diff options
Diffstat (limited to 'include/configs/m28evk.h')
| -rw-r--r-- | include/configs/m28evk.h | 225 |
1 files changed, 0 insertions, 225 deletions
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h deleted file mode 100644 index bb1d6b4..0000000 --- a/include/configs/m28evk.h +++ /dev/null @@ -1,225 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> - * on behalf of DENX Software Engineering GmbH - */ -#ifndef __CONFIGS_M28EVK_H__ -#define __CONFIGS_M28EVK_H__ - -/* System configurations */ -#define CONFIG_MACH_TYPE MACH_TYPE_M28EVK - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -/* Memory configuration */ -#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x40000000 /* Base address */ -#define PHYS_SDRAM_1_SIZE 0x20000000 /* Max 512 MB RAM */ -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 - -/* Environment */ -#define CONFIG_ENV_SIZE (16 * 1024) - -/* Environment is in NAND */ -#if defined(CONFIG_CMD_NAND) && defined(CONFIG_ENV_IS_IN_NAND) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE -#define CONFIG_ENV_SECT_SIZE (128 * 1024) -#define CONFIG_ENV_RANGE (4 * CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_OFFSET (24 * CONFIG_ENV_SECT_SIZE) /* 3 MiB */ -#define CONFIG_ENV_OFFSET_REDUND \ - (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE) - -#define CONFIG_MTD_DEVICE -#define CONFIG_MTD_PARTITIONS -#endif - -/* FEC Ethernet on SoC */ -#ifdef CONFIG_CMD_NET -#define CONFIG_FEC_MXC -#endif - -/* RTC */ -#ifdef CONFIG_CMD_DATE -/* Use the internal RTC in the MXS chip */ -#define CONFIG_RTC_INTERNAL -#ifdef CONFIG_RTC_INTERNAL -#define CONFIG_RTC_MXS -#else -#define CONFIG_RTC_M41T62 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#define CONFIG_SYS_M41T11_BASE_YEAR 2000 -#endif -#endif - -/* USB */ -#ifdef CONFIG_CMD_USB -#define CONFIG_EHCI_MXS_PORT0 -#define CONFIG_EHCI_MXS_PORT1 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 -#endif - -/* SPI */ -#ifdef CONFIG_CMD_SPI -#define CONFIG_DEFAULT_SPI_BUS 2 -#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0 - -/* SPI FLASH */ -#ifdef CONFIG_CMD_SF -#define CONFIG_SF_DEFAULT_BUS 2 -#define CONFIG_SF_DEFAULT_CS 0 -#define CONFIG_SF_DEFAULT_SPEED 40000000 -#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 - -#define CONFIG_ENV_SPI_BUS 2 -#define CONFIG_ENV_SPI_CS 0 -#define CONFIG_ENV_SPI_MAX_HZ 40000000 -#define CONFIG_ENV_SPI_MODE SPI_MODE_0 -#endif - -#endif - -/* LCD */ -#ifdef CONFIG_VIDEO -#define CONFIG_VIDEO_LOGO -#define CONFIG_SPLASH_SCREEN -#define CONFIG_BMP_16BPP -#define CONFIG_VIDEO_BMP_RLE8 -#define CONFIG_VIDEO_BMP_GZIP -#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) -#endif - -/* Booting Linux */ -#define CONFIG_BOOTFILE "fitImage" -#define CONFIG_BOOTCOMMAND "run mmc_mmc" -#define CONFIG_LOADADDR 0x42000000 -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR - -/* Extra Environment */ -#define CONFIG_PREBOOT "run try_bootscript" -#define CONFIG_HOSTNAME "m28evk" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "consdev=ttyAMA0\0" \ - "baudrate=115200\0" \ - "bootscript=boot.scr\0" \ - "bootdev=/dev/mmcblk0p2\0" \ - "rootdev=/dev/mmcblk0p3\0" \ - "netdev=eth0\0" \ - "hostname=m28evk\0" \ - "rootpath=/opt/eldk-5.5/armv5te/rootfs-qte-sdk\0" \ - "kernel_addr_r=0x42000000\0" \ - "videomode=video=ctfb:x:800,y:480,depth:18,mode:0,pclk:30066," \ - "le:0,ri:256,up:0,lo:45,hs:1,vs:1,sync:100663296," \ - "vmode:0\0" \ - "update_nand_full_filename=u-boot.nand\0" \ - "update_nand_firmware_filename=u-boot.sb\0" \ - "update_sd_firmware_filename=u-boot.sd\0" \ - "update_nand_firmware_maxsz=0x100000\0" \ - "update_nand_stride=0x40\0" /* MX28 datasheet ch. 12.12 */ \ - "update_nand_count=0x4\0" /* MX28 datasheet ch. 12.12 */ \ - "update_nand_get_fcb_size=" /* Get size of FCB blocks */ \ - "nand device 0 ; " \ - "nand info ; " \ - "setexpr fcb_sz ${update_nand_stride} * ${update_nand_count};" \ - "setexpr update_nand_fcb ${fcb_sz} * ${nand_writesize}\0" \ - "update_nand_full=" /* Update FCB, DBBT and FW */ \ - "if tftp ${update_nand_full_filename} ; then " \ - "run update_nand_get_fcb_size ; " \ - "nand scrub -y 0x0 ${filesize} ; " \ - "nand write.raw ${loadaddr} 0x0 ${fcb_sz} ; " \ - "setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \ - "setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \ - "nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \ - "fi\0" \ - "update_nand_firmware=" /* Update only firmware */ \ - "if tftp ${update_nand_firmware_filename} ; then " \ - "run update_nand_get_fcb_size ; " \ - "setexpr fcb_sz ${update_nand_fcb} * 2 ; " /* FCB + DBBT */ \ - "setexpr fw_sz ${update_nand_firmware_maxsz} * 2 ; " \ - "setexpr fw_off ${fcb_sz} + ${update_nand_firmware_maxsz};" \ - "nand erase ${fcb_sz} ${fw_sz} ; " \ - "nand write ${loadaddr} ${fcb_sz} ${filesize} ; " \ - "nand write ${loadaddr} ${fw_off} ${filesize} ; " \ - "fi\0" \ - "update_sd_firmware=" /* Update the SD firmware partition */ \ - "if mmc rescan ; then " \ - "if tftp ${update_sd_firmware_filename} ; then " \ - "setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \ - "setexpr fw_sz ${fw_sz} + 1 ; " \ - "mmc write ${loadaddr} 0x800 ${fw_sz} ; " \ - "fi ; " \ - "fi\0" \ - "addcons=" \ - "setenv bootargs ${bootargs} " \ - "console=${consdev},${baudrate}\0" \ - "addip=" \ - "setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:" \ - "${netmask}:${hostname}:${netdev}:off\0" \ - "addmisc=" \ - "setenv bootargs ${bootargs} ${miscargs}\0" \ - "adddfltmtd=" \ - "if test \"x${mtdparts}\" == \"x\" ; then " \ - "mtdparts default ; " \ - "fi\0" \ - "addmtd=" \ - "run adddfltmtd ; " \ - "setenv bootargs ${bootargs} ${mtdparts}\0" \ - "addargs=run addcons addmtd addmisc\0" \ - "mmcload=" \ - "mmc rescan ; " \ - "load mmc 0:2 ${kernel_addr_r} ${bootfile}\0" \ - "ubiload=" \ - "ubi part UBI ; ubifsmount ubi0:rootfs ; " \ - "ubifsload ${kernel_addr_r} /boot/${bootfile}\0" \ - "netload=" \ - "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \ - "miscargs=nohlt panic=1\0" \ - "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \ - "ubiargs=" \ - "setenv bootargs ubi.mtd=5 " \ - "root=ubi0:rootfs rootfstype=ubifs\0" \ - "nfsargs=" \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath},v3,tcp\0" \ - "mmc_mmc=" \ - "run mmcload mmcargs addargs ; " \ - "bootm ${kernel_addr_r}\0" \ - "mmc_ubi=" \ - "run mmcload ubiargs addargs ; " \ - "bootm ${kernel_addr_r}\0" \ - "mmc_nfs=" \ - "run mmcload nfsargs addip addargs ; " \ - "bootm ${kernel_addr_r}\0" \ - "ubi_mmc=" \ - "run ubiload mmcargs addargs ; " \ - "bootm ${kernel_addr_r}\0" \ - "ubi_ubi=" \ - "run ubiload ubiargs addargs ; " \ - "bootm ${kernel_addr_r}\0" \ - "ubi_nfs=" \ - "run ubiload nfsargs addip addargs ; " \ - "bootm ${kernel_addr_r}\0" \ - "net_mmc=" \ - "run netload mmcargs addargs ; " \ - "bootm ${kernel_addr_r}\0" \ - "net_ubi=" \ - "run netload ubiargs addargs ; " \ - "bootm ${kernel_addr_r}\0" \ - "net_nfs=" \ - "run netload nfsargs addip addargs ; " \ - "bootm ${kernel_addr_r}\0" \ - "try_bootscript=" \ - "mmc rescan;" \ - "if test -e mmc 0:2 ${bootscript} ; then " \ - "if load mmc 0:2 ${kernel_addr_r} ${bootscript};" \ - "then ; " \ - "echo Running bootscript... ; " \ - "source ${kernel_addr_r} ; " \ - "fi ; " \ - "fi\0" - -/* The rest of the configuration is shared */ -#include <configs/mxs.h> - -#endif /* __CONFIGS_M28EVK_H__ */ |