diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/T208xQDS.h | 4 | ||||
| -rw-r--r-- | include/configs/sunxi-common.h | 30 | ||||
| -rw-r--r-- | include/configs/uniphier.h | 12 |
3 files changed, 39 insertions, 7 deletions
diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index d8c57a8..f48697c 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -291,6 +291,10 @@ unsigned long get_board_ddr_clk(void); #define QIXIS_LBMAP_SHIFT 0 #define QIXIS_LBMAP_DFLTBANK 0x00 #define QIXIS_LBMAP_ALTBANK 0x04 +#define QIXIS_LBMAP_NAND 0x09 +#define QIXIS_LBMAP_SD 0x00 +#define QIXIS_RCW_SRC_NAND 0x104 +#define QIXIS_RCW_SRC_SD 0x040 #define QIXIS_RST_CTL_RESET 0x83 #define QIXIS_RST_FORCE_MEM 0x1 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index ac2d931..b33cfb8 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -189,14 +189,14 @@ #define CONFIG_SPL_BOARD_LOAD_IMAGE #if defined(CONFIG_MACH_SUN9I) -#define CONFIG_SPL_TEXT_BASE 0x10020 /* sram start+header */ -#define CONFIG_SPL_MAX_SIZE 0x5fe0 /* ? KiB on sun9i */ +#define CONFIG_SPL_TEXT_BASE 0x10040 /* sram start+header */ +#define CONFIG_SPL_MAX_SIZE 0x5fc0 /* ? KiB on sun9i */ #elif defined(CONFIG_MACH_SUN50I) -#define CONFIG_SPL_TEXT_BASE 0x10020 /* sram start+header */ -#define CONFIG_SPL_MAX_SIZE 0x7fe0 /* 32 KiB on sun50i */ +#define CONFIG_SPL_TEXT_BASE 0x10040 /* sram start+header */ +#define CONFIG_SPL_MAX_SIZE 0x7fc0 /* 32 KiB on sun50i */ #else -#define CONFIG_SPL_TEXT_BASE 0x20 /* sram start+header */ -#define CONFIG_SPL_MAX_SIZE 0x5fe0 /* 24KB on sun4i/sun7i */ +#define CONFIG_SPL_TEXT_BASE 0x40 /* sram start+header */ +#define CONFIG_SPL_MAX_SIZE 0x5fc0 /* 24KB on sun4i/sun7i */ #endif #define CONFIG_SPL_LIBDISK_SUPPORT @@ -390,6 +390,23 @@ extern int soft_i2c_gpio_scl; #define CONFIG_PRE_CONSOLE_BUFFER #define CONFIG_PRE_CON_BUF_SZ 4096 /* Aprox 2 80*25 screens */ +#ifdef CONFIG_ARM64 +/* + * Boards seem to come with at least 512MB of DRAM. + * The kernel should go at 512K, which is the default text offset (that will + * be adjusted at runtime if needed). + * There is no compression for arm64 kernels (yet), so leave some space + * for really big kernels, say 256MB for now. + * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd. + * Align the initrd to a 2MB page. + */ +#define KERNEL_ADDR_R __stringify(SDRAM_OFFSET(0080000)) +#define FDT_ADDR_R __stringify(SDRAM_OFFSET(FA00000)) +#define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(FC00000)) +#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(FD00000)) +#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(FE00000)) + +#else /* * 160M RAM (256M minimum minus 64MB heap + 32MB for u-boot, stack, fb, etc. * 32M uncompressed kernel, 16M compressed kernel, 1M fdt, @@ -401,6 +418,7 @@ extern int soft_i2c_gpio_scl; #define SCRIPT_ADDR_R __stringify(SDRAM_OFFSET(3100000)) #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000)) #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000)) +#endif #define MEM_LAYOUT_ENV_SETTINGS \ "bootm_size=0xa000000\0" \ diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index 18cb963..10fd8c2 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -104,7 +104,11 @@ #define COUNTER_FREQUENCY 50000000 #define CONFIG_GICV3 #define GICD_BASE 0x5fe00000 +#if defined(CONFIG_ARCH_UNIPHIER_LD11) +#define GICR_BASE 0x5fe40000 +#elif defined(CONFIG_ARCH_UNIPHIER_LD20) #define GICR_BASE 0x5fe80000 +#endif #else /* Time clock 1MHz */ #define CONFIG_SYS_TIMER_RATE 1000000 @@ -270,7 +274,9 @@ #define CONFIG_SPL_TEXT_BASE 0x00100000 #endif -#if defined(CONFIG_ARCH_UNIPHIER_LD20) +#if defined(CONFIG_ARCH_UNIPHIER_LD11) +#define CONFIG_SPL_STACK (0x30014c00) +#elif defined(CONFIG_ARCH_UNIPHIER_LD20) #define CONFIG_SPL_STACK (0x3001c000) #else #define CONFIG_SPL_STACK (0x00100000) @@ -301,7 +307,11 @@ #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #define CONFIG_SPL_MAX_FOOTPRINT 0x10000 #define CONFIG_SPL_MAX_SIZE 0x10000 +#if defined(CONFIG_ARCH_UNIPHIER_LD11) +#define CONFIG_SPL_BSS_START_ADDR 0x30012000 +#elif defined(CONFIG_ARCH_UNIPHIER_LD20) #define CONFIG_SPL_BSS_START_ADDR 0x30016000 +#endif #define CONFIG_SPL_BSS_MAX_SIZE 0x2000 #endif /* __CONFIG_UNIPHIER_COMMON_H__ */ |