diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/device-tree-bindings/remoteproc/ti,k3-dsp-rproc.txt | 101 |
1 files changed, 101 insertions, 0 deletions
diff --git a/doc/device-tree-bindings/remoteproc/ti,k3-dsp-rproc.txt b/doc/device-tree-bindings/remoteproc/ti,k3-dsp-rproc.txt new file mode 100644 index 0000000..80ab7a4 --- /dev/null +++ b/doc/device-tree-bindings/remoteproc/ti,k3-dsp-rproc.txt @@ -0,0 +1,101 @@ +TI K3 DSP devices +================= + +The TI K3 family of SoCs usually have one or more TI DSP Core sub-systems that +are used to offload some of the processor-intensive tasks or algorithms, for +achieving various system level goals. + +These processor sub-systems usually contain additional sub-modules like L1 +and/or L2 caches/SRAMs, an Interrupt Controller, an external memory controller, +a dedicated local power/sleep controller etc. The DSP processor cores in the +K3 SoCs is usually either a TMS320C66x CorePac processor or a TMS320C71x CorePac +processor. + +DSP Device Node: +================ +Each DSP Core sub-system is represented as a single DT node. Each node has a +number of required or optional properties that enable the OS running on the +host processor (Arm CorePac) to perform the device management of the remote +processor and to communicate with the remote processor. + +Required properties: +-------------------- +The following are the mandatory properties: + +- compatible: Should be one of the following, + "ti,j721e-c66-dsp" for C66x DSPs on K3 J721E SoCs + "ti,j721e-c71-dsp" for C71x DSPs on K3 J721E SoCs + +- reg: Should contain an entry for each value in 'reg-names'. + Each entry should have the memory region's start address + and the size of the region, the representation matching + the parent node's '#address-cells' and '#size-cells' values. + +- reg-names: Should contain strings with the following names, each + representing a specific internal memory region (if + present), and should be defined in this order, + "l2sram", "l1pram", "l1dram" + NOTE: C71x DSPs do not have a "l1pram" memory. + +- ti,sci: Should be a phandle to the TI-SCI System Controller node + +- ti,sci-dev-id: Should contain the TI-SCI device id corresponding to the + DSP Core. Please refer to the corresponding System + Controller documentation for valid values for the DSP + cores. + +- ti,sci-proc-ids: Should contain 2 integer values. The first cell should + contain the TI-SCI processor id for the DSP core device + and the second cell should contain the TI-SCI host id to + which the processor control ownership should be + transferred to. + +- resets: Should contain the phandle to the reset controller node + managing the resets for this device, and a reset + specifier. Please refer to the following reset bindings + for the reset argument specifier, + Documentation/devicetree/bindings/reset/ti,sci-reset.txt + +Example: +--------- + +1. J721E SoC + /* J721E remoteproc alias */ + aliases { + rproc6 = &c66_0; + rproc8 = &c71_0; + }; + + cbass_main: interconnect@100000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71_0 */ + <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */ + <0x4d 0x81800000 0x4d 0x81800000 0x00 0x00800000>; /* C66_1 */ + + /* J721E C66_0 DSP node */ + c66_0: dsp@4d80800000 { + compatible = "ti,j721e-c66-dsp"; + reg = <0x4d 0x80800000 0x00 0x00048000>, + <0x4d 0x80e00000 0x00 0x00008000>, + <0x4d 0x80f00000 0x00 0x00008000>; + reg-names = "l2sram", "l1pram", "l1dram"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <142>; + ti,sci-proc-ids = <0x03 0xFF>; + resets = <&k3_reset 142 1>; + }; + + /* J721E C71_0 DSP node */ + c71_0: dsp@64800000 { + compatible = "ti,j721e-c71-dsp"; + reg = <0x00 0x64800000 0x00 0x00080000>, + <0x00 0x64e00000 0x00 0x0000c000>; + reg-names = "l2sram", "l1dram"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <15>; + ti,sci-proc-ids = <0x30 0xFF>; + resets = <&k3_reset 15 1>; + }; + }; |