diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/mtd/spi/Kconfig | 6 | ||||
-rw-r--r-- | drivers/mtd/spi/spi-nor-ids.c | 5 | ||||
-rw-r--r-- | drivers/power/pmic/Kconfig | 14 | ||||
-rw-r--r-- | drivers/power/pmic/Makefile | 2 | ||||
-rw-r--r-- | drivers/spi/cadence_qspi_apb.c | 17 |
5 files changed, 37 insertions, 7 deletions
diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig index 408a53f..2f56d46 100644 --- a/drivers/mtd/spi/Kconfig +++ b/drivers/mtd/spi/Kconfig @@ -129,12 +129,6 @@ config SPI_FLASH_UNLOCK_ALL For legacy reasons, this option default to y. But if you intend to actually use the software protection bits you should say n here. -config SF_DUAL_FLASH - bool "SPI DUAL flash memory support" - help - Enable this option to support two flash memories connected to a single - controller. Currently Xilinx Zynq qspi supports this. - config SPI_FLASH_ATMEL bool "Atmel SPI flash support" help diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c index 3ae7bb1..b551ebd 100644 --- a/drivers/mtd/spi/spi-nor-ids.c +++ b/drivers/mtd/spi/spi-nor-ids.c @@ -355,6 +355,11 @@ const struct flash_info spi_nor_ids[] = { SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) }, + { + INFO("w25q01jv", 0xef4021, 0, 64 * 1024, 2048, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | + SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) + }, { INFO("w25q80", 0xef5014, 0, 64 * 1024, 16, SECT_4K) }, { INFO("w25q80bl", 0xef4014, 0, 64 * 1024, 16, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { INFO("w25q16cl", 0xef4015, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig index b9fda42..ce0adb1 100644 --- a/drivers/power/pmic/Kconfig +++ b/drivers/power/pmic/Kconfig @@ -128,6 +128,20 @@ config DM_PMIC_FAN53555 The driver implements read/write operations for use with the FAN53555 regulator driver and binds the regulator driver to its node. +config SPL_DM_PMIC_FAN53555 + bool "Enable support for OnSemi FAN53555 in SPL" + depends on SPL_DM_REGULATOR && SPL_DM_I2C + select SPL_DM_REGULATOR_FAN53555 + help + This config enables implementation of driver-model PMIC + uclass features for the FAN53555 regulator. The FAN53555 is + a (family of) single-output regulators that supports + transitioning between two different output voltages based on + an voltage selection pin. + + The driver implements read/write operations for use with the FAN53555 + regulator driver and binds the regulator driver to its node. + config DM_PMIC_MP5416 bool "Enable Driver Model for PMIC MP5416" help diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile index e1922df..401cde3 100644 --- a/drivers/power/pmic/Makefile +++ b/drivers/power/pmic/Makefile @@ -4,7 +4,7 @@ # Lukasz Majewski <l.majewski@samsung.com> obj-$(CONFIG_$(SPL_TPL_)DM_PMIC) += pmic-uclass.o -obj-$(CONFIG_DM_PMIC_FAN53555) += fan53555.o +obj-$(CONFIG_$(SPL_)DM_PMIC_FAN53555) += fan53555.o obj-$(CONFIG_$(SPL_)DM_PMIC_DA9063) += da9063.o obj-$(CONFIG_DM_PMIC_MAX77686) += max77686.o obj-$(CONFIG_DM_PMIC_MAX8998) += max8998.o diff --git a/drivers/spi/cadence_qspi_apb.c b/drivers/spi/cadence_qspi_apb.c index 429ee33..2cdf4c9 100644 --- a/drivers/spi/cadence_qspi_apb.c +++ b/drivers/spi/cadence_qspi_apb.c @@ -858,6 +858,14 @@ cadence_qspi_apb_indirect_read_execute(struct cadence_spi_plat *plat, writel(CQSPI_REG_INDIRECTRD_DONE, plat->regbase + CQSPI_REG_INDIRECTRD); + /* Check indirect done status */ + ret = wait_for_bit_le32(plat->regbase + CQSPI_REG_INDIRECTRD, + CQSPI_REG_INDIRECTRD_DONE, 0, 10, 0); + if (ret) { + printf("Indirect read clear completion error (%i)\n", ret); + goto failrd; + } + return 0; failrd: @@ -1012,6 +1020,15 @@ cadence_qspi_apb_indirect_write_execute(struct cadence_spi_plat *plat, /* Clear indirect completion status */ writel(CQSPI_REG_INDIRECTWR_DONE, plat->regbase + CQSPI_REG_INDIRECTWR); + + /* Check indirect done status */ + ret = wait_for_bit_le32(plat->regbase + CQSPI_REG_INDIRECTWR, + CQSPI_REG_INDIRECTWR_DONE, 0, 10, 0); + if (ret) { + printf("Indirect write clear completion error (%i)\n", ret); + goto failwr; + } + if (bounce_buf) free(bounce_buf); return 0; |