aboutsummaryrefslogtreecommitdiff
path: root/cmd
diff options
context:
space:
mode:
Diffstat (limited to 'cmd')
-rw-r--r--cmd/date.c4
-rw-r--r--cmd/eeprom.c2
-rw-r--r--cmd/i2c.c24
3 files changed, 15 insertions, 15 deletions
diff --git a/cmd/date.c b/cmd/date.c
index 0e11894..e377cfe 100644
--- a/cmd/date.c
+++ b/cmd/date.c
@@ -46,7 +46,7 @@ static int do_date(struct cmd_tbl *cmdtp, int flag, int argc,
printf("Cannot find RTC: err=%d\n", rcode);
return CMD_RET_FAILURE;
}
-#elif defined(CONFIG_SYS_I2C)
+#elif defined(CONFIG_SYS_I2C_LEGACY)
old_bus = i2c_get_bus_num();
i2c_set_bus_num(CONFIG_SYS_RTC_BUS_NUM);
#else
@@ -119,7 +119,7 @@ static int do_date(struct cmd_tbl *cmdtp, int flag, int argc,
}
/* switch back to original I2C bus */
-#ifdef CONFIG_SYS_I2C
+#ifdef CONFIG_SYS_I2C_LEGACY
i2c_set_bus_num(old_bus);
#elif !defined(CONFIG_DM_RTC)
I2C_SET_BUS(old_bus);
diff --git a/cmd/eeprom.c b/cmd/eeprom.c
index b3fd37c..efd6f3a 100644
--- a/cmd/eeprom.c
+++ b/cmd/eeprom.c
@@ -75,7 +75,7 @@ void eeprom_init(int bus)
/* I2C EEPROM */
#if CONFIG_IS_ENABLED(DM_I2C)
eeprom_i2c_bus = bus;
-#elif defined(CONFIG_SYS_I2C)
+#elif defined(CONFIG_SYS_I2C_LEGACY)
if (bus >= 0)
i2c_set_bus_num(bus);
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
diff --git a/cmd/i2c.c b/cmd/i2c.c
index 5d0e207..0e1895a 100644
--- a/cmd/i2c.c
+++ b/cmd/i2c.c
@@ -98,7 +98,7 @@ static uint i2c_mm_last_alen;
* pairs. The following macros take care of this */
#if defined(CONFIG_SYS_I2C_NOPROBES)
-#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MULTI_BUS)
+#if defined(CONFIG_SYS_I2C_LEGACY) || defined(CONFIG_I2C_MULTI_BUS)
static struct
{
uchar bus;
@@ -114,7 +114,7 @@ static uchar i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES;
#define COMPARE_BUS(b,i) ((b) == 0) /* Make compiler happy */
#define COMPARE_ADDR(a,i) (i2c_no_probes[(i)] == (a))
#define NO_PROBE_ADDR(i) i2c_no_probes[(i)]
-#endif /* defined(CONFIG_SYS_I2C) */
+#endif /* defined(CONFIG_SYS_I2C_LEGACY) */
#endif
#define DISP_LINE_LEN 16
@@ -209,7 +209,7 @@ void i2c_init_board(void)
*
* Returns I2C bus speed in Hz.
*/
-#if !defined(CONFIG_SYS_I2C) && !CONFIG_IS_ENABLED(DM_I2C)
+#if !defined(CONFIG_SYS_I2C_LEGACY) && !CONFIG_IS_ENABLED(DM_I2C)
/*
* TODO: Implement architecture-specific get/set functions
* Should go away, if we switched completely to new multibus support
@@ -1725,7 +1725,7 @@ static void show_bus(struct udevice *bus)
*
* Returns zero always.
*/
-#if defined(CONFIG_SYS_I2C) || CONFIG_IS_ENABLED(DM_I2C)
+#if defined(CONFIG_SYS_I2C_LEGACY) || CONFIG_IS_ENABLED(DM_I2C)
static int do_i2c_show_bus(struct cmd_tbl *cmdtp, int flag, int argc,
char *const argv[])
{
@@ -1811,7 +1811,7 @@ static int do_i2c_show_bus(struct cmd_tbl *cmdtp, int flag, int argc,
* Returns zero on success, CMD_RET_USAGE in case of misuse and negative
* on error.
*/
-#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MULTI_BUS) || \
+#if defined(CONFIG_SYS_I2C_LEGACY) || defined(CONFIG_I2C_MULTI_BUS) || \
CONFIG_IS_ENABLED(DM_I2C)
static int do_i2c_bus_num(struct cmd_tbl *cmdtp, int flag, int argc,
char *const argv[])
@@ -1834,7 +1834,7 @@ static int do_i2c_bus_num(struct cmd_tbl *cmdtp, int flag, int argc,
printf("Current bus is %d\n", bus_no);
} else {
bus_no = simple_strtoul(argv[1], NULL, 10);
-#if defined(CONFIG_SYS_I2C)
+#if defined(CONFIG_SYS_I2C_LEGACY)
if (bus_no >= CONFIG_SYS_NUM_I2C_BUSES) {
printf("Invalid bus %d\n", bus_no);
return -1;
@@ -1852,7 +1852,7 @@ static int do_i2c_bus_num(struct cmd_tbl *cmdtp, int flag, int argc,
return ret ? CMD_RET_FAILURE : 0;
}
-#endif /* defined(CONFIG_SYS_I2C) */
+#endif /* defined(CONFIG_SYS_I2C_LEGACY) */
/**
* do_i2c_bus_speed() - Handle the "i2c speed" command-line command
@@ -1951,7 +1951,7 @@ static int do_i2c_reset(struct cmd_tbl *cmdtp, int flag, int argc,
printf("Error: Not supported by the driver\n");
return CMD_RET_FAILURE;
}
-#elif defined(CONFIG_SYS_I2C)
+#elif defined(CONFIG_SYS_I2C_LEGACY)
i2c_init(I2C_ADAP->speed, I2C_ADAP->slaveaddr);
#else
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
@@ -1960,11 +1960,11 @@ static int do_i2c_reset(struct cmd_tbl *cmdtp, int flag, int argc,
}
static struct cmd_tbl cmd_i2c_sub[] = {
-#if defined(CONFIG_SYS_I2C) || CONFIG_IS_ENABLED(DM_I2C)
+#if defined(CONFIG_SYS_I2C_LEGACY) || CONFIG_IS_ENABLED(DM_I2C)
U_BOOT_CMD_MKENT(bus, 1, 1, do_i2c_show_bus, "", ""),
#endif
U_BOOT_CMD_MKENT(crc32, 3, 1, do_i2c_crc, "", ""),
-#if defined(CONFIG_SYS_I2C) || \
+#if defined(CONFIG_SYS_I2C_LEGACY) || \
defined(CONFIG_I2C_MULTI_BUS) || CONFIG_IS_ENABLED(DM_I2C)
U_BOOT_CMD_MKENT(dev, 1, 1, do_i2c_bus_num, "", ""),
#endif /* CONFIG_I2C_MULTI_BUS */
@@ -2036,12 +2036,12 @@ static int do_i2c(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
/***************************************************/
#ifdef CONFIG_SYS_LONGHELP
static char i2c_help_text[] =
-#if defined(CONFIG_SYS_I2C) || CONFIG_IS_ENABLED(DM_I2C)
+#if defined(CONFIG_SYS_I2C_LEGACY) || CONFIG_IS_ENABLED(DM_I2C)
"bus [muxtype:muxaddr:muxchannel] - show I2C bus info\n"
"i2c " /* That's the prefix for the crc32 command below. */
#endif
"crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
-#if defined(CONFIG_SYS_I2C) || \
+#if defined(CONFIG_SYS_I2C_LEGACY) || \
defined(CONFIG_I2C_MULTI_BUS) || CONFIG_IS_ENABLED(DM_I2C)
"i2c dev [dev] - show or set current I2C bus\n"
#endif /* CONFIG_I2C_MULTI_BUS */