diff options
Diffstat (limited to 'drivers/net/phy/realtek.c')
| -rw-r--r-- | drivers/net/phy/realtek.c | 69 |
1 files changed, 43 insertions, 26 deletions
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index b1b1fa5..24c3ea5 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -12,7 +12,6 @@ #include <linux/delay.h> #define PHY_RTL8211x_FORCE_MASTER BIT(1) -#define PHY_RTL8211E_PINE64_GIGABIT_FIX BIT(2) #define PHY_RTL8211F_FORCE_EEE_RXC_ON BIT(3) #define PHY_RTL8201F_S700_RMII_TIMINGS BIT(4) @@ -49,10 +48,10 @@ #define MIIM_RTL8211F_PHYSTAT_SPDDONE 0x0800 #define MIIM_RTL8211F_PHYSTAT_LINK 0x0004 -#define MIIM_RTL8211E_CONFREG 0x1c -#define MIIM_RTL8211E_CONFREG_TXD 0x0002 -#define MIIM_RTL8211E_CONFREG_RXD 0x0004 -#define MIIM_RTL8211E_CONFREG_MAGIC 0xb400 /* Undocumented */ +#define MIIM_RTL8211E_CONFREG 0x1c +#define MIIM_RTL8211E_CTRL_DELAY BIT(13) +#define MIIM_RTL8211E_TX_DELAY BIT(12) +#define MIIM_RTL8211E_RX_DELAY BIT(11) #define MIIM_RTL8211E_EXT_PAGE_SELECT 0x1e @@ -108,10 +107,6 @@ static int rtl8211b_probe(struct phy_device *phydev) static int rtl8211e_probe(struct phy_device *phydev) { -#ifdef CONFIG_RTL8211E_PINE64_GIGABIT_FIX - phydev->flags |= PHY_RTL8211E_PINE64_GIGABIT_FIX; -#endif - return 0; } @@ -154,22 +149,6 @@ static int rtl8211x_config(struct phy_device *phydev) reg |= MIIM_RTL8211x_CTRL1000T_MASTER; phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, reg); } - if (phydev->flags & PHY_RTL8211E_PINE64_GIGABIT_FIX) { - unsigned int reg; - - phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211F_PAGE_SELECT, - 7); - phy_write(phydev, MDIO_DEVAD_NONE, - MIIM_RTL8211E_EXT_PAGE_SELECT, 0xa4); - reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211E_CONFREG); - /* Ensure both internal delays are turned off */ - reg &= ~(MIIM_RTL8211E_CONFREG_TXD | MIIM_RTL8211E_CONFREG_RXD); - /* Flip the magic undocumented bits */ - reg |= MIIM_RTL8211E_CONFREG_MAGIC; - phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211E_CONFREG, reg); - phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211F_PAGE_SELECT, - 0); - } /* read interrupt status just to clear it */ phy_read(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211x_PHY_INER); @@ -201,6 +180,44 @@ static int rtl8201f_config(struct phy_device *phydev) return 0; } +static int rtl8211e_config(struct phy_device *phydev) +{ + int reg, val; + + /* enable TX/RX delay for rgmii-* modes, and disable them for rgmii. */ + switch (phydev->interface) { + case PHY_INTERFACE_MODE_RGMII: + val = MIIM_RTL8211E_CTRL_DELAY; + break; + case PHY_INTERFACE_MODE_RGMII_ID: + val = MIIM_RTL8211E_CTRL_DELAY | MIIM_RTL8211E_TX_DELAY | + MIIM_RTL8211E_RX_DELAY; + break; + case PHY_INTERFACE_MODE_RGMII_RXID: + val = MIIM_RTL8211E_CTRL_DELAY | MIIM_RTL8211E_RX_DELAY; + break; + case PHY_INTERFACE_MODE_RGMII_TXID: + val = MIIM_RTL8211E_CTRL_DELAY | MIIM_RTL8211E_TX_DELAY; + break; + default: /* the rest of the modes imply leaving delays as is. */ + goto default_delay; + } + + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211F_PAGE_SELECT, 7); + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211E_EXT_PAGE_SELECT, 0xa4); + + reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211E_CONFREG); + reg &= ~(MIIM_RTL8211E_TX_DELAY | MIIM_RTL8211E_RX_DELAY); + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211E_CONFREG, reg | val); + + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211F_PAGE_SELECT, 0); + +default_delay: + genphy_config_aneg(phydev); + + return 0; +} + static int rtl8211f_config(struct phy_device *phydev) { u16 reg; @@ -410,7 +427,7 @@ static struct phy_driver RTL8211E_driver = { .mask = 0xffffff, .features = PHY_GBIT_FEATURES, .probe = &rtl8211e_probe, - .config = &rtl8211x_config, + .config = &rtl8211e_config, .startup = &rtl8211e_startup, .shutdown = &genphy_shutdown, }; |