diff options
Diffstat (limited to 'drivers/spi')
| -rw-r--r-- | drivers/spi/atmel_spi.c | 2 | ||||
| -rw-r--r-- | drivers/spi/designware_spi.c | 2 | ||||
| -rw-r--r-- | drivers/spi/exynos_spi.c | 2 | ||||
| -rw-r--r-- | drivers/spi/kirkwood_spi.c | 2 | ||||
| -rw-r--r-- | drivers/spi/mtk_snfi_spi.c | 2 | ||||
| -rw-r--r-- | drivers/spi/mvebu_a3700_spi.c | 2 | ||||
| -rw-r--r-- | drivers/spi/zynq_spi.c | 2 |
7 files changed, 7 insertions, 7 deletions
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index b120664..c65733c 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -351,7 +351,7 @@ static int atmel_spi_probe(struct udevice *bus) if (ret) return ret; - bus_plat->regs = (struct at91_spi *)devfdt_get_addr(bus); + bus_plat->regs = dev_read_addr_ptr(bus); #if CONFIG_IS_ENABLED(DM_GPIO) struct atmel_spi_priv *priv = dev_get_priv(bus); diff --git a/drivers/spi/designware_spi.c b/drivers/spi/designware_spi.c index c9b14f9..2559aac 100644 --- a/drivers/spi/designware_spi.c +++ b/drivers/spi/designware_spi.c @@ -157,7 +157,7 @@ static int dw_spi_ofdata_to_platdata(struct udevice *bus) { struct dw_spi_platdata *plat = bus->platdata; - plat->regs = (struct dw_spi *)devfdt_get_addr(bus); + plat->regs = dev_read_addr_ptr(bus); /* Use 500KHz as a suitable default */ plat->frequency = dev_read_u32_default(bus, "spi-max-frequency", diff --git a/drivers/spi/exynos_spi.c b/drivers/spi/exynos_spi.c index 746686a..d338ff5 100644 --- a/drivers/spi/exynos_spi.c +++ b/drivers/spi/exynos_spi.c @@ -257,7 +257,7 @@ static int exynos_spi_ofdata_to_platdata(struct udevice *bus) const void *blob = gd->fdt_blob; int node = dev_of_offset(bus); - plat->regs = (struct exynos_spi *)devfdt_get_addr(bus); + plat->regs = dev_read_addr_ptr(bus); plat->periph_id = pinmux_decode_periph_id(blob, node); if (plat->periph_id == PERIPH_ID_NONE) { diff --git a/drivers/spi/kirkwood_spi.c b/drivers/spi/kirkwood_spi.c index 92dc2e1..dc7d2bc 100644 --- a/drivers/spi/kirkwood_spi.c +++ b/drivers/spi/kirkwood_spi.c @@ -236,7 +236,7 @@ static int mvebu_spi_ofdata_to_platdata(struct udevice *bus) const struct mvebu_spi_dev *drvdata = (struct mvebu_spi_dev *)dev_get_driver_data(bus); - plat->spireg = (struct kwspi_registers *)devfdt_get_addr(bus); + plat->spireg = dev_read_addr_ptr(bus); plat->is_errata_50mhz_ac = drvdata->is_errata_50mhz_ac; return 0; diff --git a/drivers/spi/mtk_snfi_spi.c b/drivers/spi/mtk_snfi_spi.c index 2a89476..c30c8f4 100644 --- a/drivers/spi/mtk_snfi_spi.c +++ b/drivers/spi/mtk_snfi_spi.c @@ -253,7 +253,7 @@ static int mtk_snfi_spi_probe(struct udevice *bus) struct mtk_snfi_priv *priv = dev_get_priv(bus); int ret; - priv->base = (void __iomem *)devfdt_get_addr(bus); + priv->base = dev_read_addr_ptr(bus); if (!priv->base) return -EINVAL; diff --git a/drivers/spi/mvebu_a3700_spi.c b/drivers/spi/mvebu_a3700_spi.c index 2302e62..e860b9e 100644 --- a/drivers/spi/mvebu_a3700_spi.c +++ b/drivers/spi/mvebu_a3700_spi.c @@ -255,7 +255,7 @@ static int mvebu_spi_ofdata_to_platdata(struct udevice *bus) struct mvebu_spi_platdata *plat = dev_get_platdata(bus); int ret; - plat->spireg = (struct spi_reg *)devfdt_get_addr(bus); + plat->spireg = dev_read_addr_ptr(bus); ret = clk_get_by_index(bus, 0, &plat->clk); if (ret) { diff --git a/drivers/spi/zynq_spi.c b/drivers/spi/zynq_spi.c index 78ffd3e..9923931 100644 --- a/drivers/spi/zynq_spi.c +++ b/drivers/spi/zynq_spi.c @@ -77,7 +77,7 @@ static int zynq_spi_ofdata_to_platdata(struct udevice *bus) const void *blob = gd->fdt_blob; int node = dev_of_offset(bus); - plat->regs = (struct zynq_spi_regs *)devfdt_get_addr(bus); + plat->regs = dev_read_addr_ptr(bus); /* FIXME: Use 250MHz as a suitable default */ plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency", |