diff options
Diffstat (limited to 'board/ti')
| -rw-r--r-- | board/ti/am335x/board.c | 1 | ||||
| -rw-r--r-- | board/ti/am57xx/board.c | 9 | ||||
| -rw-r--r-- | board/ti/am65x/evm.c | 6 | ||||
| -rw-r--r-- | board/ti/common/board_detect.c | 14 | ||||
| -rw-r--r-- | board/ti/omap5_uevm/evm.c | 78 | ||||
| -rw-r--r-- | board/ti/panda/panda.c | 50 | ||||
| -rw-r--r-- | board/ti/sdp4430/sdp.c | 12 |
7 files changed, 50 insertions, 120 deletions
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index 4199bee..123ccaa 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -912,7 +912,6 @@ struct cpsw_platform_data am335_eth_data = { .slaves = 2, .slave_data = slave_data, .ale_entries = 1024, - .bd_ram_ofs = 0x2000, .mac_control = 0x20, .active_slave = 0, .mdio_base = 0x4a101000, diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c index 8720eb8..511858a 100644 --- a/board/ti/am57xx/board.c +++ b/board/ti/am57xx/board.c @@ -61,6 +61,10 @@ static int board_bootmode_has_emmc(void); #define board_is_am571x_idk() board_ti_is("AM571IDK") #define board_is_bbai() board_ti_is("BBONE-AI") +#define board_is_ti_idk() board_is_am574x_idk() || \ + board_is_am572x_idk() || \ + board_is_am571x_idk() + #ifdef CONFIG_DRIVER_TI_CPSW #include <cpsw.h> #endif @@ -68,8 +72,7 @@ static int board_bootmode_has_emmc(void); DECLARE_GLOBAL_DATA_PTR; #define GPIO_ETH_LCD GPIO_TO_PIN(2, 22) -/* GPIO 7_11 */ -#define GPIO_DDR_VTT_EN 203 +#define GPIO_DDR_VTT_EN GPIO_TO_PIN(7, 11) /* Touch screen controller to identify the LCD */ #define OSD_TS_FT_BUS_ADDRESS 0 @@ -667,7 +670,7 @@ void am57x_idk_lcd_detect(void) struct udevice *dev; /* Only valid for IDKs */ - if (board_is_x15() || board_is_am572x_evm() || board_is_bbai()) + if (!board_is_ti_idk()) return; /* Only AM571x IDK has gpio control detect.. so check that */ diff --git a/board/ti/am65x/evm.c b/board/ti/am65x/evm.c index a22900d..20b75ba 100644 --- a/board/ti/am65x/evm.c +++ b/board/ti/am65x/evm.c @@ -108,10 +108,10 @@ int ft_board_setup(void *blob, bd_t *bd) } #if defined(CONFIG_TI_SECURE_DEVICE) - /* Make HW RNG reserved for secure world use */ - ret = fdt_disable_node(blob, "/interconnect@100000/trng@4e10000"); + /* Make Crypto HW reserved for secure world use */ + ret = fdt_disable_node(blob, "/interconnect@100000/crypto@4E00000"); if (ret) - printf("%s: disabling TRGN failed %d\n", __func__, ret); + printf("%s: disabling SA2UL failed %d\n", __func__, ret); #endif return 0; diff --git a/board/ti/common/board_detect.c b/board/ti/common/board_detect.c index 4296684..e09ecda 100644 --- a/board/ti/common/board_detect.c +++ b/board/ti/common/board_detect.c @@ -669,17 +669,17 @@ void __maybe_unused set_board_info_env(char *name) if (name) env_set("board_name", name); - else if (ep->name) + else if (strlen(ep->name) != 0) env_set("board_name", ep->name); else env_set("board_name", unknown); - if (ep->version) + if (strlen(ep->version) != 0) env_set("board_rev", ep->version); else env_set("board_rev", unknown); - if (ep->serial) + if (strlen(ep->serial) != 0) env_set("board_serial", ep->serial); else env_set("board_serial", unknown); @@ -692,22 +692,22 @@ void __maybe_unused set_board_info_env_am6(char *name) if (name) env_set("board_name", name); - else if (ep->name) + else if (strlen(ep->name) != 0) env_set("board_name", ep->name); else env_set("board_name", unknown); - if (ep->version) + if (strlen(ep->version) != 0) env_set("board_rev", ep->version); else env_set("board_rev", unknown); - if (ep->software_revision) + if (strlen(ep->software_revision) != 0) env_set("board_software_revision", ep->software_revision); else env_set("board_software_revision", unknown); - if (ep->serial) + if (strlen(ep->serial) != 0) env_set("board_serial", ep->serial); else env_set("board_serial", unknown); diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c index e35f319..319bb6a 100644 --- a/board/ti/omap5_uevm/evm.c +++ b/board/ti/omap5_uevm/evm.c @@ -12,6 +12,7 @@ #include <asm/arch/omap.h> #include <asm/arch/sys_proto.h> #include <asm/arch/mmc_host_def.h> +#include <serial.h> #include <tca642x.h> #include <usb.h> #include <linux/delay.h> @@ -149,39 +150,21 @@ int board_init(void) return 0; } -int board_eth_init(bd_t *bis) +#if defined(CONFIG_SPL_OS_BOOT) +int spl_start_uboot(void) { + /* break into full u-boot on 'c' */ + if (serial_tstc() && serial_getc() == 'c') + return 1; + return 0; } +#endif /* CONFIG_SPL_OS_BOOT */ -#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_XHCI_OMAP) -static void enable_host_clocks(void) +int board_eth_init(bd_t *bis) { - int auxclk; - int hs_clk_ctrl_val = (OPTFCLKEN_HSIC60M_P3_CLK | - OPTFCLKEN_HSIC480M_P3_CLK | - OPTFCLKEN_HSIC60M_P2_CLK | - OPTFCLKEN_HSIC480M_P2_CLK | - OPTFCLKEN_UTMI_P3_CLK | OPTFCLKEN_UTMI_P2_CLK); - - /* Enable port 2 and 3 clocks*/ - setbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl, hs_clk_ctrl_val); - - /* Enable port 2 and 3 usb host ports tll clocks*/ - setbits_le32((*prcm)->cm_l3init_hsusbtll_clkctrl, - (OPTFCLKEN_USB_CH1_CLK_ENABLE | OPTFCLKEN_USB_CH2_CLK_ENABLE)); -#ifdef CONFIG_USB_XHCI_OMAP - /* Enable the USB OTG Super speed clocks */ - setbits_le32((*prcm)->cm_l3init_usb_otg_ss_clkctrl, - (OPTFCLKEN_REFCLK960M | OTG_SS_CLKCTRL_MODULEMODE_HW)); -#endif - - auxclk = readl((*prcm)->scrm_auxclk1); - /* Request auxilary clock */ - auxclk |= AUXCLK_ENABLE_MASK; - writel(auxclk, (*prcm)->scrm_auxclk1); + return 0; } -#endif /** * @brief misc_init_r - Configure EVM board specific configurations @@ -223,45 +206,6 @@ int board_mmc_init(bd_t *bis) } #endif -#ifdef CONFIG_USB_EHCI_HCD -static struct omap_usbhs_board_data usbhs_bdata = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[1] = OMAP_EHCI_PORT_MODE_HSIC, - .port_mode[2] = OMAP_EHCI_PORT_MODE_HSIC, -}; - -int ehci_hcd_init(int index, enum usb_init_type init, - struct ehci_hccr **hccr, struct ehci_hcor **hcor) -{ - int ret; - - enable_host_clocks(); - - ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor); - if (ret < 0) { - puts("Failed to initialize ehci\n"); - return ret; - } - - return 0; -} - -int ehci_hcd_stop(void) -{ - return omap_ehci_hcd_stop(); -} - -void usb_hub_reset_devices(struct usb_hub_device *hub, int port) -{ - /* The LAN9730 needs to be reset after the port power has been set. */ - if (port == 3) { - gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 0); - udelay(10); - gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 1); - } -} -#endif - #ifdef CONFIG_USB_XHCI_OMAP /** * @brief board_usb_init - Configure EVM board specific configurations @@ -276,8 +220,6 @@ int board_usb_init(int index, enum usb_init_type init) ret = palmas_enable_ss_ldo(); #endif - enable_host_clocks(); - return 0; } #endif diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c index 9ebecfd..232d999 100644 --- a/board/ti/panda/panda.c +++ b/board/ti/panda/panda.c @@ -8,6 +8,7 @@ #include <init.h> #include <log.h> #include <net.h> +#include <serial.h> #include <asm/mach-types.h> #include <asm/arch/sys_proto.h> #include <asm/arch/mmc_host_def.h> @@ -19,12 +20,6 @@ #include "panda_mux_data.h" -#ifdef CONFIG_USB_EHCI_HCD -#include <usb.h> -#include <asm/arch/ehci.h> -#include <asm/ehci-omap.h> -#endif - #define PANDA_ULPI_PHY_TYPE_GPIO 182 #define PANDA_BOARD_ID_1_GPIO 101 #define PANDA_ES_BOARD_ID_1_GPIO 48 @@ -55,6 +50,17 @@ int board_init(void) return 0; } +#if defined(CONFIG_SPL_OS_BOOT) +int spl_start_uboot(void) +{ + /* break into full u-boot on 'c' */ + if (serial_tstc() && serial_getc() == 'c') + return 1; + + return 0; +} +#endif /* CONFIG_SPL_OS_BOOT */ + int board_eth_init(bd_t *bis) { return 0; @@ -305,38 +311,6 @@ void board_mmc_power_init(void) #endif #endif -#ifdef CONFIG_USB_EHCI_HCD - -static struct omap_usbhs_board_data usbhs_bdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, -}; - -int ehci_hcd_init(int index, enum usb_init_type init, - struct ehci_hccr **hccr, struct ehci_hcor **hcor) -{ - int ret; - unsigned int utmi_clk; - - /* Now we can enable our port clocks */ - utmi_clk = readl((void *)CM_L3INIT_HSUSBHOST_CLKCTRL); - utmi_clk |= HSUSBHOST_CLKCTRL_CLKSEL_UTMI_P1_MASK; - setbits_le32((void *)CM_L3INIT_HSUSBHOST_CLKCTRL, utmi_clk); - - ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor); - if (ret < 0) - return ret; - - return 0; -} - -int ehci_hcd_stop(int index) -{ - return omap_ehci_hcd_stop(); -} -#endif - /* * get_board_rev() - get board revision */ diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c index a5b3504..5b294ea 100644 --- a/board/ti/sdp4430/sdp.c +++ b/board/ti/sdp4430/sdp.c @@ -9,6 +9,7 @@ #include <init.h> #include <net.h> #include <twl6030.h> +#include <serial.h> #include <asm/arch/sys_proto.h> #include <asm/arch/mmc_host_def.h> @@ -91,6 +92,17 @@ void board_mmc_power_init(void) #endif #endif +#if defined(CONFIG_SPL_OS_BOOT) +int spl_start_uboot(void) +{ + /* break into full u-boot on 'c' */ + if (serial_tstc() && serial_getc() == 'c') + return 1; + + return 0; +} +#endif /* CONFIG_SPL_OS_BOOT */ + /* * get_board_rev() - get board revision */ |