aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/gpio/Kconfig8
-rw-r--r--drivers/i2c/omap24xx_i2c.c6
-rw-r--r--drivers/power/Kconfig1
-rw-r--r--drivers/serial/ns16550.c10
-rw-r--r--drivers/spi/omap3_spi.c3
-rw-r--r--drivers/usb/host/Kconfig19
-rw-r--r--drivers/usb/host/Makefile2
-rw-r--r--drivers/usb/musb-new/linux-compat.h2
-rw-r--r--drivers/usb/musb-new/omap2430.c2
-rw-r--r--drivers/usb/musb/omap3.c6
-rw-r--r--drivers/usb/musb/omap3.h2
-rw-r--r--drivers/watchdog/Kconfig8
12 files changed, 43 insertions, 26 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 325d053..15135e5 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -95,6 +95,14 @@ config MSM_GPIO
- APQ8016
- MSM8916
+config OMAP_GPIO
+ bool "TI OMAP GPIO driver"
+ depends on ARCH_OMAP2PLUS
+ default y
+ help
+ Support GPIO controllers on the TI OMAP3/4/5 and related (such as
+ AM335x/AM43xx/AM57xx/DRA7xx/etc) families of SoCs.
+
config PM8916_GPIO
bool "Qualcomm PM8916 PMIC GPIO/keypad driver"
depends on DM_GPIO && PMIC_PM8916
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index a23737a..4b8397a 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -122,7 +122,7 @@ static int wait_for_bb(struct i2c *i2c_base, int waitdelay)
u16 stat;
writew(0xFFFF, &i2c_base->stat); /* clear current interrupts...*/
-#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
+#if defined(CONFIG_OMAP34XX)
while ((stat = readw(&i2c_base->stat) & I2C_STAT_BB) && timeout--) {
#else
/* Read RAW status */
@@ -153,7 +153,7 @@ static u16 wait_for_event(struct i2c *i2c_base, int waitdelay)
do {
udelay(waitdelay);
-#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
+#if defined(CONFIG_OMAP34XX)
status = readw(&i2c_base->stat);
#else
/* Read RAW status */
@@ -338,7 +338,7 @@ retry:
/* own address */
writew(slaveadd, &i2c_base->oa);
-#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
+#if defined(CONFIG_OMAP34XX)
/*
* Have to enable interrupts for OMAP2/3, these IPs don't have
* an 'irqstatus_raw' register and we shall have to poll 'stat'
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index a7d56e6..d8c107e 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -311,6 +311,7 @@ config SY8106A_VOUT1_VOLT
config TWL4030_POWER
depends on OMAP34XX
bool "Enable driver for TI TWL4030 power management chip"
+ imply CMD_POWEROFF
---help---
The TWL4030 in a combination audio CODEC/power management with
GPIO and it is commonly used with the OMAP3 family of processors
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index ca55df7..0eb7c02 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -175,21 +175,17 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
;
serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
-#if defined(CONFIG_OMAP) || defined(CONFIG_AM33XX) || \
- defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX)
+#if defined(CONFIG_ARCH_OMAP2PLUS)
serial_out(0x7, &com_port->mdr1); /* mode select reset TL16C750*/
#endif
serial_out(UART_MCRVAL, &com_port->mcr);
serial_out(ns16550_getfcr(com_port), &com_port->fcr);
if (baud_divisor != -1)
NS16550_setbrg(com_port, baud_divisor);
-#if defined(CONFIG_OMAP) || \
- defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) || \
- defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX)
-
+#if defined(CONFIG_ARCH_OMAP2PLUS) || defined(CONFIG_SOC_DA8XX)
/* /16 is proper to hit 115200 with 48MHz */
serial_out(0, &com_port->mdr1);
-#endif /* CONFIG_OMAP */
+#endif
#if defined(CONFIG_SOC_KEYSTONE)
serial_out(UART_REG_VAL_PWREMU_MGMT_UART_ENABLE, &com_port->regC);
#endif
diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c
index 76d376a..3caea15 100644
--- a/drivers/spi/omap3_spi.c
+++ b/drivers/spi/omap3_spi.c
@@ -568,7 +568,8 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
priv->freq = max_hz;
priv->mode = mode;
priv->wordlen = priv->slave.wordlen;
-#ifdef CONFIG_OMAP3_SPI_D0_D1_SWAPPED
+#if 0
+ /* Please migrate to DM_SPI support for this feature. */
priv->pin_dir = MCSPI_PINDIR_D0_OUT_D1_IN;
#endif
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index fb5aa6f..9a67e43 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -57,6 +57,7 @@ endif # USB_XHCI_HCD
config USB_EHCI_HCD
bool "EHCI HCD (USB 2.0) support"
+ default y if ARCH_MX5 || ARCH_MX6
select USB_HOST
---help---
The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
@@ -74,12 +75,6 @@ config USB_EHCI_HCD
You may want to read <file:Documentation/usb/ehci.txt>.
-config USB_EHCI
- bool
- default USB_EHCI_HCD
- ---help---
- TODO: rename after most boards switch to Kconfig
-
if USB_EHCI_HCD
config USB_EHCI_ATMEL
@@ -90,8 +85,8 @@ config USB_EHCI_ATMEL
Enables support for the on-chip EHCI controller on Atmel chips.
config USB_EHCI_MARVELL
- bool "Support for MVEBU (AXP / A38x) on-chip EHCI USB controller"
- depends on ARCH_MVEBU
+ bool "Support for Marvell on-chip EHCI USB controller"
+ depends on ARCH_MVEBU || KIRKWOOD || ORION5X
default y
---help---
Enables support for the on-chip EHCI controller on MVEBU SoCs.
@@ -110,6 +105,14 @@ config USB_EHCI_MX7
---help---
Enables support for the on-chip EHCI controller on i.MX7 SoCs.
+config USB_EHCI_OMAP
+ bool "Support for OMAP3+ on-chip EHCI USB controller"
+ depends on ARCH_OMAP2PLUS
+ default y
+ ---help---
+ Enables support for the on-chip EHCI controller on OMAP3 and later
+ SoCs.
+
if USB_EHCI_MX7
config MXC_USB_OTG_HACTIVE
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 58c0cf5..bf354fe 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -24,7 +24,7 @@ obj-$(CONFIG_USB_OHCI_LPC32XX) += ohci-lpc32xx.o
obj-$(CONFIG_USB_OHCI_GENERIC) += ohci-generic.o
# echi
-obj-$(CONFIG_USB_EHCI) += ehci-hcd.o
+obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
obj-$(CONFIG_USB_EHCI_ARMADA100) += ehci-armada100.o utmi-armada100.o
obj-$(CONFIG_USB_EHCI_ATMEL) += ehci-atmel.o
ifdef CONFIG_MPC512X
diff --git a/drivers/usb/musb-new/linux-compat.h b/drivers/usb/musb-new/linux-compat.h
index 9244977..4dae83e 100644
--- a/drivers/usb/musb-new/linux-compat.h
+++ b/drivers/usb/musb-new/linux-compat.h
@@ -30,7 +30,7 @@
#define CONFIG_SOC_OMAP3430
#endif
-#ifdef CONFIG_OMAP4430
+#ifdef CONFIG_OMAP44XX
#define CONFIG_ARCH_OMAP4
#endif
diff --git a/drivers/usb/musb-new/omap2430.c b/drivers/usb/musb-new/omap2430.c
index 684ad95..ba22dfe 100644
--- a/drivers/usb/musb-new/omap2430.c
+++ b/drivers/usb/musb-new/omap2430.c
@@ -441,7 +441,7 @@ static int omap2430_musb_enable(struct musb *musb)
twl6030_usb_device_settings();
#endif
-#ifdef CONFIG_OMAP4430
+#ifdef CONFIG_OMAP44XX
u32 *usbotghs_control = (u32 *)((*ctrl)->control_usbotghs_ctrl);
*usbotghs_control = USBOTGHS_CONTROL_AVALID |
USBOTGHS_CONTROL_VBUSVALID | USBOTGHS_CONTROL_IDDIG;
diff --git a/drivers/usb/musb/omap3.c b/drivers/usb/musb/omap3.c
index 97da529..57889ef 100644
--- a/drivers/usb/musb/omap3.c
+++ b/drivers/usb/musb/omap3.c
@@ -55,7 +55,7 @@ static struct omap3_otg_regs *otg;
#define OMAP3_OTG_SYSSTATUS_RESETDONE 0x0001
/* OMAP4430 has an internal PHY, use it */
-#ifdef CONFIG_OMAP4430
+#ifdef CONFIG_OMAP44XX
#define OMAP3_OTG_INTERFSEL_OMAP 0x0000
#else
#define OMAP3_OTG_INTERFSEL_OMAP 0x0001
@@ -118,11 +118,11 @@ int musb_platform_init(void)
stdby &= ~OMAP3_OTG_FORCESTDBY_STANDBY;
writel(stdby, &otg->forcestdby);
-#ifdef CONFIG_OMAP3_EVM
+#ifdef CONFIG_TARGET_OMAP3_EVM
musb_cfg.extvbus = omap3_evm_need_extvbus();
#endif
-#ifdef CONFIG_OMAP4430
+#ifdef CONFIG_OMAP44XX
u32 *usbotghs_control =
(u32 *)((*ctrl)->control_usbotghs_ctrl);
*usbotghs_control = 0x15;
diff --git a/drivers/usb/musb/omap3.h b/drivers/usb/musb/omap3.h
index ae645c7..d91ad0a 100644
--- a/drivers/usb/musb/omap3.h
+++ b/drivers/usb/musb/omap3.h
@@ -32,7 +32,7 @@
int musb_platform_init(void);
-#ifdef CONFIG_OMAP3_EVM
+#ifdef CONFIG_TARGET_OMAP3_EVM
extern u8 omap3_evm_need_extvbus(void);
#endif
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index bdaf5d4..22a7c4f 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -12,6 +12,14 @@ config BCM2835_WDT
This provides basic infrastructure to support BCM2835/2836 watchdog
hardware, with a max timeout of ~15secs.
+config OMAP_WATCHDOG
+ bool "TI OMAP watchdog driver"
+ depends on ARCH_OMAP2PLUS
+ select HW_WATCHDOG
+ default y if AM33XX
+ help
+ Say Y here to enable the OMAP3+ watchdog driver.
+
config ULP_WATCHDOG
bool "i.MX7ULP watchdog"
help
generated by cgit v1.1 at 2025-01-12 23:57:34 +0000