diff options
Diffstat (limited to 'include/configs/T208xQDS.h')
| -rw-r--r-- | include/configs/T208xQDS.h | 61 |
1 files changed, 8 insertions, 53 deletions
diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index f61b40f..57640ac 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -29,8 +29,6 @@ #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS #ifdef CONFIG_RAMBOOT_PBL -#define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xqds/t208x_pbi.cfg - #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_PAD_TO 0x40000 #define CONFIG_SPL_MAX_SIZE 0x28000 @@ -47,9 +45,6 @@ #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) -#if defined(CONFIG_ARCH_T2080) -#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_nand_rcw.cfg -#endif #endif #ifdef CONFIG_SPIFLASH @@ -62,9 +57,6 @@ #ifndef CONFIG_SPL_BUILD #define CONFIG_SYS_MPC85XX_NO_RESETVEC #endif -#if defined(CONFIG_ARCH_T2080) -#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_spi_rcw.cfg -#endif #endif #ifdef CONFIG_SDCARD @@ -76,9 +68,6 @@ #ifndef CONFIG_SPL_BUILD #define CONFIG_SYS_MPC85XX_NO_RESETVEC #endif -#if defined(CONFIG_ARCH_T2080) -#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_sd_rcw.cfg -#endif #endif #endif /* CONFIG_RAMBOOT_PBL */ @@ -101,19 +90,15 @@ */ #define CONFIG_SYS_CACHE_STASHING #define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_DDR_ECC #ifdef CONFIG_DDR_ECC -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #endif #ifndef __ASSEMBLY__ unsigned long get_board_sys_clk(void); -unsigned long get_board_ddr_clk(void); #endif #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() -#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() /* * Config the L3 Cache as L3 SRAM @@ -130,11 +115,8 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull /* EEPROM */ -#define CONFIG_ID_EEPROM #define CONFIG_SYS_I2C_EEPROM_NXID #define CONFIG_SYS_EEPROM_BUS_NUM 0 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* * DDR Setup @@ -144,7 +126,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_DIMM_SLOTS_PER_CTLR 2 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) -#define CONFIG_DDR_SPD #define CONFIG_SYS_SPD_BUS_NUM 0 #define CONFIG_SYS_SDRAM_SIZE 2048 /* for fixed parameter use */ #define SPD_EEPROM_ADDRESS1 0x51 @@ -352,7 +333,6 @@ unsigned long get_board_ddr_clk(void); GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (768 * 1024) -#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) /* * Serial Port @@ -370,23 +350,6 @@ unsigned long get_board_ddr_clk(void); /* * I2C */ -#if !CONFIG_IS_ENABLED(DM_I2C) -#define CONFIG_SYS_I2C_LEGACY -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C3_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C4_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 -#define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000 -#define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100 -#define CONFIG_SYS_FSL_I2C_SPEED 100000 -#define CONFIG_SYS_FSL_I2C2_SPEED 100000 -#define CONFIG_SYS_FSL_I2C3_SPEED 100000 -#define CONFIG_SYS_FSL_I2C4_SPEED 100000 -#endif - -#define CONFIG_SYS_I2C_FSL #define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ #define I2C_MUX_PCA_ADDR_SEC1 0x75 /* I2C bus multiplexer,secondary 1 */ @@ -613,7 +576,6 @@ unsigned long get_board_ddr_clk(void); /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ /* * For booting Linux, the board info and command line data @@ -623,11 +585,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - /* * Environment Configuration */ @@ -635,8 +592,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_BOOTFILE "uImage" #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */ -/* default location for tftp and bootm */ -#define CONFIG_LOADADDR 1000000 #define __USB_PHY_TYPE utmi #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -664,7 +619,7 @@ unsigned long get_board_ddr_clk(void); * For emulation this causes u-boot to jump to the start of the * proof point app code automatically */ -#define CONFIG_PROOF_POINTS \ +#define PROOF_POINTS \ "setenv bootargs root=/dev/$bdev rw " \ "console=$consoledev,$baudrate $othbootargs;" \ "cpu 1 release 0x29000000 - - -;" \ @@ -676,11 +631,11 @@ unsigned long get_board_ddr_clk(void); "cpu 7 release 0x29000000 - - -;" \ "go 0x29000000" -#define CONFIG_HVBOOT \ +#define HVBOOT \ "setenv bootargs config-addr=0x60000000; " \ "bootm 0x01000000 - 0x00f00000" -#define CONFIG_ALU \ +#define ALU \ "setenv bootargs root=/dev/$bdev rw " \ "console=$consoledev,$baudrate $othbootargs;" \ "cpu 1 release 0x01000000 - - -;" \ @@ -692,7 +647,7 @@ unsigned long get_board_ddr_clk(void); "cpu 7 release 0x01000000 - - -;" \ "go 0x01000000" -#define CONFIG_LINUX \ +#define LINUXBOOTCOMMAND \ "setenv bootargs root=/dev/ram rw " \ "console=$consoledev,$baudrate $othbootargs;" \ "setenv ramdiskaddr 0x02000000;" \ @@ -700,14 +655,14 @@ unsigned long get_board_ddr_clk(void); "setenv loadaddr 0x1000000;" \ "bootm $loadaddr $ramdiskaddr $fdtaddr" -#define CONFIG_HDBOOT \ +#define HDBOOT \ "setenv bootargs root=/dev/$bdev rw " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $loadaddr $bootfile;" \ "tftp $fdtaddr $fdtfile;" \ "bootm $loadaddr - $fdtaddr" -#define CONFIG_NFSBOOTCOMMAND \ +#define NFSBOOTCOMMAND \ "setenv bootargs root=/dev/nfs rw " \ "nfsroot=$serverip:$rootpath " \ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ @@ -716,7 +671,7 @@ unsigned long get_board_ddr_clk(void); "tftp $fdtaddr $fdtfile;" \ "bootm $loadaddr - $fdtaddr" -#define CONFIG_RAMBOOTCOMMAND \ +#define RAMBOOTCOMMAND \ "setenv bootargs root=/dev/ram rw " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $ramdiskaddr $ramdiskfile;" \ @@ -724,7 +679,7 @@ unsigned long get_board_ddr_clk(void); "tftp $fdtaddr $fdtfile;" \ "bootm $loadaddr $ramdiskaddr $fdtaddr" -#define CONFIG_BOOTCOMMAND CONFIG_LINUX +#define CONFIG_BOOTCOMMAND LINUXBOOTCOMMAND #include <asm/fsl_secure_boot.h> |