000 -#define CONFIG_ENV_SPI_MODE SPI_MODE_0 #define CONFIG_SPI_FLASH_SIZE (4 << 20) -#define CONFIG_PREBOOT - #define BOARD_EXTRA_ENV_SETTINGS \ "preboot=if test -e mmc 1:1 /u-boot-preboot.scr; then " \ "load mmc 1:1 ${scriptaddr} /u-boot-preboot.scr; " \ diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h index a979736..7438d0a 100644 --- a/include/configs/phycore_imx8mm.h +++ b/include/configs/phycore_imx8mm.h @@ -14,8 +14,6 @@ #define CONFIG_SYS_BOOTM_LEN SZ_64M #define CONFIG_SPL_MAX_SIZE (148 * SZ_1K) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -39,7 +37,7 @@ "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ "ip_dyn=yes\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=2\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console} " \ @@ -97,6 +95,5 @@ /* USDHC */ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 #endif /* __PHYCORE_IMX8MM_H */ diff --git a/include/configs/phycore_imx8mp.h b/include/configs/phycore_imx8mp.h index 7ca3965..8c5ffee 100644 --- a/include/configs/phycore_imx8mp.h +++ b/include/configs/phycore_imx8mp.h @@ -14,8 +14,6 @@ #define CONFIG_SPL_MAX_SIZE (152 * SZ_1K) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -39,7 +37,7 @@ "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ "ip_dyn=yes\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=2\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console} " \ @@ -97,6 +95,5 @@ /* USDHC */ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 #endif /* __PHYCORE_IMX8MP_H */ diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h index cc2e6a7..3624c12 100644 --- a/include/configs/pic32mzdask.h +++ b/include/configs/pic32mzdask.h @@ -33,9 +33,6 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MONITOR_LEN (192 << 10) -#define CONFIG_SYS_ENV_ADDR 0x88300000 -#define CONFIG_SYS_FDT_ADDR 0x89d00000 - /* Memory Test */ /*---------------------------------------------------------------------- @@ -74,8 +71,8 @@ #define MEM_LAYOUT_ENV_SETTINGS \ "kernel_addr_r="__stringify(CONFIG_SYS_LOAD_ADDR)"\0" \ - "fdt_addr_r="__stringify(CONFIG_SYS_FDT_ADDR)"\0" \ - "scriptaddr="__stringify(CONFIG_SYS_ENV_ADDR)"\0" + "fdt_addr_r=0x89d00000\0" \ + "scriptaddr=0x88300000\0" \ #define CONFIG_LEGACY_BOOTCMD_ENV \ "legacy_bootcmd= " \ diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h index 3fe1783..6e1c382 100644 --- a/include/configs/pico-imx6ul.h +++ b/include/configs/pico-imx6ul.h @@ -64,8 +64,6 @@ "bootmenu_2=Boot using PICO-Pi baseboard=" \ "setenv fdtfile imx6ul-pico-pi.dtb\0" \ -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h index cbac950..6137f21 100644 --- a/include/configs/pico-imx7d.h +++ b/include/configs/pico-imx7d.h @@ -65,9 +65,6 @@ BOOTENV #endif - -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #define CONFIG_EXTRA_ENV_SETTINGS \ "image=zImage\0" \ "splashpos=m,m\0" \ diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h index f1b406f..2293a29 100644 --- a/include/configs/pico-imx8mq.h +++ b/include/configs/pico-imx8mq.h @@ -11,8 +11,6 @@ #define CONFIG_SPL_MAX_SIZE (124 * 1024) #define CONFIG_SYS_MONITOR_LEN (512 * 1024) -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ @@ -56,7 +54,7 @@ "initrd_addr=0x43800000\0" \ "initrd_high=0xffffffffffffffff\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \ @@ -97,10 +95,6 @@ #define PHYS_SDRAM 0x40000000 #define PHYS_SDRAM_SIZE 0x80000000 /* 2 GiB DDR */ -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ - (PHYS_SDRAM_SIZE >> 1)) - #define CONFIG_MXC_UART_BASE UART1_BASE_ADDR /* Monitor Command Prompt */ @@ -113,12 +107,6 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - -#define CONFIG_MXC_GPIO - -#define CONFIG_OF_SYSTEM_SETUP - #define CONFIG_SYS_BOOTM_LEN SZ_128M #endif diff --git a/include/configs/plutux.h b/include/configs/plutux.h index 7fc06e8..9a4a632 100644 --- a/include/configs/plutux.h +++ b/include/configs/plutux.h @@ -19,7 +19,6 @@ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE /* NAND support */ -#define CONFIG_TEGRA_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Environment in NAND, aligned to start of last sector */ diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index d4f7870..e9eb736 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -179,11 +179,6 @@ #endif -#define CONFIG_JFFS2_NAND 1 -#define CONFIG_JFFS2_DEV "nand0" /* NAND device jffs2 lives on */ -#define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */ -#define CONFIG_JFFS2_PART_SIZE (256 * 1024 * 1024) /* partition size*/ - /* PSRAM */ #define PHYS_PSRAM 0x70000000 #define PHYS_PSRAM_SIZE 0x00400000 /* 4MB */ diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index eab3825..b205391 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -45,7 +45,6 @@ #define CONFIG_SYS_NAND_MASK_CLE BIT(22) #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD3 -#define CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT #endif /* Ethernet */ diff --git a/include/configs/pogo_e02.h b/include/configs/pogo_e02.h index 196e362..3e94125 100644 --- a/include/configs/pogo_e02.h +++ b/include/configs/pogo_e02.h @@ -12,12 +12,6 @@ #ifndef _CONFIG_POGO_E02_H #define _CONFIG_POGO_E02_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ -#define CONFIG_KW88F6281 /* SOC Name */ - #include "mv-common.h" /* diff --git a/include/configs/porter.h b/include/configs/porter.h index 7ffcf5f..867dada 100644 --- a/include/configs/porter.h +++ b/include/configs/porter.h @@ -35,8 +35,6 @@ #define CONFIG_BITBANGMII_MULTI /* Board Clock */ -#define RMOBILE_XTAL_CLK 20000000u -#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" diff --git a/include/configs/presidio_asic.h b/include/configs/presidio_asic.h index 3df5143..928ccb1 100644 --- a/include/configs/presidio_asic.h +++ b/include/configs/presidio_asic.h @@ -10,8 +10,6 @@ #define CONFIG_REMAKE_ELF -#define CONFIG_SUPPORT_RAW_INITRD - #define CONFIG_SYS_INIT_SP_ADDR 0x00100000 #define CONFIG_SYS_BOOTM_LEN 0x00c00000 diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h index 169d79c..e257c0e 100644 --- a/include/configs/qemu-ppce500.h +++ b/include/configs/qemu-ppce500.h @@ -13,8 +13,6 @@ #define CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ - #define CONFIG_ENABLE_36BIT_PHYS /* Needed to fill the ccsrbar pointer */ @@ -47,8 +45,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void); #define CONFIG_CHIP_SELECTS_PER_CTRL 0 -#define CONFIG_SYS_CLK_FREQ 33000000 - #define CONFIG_SYS_BOOT_BLOCK 0x00000000 /* boot TLB */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h index 1dd83db..8e86830 100644 --- a/include/configs/r2dplus.h +++ b/include/configs/r2dplus.h @@ -1,7 +1,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_CPU_SH7751 1 #define __LITTLE_ENDIAN__ 1 /* SCIF */ @@ -29,7 +28,6 @@ /* * SuperH Clock setting */ -#define CONFIG_SYS_CLK_FREQ 60000000 #define CONFIG_SYS_PLL_SETTLING_TIME 100/* in us */ /* diff --git a/include/configs/rcar-gen2-common.h b/include/configs/rcar-gen2-common.h index 595482c..f1f5d07 100644 --- a/include/configs/rcar-gen2-common.h +++ b/include/configs/rcar-gen2-common.h @@ -42,6 +42,6 @@ #define CONFIG_TMU_TIMER #define CONFIG_SYS_TIMER_COUNTS_DOWN #define CONFIG_SYS_TIMER_COUNTER (TMU_BASE + 0xc) /* TCNT0 */ -#define CONFIG_SYS_TIMER_RATE (CONFIG_SYS_CLK_FREQ / 8) +#define CONFIG_SYS_TIMER_RATE (get_board_sys_clk() / 8) #endif /* __RCAR_GEN2_COMMON_H */ diff --git a/include/configs/rk3036_common.h b/include/configs/rk3036_common.h index b133d8e..00c453d 100644 --- a/include/configs/rk3036_common.h +++ b/include/configs/rk3036_common.h @@ -12,7 +12,6 @@ #define CONFIG_ROCKCHIP_STIMER_BASE 0x200440a0 #define COUNTER_FREQUENCY 24000000 -#define CONFIG_SYS_ARCH_TIMER #define CONFIG_SYS_HZ_CLOCK 24000000 #define CONFIG_SYS_INIT_SP_ADDR 0x60100000 diff --git a/include/configs/rk3128_common.h b/include/configs/rk3128_common.h index 8b7a0bb..97cacea 100644 --- a/include/configs/rk3128_common.h +++ b/include/configs/rk3128_common.h @@ -13,7 +13,6 @@ #define CONFIG_ROCKCHIP_STIMER_BASE 0x200440a0 #define COUNTER_FREQUENCY 24000000 -#define CONFIG_SYS_ARCH_TIMER #define CONFIG_SYS_HZ_CLOCK 24000000 #define CONFIG_IRAM_BASE 0x10080000 diff --git a/include/configs/rk3188_common.h b/include/configs/rk3188_common.h index e7c0964..7449e81 100644 --- a/include/configs/rk3188_common.h +++ b/include/configs/rk3188_common.h @@ -22,7 +22,6 @@ /* spl size 32kb sram - 2kb bootrom */ #define CONFIG_SPL_MAX_SIZE (0x8000 - 0x800) -#define CONFIG_ROCKCHIP_SERIAL 1 #define CONFIG_SPL_STACK 0x10087fff diff --git a/include/configs/rk322x_common.h b/include/configs/rk322x_common.h index a46b1ff..ef55ef0 100644 --- a/include/configs/rk322x_common.h +++ b/include/configs/rk322x_common.h @@ -13,7 +13,6 @@ #define CONFIG_ROCKCHIP_STIMER_BASE 0x110d0020 #define COUNTER_FREQUENCY 24000000 -#define CONFIG_SYS_ARCH_TIMER #define CONFIG_SYS_HZ_CLOCK 24000000 #define CONFIG_SYS_INIT_SP_ADDR 0x61100000 diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h index abbb273..490da7c 100644 --- a/include/configs/rk3288_common.h +++ b/include/configs/rk3288_common.h @@ -15,7 +15,6 @@ #define CONFIG_ROCKCHIP_STIMER_BASE 0xff810020 #define COUNTER_FREQUENCY 24000000 -#define CONFIG_SYS_ARCH_TIMER #define CONFIG_SYS_HZ_CLOCK 24000000 #ifdef CONFIG_SPL_ROCKCHIP_BACK_TO_BROM diff --git a/include/configs/rk3308_common.h b/include/configs/rk3308_common.h index 496f462..1664707 100644 --- a/include/configs/rk3308_common.h +++ b/include/configs/rk3308_common.h @@ -12,7 +12,6 @@ #define CONFIG_SPL_MAX_SIZE 0x20000 #define CONFIG_SPL_BSS_START_ADDR 0x00400000 #define CONFIG_SPL_BSS_MAX_SIZE 0x2000 -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 #define CONFIG_SYS_NS16550_MEM32 diff --git a/include/configs/s5p4418_nanopi2.h b/include/configs/s5p4418_nanopi2.h index 2e94613..207ad00 100644 --- a/include/configs/s5p4418_nanopi2.h +++ b/include/configs/s5p4418_nanopi2.h @@ -104,16 +104,6 @@ (void *)PHY_BASEADDR_UART3} /*----------------------------------------------------------------------- - * PLL - */ -#define CONFIG_SYS_PLLFIN 24000000UL - -/*----------------------------------------------------------------------- - * Timer - */ -#define CONFIG_TIMER_SYS_TICK_CH 0 - -/*----------------------------------------------------------------------- * BACKLIGHT */ #ifndef CONFIG_S5P4418_ONEWIRE diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 14840a4..e3b091a 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -18,9 +18,6 @@ #include <linux/sizes.h> #include <asm/arch/cpu.h> /* get chip and board defs */ -/* input clock of PLL: has 24MHz input clock at S5PC110 */ -#define CONFIG_SYS_CLK_FREQ_C110 24000000 - /* DRAM Base */ #define CONFIG_SYS_SDRAM_BASE 0x30000000 diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 680f6ce..29adab3 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -14,7 +14,6 @@ #define CONFIG_TIZEN /* TIZEN lib */ /* Keep L2 Cache Disabled */ -#define CONFIG_SYS_L2CACHE_OFF 1 /* Universal has 2 banks of DRAM */ #define CONFIG_SYS_SDRAM_BASE 0x40000000 @@ -104,11 +103,6 @@ #define CONFIG_USB_GADGET_DWC2_OTG_PHY -/* - * SPI Settings - */ -#define CONFIG_SOFT_SPI - #ifndef __ASSEMBLY__ void universal_spi_scl(int bit); void universal_spi_sda(int bit); diff --git a/include/configs/salvator-x.h b/include/configs/salvator-x.h index 1eafff1..c29b34e 100644 --- a/include/configs/salvator-x.h +++ b/include/configs/salvator-x.h @@ -23,7 +23,6 @@ #define CONFIG_FLASH_SHOW_PROGRESS 45 #define CONFIG_SYS_FLASH_QUIET_TEST #define CONFIG_SYS_FLASH_BANKS_LIST { 0x08000000 } -#define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 #define CONFIG_SYS_MAX_FLASH_SECT 256 diff --git a/include/configs/sama5d2_icp.h b/include/configs/sama5d2_icp.h index a62a5fa..c3a5c2a 100644 --- a/include/configs/sama5d2_icp.h +++ b/include/configs/sama5d2_icp.h @@ -25,11 +25,6 @@ (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) #endif -/* NAND flash */ - -/* SPI flash */ -#define CONFIG_SF_DEFAULT_SPEED 66000000 - #ifdef CONFIG_SD_BOOT /* u-boot env in sd/mmc card */ #define FAT_ENV_INTERFACE "mmc" diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h index 34fd272..11c13c6 100644 --- a/include/configs/sama5d2_xplained.h +++ b/include/configs/sama5d2_xplained.h @@ -30,12 +30,6 @@ #endif -#ifdef CONFIG_QSPI_BOOT -#undef CONFIG_ENV_SPI_BUS -#define CONFIG_ENV_SPI_BUS 1 - -#endif - /* SPL */ #define CONFIG_SPL_MAX_SIZE 0x10000 #define CONFIG_SPL_BSS_START_ADDR 0x20000000 diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index c51517a..e6c200f 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -27,7 +27,6 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ /* NAND support */ -#define CONFIG_TEGRA_NAND /* Max number of NAND devices */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index bb7ce8d..8dba4fc 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -9,12 +9,7 @@ #ifndef _CONFIG_SHEEVAPLUG_H #define _CONFIG_SHEEVAPLUG_H -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ - -#include "mv-plug-common.h" +#include "mv-common.h" /* * Environment variables configurations diff --git a/include/configs/siemens-ccp-common.h b/include/configs/siemens-ccp-common.h deleted file mode 100644 index 01051c8..0000000 --- a/include/configs/siemens-ccp-common.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* Be very careful updating CONFIG_IDENT_STRING - * This string will control the update flow whether an U-Boot should be - * updated or not. If the version of installed U-Boot (in flash) is smaller - * than the version to be installed (from update file), an update will - * be performed. - * - * General rules: - * 1. First 4 characters ' ##v' or IDENT_MAGIC represent kind of a magic number - * to identify the following strings after easily. Don't change them! - * - * 2. First 2 digits after 'v' or CCP_MAJOR are updated with U-Boot version - * change, e.g. from 2015.04 to 2018.03 - * - * 3. Second 2 digits after '.' or CCP_MINOR are updated if we want to upgrade - * U-Boot within an U-Boot version. - */ -#define CCP_IDENT_MAGIC " ##v" -#define GENERATE_CCP_VERSION(MAJOR, MINOR) CCP_IDENT_MAGIC MAJOR "." MINOR diff --git a/include/configs/sifive-unleashed.h b/include/configs/sifive-unleashed.h index 8535678..920f314 100644 --- a/include/configs/sifive-unleashed.h +++ b/include/configs/sifive-unleashed.h @@ -74,10 +74,6 @@ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ BOOTENV \ BOOTENV_SF - -#define CONFIG_PREBOOT \ - "setenv fdt_addr ${fdtcontroladdr};" \ - "fdt addr ${fdtcontroladdr};" #endif #endif /* __CONFIG_H */ diff --git a/include/configs/sifive-unmatched.h b/include/configs/sifive-unmatched.h index f68d7d7..30adfe9 100644 --- a/include/configs/sifive-unmatched.h +++ b/include/configs/sifive-unmatched.h @@ -32,8 +32,6 @@ #define CONFIG_STANDALONE_LOAD_ADDR 0x80200000 -#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit resources */ - #define CONFIG_SYS_SCSI_MAX_SCSI_ID 4 /* Environment options */ @@ -72,10 +70,6 @@ "partitions=" PARTS_DEFAULT "\0" \ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ BOOTENV - -#define CONFIG_PREBOOT \ - "setenv fdt_addr ${fdtcontroladdr};" \ - "fdt addr ${fdtcontroladdr};" #endif /* CONFIG_SPL_BUILD */ #define CONFIG_SYS_EEPROM_BUS_NUM 0 diff --git a/include/configs/silk.h b/include/configs/silk.h index eee60fd..29350a6 100644 --- a/include/configs/silk.h +++ b/include/configs/silk.h @@ -35,8 +35,6 @@ #define CONFIG_BITBANGMII_MULTI /* Board Clock */ -#define RMOBILE_XTAL_CLK 20000000u -#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index 8fdb692..28ff48b 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -22,7 +22,6 @@ #include <asm/arch/cpu.h> /* get chip and board defs */ /* input clock of PLL: SMDKC100 has 12MHz input clock */ -#define CONFIG_SYS_CLK_FREQ 12000000 /* DRAM Base */ #define CONFIG_SYS_SDRAM_BASE 0x30000000 diff --git a/include/configs/smegw01.h b/include/configs/smegw01.h index 47d4f68..a7f7756 100644 --- a/include/configs/smegw01.h +++ b/include/configs/smegw01.h @@ -16,7 +16,6 @@ /* MMC Config*/ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 #define CONFIG_EXTRA_ENV_SETTINGS \ "image=zImage\0" \ diff --git a/include/configs/snapper9g45.h b/include/configs/snapper9g45.h index de918e7..3889a88 100644 --- a/include/configs/snapper9g45.h +++ b/include/configs/snapper9g45.h @@ -45,9 +45,6 @@ #define CONFIG_AT91_WANTS_COMMON_PHY #define CONFIG_TFTP_PORT -/* MMC */ -#define CONFIG_GENERIC_ATMEL_MCI - /* LCD */ #define CONFIG_ATMEL_LCD #define CONFIG_GURNARD_SPLASH diff --git a/include/configs/socfpga_arria5_secu1.h b/include/configs/socfpga_arria5_secu1.h index 9ce5fa6..0935eae 100644 --- a/include/configs/socfpga_arria5_secu1.h +++ b/include/configs/socfpga_arria5_secu1.h @@ -95,7 +95,4 @@ /* The rest of the configuration is shared */ #include <configs/socfpga_common.h> -#undef CONFIG_WATCHDOG_TIMEOUT_MSECS -#define CONFIG_WATCHDOG_TIMEOUT_MSECS 60000 - #endif /* __CONFIG_SOCFPGA_SECU1_H__ */ diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 31f95f5..155aece 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -187,10 +187,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4) #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" #endif -#else -#ifndef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 1 -#endif #endif /* SPL QSPI boot support */ diff --git a/include/configs/socfpga_soc64_common.h b/include/configs/socfpga_soc64_common.h index 4d7072c..928582a 100644 --- a/include/configs/socfpga_soc64_common.h +++ b/include/configs/socfpga_soc64_common.h @@ -60,7 +60,6 @@ /* Flash device info */ #ifndef CONFIG_SPL_BUILD -#define CONFIG_MTD_PARTITIONS #define MTDIDS_DEFAULT "nor0=ff705000.spi.0" #endif /* CONFIG_SPL_BUILD */ @@ -148,7 +147,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void); * L4 Watchdog */ #ifndef CONFIG_SPL_BUILD -#undef CONFIG_HW_WATCHDOG #undef CONFIG_DESIGNWARE_WATCHDOG #endif #define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS diff --git a/include/configs/socrates.h b/include/configs/socrates.h index b7296da..15e93d0 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -38,10 +38,6 @@ * in the README.mpc85xxads. */ -#ifndef CONFIG_SYS_CLK_FREQ -#define CONFIG_SYS_CLK_FREQ 66666666 -#endif - /* * These can be toggled for performance analysis, otherwise use default. */ @@ -181,8 +177,6 @@ */ #define CONFIG_BOOTP_BOOTFILESIZE -#undef CONFIG_WATCHDOG /* watchdog disabled */ - /* * Miscellaneous configurable options */ diff --git a/include/configs/stmark2.h b/include/configs/stmark2.h index 1a5cf6b..18a57f2 100644 --- a/include/configs/stmark2.h +++ b/include/configs/stmark2.h @@ -41,9 +41,6 @@ #define CONFIG_RTC_MCFRRTC #define CONFIG_SYS_MCFRRTC_BASE 0xFC0A8000 -/* spi not partitions */ -#define CONFIG_JFFS2_DEV "nor0" - /* Timer */ #define CONFIG_MCFTMR diff --git a/include/configs/stout.h b/include/configs/stout.h index a1e7e86..df2d967 100644 --- a/include/configs/stout.h +++ b/include/configs/stout.h @@ -39,8 +39,6 @@ #define CONFIG_BITBANGMII_MULTI /* Board Clock */ -#define RMOBILE_XTAL_CLK 20000000u -#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x10000000\0" diff --git a/include/configs/synquacer.h b/include/configs/synquacer.h index 3d099b4..0409589 100644 --- a/include/configs/synquacer.h +++ b/include/configs/synquacer.h @@ -41,15 +41,11 @@ #define CONFIG_SYS_FLASH_BASE (0x08000000) #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} -#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + (512 * 1024)) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + PHYS_SDRAM_SIZE) - #define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SYS_MAXARGS 128 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Since U-Boot 64bit PCIe support is limited, disable 64bit MMIO support */ -/* #define CONFIG_SYS_PCI_64BIT 1 */ #define DEFAULT_DFU_ALT_INFO "dfu_alt_info=" \ "mtd nor1=u-boot.bin raw 200000 100000;" \ diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h deleted file mode 100644 index a47e2c5..0000000 --- a/include/configs/tam3517-common.h +++ /dev/null @@ -1,281 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2011 - * Stefano Babic, DENX Software Engineering, sbabic@denx.de. - * - * Copyright (C) 2009 TechNexion Ltd. - */ - -#ifndef __TAM3517_H -#define __TAM3517_H - -/* - * High Level Configuration Options - */ - -#include <asm/arch/cpu.h> /* get chip and board defs */ -#include <asm/arch/omap.h> - -/* Clock Defines */ -#define V_OSCK 26000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) - -/* - * DDR related - */ -#define CONFIG_SYS_CS0_SIZE (256 * 1024 * 1024) - -/* - * Hardware drivers - */ - -/* - * NS16550 Configuration - */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ - -/* - * select serial console configuration - */ -#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 - -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ - 115200} - -#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 - -/* - * Board NAND Info. - */ -#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ - /* to access */ - /* nand at CS0 */ - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ - /* NAND devices */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ - -#define CONFIG_SYS_MAXARGS 32 /* max number of command */ - /* args */ - -/* - * AM3517 has 12 GP timers, they can be driven by the system clock - * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). - * This rate is divided by a local divisor. - */ -#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ - -/* - * Physical Memory Map - */ -#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 - -/* - * FLASH and environment organization - */ - -/* **** PISMO SUPPORT *** */ - -/* Redundant Environment */ -#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -/* - * ethernet support, EMAC - * - */ -#define CONFIG_NET_RETRY_COUNT 10 - -/* Defines for SPL */ -#define CONFIG_SPL_CONSOLE -#define CONFIG_SPL_NAND_SOFTECC -#define CONFIG_SPL_NAND_WORKSPACE 0x8f07f000 /* below BSS */ - -#define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ - CONFIG_SPL_TEXT_BASE) -#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK - -#define CONFIG_SYS_SPL_MALLOC_START 0x8f000000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 -#define CONFIG_SPL_BSS_START_ADDR 0x8f080000 /* end of RAM */ -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 - -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" - -/* FAT */ -#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" -#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" - -/* RAW SD card / eMMC */ -#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900 /* address 0x120000 */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */ - -/* NAND boot config */ -#define CONFIG_SYS_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47,\ - 48, 49, 50, 51, 52, 53, 54, 55,\ - 56, 57, 58, 59, 60, 61, 62, 63} -#define CONFIG_SYS_NAND_ECCSIZE 256 -#define CONFIG_SYS_NAND_ECCBYTES 3 - -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE - -#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 - -/* Setup MTD for NAND on the SOM */ - -#define CONFIG_TAM3517_SETTINGS \ - "netdev=eth0\0" \ - "nandargs=setenv bootargs root=${nandroot} " \ - "rootfstype=${nandrootfstype}\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip_sta=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ - "addip=if test -n ${ipdyn};then run addip_dyn;" \ - "else run addip_sta;fi\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "addtty=setenv bootargs ${bootargs}" \ - " console=ttyO0,${baudrate}\0" \ - "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ - "loadaddr=82000000\0" \ - "kernel_addr_r=82000000\0" \ - "hostname=" CONFIG_HOSTNAME "\0" \ - "bootfile=" CONFIG_HOSTNAME "/uImage\0" \ - "flash_self=run ramargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr}\0" \ - "nandboot=run nandargs addip addtty addmtd addmisc;" \ - "nand read ${kernel_addr_r} kernel\0" \ - "bootm ${kernel_addr_r}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ - "run nfsargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr_r}\0" \ - "net_self=if run net_self_load;then " \ - "run ramargs addip addtty addmtd addmisc;" \ - "bootm ${kernel_addr_r} ${ramdisk_addr_r};" \ - "else echo Images not loades;fi\0" \ - "u-boot=" CONFIG_HOSTNAME "/u-boot.img\0" \ - "load=tftp ${loadaddr} ${u-boot}\0" \ - "loadmlo=tftp ${loadaddr} ${mlo}\0" \ - "mlo=" CONFIG_HOSTNAME "/MLO\0" \ - "uboot_addr=0x80000\0" \ - "update=nandecc sw;nand erase ${uboot_addr} 100000;" \ - "nand write ${loadaddr} ${uboot_addr} 80000\0" \ - "updatemlo=nandecc hw;nand erase 0 20000;" \ - "nand write ${loadaddr} 0 20000\0" \ - "upd=if run load;then echo Updating u-boot;if run update;" \ - "then echo U-Boot updated;" \ - "else echo Error updating u-boot !;" \ - "echo Board without bootloader !!;" \ - "fi;" \ - "else echo U-Boot not downloaded..exiting;fi\0" \ - -/* - * this is common code for all TAM3517 boards. - * MAC address is stored from manufacturer in - * I2C EEPROM - */ -#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) -/* - * The I2C EEPROM on the TAM3517 contains - * mac address and production data - */ -struct tam3517_module_info { - char customer[48]; - char product[48]; - - /* - * bit 0~47 : sequence number - * bit 48~55 : week of year, from 0. - * bit 56~63 : year - */ - unsigned long long sequence_number; - - /* - * bit 0~7 : revision fixed - * bit 8~15 : revision major - * bit 16~31 : TNxxx - */ - unsigned int revision; - unsigned char eth_addr[4][8]; - unsigned char _rev[100]; -}; - -#define TAM3517_READ_EEPROM(info, ret) \ -do { \ - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); \ - if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, \ - (void *)info, sizeof(*info))) \ - ret = 1; \ - else \ - ret = 0; \ -} while (0) - -#define TAM3517_READ_MAC_FROM_EEPROM(info) \ -do { \ - char buf[80], ethname[20]; \ - int i; \ - memset(buf, 0, sizeof(buf)); \ - for (i = 0 ; i < ARRAY_SIZE((info)->eth_addr); i++) { \ - sprintf(buf, "%02X:%02X:%02X:%02X:%02X:%02X", \ - (info)->eth_addr[i][5], \ - (info)->eth_addr[i][4], \ - (info)->eth_addr[i][3], \ - (info)->eth_addr[i][2], \ - (info)->eth_addr[i][1], \ - (info)->eth_addr[i][0]); \ - \ - if (i) \ - sprintf(ethname, "eth%daddr", i); \ - else \ - strcpy(ethname, "ethaddr"); \ - printf("Setting %s from EEPROM with %s\n", ethname, buf);\ - env_set(ethname, buf); \ - } \ -} while (0) - -/* The following macros are taken from Technexion's documentation */ -#define TAM3517_sequence_number(info) \ - ((info)->sequence_number % 0x1000000000000LL) -#define TAM3517_week_of_year(info) (((info)->sequence_number >> 48) % 0x100) -#define TAM3517_year(info) ((info)->sequence_number >> 56) -#define TAM3517_revision_fixed(info) ((info)->revision % 0x100) -#define TAM3517_revision_major(info) (((info)->revision >> 8) % 0x100) -#define TAM3517_revision_tn(info) ((info)->revision >> 16) - -#define TAM3517_PRINT_SOM_INFO(info) \ -do { \ - printf("Vendor:%s\n", (info)->customer); \ - printf("SOM: %s\n", (info)->product); \ - printf("SeqNr: %02llu%02llu%012llu\n", \ - TAM3517_year(info), \ - TAM3517_week_of_year(info), \ - TAM3517_sequence_number(info)); \ - printf("Rev: TN%u %u.%u\n", \ - TAM3517_revision_tn(info), \ - TAM3517_revision_major(info), \ - TAM3517_revision_fixed(info)); \ -} while (0) - -#endif - -#endif /* __TAM3517_H */ diff --git a/include/configs/tec.h b/include/configs/tec.h index aa9665e..432ccbd 100644 --- a/include/configs/tec.h +++ b/include/configs/tec.h @@ -19,7 +19,6 @@ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE /* NAND support */ -#define CONFIG_TEGRA_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Environment in NAND, aligned to start of last sector */ diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 673056c..99b7bd0 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -12,7 +12,6 @@ /* * High Level Configuration Options */ -#define CONFIG_SYS_L2CACHE_OFF /* No L2 cache */ #include <asm/arch/tegra.h> /* get chip and board defs */ diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h index 063213c..fac8692 100644 --- a/include/configs/tegra20-common.h +++ b/include/configs/tegra20-common.h @@ -79,6 +79,4 @@ */ #define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10 -#define CONFIG_SYS_NAND_SELF_INIT - #endif /* _TEGRA20_COMMON_H_ */ diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index 44dca25..533673b 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -27,7 +27,6 @@ /** * Platform/Board specific defs */ -#define CONFIG_SYS_CLK_FREQ 27000000 #define CONFIG_SYS_TIMERBASE 0x4802E000 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ diff --git a/include/configs/trats.h b/include/configs/trats.h index d34b9e8..5217400 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -15,7 +15,6 @@ #define CONFIG_TIZEN /* TIZEN lib */ -#define CONFIG_SYS_L2CACHE_OFF #ifndef CONFIG_SYS_L2CACHE_OFF #define CONFIG_SYS_L2_PL310 #define CONFIG_SYS_PL310_BASE 0x10502000 diff --git a/include/configs/trats2.h b/include/configs/trats2.h index 32e7b91..8d4b782 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -14,7 +14,6 @@ #define CONFIG_TIZEN /* TIZEN lib */ -#define CONFIG_SYS_L2CACHE_OFF #ifndef CONFIG_SYS_L2CACHE_OFF #define CONFIG_SYS_L2_PL310 #define CONFIG_SYS_PL310_BASE 0x10502000 diff --git a/include/configs/ulcb.h b/include/configs/ulcb.h index 1ce844f..bdd6b4b 100644 --- a/include/configs/ulcb.h +++ b/include/configs/ulcb.h @@ -23,7 +23,6 @@ #define CONFIG_FLASH_SHOW_PROGRESS 45 #define CONFIG_SYS_FLASH_QUIET_TEST #define CONFIG_SYS_FLASH_BANKS_LIST { 0x08000000 } -#define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 #define CONFIG_SYS_MAX_FLASH_SECT 256 diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index b91b0db..fb7b83d 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -198,6 +198,4 @@ #define CONFIG_SPL_PAD_TO 0x20000 -#define CONFIG_SYS_PCI_64BIT - #endif /* __CONFIG_UNIPHIER_H__ */ diff --git a/include/configs/usbarmory.h b/include/configs/usbarmory.h index 77da2bf..0faa656 100644 --- a/include/configs/usbarmory.h +++ b/include/configs/usbarmory.h @@ -10,8 +10,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_SYS_FSL_CLK - #include <asm/arch/imx-regs.h> /* U-Boot environment */ diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h index 7fbec27..17583c0 100644 --- a/include/configs/verdin-imx8mm.h +++ b/include/configs/verdin-imx8mm.h @@ -11,8 +11,6 @@ #define CONFIG_SPL_MAX_SIZE (148 * 1024) #define CONFIG_SYS_MONITOR_LEN SZ_512K -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 #define CONFIG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) @@ -103,7 +101,6 @@ /* USDHC */ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 /* ENET */ #define CONFIG_ETHPRIME "FEC" diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h index 990f5ed..91d50bc 100644 --- a/include/configs/vexpress_common.h +++ b/include/configs/vexpress_common.h @@ -109,8 +109,6 @@ /* Board info register */ #define SYS_ID V2M_SYSREGS -#define CONFIG_SYS_L2CACHE_OFF 1 - #define SCTL_BASE V2M_SYSCTL #define VEXPRESS_FLASHPROG_FLVPPEN (1 << 0) diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index c42db36..d90c2fa 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -11,8 +11,6 @@ #include <asm/arch/imx-regs.h> #include <linux/stringify.h> -#define CONFIG_SYS_FSL_CLK - /* NAND support */ #ifdef CONFIG_CMD_NAND diff --git a/include/configs/vinco.h b/include/configs/vinco.h index 4967931..7bd4882 100644 --- a/include/configs/vinco.h +++ b/include/configs/vinco.h @@ -34,13 +34,11 @@ #ifdef CONFIG_CMD_SF #define CONFIG_ATMEL_SPI0 -#define CONFIG_SPI_FLASH_STMICRO #endif /* MMC */ #ifdef CONFIG_CMD_MMC -#define CONFIG_GENERIC_ATMEL_MCI #define ATMEL_BASE_MMCI 0xfc000000 #define CONFIG_SYS_MMC_CLK_OD 500000 diff --git a/include/configs/vocore2.h b/include/configs/vocore2.h index 58888d4..c60da8a 100644 --- a/include/configs/vocore2.h +++ b/include/configs/vocore2.h @@ -30,7 +30,6 @@ #define CONFIG_SYS_NS16550_CLK 40000000 #define CONFIG_SYS_NS16550_REG_SIZE -4 #define CONFIG_SYS_NS16550_COM3 0xb0000e00 -#define CONFIG_CONS_INDEX 3 /* RAM */ diff --git a/include/configs/warp7.h b/include/configs/warp7.h index 33eef90..83ee178 100644 --- a/include/configs/warp7.h +++ b/include/configs/warp7.h @@ -16,7 +16,6 @@ /* MMC Config*/ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR #define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 #define CONFIG_DFU_ENV_SETTINGS \ "dfu_alt_info=boot raw 0x2 0x1000 mmcpart 1\0" \ @@ -40,12 +39,12 @@ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ "fdt_file=imx7s-warp.dtb\0" \ - "fdt_addr=" __stringify(CONFIG_SYS_FDT_ADDR)"\0" \ + "fdt_addr=0x83000000\0" \ "fdtovaddr=0x83100000\0" \ "boot_fdt=try\0" \ "ip_dyn=yes\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "rootpart=" __stringify(CONFIG_WARP7_ROOT_PART) "\0" \ "finduuid=part uuid mmc 0:${rootpart} uuid\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h index a45d3b4..a43fd81 100644 --- a/include/configs/work_92105.h +++ b/include/configs/work_92105.h @@ -55,7 +55,6 @@ */ /* driver configuration */ -#define CONFIG_SYS_NAND_SELF_INIT #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_MAX_NAND_CHIPS 1 #define CONFIG_SYS_NAND_BASE MLC_NAND_BASE @@ -64,8 +63,6 @@ * GPIO */ -#define CONFIG_LPC32XX_GPIO - /* * Environment */ diff --git a/include/configs/xea.h b/include/configs/xea.h index 5b968f0..aa48bb9 100644 --- a/include/configs/xea.h +++ b/include/configs/xea.h @@ -29,10 +29,6 @@ #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (SZ_32K / 0x200) #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR (SZ_1M / 0x200) -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SPI_FLASH_MTD -#endif - /* Memory configuration */ #define PHYS_SDRAM_1 0x40000000 /* Base address */ #define PHYS_SDRAM_1_SIZE 0x10000000 /* Max 256 MB RAM */ diff --git a/include/configs/xenguest_arm64.h b/include/configs/xenguest_arm64.h index c5e3d16..408c7b5 100644 --- a/include/configs/xenguest_arm64.h +++ b/include/configs/xenguest_arm64.h @@ -11,17 +11,8 @@ #define CONFIG_EXTRA_ENV_SETTINGS -#undef CONFIG_NR_DRAM_BANKS #undef CONFIG_SYS_SDRAM_BASE -#define CONFIG_NR_DRAM_BANKS 1 - -/* - * This can be any arbitrary address as we are using PIE, but - * please note, that CONFIG_SYS_TEXT_BASE must match the below. - */ -#define CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE CONFIG_SYS_LOAD_ADDR - /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SYS_MAXARGS 64 @@ -29,8 +20,6 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_OF_SYSTEM_SETUP - #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ "loadimage=ext4load pvblock 0 0x90000000 /boot/Image;\0" \ diff --git a/include/configs/xilinx_versal.h b/include/configs/xilinx_versal.h index 4348645..03539a4 100644 --- a/include/configs/xilinx_versal.h +++ b/include/configs/xilinx_versal.h @@ -26,8 +26,6 @@ #endif /* Serial setup */ -#define CONFIG_CPU_ARMV8 - #define CONFIG_SYS_BAUDRATE_TABLE \ { 4800, 9600, 19200, 38400, 57600, 115200 } diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index e214805..f4b7f30 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -26,8 +26,6 @@ #endif /* Serial setup */ -#define CONFIG_CPU_ARMV8 - #define CONFIG_SYS_BAUDRATE_TABLE \ { 4800, 9600, 19200, 38400, 57600, 115200 } @@ -39,10 +37,6 @@ # define CONFIG_SYS_MAX_NAND_DEVICE 1 #endif -#if defined(CONFIG_SPL_BUILD) -#define CONFIG_ZYNQMP_PSU_INIT_ENABLED -#endif - /* Miscellaneous configurable options */ #if defined(CONFIG_ZYNQMP_USB) diff --git a/include/configs/xilinx_zynqmp_r5.h b/include/configs/xilinx_zynqmp_r5.h index 6d5b81e..3ec99e0 100644 --- a/include/configs/xilinx_zynqmp_r5.h +++ b/include/configs/xilinx_zynqmp_r5.h @@ -8,9 +8,6 @@ #define CONFIG_EXTRA_ENV_SETTINGS -/* CPU clock */ -#define CONFIG_CPU_FREQ_HZ 500000000 - /* Serial drivers */ /* The following table includes the supported baudrates */ #define CONFIG_SYS_BAUDRATE_TABLE \ diff --git a/include/configs/xpress.h b/include/configs/xpress.h index f6645a7..6d621f2 100644 --- a/include/configs/xpress.h +++ b/include/configs/xpress.h @@ -48,8 +48,6 @@ #define CONFIG_FEC_XCV_TYPE RMII #define CONFIG_ETHPRIME "FEC" -#define CONFIG_SYS_MMC_IMG_LOAD_PART 1 - #define CONFIG_UBOOT_SECTOR_START 0x2 #define CONFIG_UBOOT_SECTOR_COUNT 0x3fe @@ -64,7 +62,7 @@ "boot_fdt=try\0" \ "ip_dyn=yes\0" \ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ + "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcautodetect=yes\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ diff --git a/include/configs/xtfpga.h b/include/configs/xtfpga.h index ccc90a6..c8a6e9a 100644 --- a/include/configs/xtfpga.h +++ b/include/configs/xtfpga.h @@ -22,9 +22,6 @@ #define CONFIG_XTFPGA -/* FPGA CPU freq after init */ -#define CONFIG_SYS_CLK_FREQ (gd->cpu_clk) - /*===================*/ /* RAM Layout */ /*===================*/ @@ -169,7 +166,7 @@ #define CONFIG_SYS_NS16550_COM1 IOADDR(0x0D050020) /* Base address */ /* Input clk to NS16550 (in Hz; the SYS_CLK_FREQ is in kHz) */ -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_CLK_FREQ +#define CONFIG_SYS_NS16550_CLK get_board_sys_clk() /*======================*/ /* Ethernet Driver Info */ diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 4de2f94..88c6490 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -9,15 +9,9 @@ #ifndef __CONFIG_ZYNQ_COMMON_H #define __CONFIG_ZYNQ_COMMON_H -/* CPU clock */ -#ifndef CONFIG_CPU_FREQ_HZ -# define CONFIG_CPU_FREQ_HZ 800000000 -#endif - #define CONFIG_REMAKE_ELF /* Cache options */ -#define CONFIG_SYS_L2CACHE_OFF #ifndef CONFIG_SYS_L2CACHE_OFF # define CONFIG_SYS_L2_PL310 # define CONFIG_SYS_PL310_BASE 0xf8f02000 |