diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/board/intel/edison.rst | 49 |
1 files changed, 29 insertions, 20 deletions
diff --git a/doc/board/intel/edison.rst b/doc/board/intel/edison.rst index d658fac..5a65673 100644 --- a/doc/board/intel/edison.rst +++ b/doc/board/intel/edison.rst @@ -23,38 +23,48 @@ use. more step (if and only if you have original U-Boot), i.e. run the following command:: - $ truncate -s %4096 u-boot.bin + $ truncate -s %4096 u-boot.bin 2. Run your board and interrupt booting to U-Boot console. In the console call:: - => run do_force_flash_os + => run do_force_flash_os 3. Wait for few seconds, it will prepare environment variable and runs DFU. Run DFU command from the host system:: - $ dfu-util -v -d 8087:0a99 --alt u-boot0 -D u-boot.bin + $ dfu-util -v -d 8087:0a99 --alt u-boot0 -D u-boot.bin 4. Return to U-Boot console and following hint. i.e. push Ctrl+C, and reset the board:: - => reset - + => reset Updating U-Boot using xFSTK --------------------------- You can also update U-Boot using the xfstk-dldr-solo tool if you can build it. -One way to do that is to follow the `xFSTK`_ instructions. You may need to use -a virtual machine running Ubuntu Trusty. Once you have built it and installed -libboost-all-dev, you can copy xfstk-dldr-solo to /usr/local/bin and +One way to do that is to follow the `xFSTK`_ instructions. In short, after you +install all necessary dependencies and clone repository, it will look like this: + +.. code-block:: sh + + cd xFSTK + export DISTRIBUTION_NAME=ubuntu20.04 + export BUILD_VERSION=1.8.5 + git checkout v$BUILD_VERSION + ... + +Once you have built it, you can copy xfstk-dldr-solo to /usr/local/bin and libboost_program_options.so.1.54.0 to /usr/lib/i386-linux-gnu/ and with luck -it will work. You might fine this `drive`_ helpful. +it will work. You might find this `drive`_ helpful. + +If it does, then you can download and unpack the Edison recovery image, +install dfu-util, reset your board and flash U-Boot like this: -If it does, then you can download and unpack the Edison reocovery image, -install dfu-util, reset your board and flash U-Boot like this:: +.. code-block:: sh - $ xfstk-dldr-solo --gpflags 0x80000007 \ + xfstk-dldr-solo --gpflags 0x80000007 \ --osimage u-boot-edison.img \ --fwdnx recover/edison_dnx_fwr.bin \ --fwimage recover/edison_ifwi-dbg-00.bin \ @@ -64,7 +74,7 @@ This should show the following .. code-block:: none - XFSTK Downloader Solo 0.0.0 + XFSTK Downloader Solo 1.8.5 Copyright (c) 2015 Intel Corporation Build date and time: Aug 15 2020 15:07:13 @@ -75,13 +85,12 @@ This should show the following .......(lots of dots)........XFSTK-STATUS--Reconnecting to device - Attempt #1 .......(even more dots)...................... - You have about 10 seconds after resetting the board to type the above command. If you want to check if the board is ready, type: .. code-block:: none - lsusb |egrep "8087|8086" + lsusb | egrep "8087|8086" Bus 001 Device 004: ID 8086:e005 Intel Corp. If you see a device with the same ID as above, the board is waiting for your @@ -112,9 +121,9 @@ After about 5 seconds you should see some console output from the board: *** Ready to receive application *** - After another 10 seconds the xFSTK tool completes and the board resets. About - 10 seconds after that should see the above message again and then within a - few seconds U-Boot should start on your board: +After another 10 seconds the xFSTK tool completes and the board resets. About +10 seconds after that should see the above message again and then within a few +seconds U-Boot should start on your board: .. code-block:: none @@ -146,7 +155,7 @@ After about 5 seconds you should see some console output from the board: Building boot_params at 0x00090000 Loading bzImage at address 100000 (5427456 bytes) Magic signature found - Kernel command line: "rootwait root=PARTUUID=ada722ed-6410-764e-8619-abff6f66e10e rootfstype=ext4 console=ttyMFD2 earlyprintk=ttyMFD2,keep loglevel=4 g_multi.ethernet_config=cdc systemd.unit=multi-user.target hardware_id=00 g_multi.iSerialNumber=2249baf774c675598661a63098c0ad41 g_multi.dev_addr=02:00:86:c0:ad:41 platform_mrfld_audio.audio_codec=dummy" + Kernel command line: "rootwait ..." Magic signature found Starting kernel ... @@ -157,5 +166,5 @@ After about 5 seconds you should see some console output from the board: edison login: -.. _xFSTK: https://community.intel.com/t5/Intel-Makers/Building-xFSTK-on-Ubuntu-14-04-32-bit-for-flashing-Edison/td-p/538081 +.. _xFSTK: https://github.com/edison-fw/xFSTK .. _drive: https://drive.google.com/drive/u/0/folders/1URPHrOk9-UBsh8hjv-7WwC0W6Fy61uAJ |