diff options
Diffstat (limited to 'drivers/mmc/davinci_mmc.c')
| -rw-r--r-- | drivers/mmc/davinci_mmc.c | 63 |
1 files changed, 26 insertions, 37 deletions
diff --git a/drivers/mmc/davinci_mmc.c b/drivers/mmc/davinci_mmc.c index 2408a68..4ef9f7c 100644 --- a/drivers/mmc/davinci_mmc.c +++ b/drivers/mmc/davinci_mmc.c @@ -18,7 +18,6 @@ #include <asm-generic/gpio.h> #include <linux/delay.h> -#define DAVINCI_MAX_BLOCKS (32) #define WATCHDOG_COUNT (100000) #define get_val(addr) REG(addr) @@ -34,12 +33,6 @@ struct davinci_mmc_priv { struct gpio_desc cd_gpio; /* Card Detect GPIO */ struct gpio_desc wp_gpio; /* Write Protect GPIO */ }; - -struct davinci_mmc_plat -{ - struct mmc_config cfg; - struct mmc mmc; -}; #endif /* Set davinci clock prescalar value based on the required clock in HZ */ @@ -487,43 +480,16 @@ static int davinci_mmc_probe(struct udevice *dev) struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); struct davinci_mmc_plat *plat = dev_get_platdata(dev); struct davinci_mmc_priv *priv = dev_get_priv(dev); - struct mmc_config *cfg = &plat->cfg; -#ifdef CONFIG_SPL_BUILD - int ret; -#endif - - cfg->f_min = 200000; - cfg->f_max = 25000000; - cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34, - cfg->host_caps = MMC_MODE_4BIT, /* DA850 supports only 4-bit SD/MMC */ - cfg->b_max = DAVINCI_MAX_BLOCKS; - cfg->name = "da830-mmc"; - priv->reg_base = (struct davinci_mmc_regs *)dev_read_addr(dev); + priv->reg_base = plat->reg_base; priv->input_clk = clk_get(DAVINCI_MMCSD_CLKID); - #if CONFIG_IS_ENABLED(DM_GPIO) /* These GPIOs are optional */ gpio_request_by_name(dev, "cd-gpios", 0, &priv->cd_gpio, GPIOD_IS_IN); gpio_request_by_name(dev, "wp-gpios", 0, &priv->wp_gpio, GPIOD_IS_IN); #endif - upriv->mmc = &plat->mmc; -#ifdef CONFIG_SPL_BUILD - /* - * FIXME This is a temporary workaround to enable the driver model in - * SPL on omapl138-lcdk. For some reason the bind() callback is not - * being called in SPL for MMC which breaks the mmc boot - the hack - * is to call mmc_bind() from probe(). We also don't have full DT - * support in SPL, hence the hard-coded base register address. - */ - priv->reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE; - ret = mmc_bind(dev, &plat->mmc, &plat->cfg); - if (ret) - return ret; -#endif - return davinci_dm_mmc_init(dev); } @@ -534,21 +500,44 @@ static int davinci_mmc_bind(struct udevice *dev) return mmc_bind(dev, &plat->mmc, &plat->cfg); } +#if CONFIG_IS_ENABLED(OF_CONTROL) +static int davinci_mmc_ofdata_to_platdata(struct udevice *dev) +{ + struct davinci_mmc_plat *plat = dev_get_platdata(dev); + struct mmc_config *cfg = &plat->cfg; + + plat->reg_base = (struct davinci_mmc_regs *)dev_read_addr(dev); + cfg->f_min = 200000; + cfg->f_max = 25000000; + cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34, + cfg->host_caps = MMC_MODE_4BIT, /* DA850 supports only 4-bit SD/MMC */ + cfg->b_max = DAVINCI_MAX_BLOCKS; + cfg->name = "da830-mmc"; + + return 0; +} + static const struct udevice_id davinci_mmc_ids[] = { { .compatible = "ti,da830-mmc" }, {}, }; - +#endif U_BOOT_DRIVER(davinci_mmc_drv) = { .name = "davinci_mmc", .id = UCLASS_MMC, +#if CONFIG_IS_ENABLED(OF_CONTROL) .of_match = davinci_mmc_ids, + .platdata_auto_alloc_size = sizeof(struct davinci_mmc_plat), + .ofdata_to_platdata = davinci_mmc_ofdata_to_platdata, +#endif #if CONFIG_BLK .bind = davinci_mmc_bind, #endif .probe = davinci_mmc_probe, .ops = &davinci_mmc_ops, - .platdata_auto_alloc_size = sizeof(struct davinci_mmc_plat), .priv_auto_alloc_size = sizeof(struct davinci_mmc_priv), +#if !CONFIG_IS_ENABLED(OF_CONTROL) + .flags = DM_FLAG_PRE_RELOC, +#endif }; #endif |