diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/sunxi/Kconfig | 35 | ||||
| -rw-r--r-- | board/sunxi/MAINTAINERS | 5 | ||||
| -rw-r--r-- | board/sunxi/board.c | 6 |
3 files changed, 38 insertions, 8 deletions
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 37b4252..3e0e262 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -27,6 +27,17 @@ config SPL_POWER_SUPPORT config SPL_SERIAL_SUPPORT default y +config SUNXI_HIGH_SRAM + bool + default n + ---help--- + Older Allwinner SoCs have their mask boot ROM mapped just below 4GB, + with the first SRAM region being located at address 0. + Some newer SoCs map the boot ROM at address 0 instead and move the + SRAM to 64KB, just behind the mask ROM. + Chips using the latter setup are supposed to select this option to + adjust the addresses accordingly. + # Note only one of these may be selected at a time! But hidden choices are # not supported by Kconfig config SUNXI_GEN_SUN4I @@ -43,6 +54,11 @@ config SUNXI_GEN_SUN6I watchdog, etc. +config MACH_SUNXI_H3_H5 + bool + select SUNXI_GEN_SUN6I + select SUPPORT_SPL + choice prompt "Sunxi SoC Variant" optional @@ -50,12 +66,14 @@ choice config MACH_SUN4I bool "sun4i (Allwinner A10)" select CPU_V7 + select ARM_CORTEX_CPU_IS_UP select SUNXI_GEN_SUN4I select SUPPORT_SPL config MACH_SUN5I bool "sun5i (Allwinner A13)" select CPU_V7 + select ARM_CORTEX_CPU_IS_UP select SUNXI_GEN_SUN4I select SUPPORT_SPL @@ -111,13 +129,13 @@ config MACH_SUN8I_H3 select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select ARCH_SUPPORT_PSCI - select SUNXI_GEN_SUN6I - select SUPPORT_SPL + select MACH_SUNXI_H3_H5 select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT config MACH_SUN9I bool "sun9i (Allwinner A80)" select CPU_V7 + select SUNXI_HIGH_SRAM select SUNXI_GEN_SUN6I select SUPPORT_SPL @@ -125,14 +143,21 @@ config MACH_SUN50I bool "sun50i (Allwinner A64)" select ARM64 select SUNXI_GEN_SUN6I + select SUNXI_HIGH_SRAM select SUPPORT_SPL +config MACH_SUN50I_H5 + bool "sun50i (Allwinner H5)" + select ARM64 + select MACH_SUNXI_H3_H5 + select SUNXI_HIGH_SRAM + endchoice # The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33" config MACH_SUN8I bool - default y if MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_H3 || MACH_SUN8I_A83T + default y if MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUNXI_H3_H5 || MACH_SUN8I_A83T config RESERVE_ALLWINNER_BOOT0_HEADER bool "reserve space for Allwinner boot0 header" @@ -320,7 +345,7 @@ config OLD_SUNXI_KERNEL_COMPAT config MMC0_CD_PIN string "Card detect pin for mmc0" - default "PF6" if MACH_SUN8I_A83T || MACH_SUN8I_H3 || MACH_SUN50I + default "PF6" if MACH_SUN8I_A83T || MACH_SUNXI_H3_H5 || MACH_SUN50I default "" ---help--- Set the card detect pin for mmc0, leave empty to not use cd. This @@ -485,7 +510,7 @@ config AXP_GPIO config VIDEO bool "Enable graphical uboot console on HDMI, LCD or VGA" - depends on !MACH_SUN8I_A83T && !MACH_SUN8I_H3 && !MACH_SUN9I && !MACH_SUN50I + depends on !MACH_SUN8I_A83T && !MACH_SUNXI_H3_H5 && !MACH_SUN9I && !MACH_SUN50I default y ---help--- Say Y here to add support for using a cfb console on the HDMI, LCD diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 2321b8b..3f21129 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -242,6 +242,11 @@ M: Icenowy Zheng <icenowy@aosc.xyz> S: Maintained F: configs/orangepi_zero_defconfig +ORANGEPI PC 2 BOARD +M: Andre Przywara <andre.przywara@arm.com> +S: Maintained +F: configs/orangepi_pc2_defconfig + R16 EVB PARROT BOARD M: Quentin Schulz <quentin.schulz@free-electrons.com> S: Maintained diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 5365638..b966012 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -100,14 +100,14 @@ int board_init(void) * we avoid the risk of writing to it. */ asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r"(freq)); - if (freq != CONFIG_TIMER_CLK_FREQ) { + if (freq != COUNTER_FREQUENCY) { debug("arch timer frequency is %d Hz, should be %d, fixing ...\n", - freq, CONFIG_TIMER_CLK_FREQ); + freq, COUNTER_FREQUENCY); #ifdef CONFIG_NON_SECURE printf("arch timer frequency is wrong, but cannot adjust it\n"); #else asm volatile("mcr p15, 0, %0, c14, c0, 0" - : : "r"(CONFIG_TIMER_CLK_FREQ)); + : : "r"(COUNTER_FREQUENCY)); #endif } } |