aboutsummaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
Diffstat (limited to 'doc')
-rw-r--r--doc/board/amlogic/libretech-cc.rst110
1 files changed, 41 insertions, 69 deletions
diff --git a/doc/board/amlogic/libretech-cc.rst b/doc/board/amlogic/libretech-cc.rst
index 596ce45..08a84a4 100644
--- a/doc/board/amlogic/libretech-cc.rst
+++ b/doc/board/amlogic/libretech-cc.rst
@@ -1,12 +1,12 @@
.. SPDX-License-Identifier: GPL-2.0+
-U-Boot for LibreTech CCs
-========================
+U-Boot for LibreTech CC 'LePotato' (S905X)
+==========================================
-LibreTech CC is a single board computer manufactured by Libre Technology
-with the following specifications:
+LibreTech CC is a Single Board Computer manufactured by Libre Computer Technology with
+the following specifications:
-V1:
+v1:
- Amlogic S905X ARM Cortex-A53 quad-core SoC @ 1.5GHz
- ARM Mali 450 GPU
@@ -19,14 +19,14 @@ V1:
- Infrared receiver
- Jack for CVBS and Audio
-V2:
+v2:
- Added SPI NOR
- Removed Jack
Schematics are available on the manufacturer website.
-U-Boot compilation
+U-Boot Compilation
------------------
.. code-block:: bash
@@ -37,36 +37,21 @@ U-Boot compilation
Use libretech-cc_v2_defconfig for v2.
-Image creation
---------------
-
-To boot the system, u-boot must be combined with several earlier stage
-bootloaders:
-
-* bl2.bin: vendor-provided binary blob
-* bl21.bin: built from vendor u-boot source
-* bl30.bin: vendor-provided binary blob
-* bl301.bin: built from vendor u-boot source
-* bl31.bin: vendor-provided binary blob
-* acs.bin: built from vendor u-boot source
-
-These binaries and the tools required below have been collected and prebuilt
-for convenience at <https://github.com/BayLibre/u-boot/releases/>. These
-apply to both v1 and v2.
-
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `lepotato`
-
-Download and extract the libretech-cc release from there, and set FIPDIR to
-point to the `fip` subdirectory.
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
.. code-block:: bash
- $ export FIPDIR=/path/to/extracted/fip
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh lepotato /path/to/u-boot/u-boot.bin my-output-dir
-Alternatively, you can obtain the original vendor u-boot tree which
-contains the required blobs and sources, and build yourself.
-Note that old compilers are required for this to build. The compilers here
-are suggested by Amlogic, and they are 32-bit x86 binaries.
+U-Boot Manual Signing
+---------------------
+
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image so it is necessary to obtain binaries from sources published by the board vendor:
.. code-block:: bash
@@ -81,9 +66,7 @@ are suggested by Amlogic, and they are 32-bit x86 binaries.
$ make
$ export FIPDIR=$PWD/fip
-Once you have the binaries available (either through the prebuilt download,
-or having built the vendor u-boot yourself), you can then proceed to glue
-everything together. Go back to mainline U-Boot source tree then :
+Go back to the mainline U-Boot source tree then:
.. code-block:: bash
@@ -98,51 +81,40 @@ everything together. Go back to mainline U-Boot source tree then :
$ cp u-boot.bin fip/bl33.bin
$ $FIPDIR/blx_fix.sh \
- fip/bl30.bin \
- fip/zero_tmp \
- fip/bl30_zero.bin \
- fip/bl301.bin \
- fip/bl301_zero.bin \
- fip/bl30_new.bin \
- bl30
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
$ $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
$ $FIPDIR/blx_fix.sh \
- fip/bl2_acs.bin \
- fip/zero_tmp \
- fip/bl2_zero.bin \
- fip/bl21.bin \
- fip/bl21_zero.bin \
- fip/bl2_new.bin \
- bl2
+ fip/bl2_acs.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/bl21.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
$ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin
$ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img
$ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin
$ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig
$ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \
- --output fip/u-boot.bin \
- --bl2 fip/bl2.n.bin.sig \
- --bl30 fip/bl30_new.bin.enc \
- --bl31 fip/bl31.img.enc \
- --bl33 fip/bl33.bin.enc
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc
-and then write the image to SD with:
+Then write U-Boot to SD or eMMC with:
.. code-block:: bash
- $ DEV=/dev/your_sd_device
+ $ DEV=/dev/boot_device
$ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
- $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
-
-Note that Amlogic provides aml_encrypt_gxl as a 32-bit x86 binary with no
-source code. Should you prefer to avoid that, there are open source reverse
-engineered versions available:
-
-1. gxlimg <https://github.com/repk/gxlimg>, which comes with a handy
- Makefile that automates the whole process.
-2. meson-tools <https://github.com/afaerber/meson-tools>
-
-However, these community-developed alternatives are not endorsed by or
-supported by Amlogic.
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440