aboutsummaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/intel/galileo/galileo.c56
1 files changed, 56 insertions, 0 deletions
diff --git a/board/intel/galileo/galileo.c b/board/intel/galileo/galileo.c
index 746ab27..c1087ac 100644
--- a/board/intel/galileo/galileo.c
+++ b/board/intel/galileo/galileo.c
@@ -5,12 +5,68 @@
*/
#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/device.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/quark.h>
int board_early_init_f(void)
{
return 0;
}
+/*
+ * Intel Galileo gen2 board uses GPIO Resume Well bank pin0 as the PERST# pin.
+ *
+ * We cannot use any public GPIO APIs in <asm-generic/gpio.h> to control this
+ * pin, as these APIs will eventually call into gpio_ich6_ofdata_to_platdata()
+ * in the Intel ICH6 GPIO driver where it calls PCI configuration space access
+ * APIs which will trigger PCI enumeration process.
+ *
+ * Check <asm/arch-quark/quark.h> for more details.
+ */
+void board_assert_perst(void)
+{
+ u32 base, port, val;
+
+ /* retrieve the GPIO IO base */
+ qrk_pci_read_config_dword(QUARK_LEGACY_BRIDGE, PCI_CFG_GPIOBASE, &base);
+ base = (base & 0xffff) & ~0x7f;
+
+ /* enable the pin */
+ port = base + 0x20;
+ val = inl(port);
+ val |= (1 << 0);
+ outl(val, port);
+
+ /* configure the pin as output */
+ port = base + 0x24;
+ val = inl(port);
+ val &= ~(1 << 0);
+ outl(val, port);
+
+ /* pull it down (assert) */
+ port = base + 0x28;
+ val = inl(port);
+ val &= ~(1 << 0);
+ outl(val, port);
+}
+
+void board_deassert_perst(void)
+{
+ u32 base, port, val;
+
+ /* retrieve the GPIO IO base */
+ qrk_pci_read_config_dword(QUARK_LEGACY_BRIDGE, PCI_CFG_GPIOBASE, &base);
+ base = (base & 0xffff) & ~0x7f;
+
+ /* pull it up (de-assert) */
+ port = base + 0x28;
+ val = inl(port);
+ val |= (1 << 0);
+ outl(val, port);
+}
+
void setup_pch_gpios(u16 gpiobase, const struct pch_gpio_map *gpio)
{
return;