diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/sorcery/sorcery.c | 2 | ||||
| -rw-r--r-- | board/voiceblue/Makefile | 64 | ||||
| -rw-r--r-- | board/voiceblue/config.mk | 16 | ||||
| -rw-r--r-- | board/voiceblue/eeprom.c | 140 | ||||
| -rw-r--r-- | board/voiceblue/setup.S | 280 | ||||
| -rw-r--r-- | board/voiceblue/u-boot.lds | 55 | ||||
| -rw-r--r-- | board/voiceblue/voiceblue.c | 152 |
7 files changed, 708 insertions, 1 deletions
diff --git a/board/sorcery/sorcery.c b/board/sorcery/sorcery.c index 2f53fac..a7ef85c 100644 --- a/board/sorcery/sorcery.c +++ b/board/sorcery/sorcery.c @@ -31,7 +31,7 @@ long int initdram (int board_type) ulong size; size = dramSetup (); - + return get_ram_size((ulong *)CFG_SDRAM_BASE, size); } diff --git a/board/voiceblue/Makefile b/board/voiceblue/Makefile new file mode 100644 index 0000000..44be6ca --- /dev/null +++ b/board/voiceblue/Makefile @@ -0,0 +1,64 @@ +# (C) Copyright 2000-2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de +# +# (C) Copyright 2005 +# Ladislav Michl, 2N Telekomunikace, michl@2n.cz +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := voiceblue.o +SOBJS := setup.o + +gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`) + +LOAD_ADDR = 0x10400000 + +all: $(LIB) eeprom.srec eeprom.bin + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +eeprom.srec: eeprom.o + $(LD) -g -Ttext $(LOAD_ADDR) -o $(<:.o=) -e $(<:.o=) $^ \ + -L../../examples -lstubs \ + -L../../lib_generic -lgeneric \ + -L$(gcclibdir) -lgcc + $(OBJCOPY) -O srec $(<:.o=) $@ + +eeprom.bin: eeprom.srec + $(OBJCOPY) -O binary $< $@ 2>/dev/null + +clean: + rm -f $(SOBJS) $(OBJS) eeprom eeprom.srec eeprom.bin + +distclean: clean + rm -f $(LIB) core config.tmp *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/board/voiceblue/config.mk b/board/voiceblue/config.mk new file mode 100644 index 0000000..c73cd27 --- /dev/null +++ b/board/voiceblue/config.mk @@ -0,0 +1,16 @@ +# +# Linux-Kernel is expected to be at 1000'8000, +# entry 1000'8000 (mem base + reserved) +# + +sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp + +ifeq ($(VOICEBLUE_SMALL_FLASH),y) +# We load ourself to internal SRAM at 2001'2000 +# Check map file when changing TEXT_BASE. +# Everything has fit into 192kB internal SRAM! +TEXT_BASE = 0x20012000 +else +# Running in SDRAM... +TEXT_BASE = 0x13000000 +endif diff --git a/board/voiceblue/eeprom.c b/board/voiceblue/eeprom.c new file mode 100644 index 0000000..6383a02 --- /dev/null +++ b/board/voiceblue/eeprom.c @@ -0,0 +1,140 @@ +/* + * (C) Copyright 2005 + * Ladislav Michl, 2N Telekomunikace, michl@2n.cz + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Some code shamelessly stolen back from Robin Getz. + */ + +#define DEBUG + +#include <common.h> +#include <exports.h> +#include "../drivers/smc91111.h" + +#define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE + +static int verify_macaddr(char *); +static int set_mac(char *); + +int eeprom(int argc, char *argv[]) +{ + app_startup(argv); + if (get_version() != XF_VERSION) { + printf("Wrong XF_VERSION.\n"); + printf("Application expects ABI version %d\n", XF_VERSION); + printf("Actual U-Boot ABI version %d\n", (int)get_version()); + return 1; + } + + if ((SMC_inw (BANK_SELECT) & 0xFF00) != 0x3300) { + printf("SMSC91111 not found.\n"); + return 2; + } + + if (argc != 2) { + printf("VoiceBlue EEPROM writer\n"); + printf("Built: %s at %s\n", __DATE__ , __TIME__ ); + printf("Usage:\n\t<mac_address>"); + return 3; + } + + set_mac(argv[1]); + if (verify_macaddr(argv[1])) { + printf("*** ERROR ***\n"); + return 4; + } + + return 0; +} + +static u16 read_eeprom_reg(u16 reg) +{ + int timeout; + + SMC_SELECT_BANK(2); + SMC_outw(reg, PTR_REG); + + SMC_SELECT_BANK(1); + SMC_outw(SMC_inw (CTL_REG) | CTL_EEPROM_SELECT | CTL_RELOAD, + CTL_REG); + timeout = 100; + while((SMC_inw (CTL_REG) & CTL_RELOAD) && --timeout) + udelay(100); + if (timeout == 0) { + printf("Timeout Reading EEPROM register %02x\n", reg); + return 0; + } + + return SMC_inw (GP_REG); +} + +static int write_eeprom_reg(u16 value, u16 reg) +{ + int timeout; + + SMC_SELECT_BANK(2); + SMC_outw(reg, PTR_REG); + + SMC_SELECT_BANK(1); + SMC_outw(value, GP_REG); + SMC_outw(SMC_inw (CTL_REG) | CTL_EEPROM_SELECT | CTL_STORE, CTL_REG); + timeout = 100; + while ((SMC_inw(CTL_REG) & CTL_STORE) && --timeout) + udelay (100); + if (timeout == 0) { + printf("Timeout Writing EEPROM register %02x\n", reg); + return 0; + } + + return 1; +} + +static int verify_macaddr(char *s) +{ + u16 reg; + int i, err = 0; + + printf("Verifying MAC Address: "); + err = i = 0; + for (i = 0; i < 3; i++) { + reg = read_eeprom_reg(0x20 + i); + printf("%02x:%02x%c", reg & 0xff, reg >> 8, i != 2 ? ':' : '\n'); + err |= reg != ((u16 *)s)[i]; + } + + return err ? 0 : 1; +} + +static int set_mac(char *s) +{ + int i; + char *e, eaddr[6]; + + /* turn string into mac value */ + for (i = 0; i < 6; i++) { + eaddr[i] = simple_strtoul(s, &e, 16); + s = (*e) ? e+1 : e; + } + + for (i = 0; i < 3; i++) + write_eeprom_reg(*(((u16 *)eaddr) + i), 0x20 + i); + + return 0; +} diff --git a/board/voiceblue/setup.S b/board/voiceblue/setup.S new file mode 100644 index 0000000..4a110e8 --- /dev/null +++ b/board/voiceblue/setup.S @@ -0,0 +1,280 @@ +/* + * Board specific setup info + * + * (C) Copyright 2004 Ales Jindra <jindra@2n.cz> + * (C) Copyright 2005 Ladislav Michl <michl@2n.cz> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> + +_TEXT_BASE: + .word TEXT_BASE /* SDRAM load addr from config.mk */ + +OMAP5910_LPG1_BASE: .word 0xfffbd000 +OMAP5910_TIPB_SWITCHES_BASE: .word 0xfffbc800 +OMAP5910_MPU_TC_BASE: .word 0xfffecc00 +OMAP5910_MPU_CLKM_BASE: .word 0xfffece00 +OMAP5910_ULPD_PWR_MNG_BASE: .word 0xfffe0800 +OMAP5910_DPLL1_BASE: .word 0xfffecf00 +OMAP5910_GPIO_BASE: .word 0xfffce000 +OMAP5910_MPU_WD_TIMER_BASE: .word 0xfffec800 +OMAP5910_MPUI_BASE: .word 0xfffec900 + +_OMAP5910_ARM_CKCTL: .word OMAP5910_ARM_CKCTL +_OMAP5910_ARM_EN_CLK: .word OMAP5910_ARM_EN_CLK + +OMAP5910_MPUI_CTRL: .word 0x0000ff1b + +VAL_EMIFS_CS0_CONFIG: .word 0x00009090 +VAL_EMIFS_CS1_CONFIG: .word 0x00003031 +VAL_EMIFS_CS2_CONFIG: .word 0x00003031 +VAL_EMIFS_CS3_CONFIG: .word 0x0000c0c0 +VAL_EMIFS_DYN_WAIT: .word 0x00000000 +/* autorefresh counter 0x246 ((64000000/13.4)-400)/8192) */ + /* SLRF SD_RET ARE SDRAM_TYPE ARCV SDRAM_FREQUENCY PWD CLK */ +VAL_EMIFF_SDRAM_CONFIG: .word ((0 << 0) | (0 << 1) | (3 << 2) | (0xd << 4) | (0x246 << 8) | (0 << 24) | (0 << 26) | (0 << 27)) +VAL_EMIFF_SDRAM_CONFIG2: .word 0x00000003 +VAL_EMIFF_MRS: .word 0x00000037 + +/* + * GPIO04 - D4 (Onboard LED) + * GPIO07 - LAN91C111 reset + */ +GPIO_DIRECTION: + .word 0x0000ff6f +/* + * Disable everything, but D4 LED (connected through invertor) + */ +GPIO_OUTPUT: + .word 0x00000010 + +MUX_CONFIG_BASE: + .word 0xfffe1000 + +MUX_CONFIG_VALUES: + .align 4 + .word 0x00000000 @ FUNC_MUX_CTRL_0 + .word 0x00000000 @ FUNC_MUX_CTRL_1 + .word 0x00000000 @ FUNC_MUX_CTRL_2 + .word 0x00000000 @ FUNC_MUX_CTRL_3 + .word 0x00000000 @ FUNC_MUX_CTRL_4 + .word 0x12082480 @ FUNC_MUX_CTRL_5 + .word 0x00000004 @ FUNC_MUX_CTRL_6 + .word 0x00000003 @ FUNC_MUX_CTRL_7 + .word 0x10001200 @ FUNC_MUX_CTRL_8 + .word 0x01201012 @ FUNC_MUX_CTRL_9 + .word 0x02081248 @ FUNC_MUX_CTRL_A + .word 0x00001248 @ FUNC_MUX_CTRL_B + .word 0x12240000 @ FUNC_MUX_CTRL_C + .word 0x00002000 @ FUNC_MUX_CTRL_D + .word 0x00000000 @ PULL_DWN_CTRL_0 + .word 0x0000085f @ PULL_DWN_CTRL_1 + .word 0x01001000 @ PULL_DWN_CTRL_2 + .word 0x00000000 @ PULL_DWN_CTRL_3 + .word 0x00000000 @ GATE_INH_CTRL_0 + .word 0x00000000 @ VOLTAGE_CTRL_0 + .word 0x00000000 @ TEST_DBG_CTRL_0 + .word 0x00000006 @ MOD_CONF_CTRL_0 + .word 0x0000eaef @ COMP_MODE_CTRL_0 + +MUX_CONFIG_OFFSETS: + .align 1 + .byte 0x00 @ FUNC_MUX_CTRL_0 + .byte 0x04 @ FUNC_MUX_CTRL_1 + .byte 0x08 @ FUNC_MUX_CTRL_2 + .byte 0x10 @ FUNC_MUX_CTRL_3 + .byte 0x14 @ FUNC_MUX_CTRL_4 + .byte 0x18 @ FUNC_MUX_CTRL_5 + .byte 0x1c @ FUNC_MUX_CTRL_6 + .byte 0x20 @ FUNC_MUX_CTRL_7 + .byte 0x24 @ FUNC_MUX_CTRL_8 + .byte 0x28 @ FUNC_MUX_CTRL_9 + .byte 0x2c @ FUNC_MUX_CTRL_A + .byte 0x30 @ FUNC_MUX_CTRL_B + .byte 0x34 @ FUNC_MUX_CTRL_C + .byte 0x38 @ FUNC_MUX_CTRL_D + .byte 0x40 @ PULL_DWN_CTRL_0 + .byte 0x44 @ PULL_DWN_CTRL_1 + .byte 0x48 @ PULL_DWN_CTRL_2 + .byte 0x4c @ PULL_DWN_CTRL_3 + .byte 0x50 @ GATE_INH_CTRL_0 + .byte 0x60 @ VOLTAGE_CTRL_0 + .byte 0x70 @ TEST_DBG_CTRL_0 + .byte 0x80 @ MOD_CONF_CTRL_0 + .byte 0x0c @ COMP_MODE_CTRL_0 + .byte 0xff + +.globl platformsetup +platformsetup: + /* Improve performance a bit... */ + mrc p15, 0, r1, c0, c0, 0 @ read C15 ID register + mrc p15, 0, r1, c0, c0, 1 @ read C15 Cache information register + mrc p15, 0, r1, c1, c0, 0 @ read C15 Control register + orr r1, r1, #0x1000 @ enable I-cache, map interrupt vector 0xffff0000 + mcr p15, 0, r1, c1, c0, 0 @ write C15 Control register + mov r1, #0x00 + mcr p15, 0, r1, c7, c5, 0 @ Flush I-cache + nop + nop + nop + nop + + /* Setup clocking mode */ + ldr r0, OMAP5910_MPU_CLKM_BASE @ prepare base of CLOCK unit + ldrh r1, [r0, #0x18] @ get reset status + bic r1, r1, #(7 << 11) @ clear clock select + orr r1, r1, #(2 << 11) @ set synchronous scalable + mov r2, #0 @ set wait counter to 100 clock cycles + +icache_loop: + cmp r2, #0x01 + streqh r1, [r0, #0x18] + add r2, r2, #0x01 + cmp r2, #0x10 + bne icache_loop + nop + + /* Setup clock divisors */ + ldr r0, OMAP5910_MPU_CLKM_BASE @ base of CLOCK unit + ldr r1, _OMAP5910_ARM_CKCTL + orr r1, r1, #0x2000 @ enable DSP clock + strh r1, [r0, #0x00] @ setup clock divisors + + /* Setup DPLL to generate requested freq */ + ldr r0, OMAP5910_DPLL1_BASE @ base of DPLL1 register + mov r1, #0x0010 @ set PLL_ENABLE + orr r1, r1, #0x2000 @ set IOB to new locking + orr r1, r1, #(OMAP5910_DPLL_MUL << 7) @ setup multiplier CLKREF + orr r1, r1, #(OMAP5910_DPLL_DIV << 5) @ setup divider CLKREF + strh r1, [r0] @ write + +locking: + ldrh r1, [r0] @ get DPLL value + tst r1, #0x01 + beq locking @ while LOCK not set + + /* Enable clock */ + ldr r0, OMAP5910_MPU_CLKM_BASE @ base of CLOCK unit + mov r1, #(1 << 10) @ disable idle mode do not check + @ nWAKEUP pin, other remain active + strh r1, [r0, #0x04] + ldr r1, _OMAP5910_ARM_EN_CLK + strh r1, [r0, #0x08] + mov r1, #0x003f @ FLASH.RP not enabled in idle and + @ max delayed ( 32 x CLKIN ) + strh r1, [r0, #0x0c] + + /* Configure 5910 pins functions to match our board. */ + ldr r0, MUX_CONFIG_BASE + adr r1, MUX_CONFIG_VALUES + adr r2, MUX_CONFIG_OFFSETS +next_mux_cfg: + ldrb r3, [r2], #1 + ldr r4, [r1], #4 + cmp r3, #0xff + strne r4, [r0, r3] + bne next_mux_cfg + + /* Configure GPIO pins (also enables onboard LED) */ + ldr r0, OMAP5910_GPIO_BASE + ldr r1, GPIO_OUTPUT + strh r1, [r0, #0x04] + ldr r1, GPIO_DIRECTION + strh r1, [r0, #0x08] + + /* EnablePeripherals */ + ldr r0, OMAP5910_MPU_CLKM_BASE @ CLOCK unit + mov r1, #0x0001 @ Peripheral enable + strh r1, [r0, #0x14] + + /* Program LED Pulse Generator */ + ldr r0, OMAP5910_LPG1_BASE @ 1st LED Pulse Generator + mov r1, #0x7F @ Set obscure frequency in + strb r1, [r0, #0x00] @ LCR + mov r1, #0x01 @ Enable clock (CLK_EN) in + strb r1, [r0, #0x04] @ PMR + + /* TIPB Lock UART1 */ + ldr r0, OMAP5910_TIPB_SWITCHES_BASE @ prepare base of TIPB switches + mov r1, #1 @ ARM allocated + strh r1, [r0,#0x04] @ clear IRQ line and status bits + strh r1, [r0,#0x00] + ldrh r1, [r0,#0x04] + + /* Disable watchdog */ + ldr r0, OMAP5910_MPU_WD_TIMER_BASE + mov r1, #0xf5 + strh r1, [r0, #0x8] + mov r1, #0xa0 + strh r1, [r0, #0x8] + + /* Enable MCLK */ + ldr r0, OMAP5910_ULPD_PWR_MNG_BASE + mov r1, #0x6 + strh r1, [r0, #0x34] + strh r1, [r0, #0x34] + + /* Setup clock divisors */ + ldr r0, OMAP5910_ULPD_PWR_MNG_BASE @ base of ULDPL DPLL1 register + + mov r1, #0x0010 @ set PLL_ENABLE + orr r1, r1, #0x2000 @ set IOB to new locking + strh r1, [r0] @ write + +ulocking: + ldrh r1, [r0] @ get DPLL value + tst r1, #1 + beq ulocking @ while LOCK not set + + /* EMIF init */ + ldr r0, OMAP5910_MPU_TC_BASE + ldrh r1, [r0, #0x0c] @ EMIFS_CONFIG_REG + bic r1, r1, #0x0c @ pwr down disabled, flash WP + orr r1, r1, #0x01 + str r1, [r0, #0x0c] + + ldr r1, VAL_EMIFS_CS0_CONFIG + str r1, [r0, #0x10] @ EMIFS_CS0_CONFIG + ldr r1, VAL_EMIFS_CS1_CONFIG + str r1, [r0, #0x14] @ EMIFS_CS1_CONFIG + ldr r1, VAL_EMIFS_CS2_CONFIG + str r1, [r0, #0x18] @ EMIFS_CS2_CONFIG + ldr r1, VAL_EMIFS_CS3_CONFIG + str r1, [r0, #0x1c] @ EMIFS_CS3_CONFIG + ldr r1, VAL_EMIFS_DYN_WAIT + str r1, [r0, #0x40] @ EMIFS_CFG_DYN_WAIT + + /* Setup SDRAM */ + ldr r1, VAL_EMIFF_SDRAM_CONFIG + str r1, [r0, #0x20] @ EMIFF_SDRAM_CONFIG + ldr r1, VAL_EMIFF_SDRAM_CONFIG2 + str r1, [r0, #0x3c] @ EMIFF_SDRAM_CONFIG2 + ldr r1, VAL_EMIFF_MRS + str r1, [r0, #0x24] @ EMIFF_MRS + /* SDRAM needs 100us to stabilize */ + mov r0, #0x4000 +sdelay: + subs r0, r0, #0x1 + bne sdelay + + /* back to arch calling code */ + mov pc, lr +.end diff --git a/board/voiceblue/u-boot.lds b/board/voiceblue/u-boot.lds new file mode 100644 index 0000000..8317f72 --- /dev/null +++ b/board/voiceblue/u-boot.lds @@ -0,0 +1,55 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm925t/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/board/voiceblue/voiceblue.c b/board/voiceblue/voiceblue.c new file mode 100644 index 0000000..2501622 --- /dev/null +++ b/board/voiceblue/voiceblue.c @@ -0,0 +1,152 @@ +/* + * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +int board_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + unsigned int val; + + *((volatile unsigned char *) VOICEBLUE_LED_REG) = 0xaa; + + /* arch number of VoiceBlue board */ + /* TODO: use define from asm/mach-types.h */ + gd->bd->bi_arch_number = 218; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = 0x10000100; + + return 0; +} + +int dram_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + *((volatile unsigned short *) VOICEBLUE_LED_REG) = 0xff; + + /* Take the Ethernet controller out of reset and wait + * for the EEPROM load to complete. */ + *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) |= 0x80; + udelay(10); /* doesn't work before interrupt_init call */ + *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) &= ~0x80; + udelay(500); + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return 0; +} + +#ifndef VOICEBLUE_SMALL_FLASH + +#include <jffs2/jffs2.h> + +extern flash_info_t flash_info[]; +static struct part_info partinfo; +static int current_part = -1; + +/* Partition table (Linux MTD see it this way) + * + * 0 - U-Boot + * 1 - env + * 2 - redundant env + * 3 - data1 (jffs2) + * 4 - data2 (jffs2) + */ + +static struct { + ulong offset; + ulong size; +} part[5]; + +static void partition_flash(flash_info_t *info) +{ + char mtdparts[128]; + int i, n, size, psize; + const ulong plen[3] = { CFG_MONITOR_LEN, CFG_ENV_SIZE, CFG_ENV_SIZE }; + + size = n = 0; + for (i = 0; i < 4; i++) { + part[i].offset = info->start[n]; + psize = i < 3 ? plen[i] : (info->size - size) / 2; + while (part[i].size < psize) { + if (++n > info->sector_count) { + printf("Partitioning error. System halted.\n"); + while (1) ; + } + part[i].size += info->start[n] - info->start[n - 1]; + } + size += part[i].size; + } + part[4].offset = info->start[n]; + part[4].size = info->start[info->sector_count - 1] - info->start[n]; + + sprintf(mtdparts, "omapflash.0:" + "%dk(U-Boot)ro,%dk(env),%dk(r_env),%dk(data1),-(data2)", + part[0].size >> 10, part[1].size >> 10, + part[2].size >> 10, part[3].size >> 10); + setenv ("mtdparts", mtdparts); +} + +struct part_info* jffs2_part_info(int part_num) +{ + void *jffs2_priv_saved = partinfo.jffs2_priv; + + if (part_num != 3 && part_num != 4) + return NULL; + + if (current_part != part_num) { + memset(&partinfo, 0, sizeof(partinfo)); + current_part = part_num; + partinfo.offset = (char*) part[part_num].offset; + partinfo.size = part[part_num].size; + partinfo.usr_priv = ¤t_part; + partinfo.jffs2_priv = jffs2_priv_saved; + } + + return &partinfo; +} + +#endif + +int misc_init_r(void) +{ + *((volatile unsigned short *) VOICEBLUE_LED_REG) = 0x55; + +#ifndef VOICEBLUE_SMALL_FLASH + if (flash_info[0].flash_id == FLASH_UNKNOWN) { + printf("Unknown flash. System halted.\n"); + while (1) ; + } + partition_flash(&flash_info[0]); +#endif + + return 0; +} + +int board_late_init(void) +{ + *((volatile unsigned char *) VOICEBLUE_LED_REG) = 0x00; + + return 0; +} |