aboutsummaryrefslogtreecommitdiff
path: root/board/intercontrol
diff options
context:
space:
mode:
Diffstat (limited to 'board/intercontrol')
-rw-r--r--board/intercontrol/digsy_mtc/Kconfig12
-rw-r--r--board/intercontrol/digsy_mtc/MAINTAINERS9
-rw-r--r--board/intercontrol/digsy_mtc/Makefile8
-rw-r--r--board/intercontrol/digsy_mtc/cmd_disp.c41
-rw-r--r--board/intercontrol/digsy_mtc/digsy_mtc.c477
-rw-r--r--board/intercontrol/digsy_mtc/eeprom.h18
-rw-r--r--board/intercontrol/digsy_mtc/is42s16800a-7t.h11
-rw-r--r--board/intercontrol/digsy_mtc/is45s16800a2.h15
8 files changed, 0 insertions, 591 deletions
diff --git a/board/intercontrol/digsy_mtc/Kconfig b/board/intercontrol/digsy_mtc/Kconfig
deleted file mode 100644
index 1cf2275..0000000
--- a/board/intercontrol/digsy_mtc/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_DIGSY_MTC
-
-config SYS_BOARD
- default "digsy_mtc"
-
-config SYS_VENDOR
- default "intercontrol"
-
-config SYS_CONFIG_NAME
- default "digsy_mtc"
-
-endif
diff --git a/board/intercontrol/digsy_mtc/MAINTAINERS b/board/intercontrol/digsy_mtc/MAINTAINERS
deleted file mode 100644
index c83ebcd..0000000
--- a/board/intercontrol/digsy_mtc/MAINTAINERS
+++ /dev/null
@@ -1,9 +0,0 @@
-DIGSY_MTC BOARD
-M: Werner Pfister <Pfister_Werner@intercontrol.de>
-S: Maintained
-F: board/intercontrol/digsy_mtc/
-F: include/configs/digsy_mtc.h
-F: configs/digsy_mtc_defconfig
-F: configs/digsy_mtc_RAMBOOT_defconfig
-F: configs/digsy_mtc_rev5_defconfig
-F: configs/digsy_mtc_rev5_RAMBOOT_defconfig
diff --git a/board/intercontrol/digsy_mtc/Makefile b/board/intercontrol/digsy_mtc/Makefile
deleted file mode 100644
index 4d13ead..0000000
--- a/board/intercontrol/digsy_mtc/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Author: Grzegorz Bernacki, Semihalf, gjb@semihalf.com
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := digsy_mtc.o
-obj-$(CONFIG_VIDEO) += cmd_disp.o
diff --git a/board/intercontrol/digsy_mtc/cmd_disp.c b/board/intercontrol/digsy_mtc/cmd_disp.c
deleted file mode 100644
index 2ffa8bf..0000000
--- a/board/intercontrol/digsy_mtc/cmd_disp.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * (C) Copyright 2011 DENX Software Engineering,
- * Anatolij Gustschin <agust@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <mpc5xxx.h>
-#include <asm/io.h>
-
-#define GPIO_USB1_0 0x00010000
-
-static int cmd_disp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
-
- if (argc < 2) {
- printf("%s\n",
- in_be32(&gpio->simple_dvo) & GPIO_USB1_0 ? "on" : "off");
- return 0;
- }
-
- if (!strncmp(argv[1], "on", 2)) {
- setbits_be32(&gpio->simple_dvo, GPIO_USB1_0);
- } else if (!strncmp(argv[1], "off", 3)) {
- clrbits_be32(&gpio->simple_dvo, GPIO_USB1_0);
- } else {
- cmd_usage(cmdtp);
- return 1;
- }
- return 0;
-}
-
-U_BOOT_CMD(disp, 2, 1, cmd_disp,
- "disp [on/off] - switch display on/off",
- "\n - print display on/off status\n"
- "on\n - turn on\n"
- "off\n - turn off\n"
-);
diff --git a/board/intercontrol/digsy_mtc/digsy_mtc.c b/board/intercontrol/digsy_mtc/digsy_mtc.c
deleted file mode 100644
index 6c33eeb..0000000
--- a/board/intercontrol/digsy_mtc/digsy_mtc.c
+++ /dev/null
@@ -1,477 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * (C) Copyright 2005-2009
- * Modified for InterControl digsyMTC MPC5200 board by
- * Frank Bodammer, GCD Hard- & Software GmbH,
- * frank.bodammer@gcd-solutions.de
- *
- * (C) Copyright 2009
- * Grzegorz Bernacki, Semihalf, gjb@semihalf.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <net.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include "eeprom.h"
-#if defined(CONFIG_DIGSY_REV5)
-#include "is45s16800a2.h"
-#include <mtd/cfi_flash.h>
-#include <flash.h>
-#else
-#include "is42s16800a-7t.h"
-#endif
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <i2c.h>
-#include <mb862xx.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern int usb_cpu_init(void);
-
-#if defined(CONFIG_DIGSY_REV5)
-/*
- * The M29W128GH needs a special reset command function,
- * details see the doc/README.cfi file
- */
-void flash_cmd_reset(flash_info_t *info)
-{
- flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
-}
-#endif
-
-#ifndef CONFIG_SYS_RAMBOOT
-static void sdram_start(int hi_addr)
-{
- long hi_addr_bit = hi_addr ? 0x01000000 : 0;
- long control = SDRAM_CONTROL | hi_addr_bit;
-
- /* unlock mode register */
- out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000000);
-
- /* precharge all banks */
- out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000002);
-
- /* auto refresh */
- out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000004);
-
- /* set mode register */
- out_be32((void *)MPC5XXX_SDRAM_MODE, SDRAM_MODE);
-
- /* normal operation */
- out_be32((void *)MPC5XXX_SDRAM_CTRL, control);
-}
-#endif
-
-/*
- * ATTENTION: Although partially referenced dram_init does NOT make real use
- * use of CONFIG_SYS_SDRAM_BASE. The code does not work if
- * CONFIG_SYS_SDRAM_BASE is something other than 0x00000000.
- */
-
-int dram_init(void)
-{
- ulong dramsize = 0;
- ulong dramsize2 = 0;
- uint svr, pvr;
-#ifndef CONFIG_SYS_RAMBOOT
- ulong test1, test2;
-
- /* setup SDRAM chip selects */
- out_be32((void *)MPC5XXX_SDRAM_CS0CFG, 0x0000001C); /* 512MB at 0x0 */
- out_be32((void *)MPC5XXX_SDRAM_CS1CFG, 0x80000000); /* disabled */
-
- /* setup config registers */
- out_be32((void *)MPC5XXX_SDRAM_CONFIG1, SDRAM_CONFIG1);
- out_be32((void *)MPC5XXX_SDRAM_CONFIG2, SDRAM_CONFIG2);
-
- /* find RAM size using SDRAM CS0 only */
- sdram_start(0);
- test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x08000000);
- sdram_start(1);
- test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x08000000);
- if (test1 > test2) {
- sdram_start(0);
- dramsize = test1;
- } else {
- dramsize = test2;
- }
-
- /* memory smaller than 1MB is impossible */
- if (dramsize < (1 << 20))
- dramsize = 0;
-
- /* set SDRAM CS0 size according to the amount of RAM found */
- if (dramsize > 0) {
- out_be32((void *)MPC5XXX_SDRAM_CS0CFG,
- (0x13 + __builtin_ffs(dramsize >> 20) - 1));
- } else {
- out_be32((void *)MPC5XXX_SDRAM_CS0CFG, 0); /* disabled */
- }
-
- /* let SDRAM CS1 start right after CS0 */
- out_be32((void *)MPC5XXX_SDRAM_CS1CFG, dramsize + 0x0000001C);
-
- /* find RAM size using SDRAM CS1 only */
- test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize),
- 0x08000000);
- dramsize2 = test1;
-
- /* memory smaller than 1MB is impossible */
- if (dramsize2 < (1 << 20))
- dramsize2 = 0;
-
- /* set SDRAM CS1 size according to the amount of RAM found */
- if (dramsize2 > 0) {
- out_be32((void *)MPC5XXX_SDRAM_CS1CFG, (dramsize |
- (0x13 + __builtin_ffs(dramsize2 >> 20) - 1)));
- } else {
- out_be32((void *)MPC5XXX_SDRAM_CS1CFG, dramsize); /* disabled */
- }
-
-#else /* CONFIG_SYS_RAMBOOT */
-
- /* retrieve size of memory connected to SDRAM CS0 */
- dramsize = in_be32((void *)MPC5XXX_SDRAM_CS0CFG) & 0xFF;
- if (dramsize >= 0x13)
- dramsize = (1 << (dramsize - 0x13)) << 20;
- else
- dramsize = 0;
-
- /* retrieve size of memory connected to SDRAM CS1 */
- dramsize2 = in_be32((void *)MPC5XXX_SDRAM_CS1CFG) & 0xFF;
- if (dramsize2 >= 0x13)
- dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
- else
- dramsize2 = 0;
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
- /*
- * On MPC5200B we need to set the special configuration delay in the
- * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
- * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
- *
- * "The SDelay should be written to a value of 0x00000004. It is
- * required to account for changes caused by normal wafer processing
- * parameters."
- */
- svr = get_svr();
- pvr = get_pvr();
- if ((SVR_MJREV(svr) >= 2) &&
- (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4))
- out_be32((void *)MPC5XXX_SDRAM_SDELAY, 0x04);
-
- gd->ram_size = dramsize + dramsize2;
-
- return 0;
-}
-
-int checkboard(void)
-{
- char buf[64];
- int i = getenv_f("serial#", buf, sizeof(buf));
-
- puts ("Board: InterControl digsyMTC");
-#if defined(CONFIG_DIGSY_REV5)
- puts (" rev5");
-#endif
- if (i > 0) {
- puts(", ");
- puts(buf);
- }
- putc('\n');
-
- return 0;
-}
-
-#if defined(CONFIG_VIDEO)
-
-#define GPIO_USB1_0 0x00010000 /* Power-On pin */
-#define GPIO_USB1_9 0x08 /* PX_~EN pin */
-
-#define GPIO_EE_DO 0x10 /* PSC6_0 (DO) pin */
-#define GPIO_EE_CTS 0x20 /* PSC6_1 (CTS) pin */
-#define GPIO_EE_DI 0x10000000 /* PSC6_2 (DI) pin */
-#define GPIO_EE_CLK 0x20000000 /* PSC6_3 (CLK) pin */
-
-#define GPT_GPIO_ON 0x00000034 /* GPT as simple GPIO, high */
-
-static void exbo_hw_init(void)
-{
- struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt *)MPC5XXX_GPT;
- struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
- struct mpc5xxx_wu_gpio *wu_gpio =
- (struct mpc5xxx_wu_gpio *)MPC5XXX_WU_GPIO;
-
- /* configure IrDA pins (PSC6 port) as gpios */
- gpio->port_config &= 0xFF8FFFFF;
-
- /* Init for USB1_0, EE_CLK and EE_DI - Low */
- setbits_be32(&gpio->simple_ddr,
- GPIO_USB1_0 | GPIO_EE_CLK | GPIO_EE_DI);
- clrbits_be32(&gpio->simple_ode,
- GPIO_USB1_0 | GPIO_EE_CLK | GPIO_EE_DI);
- clrbits_be32(&gpio->simple_dvo,
- GPIO_USB1_0 | GPIO_EE_CLK | GPIO_EE_DI);
- setbits_be32(&gpio->simple_gpioe,
- GPIO_USB1_0 | GPIO_EE_CLK | GPIO_EE_DI);
-
- /* Init for EE_DO, EE_CTS - Input */
- clrbits_8(&wu_gpio->ddr, GPIO_EE_DO | GPIO_EE_CTS);
- setbits_8(&wu_gpio->enable, GPIO_EE_DO | GPIO_EE_CTS);
-
- /* Init for PX_~EN (USB1_9) - High */
- clrbits_8(&gpio->sint_ode, GPIO_USB1_9);
- setbits_8(&gpio->sint_ddr, GPIO_USB1_9);
- clrbits_8(&gpio->sint_inten, GPIO_USB1_9);
- setbits_8(&gpio->sint_dvo, GPIO_USB1_9);
- setbits_8(&gpio->sint_gpioe, GPIO_USB1_9);
-
- /* Init for ~OE Switch (GPIO3) - Timer_0 GPIO High */
- out_be32(&gpt[0].emsr, GPT_GPIO_ON);
- /* Init for S Switch (GPIO4) - Timer_1 GPIO High */
- out_be32(&gpt[1].emsr, GPT_GPIO_ON);
-
- /* Power-On camera supply */
- setbits_be32(&gpio->simple_dvo, GPIO_USB1_0);
-}
-#else
-static inline void exbo_hw_init(void) {}
-#endif /* CONFIG_VIDEO */
-
-int board_early_init_r(void)
-{
- /*
- * Now, when we are in RAM, enable flash write access for detection
- * process. Note that CS_BOOT cannot be cleared when executing in
- * flash.
- */
- /* disable CS_BOOT */
- clrbits_be32((void *)MPC5XXX_ADDECR, (1 << 25));
- /* enable CS1 */
- setbits_be32((void *)MPC5XXX_ADDECR, (1 << 17));
- /* enable CS0 */
- setbits_be32((void *)MPC5XXX_ADDECR, (1 << 16));
-
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
- /* Low level USB init, required for proper kernel operation */
- usb_cpu_init();
-#endif
-
- return (0);
-}
-
-void board_get_enetaddr (uchar * enet)
-{
- ushort read = 0;
- ushort addr_of_eth_addr = 0;
- ushort len_sys = 0;
- ushort len_sys_cfg = 0;
-
- /* check identification word */
- eeprom_read(EEPROM_ADDR, EEPROM_ADDR_IDENT, (uchar *)&read, 2);
- if (read != EEPROM_IDENT)
- return;
-
- /* calculate offset of config area */
- eeprom_read(EEPROM_ADDR, EEPROM_ADDR_LEN_SYS, (uchar *)&len_sys, 2);
- eeprom_read(EEPROM_ADDR, EEPROM_ADDR_LEN_SYSCFG,
- (uchar *)&len_sys_cfg, 2);
- addr_of_eth_addr = (len_sys + len_sys_cfg + EEPROM_ADDR_ETHADDR) << 1;
- if (addr_of_eth_addr >= EEPROM_LEN)
- return;
-
- eeprom_read(EEPROM_ADDR, addr_of_eth_addr, enet, 6);
-}
-
-int misc_init_r(void)
-{
- pci_dev_t devbusfn;
- uchar enetaddr[6];
-
- /* check if graphic extension board is present */
- devbusfn = pci_find_device(PCI_VENDOR_ID_FUJITSU,
- PCI_DEVICE_ID_CORAL_PA, 0);
- if (devbusfn != -1)
- exbo_hw_init();
-
- if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
- board_get_enetaddr(enetaddr);
- eth_setenv_enetaddr("ethaddr", enetaddr);
- }
-
- return 0;
-}
-
-#ifdef CONFIG_PCI
-static struct pci_controller hose;
-
-extern void pci_mpc5xxx_init(struct pci_controller *);
-
-void pci_init_board(void)
-{
- pci_mpc5xxx_init(&hose);
-}
-#endif
-
-#ifdef CONFIG_IDE
-
-#ifdef CONFIG_IDE_RESET
-
-void init_ide_reset(void)
-{
- debug ("init_ide_reset\n");
-
- /* set gpio output value to 1 */
- setbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, (1 << 25));
- /* open drain output */
- setbits_be32((void *)MPC5XXX_WU_GPIO_ODE, (1 << 25));
- /* direction output */
- setbits_be32((void *)MPC5XXX_WU_GPIO_DIR, (1 << 25));
- /* enable gpio */
- setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, (1 << 25));
-
-}
-
-void ide_set_reset(int idereset)
-{
- debug ("ide_reset(%d)\n", idereset);
-
- /* set gpio output value to 0 */
- clrbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, (1 << 25));
- /* open drain output */
- setbits_be32((void *)MPC5XXX_WU_GPIO_ODE, (1 << 25));
- /* direction output */
- setbits_be32((void *)MPC5XXX_WU_GPIO_DIR, (1 << 25));
- /* enable gpio */
- setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, (1 << 25));
-
- udelay(10000);
-
- /* set gpio output value to 1 */
- setbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, (1 << 25));
- /* open drain output */
- setbits_be32((void *)MPC5XXX_WU_GPIO_ODE, (1 << 25));
- /* direction output */
- setbits_be32((void *)MPC5XXX_WU_GPIO_DIR, (1 << 25));
- /* enable gpio */
- setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, (1 << 25));
-}
-#endif /* CONFIG_IDE_RESET */
-#endif /* CONFIG_IDE */
-
-#ifdef CONFIG_OF_BOARD_SETUP
-static void ft_delete_node(void *fdt, const char *compat)
-{
- int off = -1;
- int ret;
-
- off = fdt_node_offset_by_compatible(fdt, -1, compat);
- if (off < 0) {
- printf("Could not find %s node.\n", compat);
- return;
- }
-
- ret = fdt_del_node(fdt, off);
- if (ret < 0)
- printf("Could not delete %s node.\n", compat);
-}
-#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE)
-static void ft_adapt_flash_base(void *blob)
-{
- flash_info_t *dev = &flash_info[0];
- int off;
- struct fdt_property *prop;
- int len;
- u32 *reg, *reg2;
-
- off = fdt_node_offset_by_compatible(blob, -1, "fsl,mpc5200b-lpb");
- if (off < 0) {
- printf("Could not find fsl,mpc5200b-lpb node.\n");
- return;
- }
-
- /* found compatible property */
- prop = fdt_get_property_w(blob, off, "ranges", &len);
- if (prop) {
- reg = reg2 = (u32 *)&prop->data[0];
-
- reg[2] = dev->start[0];
- reg[3] = dev->size;
- fdt_setprop(blob, off, "ranges", reg2, len);
- } else
- printf("Could not find ranges\n");
-}
-
-extern ulong flash_get_size (phys_addr_t base, int banknum);
-
-/* Update the Flash Baseaddr settings */
-int update_flash_size (int flash_size)
-{
- volatile struct mpc5xxx_mmap_ctl *mm =
- (struct mpc5xxx_mmap_ctl *) CONFIG_SYS_MBAR;
- flash_info_t *dev;
- int i;
- int size = 0;
- unsigned long base = 0x0;
- u32 *cs_reg = (u32 *)&mm->cs0_start;
-
- for (i = 0; i < 2; i++) {
- dev = &flash_info[i];
-
- if (dev->size) {
- /* calculate new base addr for this chipselect */
- base -= dev->size;
- out_be32(cs_reg, START_REG(base));
- cs_reg++;
- out_be32(cs_reg, STOP_REG(base, dev->size));
- cs_reg++;
- /* recalculate the sectoraddr in the cfi driver */
- size += flash_get_size(base, i);
- }
- }
- flash_protect_default();
- gd->bd->bi_flashstart = base;
- return 0;
-}
-#endif /* defined(CONFIG_SYS_UPDATE_FLASH_SIZE) */
-
-int ft_board_setup(void *blob, bd_t *bd)
-{
- int phy_addr = CONFIG_PHY_ADDR;
- char eth_path[] = "/soc5200@f0000000/mdio@3000/ethernet-phy@0";
-
- ft_cpu_setup(blob, bd);
- /*
- * There are 2 RTC nodes in the DTS, so remove
- * the unneeded node here.
- */
-#if defined(CONFIG_DIGSY_REV5)
- ft_delete_node(blob, "dallas,ds1339");
-#else
- ft_delete_node(blob, "mc,rv3029c2");
-#endif
-#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE)
-#ifdef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
- /* Update reg property in all nor flash nodes too */
- fdt_fixup_nor_flash_size(blob);
-#endif
- ft_adapt_flash_base(blob);
-#endif
- /* fix up the phy address */
- do_fixup_by_path(blob, eth_path, "reg", &phy_addr, sizeof(int), 0);
-
- return 0;
-}
-#endif /* CONFIG_OF_BOARD_SETUP */
diff --git a/board/intercontrol/digsy_mtc/eeprom.h b/board/intercontrol/digsy_mtc/eeprom.h
deleted file mode 100644
index 17bd034..0000000
--- a/board/intercontrol/digsy_mtc/eeprom.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * (C) Copyright 2009 Semihalf.
- * Written by: Grzegorz Bernacki <gjb@semihalf.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef CMD_EEPROM_H
-#define CMD_EEPROM_H
-
-#define EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR
-#define EEPROM_LEN 1024 /* eeprom length */
-#define EEPROM_IDENT 2408 /* identification word */
-#define EEPROM_ADDR_IDENT 0 /* identification word offset */
-#define EEPROM_ADDR_LEN_SYS 2 /* system area lenght offset */
-#define EEPROM_ADDR_LEN_SYSCFG 4 /* system config area length offset */
-#define EEPROM_ADDR_ETHADDR 23 /* ethernet address offset */
-
-#endif
diff --git a/board/intercontrol/digsy_mtc/is42s16800a-7t.h b/board/intercontrol/digsy_mtc/is42s16800a-7t.h
deleted file mode 100644
index c555d2d..0000000
--- a/board/intercontrol/digsy_mtc/is42s16800a-7t.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * (C) Copyright 2004-2009
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#define SDRAM_MODE 0x00CD0000
-#define SDRAM_CONTROL 0x505F0000
-#define SDRAM_CONFIG1 0xD2322900
-#define SDRAM_CONFIG2 0x8AD70000
diff --git a/board/intercontrol/digsy_mtc/is45s16800a2.h b/board/intercontrol/digsy_mtc/is45s16800a2.h
deleted file mode 100644
index c42ba38..0000000
--- a/board/intercontrol/digsy_mtc/is45s16800a2.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * (C) Copyright 2010
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * based on:
- * (C) Copyright 2004-2009
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#define SDRAM_MODE 0x00CD0000
-#define SDRAM_CONTROL 0x50470000
-#define SDRAM_CONFIG1 0xD2322900
-#define SDRAM_CONFIG2 0x8AD70000
generated by cgit v1.1 at 2024-08-14 03:42:40 +0000