diff options
Diffstat (limited to 'board/toradex/colibri_vf')
| -rw-r--r-- | board/toradex/colibri_vf/colibri_vf.c | 82 |
1 files changed, 1 insertions, 81 deletions
diff --git a/board/toradex/colibri_vf/colibri_vf.c b/board/toradex/colibri_vf/colibri_vf.c index 8e0dea2..c4d0553 100644 --- a/board/toradex/colibri_vf/colibri_vf.c +++ b/board/toradex/colibri_vf/colibri_vf.c @@ -16,23 +16,16 @@ #include <asm/gpio.h> #include <asm/io.h> #include <fdt_support.h> -#include <fsl_esdhc.h> #include <fsl_dcu_fb.h> #include <g_dnl.h> -#include <i2c.h> #include <jffs2/load_kernel.h> -#include <miiphy.h> -#include <mmc.h> #include <mtd_node.h> -#include <netdev.h> #include <usb.h> #include "../common/tdx-common.h" DECLARE_GLOBAL_DATA_PTR; -#define USB_PEN_GPIO 83 -#define USB_CDET_GPIO 102 #define PTC0_GPIO_45 45 static struct ddrmc_cr_setting colibri_vf_cr_settings[] = { @@ -239,25 +232,6 @@ static void setup_tcon(void) } #endif -#ifdef CONFIG_FSL_ESDHC -struct fsl_esdhc_cfg esdhc_cfg[1] = { - {ESDHC1_BASE_ADDR}, -}; - -int board_mmc_getcd(struct mmc *mmc) -{ - /* eSDHC1 is always present */ - return 1; -} - -int board_mmc_init(bd_t *bis) -{ - esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); - - return fsl_esdhc_initialize(bis, &esdhc_cfg[0]); -} -#endif - static inline int is_colibri_vf61(void) { struct mscm *mscm = (struct mscm *)MSCM_BASE_ADDR; @@ -290,7 +264,7 @@ static void clock_init(void) CCM_CCGR3_ANADIG_CTRL_MASK | CCM_CCGR3_SCSC_CTRL_MASK); clrsetbits_le32(&ccm->ccgr4, CCM_REG_CTRL_MASK, CCM_CCGR4_WKUP_CTRL_MASK | CCM_CCGR4_CCM_CTRL_MASK | - CCM_CCGR4_GPC_CTRL_MASK | CCM_CCGR4_I2C0_CTRL_MASK); + CCM_CCGR4_GPC_CTRL_MASK); clrsetbits_le32(&ccm->ccgr6, CCM_REG_CTRL_MASK, CCM_CCGR6_OCOTP_CTRL_MASK | CCM_CCGR6_DDRMC_CTRL_MASK); clrsetbits_le32(&ccm->ccgr7, CCM_REG_CTRL_MASK, @@ -379,14 +353,6 @@ static void mscm_init(void) writew(MSCM_IRSPRC_CP0_EN, &mscmir->irsprc[i]); } -int board_phy_config(struct phy_device *phydev) -{ - if (phydev->drv->config) - phydev->drv->config(phydev); - - return 0; -} - int board_early_init_f(void) { clock_init(); @@ -433,13 +399,8 @@ int board_init(void) * so we must use the external oscillator in order * to maintain correct time in the hwclock */ - setbits_le32(&scsc->sosc_ctr, SCSC_SOSC_CTR_SOSC_EN); -#ifdef CONFIG_USB_EHCI_VF - gpio_request(USB_CDET_GPIO, "usb-cdet-gpio"); -#endif - return 0; } @@ -476,47 +437,6 @@ int ft_board_setup(void *blob, bd_t *bd) } #endif -#ifdef CONFIG_USB_EHCI_VF -int board_ehci_hcd_init(int port) -{ - switch (port) { - case 0: - /* USBC does not have PEN, also configured as USB client only */ - break; - case 1: - gpio_request(USB_PEN_GPIO, "usb-pen-gpio"); - gpio_direction_output(USB_PEN_GPIO, 0); - break; - } - return 0; -} - -int board_usb_phy_mode(int port) -{ - switch (port) { - case 0: - /* - * Port 0 is used only in client mode on Colibri Vybrid modules - * Check for state of USB client gpio pin and accordingly return - * USB_INIT_DEVICE or USB_INIT_HOST. - */ - if (gpio_get_value(USB_CDET_GPIO)) - return USB_INIT_DEVICE; - else - return USB_INIT_HOST; - case 1: - /* Port 1 is used only in host mode on Colibri Vybrid modules */ - return USB_INIT_HOST; - default: - /* - * There are only two USB controllers on Vybrid. Ideally we will - * not reach here. However return USB_INIT_HOST if we do. - */ - return USB_INIT_HOST; - } -} -#endif - /* * Backlight off before OS handover */ |